mysql-test/r/mysqld_option_err.result:
Test that mysqld --not-known-option --help --verbose gives error
mysql-test/t/mysqld_option_err.test:
Test that mysqld --not-known-option --help --verbose gives error
http://lists.mysql.com/commits/59686
Cleanup pthread_self(), pthread_create(), pthread_join() implementation on Windows.
Prior implementation is was unnecessarily complicated and even differs in embedded
and non-embedded case.
Improvements in this patch:
* pthread_t is now the unique thread ID, instead of HANDLE returned by beginthread
This simplifies pthread_self() to be just straight GetCurrentThreadId().
prior it was much art involved in passing the beginthread() handle from the caller
to the TLS structure in the child thread ( did not work for the main thread of
course)
* remove MySQL specific my_thread_init()/my_thread_end() from pthread_create.
No automagic is done on Unix on pthread_create(). Having the same on Windows will
improve portability and avoid extra #ifdef's
* remove redefinition of getpid() - it was defined as GetCurrentThreadId()
http://lists.mysql.com/commits/59686
Cleanup pthread_self(), pthread_create(), pthread_join() implementation on Windows.
Prior implementation is was unnecessarily complicated and even differs in embedded
and non-embedded case.
Improvements in this patch:
* pthread_t is now the unique thread ID, instead of HANDLE returned by beginthread
This simplifies pthread_self() to be just straight GetCurrentThreadId().
prior it was much art involved in passing the beginthread() handle from the caller
to the TLS structure in the child thread ( did not work for the main thread of
course)
* remove MySQL specific my_thread_init()/my_thread_end() from pthread_create.
No automagic is done on Unix on pthread_create(). Having the same on Windows will
improve portability and avoid extra #ifdef's
* remove redefinition of getpid() - it was defined as GetCurrentThreadId()
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
NOTE: Backporting the patch to next-mr.
The fix proposed in BUG#35542 and BUG#31665 introduces a performance issue
when fsyncing the master.info, relay.info and relay-log.bin* after #th events.
Although such solution has been proposed to reduce the probability of corrupted
files due to a slave-crash, the performance penalty introduced by it has
made the approach impractical for highly intensive workloads.
In a nutshell, the option --syn-relay-log proposed in BUG#35542 and BUG#31665
simultaneously fsyncs master.info, relay-log.info and relay-log.bin* and
this is the main source of performance issues.
This patch introduces new options that give more control to the user on
what should be fsynced and how often:
1) (--sync-master-info, integer) which syncs the master.info after #th event;
2) (--sync-relay-log, integer) which syncs the relay-log.bin* after #th
events.
3) (--sync-relay-log-info, integer) which syncs the relay.info after #th
transactions.
To provide both performance and increased reliability, we recommend the following
setup:
1) --sync-master-info = 0 eventually the operating system will fsync it;
2) --sync-relay-log = 0 eventually the operating system will fsync it;
3) --sync-relay-log-info = 1 fsyncs it after every transaction;
Notice, that the previous setup does not reduce the probability of
corrupted master.info and relay-log.bin*. To overcome the issue, this patch also
introduces a recovery mechanism that right after restart throws away relay-log.bin*
retrieved from a master and updates the master.info based on the relay.info:
4) (--relay-log-recovery, boolean) which enables a recovery mechanism that
throws away relay-log.bin* after a crash.
However, it can only recover the incorrect binlog file and position in master.info,
if other informations (host, port password, etc) are corrupted or incorrect,
then this recovery mechanism will fail to work.
NOTE: Backporting the patch to next-mr.
The fix proposed in BUG#35542 and BUG#31665 introduces a performance issue
when fsyncing the master.info, relay.info and relay-log.bin* after #th events.
Although such solution has been proposed to reduce the probability of corrupted
files due to a slave-crash, the performance penalty introduced by it has
made the approach impractical for highly intensive workloads.
In a nutshell, the option --syn-relay-log proposed in BUG#35542 and BUG#31665
simultaneously fsyncs master.info, relay-log.info and relay-log.bin* and
this is the main source of performance issues.
This patch introduces new options that give more control to the user on
what should be fsynced and how often:
1) (--sync-master-info, integer) which syncs the master.info after #th event;
2) (--sync-relay-log, integer) which syncs the relay-log.bin* after #th
events.
