it used current_thd->alloc() and allocated on the thd's execution arena,
not on table->expr_arena.
Remove THD::arena_for_cached_items that is temporarily set in
update_virtual_fields(), and replaces THD arena in get_datetime_value().
Instead set THD arena to table->expr_arena for the whole duration
of update_virtual_fields()
When a deadlock kill is detected inside the storage engine, the kill
is not done immediately, to avoid calling back into the storage engine
kill_query method with various lock subsystem mutexes held. Instead the
kill is queued and done later by a slave background thread.
This patch in preparation for fixing TokuDB optimistic parallel
replication, as well as for removing locking hacks in InnoDB/XtraDB in
10.2.
Signed-off-by: Kristian Nielsen <knielsen at knielsen-hq.org>
In galera cluster, the definer (and thus binlog invoker) must be set
for CREATE ROLE before Query_log_event is created during TOI on the
originating node.
If a conflict happens under wsrep_on, the THD's wsrep_conflict_state
is typically set to MUST_ABORT and cleared later, when transaction is
aborted. However, when wsrep_on is disabled, no check is performed to
see whether wsrep_conflict_state is set. So this potentially creates
spurious deadlock errors on the subsequent statement that runs with
wsrep_on enabled.
To avoid this problem wsrep_thd_set_conflict_state() sets the conflict
state only if wsrep_on is enabled.
- reverted from tracking donor servicing thread. With xtrabackup SST,
xtrabackup thread will call FTWRL and node is desynced upfront
- Skipping desync in FTWRL if node is operating as donor
- enveloped FTWRL processing with wsrep desync/resync calls. This way FTWRL processing node
will not cause flow control to kick in
- donor servicing thread is unfortunate exception, we must let him to pause provider as part
of FTWRL phase, but not desync/resync as this is done as part of donor control on higher
level
(like DROP TABLE) has been scheduled before conflicting DDL's (like INSERT)
are commited.
What makes these bugs hard to detect is that in most cases any wrong
schduling are caught by MDL locks. It's only when there are timing issues
that the bugs (usually deadlocks) are noticed.
This patch adds a DBUG_ASSERT() that detects, in parallel replication,
if a DDL is scheduled before any depending DML'S are commited.
It does this be checking if there are any conflicting replication locks
when the DDL is about to wait for getting it's MDL lock.
I also did some minor code cleanups in sql_base.cc to make this code
similar to other related code.
Problem was that notify_shared_lock() didn't abort an insert delayed thread
if it was in thr_upgrade_write_delay_lock().
ALTER TABLE first takes a weak_mdl_lock, then a thr_lock and then tries to upgrade
the mdl_lock.
Delayed insert thread first takes a mdl lock followed by a
thr_upgrade_write_delay_lock()
This caused insert delay to wait for alter table in thr_lock, while
alter table was waiting for the mdl lock by insert delay.
Fixed by telling mdl to run thr_lock_abort() for the insert delay thread table.
We also set thd->mysys_var->abort to 1 for the delay thread when it's killed
by alter table to ensure it doesn't ever get locked in thr_lock.
- Fixes query cache so that it is aware of wsrep_sync_wait.
Query cache would return (possibly stale) results to the
client, regardless of the value of wsrep_sync_wait.
- Includes the test case that reproduced the issue.
- Moves call wsrep_free_status() to THD::cleanup_after_query().
Wsrep status variables were previously freed only on SHOW STATUS.
- Removes valgrind suppression from mysql-test/valgrind.
- Added testing if connection is killed to shortcut reading of connection data
This will allow us later in 10.2 to do a cleaner shutdown of slaves (less errors in the log)
- Add new status variables: Slaves_connected, Slaves_running and Slave_connections.
- Use MYSQL_SLAVE_NOT_RUN instead of 0 with slave_running.
- Don't print obvious extra warnings to the error log when slave is shut down normally.
On shutdown feedback was sending a short report without creating
a THD. At that point current_thd was pointing to the already
destroyed THD from the previous full report.
backport from 10.1:
commit bfe703a
Author: Sergei Golubchik <serg@mariadb.org>
Date: Tue Feb 3 18:19:56 2015 +0100
don't let current_thd to point to a destroyed THD
As galera node (slave) received query log events from an async
replication master, it partially wrote the updates made to replication
state table (mysql.gtid_slave_pos) to galera transaction writeset post
TOI. As a result, the transaction handle, thus created within galera,
was never freed/purged as the corresponding trx did not commit.
Thus, it kept piling up for every query log event and was only reclaimed
upon server shutdown when the transaction map object got destructed.
Fixed by making sure that updates in replication slave state table
are not written to galera transaction writeset and thus, not replicated
to other nodes.
Problem:
At the end of first execution select_lex->prep_where is pointing to
a runtime created object (temporary table field). As a result
server exits trying to access a invalid pointer during second
execution.
Analysis:
While optimizing the join conditions for the query, after the
permanent transformation, optimizer makes a copy of the new
where conditions in select_lex->prep_where. "prep_where" is what
is used as the "where condition" for the query at the start of execution.
W.r.t the query in question, "where" condition is actually pointing
to a field in the temporary table. As a result, for the second
execution the pointer is no more valid resulting in server exit.
Fix:
At the end of the first execution, select_lex->where will have the
original item of the where condition.
Make prep_where the new place where the original item of select->where
has to be rolled back.
Fixed in 5.7 with the wl#7082 - Move permanent transformations from
JOIN::optimize to JOIN::prepare
Patch for 5.5 includes the following backports from 5.6:
Bugfix for Bug12603141 - This makes the first execute statement in the testcase
pass in 5.5
However it was noted later in in Bug16163596 that the above bugfix needed to
be modified. Although Bug16163596 is reproducible only with changes done for
Bug12582849, we have decided include the fix.
Considering that Bug12582849 is related to Bug12603141, the fix is
also included here. However this results in Bug16317817, Bug16317685,
Bug16739050. So fix for the above three bugs is also part of this patch.
Problem & Analysis: If DML invokes a trigger or a
stored function that inserts into an AUTO_INCREMENT column,
that DML has to be marked as 'unsafe' statement. If the
tables are locked in the transaction prior to DML statement
(using LOCK TABLES), then the same statement is not marked as
'unsafe' statement. The logic of checking whether unsafeness
is protected with if (!thd->locked_tables_mode). Hence if
we lock the tables prior to DML statement, it is *not* entering
into this if condition. Hence the statement is not marked
as unsafe statement.
Fix: Irrespective of locked_tables_mode value, the unsafeness
check should be done. Now with this patch, the code is moved
out to 'decide_logging_format()' function where all these checks
are happening and also with out 'if(!thd->locked_tables_mode)'.
Along with the specified test case in the bug scenario
(BINLOG_STMT_UNSAFE_AUTOINC_COLUMNS), we also identified that
other cases BINLOG_STMT_UNSAFE_AUTOINC_NOT_FIRST,
BINLOG_STMT_UNSAFE_WRITE_AUTOINC_SELECT, BINLOG_STMT_UNSAFE_INSERT_TWO_KEYS
are also protected with thd->locked_tables_mode which is not right. All
of those checks also moved to 'decide_logging_format()' function.
changes in query execution plans.
Fixed by introducing table->rpl_write_set which holds which columns should
be stored in the binary log.
Other things:
- Removed some not needed references to read_set and write_set to make
code really changing read_set and write_set easier to read
(in opt_range.cc)
- Added error handling of failed unpack_current_row()
- Added missing call to mark_columns_needed_for_insert() for DELAYED INSERT
- Removed not used functions in_read_set() and in_write_set()
- In rpl_record.cc, removed not used variable error
