Adjust the configuration options, as discussed on the
maria-developers@ mailing list.
The option to hint a transaction to not be replicated in parallel is
now called @@skip_parallel_replication, consistent with
@@skip_replication.
And the --slave-parallel-mode is now simplified to have just one of
the following values:
none
minimal
conservative
optimistic
aggressive
This reflects successively harder efforts to find opportunities to run
things in parallel on the slave. It allows to extend the server with
more automatic heuristics in the future without having to introduce a
new configuration option for each and every one.
Added a SESSION-only system variable "wsrep_dirty_reads" to allow SELECT
queries to pass even when the node is not prepared to accept queries
(wsrep_ready=OFF). Added a test case.
The problem was that the maximum value of the transaction_prealloc_size
session system variable was ULONG_MAX which meant that it was possible
to cause the server to allocate excessive amounts of memory.
This patch fixes the problem by reducing the maxmimum value of
transaction_prealloc_size and transaction_alloc_block_size down
to 128K.
Note that transactions will still be able to allocate more than
128K if needed, this patch just reduces the amount that can be
preallocated - as well as the maximum size of the incremental
allocation blocks.
Added a SESSION-only system variable "wsrep_dirty_reads" to allow SELECT
queries to pass even when the node is not prepared to accept queries
(wsrep_ready=OFF). Added a test case.
log-tc-size is 24K by default. Page size is 64K on PPC64. But log-tc-size
must be at least 3 x page size. This is enforced by TC_LOG_MMAP::open()
with a comment: to guarantee non-empty pool.
This all makes server not startable in default configuration on PPC64.
Autosize log-tc-size, so that it's min value= page size * 3, default
value= page size * 6, block size= page size.
Implement --semi-sync-master-wait-point=AFTER_SYNC|AFTER_COMMIT.
When AFTER_SYNC, the semi-sync wait will be done earlier, before the storage
engine commit rather than after. This means that a transaction will not be
visible on the master until at least one slave has received it.
Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
so that a simple query with one join would not have to call my_malloc.
- Allow lower limites for query_prealloc_size for testing.
- Fixed wrong initialization of trans_alloc_block_size
innodb_stats_sample_pages
Analysis: If you set the number of analyzed pages
to very low number compared to actual pages on
that table/index it randomly pics those pages
(default 8 pages), this leads to fact that query
after analyze table returns different results. If
the index tree is small, smaller than 10 *
n_sample_pages + total_external_size, then the
estimate is ok. For bigger index trees it is
common that we do not see any borders between
key values in the few pages we pick. But still
there may be n_sample_pages different key values,
or even more. And it just tries to
approximate to n_sample_pages (8).
Fix: (1) Introduced new dynamic configuration variable
innodb_stats_sample_traditional that retains
the current design. Default false.
(2) If traditional sample is not used we use
n_sample_pages = max(min(srv_stats_sample_pages,
index->stat_index_size),
log2(index->stat_index_size)*
srv_stats_sample_pages);
(3) Introduced new dynamic configuration variable
stat_modified_counter (default = 0) if set
sets lower bound for row updates when statistics is re-estimated.
If user has provided upper bound for how many rows needs to be updated
before we calculate new statistics we use minimum of provided value
and 1/16 of table every 16th round. If no upper bound is provided
(srv_stats_modified_counter = 0, default) then calculate new statistics
if 1 / 16 of table has been modified
since the last time a statistics batch was run.
We calculate statistics at most every 16th round, since we may have
a counter table which is very small and updated very often.
@param t table
@return true if the table has changed too much and stats need to be
recalculated
*/
#define DICT_TABLE_CHANGED_TOO_MUCH(t) \
((ib_int64_t) (t)->stat_modified_counter > (srv_stats_modified_counter ? \
ut_min(srv_stats_modified_counter, (16 + (t)->stat_n_rows / 16)) : \
16 + (t)->stat_n_rows / 16))
Merge Facebook commit cd063ab930
authored by Peng Tian from https://github.com/facebook/mysql-5.6
Introduced a new configuration variable innodb_fatal_semaphore_wait_threshold,
it makes the fatal semaphore timeout configurable. Modified original commit
so that no MariaDB server files are changed, instead introduced a new
InnoDB/XtraDB configuration variable.
Its default/min/max vlaues are 600/1/2^32-1 in seconds (it was hardcoded
as 600, now its default value is 600, so the default behavior of this diff
should be no change).
setting of innodb_io_capacity_max
(a) Changed the behaviour so that if you set innodb_io_capacity to a
value > innodb_io_capacity_max that the value is accepted AND
that innodb_io_capacity_max = innodb_io_capacity * 2.
(b) If someone wants to reduce innodb_io_capacity_max and
reduce it below innodb_io_capacity then innodb_io_capacity
should be reduced to the same level as innodb_io_capacity_max.
In both cases give a warning to user.
Merge Facebook commit 154c579b828a60722a7d9477fc61868c07453d08
and e8f0052f9b112dc786bf9b957ed5b16a5749f7fd authored
by Steaphan Greene from https://github.com/facebook/mysql-5.6
Optimize prefix index queries to skip cluster index lookup when possible.
Currently InnoDB will always fetch the clustered index (primary key
index) for all prefix columns in an index, even when the value of a
particular record is smaller than the prefix length. This change
optimizes that case to use the record from the secondary index and avoid
the extra lookup.