3) (--sync-relay-log-info, integer) which syncs the relay.info after #th
transactions.
To provide both performance and increased reliability, we recommend the following
setup:
1) --sync-master-info = 0 eventually the operating system will fsync it;
2) --sync-relay-log = 0 eventually the operating system will fsync it;
3) --sync-relay-log-info = 1 fsyncs it after every transaction;
Notice, that the previous setup does not reduce the probability of
corrupted master.info and relay-log.bin*. To overcome the issue, this patch also
introduces a recovery mechanism that right after restart throws away relay-log.bin*
retrieved from a master and updates the master.info based on the relay.info:
4) (--relay-log-recovery, boolean) which enables a recovery mechanism that
throws away relay-log.bin* after a crash.
However, it can only recover the incorrect binlog file and position in master.info,
if other informations (host, port password, etc) are corrupted or incorrect,
then this recovery mechanism will fail to work.
BUG#31665 sync_binlog should cause relay logs to be synchronized
NOTE: Backporting the patch to next-mr.
Add sync_relay_log option to server, this option works for relay log
the same as option sync_binlog for binlog. This option also synchronize
master info to disk when set to non-zero value.
Original patches from Sinisa and Mark, with some modifications
BUG#31665 sync_binlog should cause relay logs to be synchronized
NOTE: Backporting the patch to next-mr.
Add sync_relay_log option to server, this option works for relay log
the same as option sync_binlog for binlog. This option also synchronize
master info to disk when set to non-zero value.
Original patches from Sinisa and Mark, with some modifications
logging is disabled
NOTE: this is the backport to next-mr.
If one sets binlog-format but does NOT enable binary log, server
refuses to start up. The following messages appears in the error log:
090217 12:47:14 [ERROR] You need to use --log-bin to make
--binlog-format work.
090217 12:47:14 [ERROR] Aborting
This patch addresses this by making the server not to bail out if the
binlog-format is set without the log-bin option. Additionally, the
specified binlog-format is stored, in the global system variable
"binlog_format", and a warning is printed instead of an error.
logging is disabled
NOTE: this is the backport to next-mr.
If one sets binlog-format but does NOT enable binary log, server
refuses to start up. The following messages appears in the error log:
090217 12:47:14 [ERROR] You need to use --log-bin to make
--binlog-format work.
090217 12:47:14 [ERROR] Aborting
This patch addresses this by making the server not to bail out if the
binlog-format is set without the log-bin option. Additionally, the
specified binlog-format is stored, in the global system variable
"binlog_format", and a warning is printed instead of an error.
STATUS'
NOTE: this is the backport to next-mr.
SHOW SHOW STATUS LIKE 'Slave_running' command believes that
if active_mi->slave_running != 0, then io thread is running normally.
But it isn't so in fact. When some errors happen to make io thread
try to reconnect master, then it will become transitional status
(MYSQL_SLAVE_RUN_NOT_CONNECT == 1), which also doesn't equal 0.
Yet, "SHOW SLAVE STATUS" believes that only if
active_mi->slave_running == MYSQL_SLAVE_RUN_CONNECT, then io thread is running.
So "SHOW SLAVE STATUS" can get the correct result.
Fixed to make SHOW SHOW STATUS LIKE 'Slave_running' command have the same
check condition with "SHOW SLAVE STATUS". It only believe that the io thread
is running when active_mi->slave_running == MYSQL_SLAVE_RUN_CONNECT.
STATUS'
NOTE: this is the backport to next-mr.
SHOW SHOW STATUS LIKE 'Slave_running' command believes that
if active_mi->slave_running != 0, then io thread is running normally.
But it isn't so in fact. When some errors happen to make io thread
try to reconnect master, then it will become transitional status
(MYSQL_SLAVE_RUN_NOT_CONNECT == 1), which also doesn't equal 0.
Yet, "SHOW SLAVE STATUS" believes that only if
active_mi->slave_running == MYSQL_SLAVE_RUN_CONNECT, then io thread is running.
So "SHOW SLAVE STATUS" can get the correct result.
