This patch adds support of RENAME INDEX operation to the ALTER TABLE
statement. Code which determines if ALTER TABLE can be done in-place
for "simple" storage engines like MyISAM, Heap and etc. was updated to
handle ALTER TABLE ... RENAME INDEX as an in-place operation. Support
for in-place ALTER TABLE ... RENAME INDEX for InnoDB was covered by
MDEV-13301.
Syntax changes
==============
A new type of <alter_specification> is added:
<rename index clause> ::= RENAME ( INDEX | KEY ) <oldname> TO <newname>
Where <oldname> and <newname> are identifiers for old name and new
name of the index.
Semantic changes
================
The result of "ALTER TABLE t1 RENAME INDEX a TO b" is a table which
contents and structure are identical to the old version of 't1' with
the only exception index 'a' being called 'b'.
Neither <oldname> nor <newname> can be "primary". The index being
renamed should exist and its new name should not be occupied
by another index on the same table.
Related to: WL#6555, MDEV-13301
When connections go to same node and deadlock happens, BF abort should
not happen for victim thread. Fixed by guarding
`wsrep_handle_SR_rollback()` so that is called only for SR transactions.
Co-authored-by: Seppo Jaakola <seppo.jaakola@iki.fi>
Co-authored-by: Daniele Sciascia <daniele.sciascia@galeracluster.com>
- Flag ALTER_STORED_COLUMN_TYPE set while doing varchar extension
for partition table. Basically all partition supports
can_be_converted_by_engine() then it should be set to
ALTER_COLUMN_TYPE_CHANGE_BY_ENGINE.
When there are E empty partitions left, auto-create N new empty
partitions for SYSTEM_TIME partitioning rotated by INTERVAL/LIMIT and
marked by AUTO_INCREMENT keyword. Syntax change: AUTO_INCREMENT
keyword (or shorter AUTO may be used instead) after LIMIT/INTERVAL
clause.
CREATE OR REPLACE TABLE t (x INT) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME LIMIT 100000 AUTO_INCREMENT;
CREATE OR REPLACE TABLE t (x INT) WITH SYSTEM VERSIONING
PARTITION BY SYSTEM_TIME INTERVAL 1 WEEK AUTO_INCREMENT;
The current revision implements hard-coded values of 1 for E and N. As
well as auto-creation threshold MinInterval = 1 hour, MinLimit = 1000.
The name for newly added partition will be first chosen as "pX", where
X is partition number and "p" is hard-coded name prefix. If this name
is already occupied, the X will be incremented until the resulting
name will be free to use.
ALTER TABLE ADD PARTITION is now always fast. If there some history
partition overflow occurs manual ALTER TABLE REBUILD PARTITION is
needed.
If async replication slave thread conflicts with cluster replication,
then the async slave transaction should be BF aborted, and depending on the
state of async slave transaction execution, potentially also replayed.
There were problems in such BF abort implementation and the replaying was not
started.
This pull request contains fixes which make sure that if async slave thread is
marked to abort and replay, it will complete carry out the rollback and
release all locks and resources before starting the replaying. After replaying,
async slave transactions is treated as successful, so the slave thread will
continue as usual, handling next replication event.
There is also new mtr test: galera.galera_slave_replay, which stresses both a
certification failure for async slave thread and a successful BF abort
followed by replaying.
* Remove those tests that will not be supported on that release.
* Make sure that correct tests are disabled and have MDEVs
* Sort test names
This should not be merged upwards.
Now there can be only one log file instead of several which
logically work as a single file.
Possible names of redo log files: ib_logfile0,
ib_logfile101 (for just created one)
innodb_log_fiels_in_group: value of this variable is not used
by InnoDB. Possible values are still 1..100, to not break upgrade
LOG_FILE_NAME: add constant of value "ib_logfile0"
LOG_FILE_NAME_PREFIX: add constant of value "ib_logfile"
get_log_file_path(): convenience function that returns full
path of a redo log file
SRV_N_LOG_FILES_MAX: removed
srv_n_log_files: we can't remove this for compatibility reasons,
but now server doesn't use this variable
log_sys_t::file::fd: now just one, not std::vector
log_sys_t::log_capacity: removed word 'group'
find_and_check_log_file(): part of logic from huge srv_start()
moved here
recv_sys_t::files: file descriptors of redo log files.