Also adds two status vars that track how effective this is:
innodb_secondary_index_triggered_cluster_reads:
Times secondary index lookup triggered cluster lookup.
innodb_secondary_index_triggered_cluster_reads_avoided:
Times prefix optimization avoided triggering cluster lookup.
Merge Facebook commit 4f3e0343fd2ac3fc7311d0ec9739a8f668274f0d
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
Adds innodb_idle_flush_pct to enable tuning of the page flushing rate
when the system is relatively idle. We care about this, since doing
extra unnecessary flash writes shortens the lifespan of the flash.
Merged Facebook commit ecff018632c6db49bad73d9233c3cdc9f41430e9
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6
This change is to fix: http://bugs.mysql.com/62534
This makes innodb_max_dirty_pages_pct a double with min,default,max values
0.001, 75, 99.999.
This also makes innodb_max_dirty_pages_pct_lwm and adaptive_flushing_lwm
doubles, as these sysvars are inter-dependent.
Added more to the BUFFER POOL AND MEMORY section of SHOW INNODB STATUS:
Percent pages dirty: X.X
This is all n_dirty_pages / used_pages
Percent all pages dirty: X.X
This is all n_dirty_pages / all-pages
Max dirty pages percent: X.X
This is innodb_max_dirty_pages_pct
Also changed all of buf from 2 to 3 digits of precision (%.2f -> %.3f).
Added MAX_STATEMENT_TIME user variable to automaticly kill queries after a given time limit has expired.
- Added timer functions based on pthread_cond_timedwait
- Added kill_handlerton() to signal storage engines about kill/timeout
- Added support for GRANT ... MAX_STATEMENT_TIME=#
- Copy max_statement_time to current user, if stored in mysql.user
- Added status variable max_statement_time_exceeded
- Added KILL_TIMEOUT
- Removed digest hash from performance schema tests as they change all the time.
- Updated test results that changed because of the new user variables or new fields in mysql.user
This functionallity is inspired by work done by Davi Arnaut at twitter.
Test case is copied from Davi's work.
Documentation can be found at
https://kb.askmonty.org/en/how-to-limittimeout-queries/
mysql-test/r/mysqld--help.result:
Updated for new help message
mysql-test/suite/perfschema/r/all_instances.result:
Added new mutex
mysql-test/suite/sys_vars/r/max_statement_time_basic.result:
Added testing of max_statement_time
mysql-test/suite/sys_vars/t/max_statement_time_basic.test:
Added testing of max_statement_time
mysql-test/t/max_statement_time.test:
Added testing of max_statement_time
mysys/CMakeLists.txt:
Added thr_timer
mysys/my_init.c:
mysys/mysys_priv.h:
Added new mutex and condition variables
Added new mutex and condition variables
mysys/thr_timer.c:
Added timer functions based on pthread_cond_timedwait()
This can be compiled with HAVE_TIMER_CREATE to benchmark agains timer_create()/timer_settime()
sql/lex.h:
Added MAX_STATEMENT_TIME
sql/log_event.cc:
Safety fix (timeout should be threated as an interrupted query)
sql/mysqld.cc:
Added support for timers
Added status variable max_statement_time_exceeded
sql/share/errmsg-utf8.txt:
Added ER_QUERY_TIMEOUT
sql/signal_handler.cc:
Added support for KILL_TIMEOUT
sql/sql_acl.cc:
Added support for GRANT ... MAX_STATEMENT_TIME=#
Copy max_statement_time to current user
sql/sql_class.cc:
Added timer functionality to THD.
Added thd_kill_timeout()
sql/sql_class.h:
Added timer functionality to THD.
Added KILL_TIMEOUT
Added max_statement_time variable in similar manner as long_query_time was done.
sql/sql_connect.cc:
Added handling of max_statement_time_exceeded
sql/sql_parse.cc:
Added starting and stopping timers for queries.
sql/sql_show.cc:
Added max_statement_time_exceeded for user/connects status in MariaDB 10.0
sql/sql_yacc.yy:
Added support for GRANT ... MAX_STATEMENT_TIME=# syntax, to be enabled in 10.0
sql/structs.h:
Added max_statement_time user resource
sql/sys_vars.cc:
Added max_statement_time variables
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.test
Removed test as we require all fields in mysql.user table.
scripts/mysql_system_tables.sql
scripts/mysql_system_tables_data.sql
scripts/mysql_system_tables_fix.sql
Updated mysql.user with new max_statement_time field
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
* Added a basic test for wsrep_sync_wait system variable.
* Separate innodb_load_xa tests for wsrep and non-wsrep builds.
* Updated file_contents.test with correct file location
* Some coding style related changes.
mysqldump:
- Added --log-queries to allow one to disable logging for the dump
sql/log_event.cc:
- Removed setting of enable_slow_log as it's not required anymore.
sql/sql_parse.cc:
- Set enable_slow_log to value of thd->variables.sql_log_slow as this will speed up tests if slow log is disabled.
- opt_log_slow_admin_statements can now only disable slow log, not enable it.
sql/sql_explain.cc:
- Minor cleanup
Other things:
- Added sql_log_slow to system variables.
- Changed opt_slow_log to global_system_variables.sql_log_slow in all files
- Updated tests to reflect changes
A donor node does a flush tables and then tries to
freeze innodb writes before proceeding with SST.
However, innodb_disallow_writes was missing in xtradb.
Merged 'InnodbFreeze' patch from maria-5.5-galera's to
xtradb. Also, merged some changes missing in innobase's
os0file.cc.
Added a basic test case for innodb_disallow_writes system
variable.
