mysql-test/extra/rpl_tests/rpl_implicit_commit_binlog.test:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/r/rpl_mixed_implicit_commit_binlog.result:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/r/rpl_mysql_upgrade.result:
Suppressed warning messages due to unsafe statements.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/r/rpl_stm_implicit_commit_binlog.result:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/t/rpl_mixed_implicit_commit_binlog.test:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/t/rpl_mysql_upgrade.test:
Suppressed warning messages due to unsafe statements.
mysql-test/suite/rpl/t/rpl_row_implicit_commit_binlog.test:
Re-enabled some parts of the test after BUG#46572
mysql-test/suite/rpl/t/rpl_stm_implicit_commit_binlog.test:
Re-enabled some parts of the test after BUG#46572
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
For application compatibility reasons MySQL converts "<autoincrement_column> IS NULL"
predicates to "<autoincrement_column> = LAST_INSERT_ID()" in the first SELECT following an
INSERT regardless of whether they're top level predicates or not. This causes wrong and
obscure results when these predicates are combined with others on the same columns. Fixed
by only doing the transformation on a single top-level predicate if a special SQL mode is
turned on (sql_auto_is_null).
Also made sql_auto_is_null off by default.
per-file comments:
mysql-test/r/func_isnull.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
test result updated
mysql-test/t/func_isnull.test
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
test case added
sql/mysqld.cc
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
sql_auto_is_null now is OFF by default.
sql/sql_select.cc
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
remove_eq_conds() split in two parts - one only checks the upper condition,
the req_remove_eq_conds() recursively checks all the condition tree.
mysql-test/extra/rpl_tests/rpl_insert_id.test
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
test fixed (set the sql_auto_is_null variable)
mysql-test/r/mysqlbinlog.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/r/mysqlbinlog2.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/r/odbc.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/r/query_cache.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/r/user_var-binlog.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/binlog/r/binlog_row_ctype_ucs.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/binlog/r/binlog_stm_ctype_ucs.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/rpl/r/rpl_insert_id.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/rpl/r/rpl_sp.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/t/odbc.test
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
test fixed (set the sql_auto_is_null variable)
binlog, replication aborts
In SBR or MBR, the schema name is not being written to the binlog
when executing a LOAD DATA statement. This becomes a problem when
the current database (lets call it db1) is different from the
table's schema (lets call it db2). For instance, take the
following statements:
use db1;
load data local infile 'infile.txt' into table db2.t
Should this statement be logged without t's schema (db2), when
replaying it, one can get db1.t populated instead of db2.t (if
db1.t exists). On the other hand, if there is no db1.t at all,
replication will stop.
We fix this by always logging the table (in load file) with fully
qualified name when its schema is different from the current
database or when no default database was selected.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
Backporting BUG#43789 to mysql-5.1-bugteam
The replication was generating corrupted data, warning messages on Valgrind
and aborting on debug mode while replicating a "null" to "not null" field.
Specifically the unpack_row routine, was considering the slave's table
definition and trying to retrieve a field value, where there was nothing to be
retrieved, ignoring the fact that the value was defined as "null" by the master.
To fix the problem, we proceed as follows:
1 - If it is not STRICT sql_mode, implicit default values are used, regardless
if it is multi-row or single-row statement.
2 - However, if it is STRICT mode, then a we do what follows:
2.1 If it is a transactional engine, we do a rollback on the first NULL that is
to be set into a NOT NULL column and return an error.
2.2 If it is a non-transactional engine and it is the first row to be inserted
with multi-row, we also return the error. Otherwise, we proceed with the
execution, use implicit default values and print out warning messages.
Unfortunately, the current patch cannot mimic the behavior showed by the master
for updates on multi-tables and multi-row inserts. This happens because such
statements are unfolded in different row events. For instance, considering the
following updates and strict mode:
(master)
create table t1 (a int);
create table t2 (a int not null);
insert into t1 values (1);
insert into t2 values (2);
update t1, t2 SET t1.a=10, t2.a=NULL;
t1 would have (10) and t2 would have (0) as this would be handled as a
multi-row update. On the other hand, if we had the following updates:
(master)
create table t1 (a int);
create table t2 (a int);
(slave)
create table t1 (a int);
create table t2 (a int not null);
(master)
insert into t1 values (1);
insert into t2 values (2);
update t1, t2 SET t1.a=10, t2.a=NULL;
On the master t1 would have (10) and t2 would have (NULL). On
the slave, t1 would have (10) but the update on t1 would fail.
