- The problem was that JOIN::save/restore_query_plan() did not save/restore parts of
the query plan that are located inside SJ_MATERIALIZATION_INFO structures. This could
cause parts of one plan to be used with another, which led get_best_combination() to
constructing non-sensical join plans (and crash).
Fixed by saving/restoring SJM parts of the query plans.
- check_and_do_in_subquery_rewrites() will not set SUBS_MATERIALIZATION flag when it
records that the subquery predicate is to be converted into semi-join.
If convert_join_subqueries_to_semijoins() later decides not to convert to semi-join,
let it set SUBS_MATERIALIZATION flag, if appropriate.
Problem: commit_1innodb fails on pb2 after the patch for BUG#11758262
Background: Certain statements threw warnings only in statement mode causing
the result cintent mismatch.
Fix: disabled warnings from the statements.
- are_tables_local() failed to recognize the fact that OUTER_REF_TABLE_BIT is ok
for SJ-Materialization. This caused zero-length ref access to be constructed, which
led to an assert.
Binary log of master can get a partially logged event if the server
runs out of disk space and, while waiting for some space to be freed,
is shut down (or crashes). If the server is not stopped, it will just
wait endlessly for space to be freed, thus no partial event anomaly
occurs. The restarted master server has had a dubious policy to send
the incomplete event to slave which it apparently can't handle.
Although an error was printed out the fact of sending with unclear
error message is a source of confusion.
Actually the problem of presence an incomplete event in the binary log
was already fixed by WL 5493 (which was merged to our current trunk
branch, major version 5.6). The fix makes the server truncate the
binary log on server restart and recovery.
However 5.5 master can't do that. So the current issue is a problem of
sending incomplete events to the slave by 5.5 master.
It is fixed in this patch by changing the policy so that only complete
events are pushed by the dump thread to the IO thread. In addition,
the error text that master sends to the slave when an incomplete event
is found, now states that incomplete event may have been caused by an
out-of-disk space situation and provides coordinates of
the first and the last event bytes read.
mysql-test/std_data/bug11747416_32228_binlog.000001:
a binlog is added with the last event written partly.
mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result:
new result file is added.
mysql-test/suite/rpl/r/rpl_log_pos.result:
results updated.
mysql-test/suite/rpl/r/rpl_manual_change_index_file.result:
results updated.
mysql-test/suite/rpl/r/rpl_packet.result:
results updated.
mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test:
regression test for bug#11747416 : 32228 A disk full makes binary log corrupt
is added.
sql/share/errmsg-utf8.txt:
Increasing the explanatory part of ER_MASTER_FATAL_ERROR_READING_BINLOG error message twice
in order to fit to the updated version which carries some more info.
sql/sql_repl.cc:
Error text indicating a failure of reading from binlog that master delivers to the slave
is made more clear;
A policy to regard a partial event to send it out to the slave anyway is removed.
on Windows, kill <connection> can and almost always will return client error 2013 ("Lost connection...") on the killed connection,
On the server side, if connection is "sleeping" KILL will close the socket, thus socket error on client is expected.
1 - If a user had SHOW VIEW and SELECT privileges on a view and
this view was referencing another view, EXPLAIN SELECT on the outer
view (that the user had privileges on) could reveal the structure
of the underlying "inner" view as well as the number of rows in
the underlying tables, even if the user had privileges on none of
these referenced objects.
This happened because we used DEFINER's UID ("SUID") not just for
the view given in EXPLAIN, but also when checking privileges on
the underlying views (where we should use the UID of the EXPLAIN's
INVOKER instead).
We no longer run the EXPLAIN SUID (with DEFINER's privileges).
This prevents a possible exploit and makes permissions more
orthogonal.
2 - EXPLAIN SELECT would reveal a view's structure even if the user
did not have SHOW VIEW privileges for that view, as long as they
had SELECT privilege on the underlying tables.
Instead of requiring both SHOW VIEW privilege on a view and SELECT
privilege on all underlying tables, we were checking for presence
of either of them.
We now explicitly require SHOW VIEW and SELECT privileges on
the view we run EXPLAIN SELECT on, as well as all its
underlying views. We also require SELECT on all relevant
tables.
mysql-test/r/view_grant.result:
add extensive tests to illustrate desired behavior and
prevent regressions (as always).
mysql-test/t/view_grant.test:
add extensive tests to illustrate desired behavior and
prevent regressions (as always).
sql/sql_view.cc:
We no longer run the EXPLAIN SUID (with DEFINER's privileges).
