DECIMAL and TIMESTAMP used to have NUM_FLAG, but NEWDECIMAL was forgotten.
It's correct that TIMESTAMP does not have the flag nowadays (manual will be updated, connectors
developers will be notified).
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
Failing to connect would release parts of the MYSQL struct.
We would then proceed to try again to connect without re-
initializing the struct.
We prevent the unwanted freeing of data we'll still need now.
client/mysqladmin.cc:
Losing a connection (or not even getting on in the first place) should
not trash the MYSQL-struct.
Add a lot of comments.
Rewrite re-connection fu.
sql-common/client.c:
Assert against bad parameters usually caused by de-initing a
MYSQL-struct without re-initing it again before re-use.
Failing to connect would release parts of the MYSQL struct.
We would then proceed to try again to connect without re-
initializing the struct.
We prevent the unwanted freeing of data we'll still need now.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
client/mysqlmanager-pwgen.c:
A fix for warn_unused_result, adding fallback to use of
srand()/rand() if /dev/random cannot be used. Also actually
adds calls to rand() in the second branch so that it actually
creates a random password.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
sql/opt_range.cc:
Removed duplicate code (if statement must have been duplicated during earlier merge).
sql/sql_partition.cc:
After mergeing bug#46362 and bug#20577, the NULL partition was also searched
when col = const, fixed by checking if = or range.
There were a problem since pruning uses the field
for comparison (while evaluate_join_record uses longlong),
resulting in pruning failures when comparing DATE to DATETIME.
Fix was to always comparing DATE vs DATETIME as DATETIME,
by adding ' 00:00:00' to the DATE string.
And adding optimization for comparing with 23:59:59, so that
DATETIME_col > '2001-02-03 23:59:59' ->
TO_DAYS(DATETIME_col) > TO_DAYS('2001-02-03 23:59:59') instead
of '>='.
mysql-test/r/partition_pruning.result:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Updated result-file
mysql-test/t/partition_pruning.test:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Added testcases.
sql-common/my_time.c:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
removed duplicate assignment.
sql/item.cc:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Changed field_is_equal_to_item into field_cmp_to_item, to
better handling DATE vs DATETIME comparision.
sql/item.h:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Updated comment
sql/item_timefunc.cc:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Added optimization (pruning) of DATETIME where time-part is
23:59:59
sql/opt_range.cc:
Bug#46362: Endpoint should be set to false for TO_DAYS(DATE)
Using the new stored_field_cmp_to_item for better pruning.
There were a problem since pruning uses the field
for comparison (while evaluate_join_record uses longlong),
resulting in pruning failures when comparing DATE to DATETIME.
Fix was to always comparing DATE vs DATETIME as DATETIME,
by adding ' 00:00:00' to the DATE string.
And adding optimization for comparing with 23:59:59, so that
DATETIME_col > '2001-02-03 23:59:59' ->
TO_DAYS(DATETIME_col) > TO_DAYS('2001-02-03 23:59:59') instead
of '>='.
Bug#45243: crash on win in sql thread clear_tables_to_lock() -> free()
Bug#45242: crash on win in mysql_close() -> free()
Bug#45238: rpl_slave_skip, rpl_change_master failed (lost connection) for STOP SLAVE
Bug#46030: rpl_truncate_3innodb causes server crash on windows
Bug#46014: rpl_stm_reset_slave crashes the server sporadically in pb2
When killing a user session on the server, it's necessary to
interrupt (notify) the thread associated with the session that
the connection is being killed so that the thread is woken up
if waiting for I/O. On a few platforms (Mac, Windows and HP-UX)
where the SIGNAL_WITH_VIO_CLOSE flag is defined, this interruption
procedure is to asynchronously close the underlying socket of
the connection.
In order to enable this schema, each connection serving thread
registers its VIO (I/O interface) so that other threads can
access it and close the connection. But only the owner thread of
the VIO might delete it as to guarantee that other threads won't
see freed memory (the thread unregisters the VIO before deleting
it). A side note: closing the socket introduces a harmless race
that might cause a thread attempt to read from a closed socket,
but this is deemed acceptable.
