Forcing wait on nodes 2 and 3, to turn wsrep_ready to 'ON' before querying wsrep status variables.
This guarantees that status reads don't come too early on these nodes
Support for galera GTID consistency thru cluster. All nodes in cluster
should have same GTID for replicated events which are originating from cluster.
Cluster originating commands need to contain sequential WSREP GTID seqno
Ignore manual setting of gtid_seq_no=X.
In master-slave scenario where master is non galera node replicated GTID is
replicated and is preserved in all nodes.
To have this - domain_id, server_id and seqnos should be same on all nodes.
Node which bootstraps the cluster, to achieve this, sends domain_id and
server_id to other nodes and this combination is used to write GTID for events
that are replicated inside cluster.
Cluster nodes that are executing non replicated events are going to have different
GTID than replicated ones, difference will be visible in domain part of gtid.
With wsrep_gtid_domain_id you can set domain_id for WSREP cluster.
Functions WSREP_LAST_WRITTEN_GTID, WSREP_LAST_SEEN_GTID and
WSREP_SYNC_WAIT_UPTO_GTID now works with "native" GTID format.
Fixed galera tests to reflect this chances.
Add variable to manually update WSREP GTID seqno in cluster
Add variable to manipulate and change WSREP GTID seqno. Next command
originating from cluster and on same thread will have set seqno and
cluster should change their internal counter to it's value.
Behavior is same as using @@gtid_seq_no for non WSREP transaction.
* Collect and pass apply error data to provider
* Rollback failed transaction and continue operation if provider returns
SUCCESS
* MTR tests for inconsistency voting
Currently, running mtr with an incorrect (for example, new or
obsolete) version of wsrep_provider (for example, with the 26
version of libgalera_smm.so) leads to the failure of tests in
several suites with vague error diagnostics.
As for the galera_3nodes suite, the mtr also does not effectively
check all the prerequisites after merge with MDEV-18426 fixes.
For example, tests that using mariabackup do not check for presence
of ss and socat/nc. This is due to improper handling of relative
paths in mtr scripts.
In addition, some tests in different suites can be run without
setting the environment variables such as MTR_GALERA_TFMT, XBSTREAM,
and so on.
To eliminate all these issues, this patch makes the following changes:
1. Added auxiliary wsrep_mtr_check utility (which located in the
mysql-test/lib/My/SafeProcess subdirectory), which compares the
versions of the wsrep API that used by the server and by the wsrep
provider library, and it does this comparison safely, without
accessing the API if the versions do not match.
2. All checks related to the presence of mariabackup and utilities
that necessary for its operation transferred from the local directories
of different mtr suites (from the suite.pm files) to the main suite.pm
file. This not only reduces the amount of code and eliminates duplication
of identical code fragments, but also avoids problems due to the inability
of mtr to consider relative paths to include files when checking skip
combinations.
3. Setting the values of auxiliary environment variables that
are necessary for Galera, SST scripts and mariabackup (to work
properly) is moved to the main mysql-test-run.pl script, so as
not to duplicate this code in different suites, and to avoid
partial corrections of the same errors for different suites
(while other suites remain uncorrected).
4. Fixed duplication of the have_file_key_management.inc and
have_filekeymanagement.inc files between different suites,
these checks are also transferred to the top level.
5. Added garbd presence check and garbd path variable.
https://jira.mariadb.org/browse/MDEV-18565
* MDEV-18565: Galera mtr-suite fails if galera library is not installed
Currently, running mtr with an incorrect (for example, new or
obsolete) version of wsrep_provider (for example, with the 26
version of libgalera_smm.so) leads to the failure of tests in
several suites with vague error diagnostics.
As for the galera_3nodes suite, the mtr also does not effectively
check all the prerequisites after merge with MDEV-18426 fixes.
For example, tests that using mariabackup do not check for presence
of ss and socat/nc. This is due to improper handling of relative
paths in mtr scripts.
In addition, some tests in different suites can be run without
setting the environment variables such as MTR_GALERA_TFMT, XBSTREAM,
and so on.
To eliminate all these issues, this patch makes the following changes:
1. Added auxiliary wsrep_mtr_check utility (which located in the
mysql-test/lib/My/SafeProcess subdirectory), which compares the
versions of the wsrep API that used by the server and by the wsrep
provider library, and it does this comparison safely, without
accessing the API if the versions do not match.