To achieve this, we use a temporary, SUID-less TABLE_LIST for
the views while checking privileges.
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
******
BUG#11758262 - 50439: MARK INSERT...SEL...ON DUP KEY UPD,REPLACE...SEL,CREATE...[IGN|REPL] SEL
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
mysql-test/extra/rpl_tests/rpl_insert_duplicate.test:
Test removed: Added the test to rpl.rpl_insert_ignore.test
******
Test removed: the test is redundant as the same is being tested in rpl.rpl_insert_ignore.
mysql-test/extra/rpl_tests/rpl_insert_id.test:
Warnings disabled for the unsafe statements.
mysql-test/extra/rpl_tests/rpl_insert_ignore.test:
1. Disabled warnings while for unsafe statements
2. As INSERT...IGNORE is an unsafe statement, an insert ignore not changing any rows,
will not be logged in the binary log, in the ROW and MIXED modes. It will however be logged
in STATEMENT mode.
mysql-test/r/commit_1innodb.result:
updated result file
******
updated result file
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Updated result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
added tests for the statements marked as unsafe.
mysql-test/suite/rpl/r/rpl_insert_duplicate.result:
File Removed :Result file of rpl_insert_duplicate, which has been removed.
mysql-test/suite/rpl/r/rpl_insert_ignore.result:
Added the content of rpl.rpl_insert_duplicate here.
mysql-test/suite/rpl/r/rpl_insert_select.result:
Result file removed as the corresponding test has beenn removed.
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_insert_duplicate.test:
File Removed: this was a wrapper for rpl.rpl_insert_duplicate.test, which has been removed.
mysql-test/suite/rpl/t/rpl_insert_select.test:
File Removed: This test became redundant after this fix, This test showed how INSERT IGNORE...SELECT break replication, which has been handled in this fix.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Since all the tests are statement based bugs are being tested, having mixed format
forces the event to be written in row format. When the statement and causes the
test to fail as certain known bugs do not occur when the even is logged in row format.
sql/share/errmsg-utf8.txt:
added 6 new Warning messages.
******
added 6 new Warning messages.
sql/sql_lex.cc:
Added 6 new error Identifier [ER_BINLOG_STMT_UNSAFEE_*]
sql/sql_lex.h:
Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
******
Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
sql/sql_parse.cc:
added check for specific queries and marked them as unsafe.
******
added check for specific queries and marked them as unsafe.
Let CMake parse files with a ".in" suffix containing includes
Added default.release.in to replace default.release
Explained in README
New patch: replace 'include' with '#include' to avoid accidental matches
Analysis:
The crash is a result of the same cause as all similar
bugs (lp:827416, lp:718763, lp:778413, lp:806943,
lp:611690). The general pattern is that some optimization
requires the evaluation of some condition (e.g. the WHERE
clause), and this condition contains a subquery, such that
the subquery itself requires a temporary table for its
execution. During the subquery execution the original
tables in the FROM clause are replaced by the temporary
table needed for the final GROUP or ORDER operation. All
this happens during optimization of the outer query. Later
when EXPLAIN is run for the subquery, explain attempts to
print the name of the tables in the FROM clause, but it
finds there a temporary table without a corresponding
TABLE_LIST object. The attempt to print the name of a
NULL table list results in a crash.
Solution:
This patch extends the fix to bug lp:702301, and dissalows
constant substitution of aggregate functions if the filter
condition used to check MIN/MAX keys is an expensive condition.
SYSTEM VARIABLE NAME SQL_MAX_JOIN_SI
BACKGROUND:
ER_TOO_BIG_SELECT refers to SQL_MAX_JOIN_SIZE, which is the
old name for MAX_JOIN_SIZE.
FIX:
Support for old name SQL_MAX_JOIN_SIZE is removed in MySQL 5.6
and is renamed as MAX_JOIN_SIZE.So the errmsg.txt
and mysql.cc files have been updated and the corresponding result
files have also been updated.
Threat ER_CONNECTION_KILLED same as ER_SERVER_SHUTDOWN in replication (to get rid of a possible warning in error log)
sql/slave.cc:
Threat ER_CONNECTION_KILLED same as ER_SERVER_SHUTDOWN
CREATE_TIME IN INFORMATION_SC
It was impossible to determine MEMORY table creation time,
since it wasn't stored/exposed.