There can be several of those in case we're upgrading
from older MariaDB version.
recv_sys_t::remove_extra_log_files: whether to remove
ib_logfile{1,2,3...} after successfull upgrade.
recv_sys_t::read(): open if needed and read from one
of several log files
recv_sys_t::files_size(): open if needed and return files count
redo_file_sizes_are_correct(): check that redo log files
sizes are equal. Just to log an error for a user.
Corresponding check was moved from srv0start.cc
namespace deprecated: put all deprecated variables here to
prevent usage of it by us, developers
Do not rebuild index when it's key part converted from utf8mb3 to utf8mb4
but key part stays the same.
dict_index_add_to_cache(): assert that prefix_len is divided by mbmaxlen
ha_innobase::compare_key_parts(): compare key part lenght in symbols instead
of bytes.
btr_page_reorganize_low(): Log only the changed data in the page.
TODO: Do not copy the entire changed payload to the redo log.
Emit a combination of MEMMOVE and WRITE records to reduce the log volume.
commit 08ba388713 of MDEV-12353
introduced an incorrect assumption, which was documented by
the failing assertion.
After instant ADD COLUMN, we can have a null (and in-place) UPDATE
of NULL to NULL. No data needs to be written for such updates.
For ROW_FORMAT=REDUNDANT, we reserve space for the NULL values,
and to be compatible with existing behaviour, we will zerofill
the unused data bytes when updating to NULL value.
* Remove those tests that will not be supported on that release.
* Make sure that correct tests are disabled and have MDEVs
* Sort test names
This should not be merged upwards.
* Remove those tests that will not be supported on that release.
* Make sure that correct tests are disabled and have MDEVs
* Sort test names
This should not be merged upwards.
log_t::FORMAT_10_5: physical redo log format tag
log_phys_t: Buffered records in the physical format.
The log record bytes will follow the last data field,
making use of alignment padding that would otherwise be wasted.
If there are multiple records for the same page, also those
may be appended to an existing log_phys_t object if the memory
is available.
In the physical format, the first byte of a record identifies the
record and its length (up to 15 bytes). For longer records, the
immediately following bytes will encode the remaining length
in a variable-length encoding. Usually, a variable-length-encoded
page identifier will follow, followed by optional payload, whose
length is included in the initially encoded total record length.
When a mini-transaction is updating multiple fields in a page,
it can avoid repeating the tablespace identifier and page number
by setting the same_page flag (most significant bit) in the first
byte of the log record. The byte offset of the record will be
relative to where the previous record for that page ended.
Until MDEV-14425 introduces a separate file-level log for
redo log checkpoints and file operations, we will write the
file-level records in the page-level redo log file.
The record FILE_CHECKPOINT (which replaces MLOG_CHECKPOINT)
will be removed in MDEV-14425, and one sequential scan of the
page recovery log will suffice.
Compared to MLOG_FILE_CREATE2, FILE_CREATE will not include any flags.
If the information is needed, it can be parsed from WRITE records that
modify FSP_SPACE_FLAGS.
MLOG_ZIP_WRITE_STRING: Remove. The record was only introduced temporarily
as part of this work, before being replaced with WRITE (along with
MLOG_WRITE_STRING, MLOG_1BYTE, MLOG_nBYTES).
mtr_buf_t::empty(): Check if the buffer is empty.
mtr_t::m_n_log_recs: Remove. It suffices to check if m_log is empty.
mtr_t::m_last, mtr_t::m_last_offset: End of the latest m_log record,
for the same_page encoding.
page_recv_t::last_offset: Reflects mtr_t::m_last_offset.
Valid values for last_offset during recovery should be 0 or above 8.
(The first 8 bytes of a page are the checksum and the page number,
and neither are ever updated directly by log records.)
