The immediate bug was caused by a failure to recognize a correct
position to stop the slave applier run in optimistic parallel mode.
There were the following set of issues that the analysis unveil.
1 incorrect estimate for the event binlog position passed to
is_until_satisfied
2 wait for workers to complete by the driver thread did not account non-group events
that could be left unprocessed and thus to mix up the last executed
binlog group's file and position:
the file remained old and the position related to the new rotated file
3 incorrect 'slave reached file:pos' by the parallel slave report in the error log
4 relay log UNTIL missed out the parallel slave branch in
is_until_satisfied.
The patch addresses all of them to simplify logics of log change
notification in either the master and relay-log until case.
P.1 is addressed with passing the event into is_until_satisfied()
for proper analisis by the function.
P.2 is fixed by changes in handle_queued_pos_update().
P.4 required removing relay-log change notification by workers.
Instead the driver thread updates the notion of the current relay-log
fully itself with aid of introduced
bool Relay_log_info::until_relay_log_names_defer.
An extra print out of the requested until file:pos is arranged
with --log-warning=3.
Analysis:
========
RESET MASTER TO # command deletes all binary log files listed in the index
file, resets the binary log index file to be empty, and creates a new binary
log with number #. When the user provided binary log number is greater than
the max allowed value '2147483647' server fails to generate a new binary log.
The RESET MASTER statement marks the binlog closure status as
'LOG_CLOSE_TO_BE_OPENED' and exits. Statements which follow RESET MASTER
try to write to binary log they find the log_state != LOG_CLOSED and
proceed to write to binary log cache and it results in crash.
Fix:
===
During MYSQL_BIN_LOG open, if generation of new binary log name fails then the
"log_state" needs to be marked as "LOG_CLOSED". With this further statements
will find binary log as closed and they will skip writing to the binary log.
This is a new test from upstream that did not expect the correct value
of the command slot of the Dump thread when the latter gets killed.
The test is made to expect "Killed" string as the command
in show-processlist as it is supposed to when a thread gets killed.
If the InnoDB buffer pool contains many pages for a table or index
that is being dropped or rebuilt, and if many of such pages are
pointed to by the adaptive hash index, dropping the adaptive hash index
may consume a lot of time.
The time-consuming operation of dropping the adaptive hash index entries
is being executed while the InnoDB data dictionary cache dict_sys is
exclusively locked.
It is not actually necessary to drop all adaptive hash index entries
at the time a table or index is being dropped or rebuilt. We can let
the LRU replacement policy of the buffer pool take care of this gradually.
For this to work, we must detach the dict_table_t and dict_index_t
objects from the main dict_sys cache, and once the last
adaptive hash index entry for the detached table is removed
(when the garbage page is evicted from the buffer pool) we can free
the dict_table_t and dict_index_t object.
Related to this, in MDEV-16283, we made ALTER TABLE...DISCARD TABLESPACE
skip both the buffer pool eviction and the drop of the adaptive hash index.
We shifted the burden to ALTER TABLE...IMPORT TABLESPACE or DROP TABLE.
We can remove the eviction from DROP TABLE. We must retain the eviction
in the ALTER TABLE...IMPORT TABLESPACE code path, so that in case the
discarded table is being re-imported with the same tablespace identifier,
the fresh data from the imported tablespace will replace any stale pages
in the buffer pool.
rpl.rpl_failed_drop_tbl_binlog: Remove the test. DROP TABLE can
no longer be interrupted inside InnoDB.
fseg_free_page(), fseg_free_step(), fseg_free_step_not_header(),
fseg_free_page_low(), fseg_free_extent(): Remove the parameter
that specifies whether the adaptive hash index should be dropped.
btr_search_lazy_free(): Lazily free an index when the last
reference to it is dropped from the adaptive hash index.
buf_pool_clear_hash_index(): Declare static, and move to the
same compilation unit with the bulk of the adaptive hash index
code.
dict_index_t::clone(), dict_index_t::clone_if_needed():
Clone an index that is being rebuilt while adaptive hash index
entries exist. The original index will be inserted into
dict_table_t::freed_indexes and dict_index_t::set_freed()
will be called.
dict_index_t::set_freed(), dict_index_t::freed(): Note that
or check whether the index has been freed. We will use the
impossible page number 1 to denote this condition.
dict_index_t::n_ahi_pages(): Replaces btr_search_info_get_ref_count().
dict_index_t::detach_columns(): Move the assignment n_fields=0
to ha_innobase_inplace_ctx::clear_added_indexes().
We must have access to the columns when freeing the
adaptive hash index. Note: dict_table_t::v_cols[] will remain
valid. If virtual columns are dropped or added, the table
definition will be reloaded in ha_innobase::commit_inplace_alter_table().
buf_page_mtr_lock(): Drop a stale adaptive hash index if needed.
We will also reduce the number of btr_get_search_latch() calls
and enclose some more code inside #ifdef BTR_CUR_HASH_ADAPT
in order to benefit cmake -DWITH_INNODB_AHI=OFF.
Also fixes:
MDEV-21487: Implement option for mysql_upgrade that allows root@localhost to be replaced
MDEV-21486: Implement option for mysql_install_db that allows root@localhost to be replaced
Add user mariadb.sys to be definer of user view
(and has right on underlying table global_priv for
required operation over global_priv
(SELECT,UPDATE,DELETE))
Also changed definer of gis functions in case of creation,
but they work with any definer so upgrade script do not try
to push this change.
in fact, in MariaDB it cannot, but it can show spurious slaves
in SHOW SLAVE HOSTS.
slave was registered in COM_REGISTER_SLAVE and un-registered after
COM_BINLOG_DUMP. If there was no COM_BINLOG_DUMP, it would never
unregister.