2. All checks related to the presence of mariabackup and utilities
that necessary for its operation transferred from the local directories
of different mtr suites (from the suite.pm files) to the main suite.pm
file. This not only reduces the amount of code and eliminates duplication
of identical code fragments, but also avoids problems due to the inability
of mtr to consider relative paths to include files when checking skip
combinations.
3. Setting the values of auxiliary environment variables that
are necessary for Galera, SST scripts and mariabackup (to work
properly) is moved to the main mysql-test-run.pl script, so as
not to duplicate this code in different suites, and to avoid
partial corrections of the same errors for different suites
(while other suites remain uncorrected).
4. Fixed duplication of the have_file_key_management.inc and
have_filekeymanagement.inc files between different suites,
these checks are also transferred to the top level.
https://jira.mariadb.org/browse/MDEV-18565
* Build without additional utility in configurations without wsrep support
This patch contains a fix for the MDEV-17262/17243 issues and
new mtr test.
These issues (MDEV-17262/17243) have two reasons:
1) After an intermediate commit, a transaction loses its status
of "transaction that registered in the MySQL for 2pc coordinator"
(in the InnoDB) due to the fact that since version 10.2 the
write_row() function (which located in the ha_innodb.cc) does
not call trx_register_for_2pc(m_prebuilt->trx) during the processing
of split transactions. It is necessary to restore this call inside
the write_row() when an intermediate commit was made (for a split
transaction).
Similarly, we need to set the flag of the started transaction
(m_prebuilt->sql_stat_start) after intermediate commit.
The table->file->extra(HA_EXTRA_FAKE_START_STMT) called from the
wsrep_load_data_split() function (which located in sql_load.cc)
will also do this, but it will be too late. As a result, the call
to the wsrep_append_keys() function from the InnoDB engine may be
lost or function may be called with invalid transaction identifier.
2) If a transaction with the LOAD DATA statement is divided into
logical mini-transactions (of the 10K rows) and binlog is rotated,
then in rare cases due to the wsrep handler re-registration at the
boundary of the split, the last portion of data may be lost. Since
splitting of the LOAD DATA into mini-transactions is technical,
I believe that we should not allow these mini-transactions to fall
into separate binlogs. Therefore, it is necessary to prohibit the
rotation of binlog in the middle of processing LOAD DATA statement.
https://jira.mariadb.org/browse/MDEV-17262 and
https://jira.mariadb.org/browse/MDEV-17243
Timeout values in galera_2x3nodes.cnf made cluster startup
unreliable. Tweaked timeout values for more reliable cluster start.
Fixed restart_parameters in galera_sr_mysqldump_sst.
Temporary disable WSREP while executing RESET MASTER. In situation when 2 nodes are both master/slave first stop slave on both and than reset master.
Enforce stricter causality check with wsrep_sync_wait.
Most of the mtr tests in the galera_3nodes suite fail
for a variety of reasons with a variety of errors.
This patch fixes several substantial flaws
in the galera_3nodes suite tests and in the mtr framework
service files, adapting the tests from galera_3nodes
for the current version of MariaDB.
This patch also synchronizes some galera_3nodes-related
files with the latest changes made for MDEV-17835 (v2 patch)
and for MDEV-18379 in other branches (10.2 and 10.3).
Closes#1161
Most of the mtr tests in the galera_3nodes suite fail
for a variety of reasons with a variety of errors.
Some tests simply need to add the missing "connection"
lines to the result files, but many of them fail due
to substantial errors that require reworking test files.
This patch adds the missing "connection" lines to
the result files and fixes several substantial flaws
in the galera_3nodes suite tests and in the mtr framework
service files, adapting the tests from galera_3nodes
for the current version of MariaDB.
https://jira.mariadb.org/browse/MDEV-18426
This patch contains the port of the MDEV-18379 patch
for 10.2 branch, but also includes a number of changes
made within MDEV-17835, which are necessary for the
normal operation of tests that use IPv6:
1) Currently, the three-node mtr suite for Galera (galera_3nodes)
uses a separate IPv6 availability check using the "have_ipv6.inc"
file. This check duplicates a more accurate check at suite.pm
level, which can be used by including the file "check_ipv6.inc".
