This fixed failing test in group_by.test
mysql-test/r/join_outer.result:
Updated test case
mysql-test/r/join_outer_jcl6.result:
Updated test case
sql/item.cc:
Don't reset maybe_null in update_used_tables(); This breaks ROLLUP
sql/item.h:
Don't reset maybe_null in update_used_tables(); This breaks ROLLUP
sql/item_cmpfunc.h:
Don't reset maybe_null in update_used_tables(); This breaks ROLLUP
The problem was that maybe_null of Item_row and its componetes was unsynced after update_used_tables() (and so pushed_cond_guards was not initialized but then requested).
Fix updates Item_row::maybe_null on update_used_tables().
Analysis
The reason for the less efficient plan was result of a prior design decision -
to limit the eveluation of constant expressions during optimization to only
non-expensive ones. With this approach all stored procedures were considered
expensive, and were not evaluated during optimization. As a result, SPs didn't
participate in range optimization, which resulted in a plan with table scan
rather than index range scan.
Solution
Instead of considering all SPs expensive, consider expensive only those SPs
that are non-deterministic. If an SP is deterministic, the optimizer will
checj if it is constant, and may eventually evaluate it during optimization.
The original patch with the implementation of virtual columns
did not support INSERT DELAYED into tables with virtual columns.
This patch fixes the problem.
(because it's conceptually wrong. only the user can decide whether the kill is
allowed to leave tables in the inconsistent state, storage engine has no say in that)
The previous fix for MDEV-3992 was incomplete, because it still computed
incorrectly the number of keyparts of the extended secondary key in the
case when columns of the PK participate in the secondary key.
This patch by Monty corrects the above problem.
Analysis:
The crash is a result of incorrect analysis of whether a secondary key
can be extended with a primary in order to compute ORDER BY. The analysis
is done in test_if_order_by_key(). This function doesn't take into account
that the primary key may in fact index the same columns as the secondary
key. For the test query test_if_order_by_key says that there is an extended
key with total 2 keyparts.
At the same time, the condition
if (pkinfo->key_part[i].field->key_start.is_set(nr))
in test_if_cheaper_oredring() becomes true for (i == 0), which results in
an invalid access to rec_per_key[-1].
Solution:
The best solution would be to reuse KEY::ext_key_parts that is already computed
by open_binary_frm(), however after detailed analysis the conclusion is that
the change would be too intrusive for a GA release.
The solution for 5.5 is to add a guard for the case when the 0-th key part is
considered, and to assume that all keys will be scanned in this case.
The bug could cause a crash when several connections needed
persistent statistics for the same table.
Also added a missing call of set_statistics_for_table() in the code
of the function mysql_update.
The bug could lead to a wrong estimate of the number of expected rows
in the output of the EXPLAIN commands for queries with GROUP BY.
This could be observed in the test case for LP bug 934348.
- Added --verbose to BUILD scripts to get make to write out compile commands.
- Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 was used with build scripts.
- Don't write warnings about replication variables when doing bootstrap.
- Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
- Ignore some compiler warnings
BUILD/FINISH.sh:
Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 or --verbose was used
BUILD/SETUP.sh:
Added --verbose to print out the full compile lines
Updated help message
client/mysqltest.cc:
Fixed that one can use 'replace' with cat_file
cmake/configure.pl:
If --verbose is used, get make to write out compile commands
debian/dist/Debian/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
debian/dist/Ubuntu/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
include/my_pthread.h:
Made set_timespec_time_nsec() more portable.
include/mysql/psi/mysql_thread.h:
Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
mysql-test/suite/innodb/r/auto_increment_dup.result:
Fixed wrong DBUG_SYNC
mysql-test/suite/innodb/t/auto_increment_dup.test:
Fixed wrong DBUG_SYNC
mysql-test/suite/perfschema/include/upgrade_check.inc:
Make test more portable for changes in *.sql files
mysql-test/suite/perfschema/r/pfs_upgrade.result:
Updated test results
mysql-test/valgrind.supp:
Ignore running Aria checkpoint thread
scripts/mysqlaccess.sh:
Changed reference of bugs database
Ensure that also client-server group is read.
sql/handler.cc:
Added missing syncpoint
sql/mysqld.cc:
Don't write warnings about replication variables when doing bootstrap
sql/mysqld.h:
Don't write warnings about replication variables when doing bootstrap
sql/rpl_rli.cc:
Don't write warnings about replication variables when doing bootstrap
sql/sql_insert.cc:
Don't mask SERVER_SHUTDOWN in insert_delayed
This is done to be able to distingush between shutdown and interrupt errors
support-files/compiler_warnings.supp:
Ignore some compiler warnings in xtradb,innobase, oqgraph, yassl, string3.h
Fixed MDEV-4002: Server crash or valgrind errors in Item_func_group_concat::setup and Item_func_group_concat::add
mysql-test/r/group_by.result:
Added test case for failing GROUP_CONCAT ... ROLLUP queries
mysql-test/t/group_by.test:
Added test case for failing GROUP_CONCAT ... ROLLUP queries
sql/item_sum.cc:
Fixed issue where field->table pointed to different temporary table than expected.