The problem is that this infrastructure was meant to only be used
by server threads, but the slave I/O thread was registering the
VIO of a mysql handle (a client API structure that represents a
connection to another server instance) as a active connection of
the thread. But under some circumstances such as network failures,
the client API might destroy the VIO associated with a handle at
will, yet the VIO wouldn't be properly unregistered. This could
lead to accesses to freed data if a thread attempted to kill a
slave I/O thread whose connection was already broken.
There was a attempt to work around this by checking whether
the socket was being interrupted, but this hack didn't work as
intended due to the aforementioned race -- attempting to read
from the socket would yield a "bad file descriptor" error.
The solution is to add a hook to the client API that is called
from the client code before the VIO of a handle is deleted.
This hook allows the slave I/O thread to detach the active vio
so it does not point to freed memory.
server-tools/instance-manager/mysql_connection.cc:
Add stub method required for linking.
sql-common/client.c:
Invoke hook.
sql/client_settings.h:
Export hook.
sql/slave.cc:
Introduce hook that clears the active VIO before it is freed
by the client API.
Bug#45243: crash on win in sql thread clear_tables_to_lock() -> free()
Bug#45242: crash on win in mysql_close() -> free()
Bug#45238: rpl_slave_skip, rpl_change_master failed (lost connection) for STOP SLAVE
Bug#46030: rpl_truncate_3innodb causes server crash on windows
Bug#46014: rpl_stm_reset_slave crashes the server sporadically in pb2
When killing a user session on the server, it's necessary to
interrupt (notify) the thread associated with the session that
the connection is being killed so that the thread is woken up
if waiting for I/O. On a few platforms (Mac, Windows and HP-UX)
where the SIGNAL_WITH_VIO_CLOSE flag is defined, this interruption
procedure is to asynchronously close the underlying socket of
the connection.
In order to enable this schema, each connection serving thread
registers its VIO (I/O interface) so that other threads can
access it and close the connection. But only the owner thread of
the VIO might delete it as to guarantee that other threads won't
see freed memory (the thread unregisters the VIO before deleting
it). A side note: closing the socket introduces a harmless race
that might cause a thread attempt to read from a closed socket,
but this is deemed acceptable.
The problem is that this infrastructure was meant to only be used
by server threads, but the slave I/O thread was registering the
VIO of a mysql handle (a client API structure that represents a
connection to another server instance) as a active connection of
the thread. But under some circumstances such as network failures,
the client API might destroy the VIO associated with a handle at
will, yet the VIO wouldn't be properly unregistered. This could
lead to accesses to freed data if a thread attempted to kill a
slave I/O thread whose connection was already broken.
There was a attempt to work around this by checking whether
the socket was being interrupted, but this hack didn't work as
intended due to the aforementioned race -- attempting to read
from the socket would yield a "bad file descriptor" error.
The solution is to add a hook to the client API that is called
from the client code before the VIO of a handle is deleted.
This hook allows the slave I/O thread to detach the active vio
so it does not point to freed memory.
The problem is that the C API function mysql_real_connect
only attempts to connect to the first IP address returned
for a hostname. This can be a problem if a hostname maps
to multiple IP address and the server is not bound to the
first one that is returned.
The solution is to augment mysql_real_connect so that it
attempts to connect to all IPv4 addresses that a domain
name maps to. The function goes over the list of address
until a successful connection is established.
No test case is provided as its not possible to test this
automatically with the current testing infrastructure.
sql-common/client.c:
The client will try to connect to each IPv4 address from
the list of addresses that hostname maps to until a successful
connection is established or there are no more address.
The problem is that the C API function mysql_real_connect
only attempts to connect to the first IP address returned
for a hostname. This can be a problem if a hostname maps
to multiple IP address and the server is not bound to the
first one that is returned.
The solution is to augment mysql_real_connect so that it
attempts to connect to all IPv4 addresses that a domain
name maps to. The function goes over the list of address
until a successful connection is established.
No test case is provided as its not possible to test this
automatically with the current testing infrastructure.
Fix sleep() synchronisation in innodb_information_schema test case.
mysql-test/t/innodb_information_schema.test:
Using sleep for synchronisation does not work!!!