This patch removes this discrepancy between suites.
2) Fixed numerous bugs in the SST scripts and in the mtr test
files (galera_3nodes mtr suite) that prevented the use of Galera
with IPv6 addresses.
3) Fixed flaws in the galera_3nodes mtr suite control scripts,
because of which they could not work with mariabackup.
4) Fixed flaws in the rsync and mysqldump tests (for galera_3nodes
mtr tests suite). These tests were not performed successfully
without these fixes.
5) GAL-501 test in the galera_3nodes suite does not contain the
option "--bind-address=::" that is needed for the test to work
correctly with IPv6 (at least on some systems), since without
it the server will not wait for connections on the IPv6
interface.
https://jira.mariadb.org/browse/MDEV-18379
and partially https://jira.mariadb.org/browse/MDEV-17835
Most of the mtr tests in the galera_3nodes suite fail
for a variety of reasons with a variety of errors.
Some tests simply need to add the missing "connection"
lines to the result files, but many of them fail due
to substantial errors that require reworking test files.
This patch adds the missing "connection" lines to
the result files and fixes several substantial flaws
in the galera_3nodes suite tests and in the mtr framework
service files, adapting the tests from galera_3nodes
for the current version of MariaDB.
https://jira.mariadb.org/browse/MDEV-18426
This patch contains the port of the MDEV-18379 patch
for 10.1 branch, but also includes a number of changes
made within MDEV-17835, which are necessary for the
normal operation of tests that use IPv6:
1) Fixed flaws in the galera_3nodes mtr suite control scripts,
because of which they could not work with mariabackup.
2) Fixed numerous bugs in the SST scripts and in the mtr test
files (galera_3nodes mtr suite) that prevented the use of Galera
with IPv6 addresses.
3) Fixed flaws in tests for rsync and mysqldump (for galera_3nodes
mtr tests suite). These tests were not performed successfully
without these fixes.
4) Currently, the three-node mtr suite for Galera (galera_3nodes)
uses a separate IPv6 availability check using the "have_ipv6.inc"
file. This check duplicates a more accurate check at suite.pm
level, which can be used by including the file "check_ipv6.inc".
This patch removes this discrepancy between suites.
5) GAL-501 test in the galera_3nodes suite does not contain the
option "--bind-address=::" which is needed for the test to work
correctly with IPv6 (at least on some systems), since without
it the server will not wait for connections on the IPv6 interface.
https://jira.mariadb.org/browse/MDEV-18379
and partially https://jira.mariadb.org/browse/MDEV-17835
Currently, the three-node mtr suite for Galera (galera_3nodes)
uses a separate IPv6 availability check using the "have_ipv6.inc"
file. This check duplicates a more accurate check at suite.pm
level, which can be used by including the file "check_ipv6.inc".
This patch removes this discrepancy between suites. In addition,
one of the files in the galera_3nodes suite does not contain the
option "--bind-address=::" which is needed for the test to work
correctly with IPv6 (at least on some systems), since without
it the server will not wait for connections on the IPv6 interface.
https://jira.mariadb.org/browse/MDEV-18379
* Made galera_3nodes.galera_ipv6_mariabackup deterministic with respect
to donor selection, fixed assert grep definitions to match
Galera 4 behavior and recorded.
* Removed extra connection setup from galera_3nodes.galera_ipv6_mysqldump
and recorded.
The second line of changes related to replacing xtrabackup with
mariabackup:
1) All unnecessary references to xtrabackup are removed from
the documentation, from some comments, from the control files
that are used to prepare the packages.
2) Made corrections of the tests from the galera_3nodes suite
that mentioned xtrabackup or the old (associated with xtrabackup)
version of innobackupex.
3) Fixed flaws in the galera_3nodes mtr suite control scripts,
because of which they could not work with mariabackup.
4) Fixed numerous bugs in the SST scripts and in the mtr test
files (galera_3nodes mtr suite) that prevented the use of Galera
with IPv6 addresses.
5) Fixed flaws in tests for rsync and mysqldump (for galera_3nodes
mtr tests suite). These tests were not performed successfully without
these fixes.
https://jira.mariadb.org/browse/MDEV-17835