Internally, the special value 1 indicates that the same_page form
will not be allowed for the subsequent record.
mtr_t::page_create(): Take the block descriptor as parameter,
so that it can be compared to mtr_t::m_last. The INIT_INDEX_PAGE
record will always followed by a subtype byte, because same_page
records must be longer than 1 byte.
trx_undo_page_init(): Combine the writes in WRITE record.
trx_undo_header_create(): Write 4 bytes using a special MEMSET
record that includes 1 bytes of length and 2 bytes of payload.
flst_write_addr(): Define as a static function. Combine the writes.
flst_zero_both(): Replaces two flst_zero_addr() calls.
flst_init(): Do not inline the function.
fsp_free_seg_inode(): Zerofill the whole inode.
fsp_apply_init_file_page(): Initialize FIL_PAGE_PREV,FIL_PAGE_NEXT
to FIL_NULL when using the physical format.
btr_create(): Assert !page_has_siblings() because fsp_apply_init_file_page()
must have been invoked.
fil_ibd_create(): Do not write FILE_MODIFY after FILE_CREATE.
fil_names_dirty_and_write(): Remove the parameter mtr.
Write the records using a separate mini-transaction object,
because any FILE_ records must be at the start of a mini-transaction log.
recv_recover_page(): Add a fil_space_t* parameter.
After applying log to the a ROW_FORMAT=COMPRESSED page,
invoke buf_zip_decompress() to restore the uncompressed page.
buf_page_io_complete(): Remove the temporary hack to discard the
uncompressed page of a ROW_FORMAT=COMPRESSED page.
page_zip_write_header(): Remove. Use mtr_t::write() or
mtr_t::memset() instead, and update the compressed page frame
separately.
trx_undo_header_add_space_for_xid(): Remove.
trx_undo_seg_create(): Perform the changes that were previously
made by trx_undo_header_add_space_for_xid().
btr_reset_instant(): New function: Reset the table to MariaDB 10.2
or 10.3 format when rolling back an instant ALTER TABLE operation.
page_rec_find_owner_rec(): Merge with the only callers.
page_cur_insert_rec_low(): Combine writes by using a local buffer.
MEMMOVE data from the preceding record whenever feasible
(copying at least 3 bytes).
page_cur_insert_rec_zip(): Combine writes to page header fields.
PageBulk::insertPage(): Issue MEMMOVE records to copy a matching
part from the preceding record.
PageBulk::finishPage(): Combine the writes to the page header
and to the sparse page directory slots.
mtr_t::write(): Only log the least significant (last) bytes
of multi-byte fields that actually differ.
For updating FSP_SIZE, we must always write all 4 bytes to the
redo log, so that the fil_space_set_recv_size() logic in
recv_sys_t::parse() will work.
mtr_t::memcpy(), mtr_t::zmemcpy(): Take a pointer argument
instead of a numeric offset to the page frame. Only log the
last bytes of multi-byte fields that actually differ.
In fil_space_crypt_t::write_page0(), we must log also any
unchanged bytes, so that recovery will recognize the record
and invoke fil_crypt_parse().
Future work:
MDEV-21724 Optimize page_cur_insert_rec_low() redo logging
MDEV-21725 Optimize btr_page_reorganize_low() redo logging
MDEV-21727 Optimize redo logging for ROW_FORMAT=COMPRESSED
page_mem_alloc_free(), page_dir_set_n_heap(), page_ptr_set_direction():
Merge with the callers.
page_direction_reset(), page_direction_increment(),
page_zip_dir_insert(), page_zip_write_rec_ext(), page_zip_write_rec():
Add the parameter mtr, and write log.
PageBulk::insert(), PageBulk::finish(): Write log for all changes.
page_cur_rec_insert(), page_cur_insert_rec_write_log(),
page_cur_insert_rec_write_log(): Remove.
page_rec_set_next(), page_header_set_field(), page_header_set_ptr():
Remove. Use lower-level operations with or without logging.
page_zip_dir_add_slot(): Move to the same compilation unit with
its only caller, page_cur_insert_rec_zip().
page_cur_insert_rec_zip(): Mark pieces of code that must be skipped
once this task is completed.
btr_defragment_chunk(): Before starting a mini-transaction that
is writing (a lot), invoke log_free_check(). This should allow
the test innodb.innodb_defrag_concurrent to pass with the
mtr default_mysqld.cnf setting of innodb_log_file_size=10M.
MLOG_BUF_MARGIN: Remove.