Replace by looping until the required condition is met.
sql-common/client.c:
mysql_ssl_set() did not free old pointers before overwriting with new ones (happens when
mysql_ssl_set() is called twice without calling mysql_close() in-between).
This sometimes caused memory leaks in the slave depending on exact timing of
master/slave shutdown.
Fixed by freeing old pointers before installing new ones in mysql_ssl_set(), just like
mysql_options() does.
Backport to MySQL 5.0/1 fix by Vladislav Vaintroub:
In Vista and later and also in when using terminal services, when
server is started from command line, client cannot connect to it
via shared memory protocol.
This is a regression introduced when Bug#24731 was fixed. The
reason is that client is trying to attach to shared memory using
global kernel object namespace (all kernel objects are prefixed
with Global\). However, server started from the command line in
Vista and later will create shared memory and events using current
session namespace. Thus, client is unable to find the server and
connection fails.
The fix for the client is to first try to find server using "local"
names (omitting Global\ prefix) and only if server is not found,
trying global namespace.
Backport to MySQL 5.0/1 fix by Vladislav Vaintroub:
In Vista and later and also in when using terminal services, when
server is started from command line, client cannot connect to it
via shared memory protocol.
This is a regression introduced when Bug#24731 was fixed. The
reason is that client is trying to attach to shared memory using
global kernel object namespace (all kernel objects are prefixed
with Global\). However, server started from the command line in
Vista and later will create shared memory and events using current
session namespace. Thus, client is unable to find the server and
connection fails.
The fix for the client is to first try to find server using "local"
names (omitting Global\ prefix) and only if server is not found,
trying global namespace.
in load_defaults()
load_defaults(), my_search_option_files() and
my_print_default_files() utilized a global variable
containing a pointer to thread local memory. This could lead
to race conditions when those functions were called with high
concurrency.
Fixed by changing the interface of the said functions to avoid
the necessity for using a global variable.
Since we cannot change load_defaults() prototype for API
compatibility reasons, it was renamed my_load_defaults().
Now load_defaults() is a thread-unsafe wrapper around
a thread-safe version, my_load_defaults().
mysys/default.c:
1. Added a thread-safe version of load_defaults(), changed
load_defaults() with the old interface to be a thread-unsafe
wrapper around the thread-safe version.
2. Always use a private MEM_ROOT in my_print_default_files,
don't use a global variable.
sql-common/client.c:
Use a thread-safe version of load_defaults().
in load_defaults()
load_defaults(), my_search_option_files() and
my_print_default_files() utilized a global variable
containing a pointer to thread local memory. This could lead
to race conditions when those functions were called with high
concurrency.
Fixed by changing the interface of the said functions to avoid
the necessity for using a global variable.
Since we cannot change load_defaults() prototype for API
compatibility reasons, it was renamed my_load_defaults().
Now load_defaults() is a thread-unsafe wrapper around
a thread-safe version, my_load_defaults().
Bug#38435 - LONG Microseconds cause MySQL to fail a CAST to DATETIME or DATE
Parsing of optional microsecond part in datetime did not
fail gracefully when field width was larger than the allowed
six places.
Now handles up to the correct six places, and disregards
any extra digits without messing up what we've already got.
mysql-test/r/type_datetime.result:
show graceful handling of overly long microsecond parts
(correct truncation).
mysql-test/t/type_datetime.test:
show graceful handling of overly long microsecond parts
(correct truncation).
sql-common/my_time.c:
Special case for time-parsing: for microsecond part,
leading zeroes are actually meaningful! Also, don't
break the entire date on more than the allowed six
digits in microsecond part, just truncate the extra
digits.
Bug#38435 - LONG Microseconds cause MySQL to fail a CAST to DATETIME or DATE
Parsing of optional microsecond part in datetime did not
fail gracefully when field width was larger than the allowed
six places.
Now handles up to the correct six places, and disregards
any extra digits without messing up what we've already got.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
There were so many changes into mtr (this is the new mtr coming) that I rather
copied mtr from 6.0-main here (at least this one knows how to run Maria tests).
I also fixed suite/maria tests to be accepted by the new mtr.
mysys/thr_mutex.c:
adding DBUG_PRINT here, so that we can locate where the warning is issued.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