With this patch creation time is saved and it is available via
I_S.TABLES.CREATE_TIME.
Note: it was decided that additional analysis is required before
implementing UPDATE_TIME. Thus this patch doesn't store UPDATE_TIME.
Added 'innodb_file_format_check' as variable to ignore change to.
Tests that had to restore this amended
Two tests assumed it to be Antelope, make sure these run on a freshly
started server
For 5.5, apparently innodb_file_format_max is the one to ignore
One can set @@global.max_user_connections to -1 to block anyone, except SUPER user, to login.
If max_user_connection is 0, one can't change it without a restart (needed to get user connections counting to work correctly)
mysql-test/r/system_mysql_db.result:
Changed max_user_connections to handle negative numbers.
mysql-test/r/user_limits-2.result:
New test case that one can't change max_user_connection if it was 0
mysql-test/r/user_limits.result:
Fixed wrong error messages.
mysql-test/r/variables.result:
Store / restore max_user_connections (needed as there is now a --master.opt file that changes it)
mysql-test/t/subselect_mat_cost-master.opt:
Enable slow query log (as this test found some errors in slow query logging)
mysql-test/t/user_limits-2.test:
New test case that one can't change max_user_connection if it was 0
mysql-test/t/user_limits-master.opt:
Set max_user_connections (as one can't change it if it was 0)
mysql-test/t/user_limits.test:
Test max_user_connections -1
mysql-test/t/variables-master.opt:
Set max_user_connections (as one can't change it if it was 0)
mysql-test/t/variables.test:
Set/restore max_user_connections
scripts/Makefile.am:
Add a text message to mysql_fix_privilege_tables.sql that it's automaticly generated
scripts/mysql_system_tables.sql:
Change max_user_connections to signed
scripts/mysql_system_tables_fix.sql:
Change max_user_connections to signed
sql/item_func.cc:
Change SHOW_INT to be signed.
(Needed for max_user_connections and it's probably a bug that it was not originally signed)
sql/log.cc:
Remove some code that was not needed (All these variables are reset at start of query)
sql/mysql_priv.h:
Made max_user_connections signed.
Added max_user_connections_checking
sql/mysqld.cc:
Added max_user_connections_checking so that we know if max_user_connections was 0 at startup
(Which means that we will not do connection counting for accounts that don't have user resource limits)
Set thd->start_utime at same time as thr_create_utime. (Before start_utime could be < thr_create_utime which lead to wrong query counting)
sql/set_var.cc:
Don't allow one to change 'max_user_connections' if it was 0 at startup.
sql/sql_acl.cc:
Change user_connection counting to be negative.
sql/sql_connect.cc:
If max_user_connections is < 0 then only SUPER user can login.
Fixed wrong variable names for error messages.
Fixed wrong initial value for questions.
Set thd->start_utime and thd->thr_create_utime at startup. Needed to get time_out_user_resource_limits() to work.
sql/sql_show.cc:
SHOW_INT is now negative
sql/sql_yacc.yy:
Support negative values for MAX_USER_CONNECTIONS
sql/structs.h:
Make user connect counting work with signed numbers.
- Implement new approach to testing (the DBUG_EXECUTE_IF variant)
- add an 'evalp' mysqltest command that is like 'eval' except that
it prints the original query.
- Fix select_describe() not to change join_tab[i]->type
- More tests
Line autointersection point was treated as if it doesn't belong to the line.
It's in some way logical, but seems to confuse people. Fixed.
per_file_comments:
mysql-test/r/gis-precise.result
bug 857087 Wrong result with ST_INTERSECTS and LINESTRINGs
test result updated.
mysql-test/t/gis-precise.test
bug 857087 Wrong result with ST_INTERSECTS and LINESTRINGs
test case added.
sql/gcalc_tools.cc
bug 857087 Wrong result with ST_INTERSECTS and LINESTRINGs
Point of line autointersection handled as it belongs to the line.
sql/gcalc_tools.h
bug 857087 Wrong result with ST_INTERSECTS and LINESTRINGs
Gcalc_function::set_i_state() added
Reset 'examined_rows_count' in union to not count same rows twice
mysql-test/r/subselect_mat_cost.result:
Test also slow query logging
mysql-test/t/subselect_mat_cost.test:
Test also slow query logging
sql/sql_union.cc:
Reset 'examined_rows_count' in union to not count same rows twice
actually only testcase added as the bug was fixed already.
modified:
mysql-test/r/gis-precise.result
bug #857050 ST_WITHIN returns wrong result with MULTIPOINT and POLYGON
test result updated.
mysql-test/t/gis-precise.test
bug #857050 ST_WITHIN returns wrong result with MULTIPOINT and POLYGON
test case added.
sql/gcalc_tools.cc
superfluous variable removed.