Ensure that order->next points to the right object (could cause problems with setup_order())
Give error for wrong parameters to CHANGE MASTER
Extend MASTER_PASSWORD and MASTER_HOST lengths
mysql-test/suite/rpl/r/rpl_password_boundaries.result:
Test length of MASTER_PASSWORD, MASTER_HOST and MASTER_USER
mysql-test/suite/rpl/r/rpl_semi_sync.result:
Use different password than user name for better test coverage
mysql-test/suite/rpl/t/rpl_password_boundaries.test:
Test length of MASTER_PASSWORD, MASTER_HOST and MASTER_USER
mysql-test/suite/rpl/t/rpl_semi_sync.test:
Use different password than user name for better test coverage
sql/rpl_mi.h:
Extend MASTER_PASSWORD and MASTER_HOST lengths
sql/sql_repl.cc:
Give error for wrong parameters to CHANGE MASTER
sql/sql_repl.h:
Extend MASTER_PASSWORD and MASTER_HOST lengths
KILL now breaks locks inside InnoDB
Fixed possible deadlock when running INNODB STATUS
Added ha_kill_query() and kill_query() to send kill signal to all storage engines
Added reset_killed() to ensure we don't reset killed state while awake() is getting called
include/mysql/plugin.h:
Added thd_mark_as_hard_kill()
include/mysql/plugin_audit.h.pp:
Added thd_mark_as_hard_kill()
include/mysql/plugin_auth.h.pp:
Added thd_mark_as_hard_kill()
include/mysql/plugin_ftparser.h.pp:
Added thd_mark_as_hard_kill()
sql/handler.cc:
Added ha_kill_query() to send kill signal to all storage engines
sql/handler.h:
Added ha_kill_query() and kill_query() to send kill signal to all storage engines
sql/log_event.cc:
Use reset_killed()
sql/mdl.cc:
use thd->killed instead of thd_killed() to abort on soft kill
sql/sp_rcontext.cc:
Use reset_killed()
sql/sql_class.cc:
Fixed possible deadlock in INNODB STATUS by not getting thd->LOCK_thd_data if it's locked.
Use reset_killed()
Tell storge engines that KILL has been sent
sql/sql_class.h:
Added reset_killed() to ensure we don't reset killed state while awake() is getting called.
Added mark_as_hard_kill()
sql/sql_insert.cc:
Use reset_killed()
sql/sql_parse.cc:
Simplify detection of killed queries.
Use reset_killed()
sql/sql_select.cc:
Use reset_killed()
sql/sql_union.cc:
Use reset_killed()
storage/innobase/handler/ha_innodb.cc:
Added innobase_kill_query()
Fixed error reporting for interrupted queries.
storage/xtradb/handler/ha_innodb.cc:
Added innobase_kill_query()
Fixed error reporting for interrupted queries.
- Fixed broadcast without a proper mutex
- Don't break existing locks if we are just testing if we can get the lock
mysql-test/r/create_delayed.result:
Added test case for failures with INSERT DELAYED with CREATE and DROP TABLE
mysql-test/t/create_delayed.test:
Added test case for failures with INSERT DELAYED with CREATE and DROP TABLE
sql/mdl.cc:
Don't break existing locks for timeout=0 (ie, just check if there are conflicting locks).
This fixed the bug that INSERT DELAYED didn't work properly with CREATE TABLE
sql/sql_base.cc:
One neads to hold the mutex before doing a mysql_cond_broadcast()
This fixed the bug that INSERT DELAYED didn't work properly with DROP TABLE
sql/sql_insert.cc:
Protect setting of mysys_var->current_mutex.
Backport the fix from 10.0 tree
- The problem was that thd_killed() may be called by innodb from
an internal innodb thread.
- Fixed by not processing APC requests when we're not in the thread
that owns the APC target.
Made allocation of memory for statistical data in a table share to be thread safe.
This memory is now allocated in a special MEM_ROOT that is created for each
table share.
from a MERGE view.
The problem was in the lost ability to be null for the table of a left join if it
is a view/derived table.
It hapenned because setup_table_map(), was called earlier then we merged
the view or derived.
Fixed by propagating new maybe_null flag during Item::update_used_tables().
Change in join_outer.test and join_outer_jcl6.test appeared because
IS NULL reported no used tables (i.e. constant) for argument which could not be
NULL and new maybe_null flag was propagated for IS NULL argument (Item_field)
because table the Item_field belonged to changed its maybe_null status.
The patch lifts the limitation of the current implementation
of ALTER TABLE that does not allow to build unique/primary
indexes by sort for MyISAM and Aria engines.
Analysis:
The following call stack shows that it is possible to set Item_cache::value_cached, and the relevant value
without setting Item_cache::example.
#0 Item_cache_temporal::store_packed at item.cc:8395
#1 get_datetime_value at item_cmpfunc.cc:915
#2 resolve_const_item at item.cc:7987
#3 propagate_cond_constants at sql_select.cc:12264
#4 propagate_cond_constants at sql_select.cc:12227
#5 optimize_cond at sql_select.cc:13026
#6 JOIN::optimize at sql_select.cc:1016
#7 st_select_lex::optimize_unflattened_subqueries at sql_lex.cc:3161
#8 JOIN::optimize_unflattened_subqueries at opt_subselect.cc:4880
#9 JOIN::optimize at sql_select.cc:1554
The fix is to set Item_cache_temporal::example even when the value is
set directly by Item_cache_temporal::store_packed. This makes the
Item_cache_temporal object consistent.
have_openssl variable was ON even when OpenSSL was not used (but YaSSL was).
fix that, so that have_openssl really corresponds to OpenSSL
rename not_openssl.inc to not_ssl.inc and fix the test accordingly.