Fixed to make SHOW SHOW STATUS LIKE 'Slave_running' command have the same
check condition with "SHOW SLAVE STATUS". It only believe that the io thread
is running when active_mi->slave_running == MYSQL_SLAVE_RUN_CONNECT.
NOTE: Backporting the patch to next-mr.
The use of option log_slave_updates without log_bin was preventing the server
from starting. To fix the problem, we replaced the error message and the exit
call by a warning message.
NOTE: Backporting the patch to next-mr.
The use of option log_slave_updates without log_bin was preventing the server
from starting. To fix the problem, we replaced the error message and the exit
call by a warning message.
files
NOTE: this is the backport to next-mr.
SHOW BINLOG EVENTS does not work with relay log files. If issuing
"SHOW BINLOG EVENTS IN 'relay-log.000001'" in a non-empty relay
log file (relay-log.000001), mysql reports empty set.
This patch addresses this issue by extending the SHOW command
with RELAYLOG. Events in relay log files can now be inspected by
issuing SHOW RELAYLOG EVENTS [IN 'log_name'] [FROM pos] [LIMIT
[offset,] row_count].
mysql-test/extra/rpl_tests/rpl_show_relaylog_events.inc:
Shared part of the test case.
mysql-test/include/show_binlog_events.inc:
Added options $binary_log_file, $binary_log_limit_row,
$binary_log_limit_offset so that show_binlog_events can take
same parameters as SHOW BINLOG EVENTS does.
mysql-test/include/show_relaylog_events.inc:
Clone of show_binlog_events for relaylog events.
mysql-test/suite/rpl/t/rpl_row_show_relaylog_events.test:
Test case for row based replication.
mysql-test/suite/rpl/t/rpl_stm_mix_show_relaylog_events.test:
Test case for statement and mixed mode replication.
sql/lex.h:
Added RELAYLOG symbol.
sql/mysqld.cc:
Added "show_relaylog_events" to status_vars.
sql/sp_head.cc:
Set SQLCOM_SHOW_RELAYLOG_EVENTS to return flags=
sp_head::MULTI_RESULTS; in sp_get_flags_for_command as
SQLCOM_SHOW_BINLOG_EVENTS does.
sql/sql_lex.h:
Added sql_command SQLCOM_SHOW_RELAYLOG_EVENTS to lex enum_sql_command.
sql/sql_parse.cc:
Added handling of SQLCOM_SHOW_RELAYLOG_EVENTS.
sql/sql_repl.cc:
mysql_show_binlog_events set to choose the log file to use based on
the command issued (SHOW BINLOG|RELAYLOG EVENTS).
sql/sql_yacc.yy:
Added RELAYLOG to the grammar.
files
NOTE: this is the backport to next-mr.
SHOW BINLOG EVENTS does not work with relay log files. If issuing
"SHOW BINLOG EVENTS IN 'relay-log.000001'" in a non-empty relay
log file (relay-log.000001), mysql reports empty set.
This patch addresses this issue by extending the SHOW command
with RELAYLOG. Events in relay log files can now be inspected by
issuing SHOW RELAYLOG EVENTS [IN 'log_name'] [FROM pos] [LIMIT
[offset,] row_count].
when compiled with Sun Studio compiler).
The thing is that Sun Studio compiler calls destructor of stack
objects when pthread_exit() is called. That triggered an assertion
in DBUG_ENTER()/DBUG_RETURN() validation logic (if DBUG_ENTER() is
used in the beginning of function, all returns should be replaced
by DBUG_RETURN/DBUG_VOID_RETURN macros).
A fix is to explicitly use DBUG_LEAVE macro.
when compiled with Sun Studio compiler).
The thing is that Sun Studio compiler calls destructor of stack
objects when pthread_exit() is called. That triggered an assertion
in DBUG_ENTER()/DBUG_RETURN() validation logic (if DBUG_ENTER() is
used in the beginning of function, all returns should be replaced
by DBUG_RETURN/DBUG_VOID_RETURN macros).
A fix is to explicitly use DBUG_LEAVE macro.
When parsing the service installation parameter in
default_service_handling() make sure the value of the
optional parameter doesn't overwrite it's name.
When parsing the service installation parameter in
default_service_handling() make sure the value of the
optional parameter doesn't overwrite it's name.