The 'single point' event was forgotten in the relation's calculation
per-file comments:
mysql-test/r/gis-precise.result
fix for bug 857051 ST_EQUALS returns TRUE on two nonidentical MULTIPOINTs
test result updated.
mysql-test/t/gis-precise.test
fix for bug 857051 ST_EQUALS returns TRUE on two nonidentical MULTIPOINTs
test case added.
sql/gcalc_tools.cc
fix for bug 857051 ST_EQUALS returns TRUE on two nonidentical MULTIPOINTs
scev_single_point is properly handled.
return GEOMETRYCOLLECTION EMPTY, not NULL for the query
per-file comments:
mysql-test/r/gis.result
fix for 857050 ST_WITHIN returns wrong result with MULTIPOINT and POLYGON
test result updated.
sql/spatial.cc
fix for 857050 ST_WITHIN returns wrong result with MULTIPOINT and POLYGON
return of the Geometry::envelope() changed for the empty geometry.
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
- Provide fix_after_pullout() function for Item_in_optimizer and other Item_XXX classes (basically, all of them
that have eval_not_null_tables, which means they have special rules for calculating not_null_tables_cache value)
855485 ST_CROSSES returns different result than PostGIS for overlapping polygons
855487 ST_WITHIN returns wrong result for partially overlapping polygons
855492 ST_WITHIN returns TRUE on point on the edge of a polygon
855497 ST_ENVELOPE of GEOMETRYCOLLECTION EMPTY returns NULL and not GEOMETRYCOLLECTION EMPTY
855503 ST_EQUALS reports TRUE between a POLYGON and a MULTILINESTRING
855505 ST_TOUCHES reports TRUE for intersecting polygon and linestring
Changed the way weird functions like Crosses or Touches treated.
Added BORDER handling to the Gcalc_function.
per-file comments:
mysql-test/r/gis-precise.result
GIS bugs fixed.
test result updated.
mysql-test/t/gis-precise.test
GIS bugs fixed.
test cases added.
sql/gcalc_slicescan.h
GIS bugs fixed.
sql/gcalc_tools.cc
GIS bugs fixed.
sql/gcalc_tools.h
GIS bugs fixed.
sql/item_create.cc
GIS bugs fixed.
sql/item_geofunc.cc
GIS bugs fixed.
sql/item_geofunc.h
GIS bugs fixed.
sql/spatial.cc
GIS bugs fixed.
per-file comments:
mysql-test/r/gis.result
bug 855336 ST_LENGTH does not work on GEOMETRYCOLLECTIONs fixed.
test result updated.
mysql-test/t/gis.test
bug 855336 ST_LENGTH does not work on GEOMETRYCOLLECTIONs fixed.
test case added.
sql/item_geofunc.cc
bug 855336 ST_LENGTH does not work on GEOMETRYCOLLECTIONs fixed.
geom_length() call fixed.
sql/spatial.cc
bug 855336 ST_LENGTH does not work on GEOMETRYCOLLECTIONs fixed.
Geometry_collection::geom_length implemented.
sql/spatial.h
bug 855336 ST_LENGTH does not work on GEOMETRYCOLLECTIONs fixed.
Geometry_collection::geom_length declaration added.
855253 Compiler error: gcalc_slicescan.cc:2036: error: suggest parentheses around comparison in operand of .|. in maria-5.3-gis
850775 ST_AREA does not work on GEOMETRYCOLLECTIONs in maria-5.3-gis
per-file comments:
mysql-test/r/gis.result
test result updated.
mysql-test/t/gis.test
test case added for 850775.
sql/gcalc_slicescan.cc
compiler error fixed.
sql/spatial.cc
ST_AREA implementation for GEOMETRY_COLLECTION, POINT and LINESTRING.
sql/spatial.h
area() declarations added.