No longer write the following redo log records:
MLOG_COMP_LIST_END_DELETE, MLOG_LIST_END_DELETE,
MLOG_COMP_LIST_START_DELETE, MLOG_LIST_START_DELETE,
MLOG_REC_DELETE,MLOG_COMP_REC_DELETE.
Each individual deleted record will be logged separately
using physical log records.
page_dir_slot_set_n_owned(),
page_zip_rec_set_owned(), page_zip_dir_delete(), page_zip_clear_rec():
Add the parameter mtr, and write redo log.
page_dir_slot_set_rec(): Remove. Replaced with lower-level operations
that write redo log when necessary.
page_rec_set_n_owned(): Replaces rec_set_n_owned_old(),
rec_set_n_owned_new().
rec_set_heap_no(): Replaces rec_set_heap_no_old(), rec_set_heap_no_new().
page_mem_free(), page_dir_split_slot(), page_dir_balance_slot():
Add the parameter mtr.
page_dir_set_n_slots(): Merge with the caller page_dir_split_slot().
page_dir_slot_set_rec(): Merge with the callers page_dir_split_slot()
and page_dir_balance_slot().
page_cur_insert_rec_low(), page_cur_insert_rec_zip():
Suppress the logging of lower-level operations.
page_cur_delete_rec_write_log(): Remove.
page_cur_delete_rec(): Do not tolerate mtr=NULL.
rec_convert_dtuple_to_rec_old(), rec_convert_dtuple_to_rec_comp():
Replace rec_set_heap_no_old() and rec_set_heap_no_new() with direct
access that does not involve redo logging.
mtr_t::memcpy(): Do allow non-redo-logged writes to uncompressed pages
of ROW_FORMAT=COMPRESSED pages.
buf_page_io_complete(): Evict the uncompressed page of
a ROW_FORMAT=COMPRESSED page after recovery. Because we no longer
write logical log records for deleting index records, but instead
write physical records that may refer directly to the compressed
page frame of a ROW_FORMAT=COMPRESSED page, and because on recovery
we will only apply the changes to the ROW_FORMAT=COMPRESSED page,
the uncompressed page frame can be stale until page_zip_decompress()
is executed.
recv_parse_or_apply_log_rec_body(): After applying MLOG_ZIP_WRITE_STRING,
ensure that the FIL_PAGE_TYPE of the uncompressed page matches the
compressed page, because buf_flush_init_for_writing() assumes that
field to be valid.
mlog_init_t::mark_ibuf_exist(): Invoke page_zip_decompress(), because
the uncompressed page after buf_page_create() is not necessarily
up to date.
buf_LRU_block_remove_hashed(): Bypass a page_zip_validate() check
during redo log apply.
recv_apply_hashed_log_recs(): Invoke mlog_init.mark_ibuf_exist()
also for the last batch, to ensure that page_zip_decompress() will
be called for freshly initialized pages.
Instead of writing the high-level redo log records
MLOG_LIST_END_COPY_CREATED, MLOG_COMP_LIST_END_COPY_CREATED
write log for each individual insert of a record.
page_copy_rec_list_end_to_created_page(): Remove.
This will improve the fill factor of some pages.
Adjust some tests accordingly.
PageBulk::init(), PageBulk::finish(): Avoid setting bogus limits
to PAGE_HEAP_TOP and PAGE_N_DIR_SLOTS. Avoid accessor functions
that would enforce these limits before the correct ones are set
at the end of PageBulk::finish().
page_zip_compress_write_log_no_data(): Remove.
We no longer write the MLOG_ZIP_PAGE_COMPRESS_NO_DATA record.
Instead, we will write MLOG_ZIP_PAGE_COMPRESS records.
compare_keys_but_name(): do not use KEY_PART_INFO::field for
Field::is_equal(). Following the logic of that code we need to
compare fields of a table. But KEY_PART_INFO::field sometimes
(when key part is shorter than table field) is a different field.
In that case Field::is_equal() returns incorrect result and
problems occur.
KEY_PART_INFO::field may become some strange field in
open_frm_error open_table_from_share(). I think this is an
incorrect logic, some tecnhical debt. I'm not fixing it right now,
because I don't have time. But I'm making Field::field_length
a const class member. Then, the only fishy code which changed that
field requires now a const_cast<>. I'm bringing attention to that
code with it. This change should not affect logic of the
program in any way.