Problem:
=======
SET @@GLOBAL.replicate_wild_ignore_table='';
SET @@GLOBAL.replicate_wild_do_table='';
Reports following valgrind error.
Conditional jump or move depends on uninitialised value(s)
Rpl_filter::set_wild_ignore_table(char const*) (rpl_filter.cc:439)
Conditional jump or move depends on uninitialised value(s)
at 0xF60390: delete_dynamic (array.c:304)
by 0x74F3F2: Rpl_filter::set_wild_do_table(char const*) (rpl_filter.cc:421)
Analysis:
========
List of values provided for options "wild_do_table" and "wild_ignore_table" are
stored in DYNAMIC_ARRAYS. When an empty list is provided these dynamic arrays
are not initialized. Existing code treats empty element list as an error and
tries to clean the uninitialized list. This results in above valgrind issue.
Fix:
===
The clean up should be initiated only when there is an error while parsing the
'wild_do_table' or 'wild_ignore_table' list and the dynamic_array is in
initialized state. Otherwise for empty list it should simply return success.
In main.index_merge_myisam we remove the test that was added in
commit a2d24def8c because
it duplicates the test case that was added in
commit 5af12e4635.
Changed wording in error messages from MySQL to MariaDB. In
cases where the word server could be used instead it was done.
Tests that have these errors recorded were updated.
The cause was an uninitalized variable on the slave when reading a dummy
event that can only be generated by the test.
Fixed by ensuring that flag2 is always initialized.
Fixed also some indentation issues and improved comments.
MDEV-21605 Clean up and speed up interfaces for binary row logging
MDEV-21617 Bug fix for previous version of this code
The intention is to have as few 'if' as possible in ha_write() and
related functions. This is done by pre-calculating once per statement the
row_logging state for all tables.
Benefits are simpler and faster code both when binary logging is disabled
and when it's enabled.
Changes:
- Added handler->row_logging to make it easy to check it table should be
row logged. This also made it easier to disabling row logging for system,
internal and temporary tables.
- The tables row_logging capabilities are checked once per "statements
that updates tables" in THD::binlog_prepare_for_row_logging() which
is called when needed from THD::decide_logging_format().
- Removed most usage of tmp_disable_binlog(), reenable_binlog() and
temporary saving and setting of thd->variables.option_bits.
- Moved checks that can't change during a statement from
check_table_binlog_row_based() to check_table_binlog_row_based_internal()
- Removed flag row_already_logged (used by sequence engine)
- Moved binlog_log_row() to a handler::
- Moved write_locked_table_maps() to THD::binlog_write_table_maps() as
most other related binlog functions are in THD.
- Removed binlog_write_table_map() and binlog_log_row_internal() as
they are now obsolete as 'has_transactions()' is pre-calculated in
prepare_for_row_logging().
- Remove 'is_transactional' argument from binlog_write_table_map() as this
can now be read from handler.
- Changed order of 'if's in handler::external_lock() and wsrep_mysqld.h
to first evaluate fast and likely cases before more complex ones.
- Added error checking in ha_write_row() and related functions if
binlog_log_row() failed.
- Don't clear check_table_binlog_row_based_result in
clear_cached_table_binlog_row_based_flag() as it's not needed.
- THD::clear_binlog_table_maps() has been replaced with
THD::reset_binlog_for_next_statement()
- Added 'MYSQL_OPEN_IGNORE_LOGGING_FORMAT' flag to open_and_lock_tables()
to avoid calculating of binary log format for internal opens. This flag
is also used to avoid reading statistics tables for internal tables.
- Added OPTION_BINLOG_LOG_OFF as a simple way to turn of binlog temporary
for create (instead of using THD::sql_log_bin_off.
- Removed flag THD::sql_log_bin_off (not needed anymore)
- Speed up THD::decide_logging_format() by remembering if blackhole engine
is used and avoid a loop over all tables if it's not used
(the common case).
- THD::decide_logging_format() is not called anymore if no tables are used
for the statement. This will speed up pure stored procedure code with
about 5%+ according to some simple tests.
- We now get annotated events on slave if a CREATE ... SELECT statement
is transformed on the slave from statement to row logging.
- In the original code, the master could come into a state where row
logging is enforced for all future events if statement could be used.
This is now partly fixed.
Other changes:
- Ensure that all tables used by a statement has query_id set.
- Had to restore the row_logging flag for not used tables in
THD::binlog_write_table_maps (not normal scenario)
- Removed injector::transaction::use_table(server_id_type sid, table tbl)
as it's not used.
- Cleaned up set_slave_thread_options()
- Some more DBUG_ENTER/DBUG_RETURN, code comments and minor indentation
changes.
- Ensure we only call THD::decide_logging_format_low() once in
mysql_insert() (inefficiency).
- Don't annotate INSERT DELAYED
- Removed zeroing pos_in_table_list in THD::open_temporary_table() as it's
already 0
MDEV-19964 S3 replication support
Added new configure options:
s3_slave_ignore_updates
"If the slave has shares same S3 storage as the master"
s3_replicate_alter_as_create_select
"When converting S3 table to local table, log all rows in binary log"
This allows on to configure slaves to have the S3 storage shared or
independent from the master.
Other thing:
Added new session variable '@@sql_if_exists' to force IF_EXIST to DDL's.
e.g.
- dont -> don't
- occurence -> occurrence
- succesfully -> successfully
- easyly -> easily
Also remove trailing space in selected files.
These changes span:
- server core
- Connect and Innobase storage engine code
- OQgraph, Sphinx and TokuDB storage engines
Related to MDEV-21769.