Backporting BUG#38173 to mysql-5.1-bugteam
The reason of the bug was incompatibile with the master side behaviour.
INSERT query on the master is allowed to insert into a table without specifying
values of DEFAULT-less fields if sql_mode is not strict.
Fixed with checking sql_mode by the sql thread to decide how to react.
Non-strict sql_mode should allow Write_rows event to complete.
todo: warnings can be shown via show slave status, still this is a
separate rather general issue how to show warnings for the slave threads.
The problem is that there is only one autoinc value associated with
the query when binlogging. If more than one autoinc values are used
in the query, the autoinc values after the first one can be inserted
wrongly on slave. So these autoinc values can become inconsistent on
master and slave.
The problem is resolved by marking all the statements that invoke
a trigger or call a function that updated autoinc fields as unsafe,
and will switch to row-format in Mixed mode. Actually, the statement
is safe if just one autoinc value is used in sub-statement, but it's
impossible to check how many autoinc values are used in sub-statement.)
mysql-test/suite/rpl/r/rpl_auto_increment_update_failure.result:
Test result for bug#45677
mysql-test/suite/rpl/t/rpl_auto_increment_update_failure.test:
Added test to verify the following two properties:
P1) insert/update in an autoinc column causes statement to
be logged in row format if binlog_format=mixed
P2) if binlog_format=mixed, and a trigger or function contains
two or more inserts/updates in a table that has an autoinc
column, then the slave should not go out of sync, even if
there are concurrent transactions.
sql/sql_base.cc:
Added function 'has_write_table_with_auto_increment' to check
if one (or more) write tables have auto_increment columns.
Removed function 'has_two_write_locked_tables_with_auto_increment',
because the function is included in function
'has_write_table_with_auto_increment'.
vs not null
NOTE: Backporting the patch to next-mr.
The replication was generating corrupted data, warning messages on Valgrind
and aborting on debug mode while replicating a "null" to "not null" field.
Specifically the unpack_row routine, was considering the slave's table
definition and trying to retrieve a field value, where there was nothing to be
retrieved, ignoring the fact that the value was defined as "null" by the master.
To fix the problem, we proceed as follows:
1 - If it is not STRICT sql_mode, implicit default values are used, regardless
if it is multi-row or single-row statement.
2 - However, if it is STRICT mode, then a we do what follows:
2.1 If it is a transactional engine, we do a rollback on the first NULL that is
to be set into a NOT NULL column and return an error.
2.2 If it is a non-transactional engine and it is the first row to be inserted
with multi-row, we also return the error. Otherwise, we proceed with the
execution, use implicit default values and print out warning messages.
Unfortunately, the current patch cannot mimic the behavior showed by the master
for updates on multi-tables and multi-row inserts. This happens because such
statements are unfolded in different row events. For instance, considering the
following updates and strict mode:
(master)
create table t1 (a int);
create table t2 (a int not null);
insert into t1 values (1);
insert into t2 values (2);
update t1, t2 SET t1.a=10, t2.a=NULL;
t1 would have (10) and t2 would have (0) as this would be handled as a
multi-row update. On the other hand, if we had the following updates:
(master)
create table t1 (a int);
create table t2 (a int);
(slave)
create table t1 (a int);
create table t2 (a int not null);
(master)
insert into t1 values (1);
insert into t2 values (2);
update t1, t2 SET t1.a=10, t2.a=NULL;
On the master t1 would have (10) and t2 would have (NULL). On
the slave, t1 would have (10) but the update on t1 would fail.
NOTE: Backporting the patch to next-mr.
The reason of the bug was incompatibile with the master side behaviour.
INSERT query on the master is allowed to insert into a table without specifying
values of DEFAULT-less fields if sql_mode is not strict.
Fixed with checking sql_mode by the sql thread to decide how to react.
Non-strict sql_mode should allow Write_rows event to complete.
todo: warnings can be shown via show slave status, still this is a
separate rather general issue how to show warnings for the slave threads.
files
NOTE: this is the backport to next-mr.
SHOW BINLOG EVENTS does not work with relay log files. If issuing
"SHOW BINLOG EVENTS IN 'relay-log.000001'" in a non-empty relay
log file (relay-log.000001), mysql reports empty set.
This patch addresses this issue by extending the SHOW command
with RELAYLOG. Events in relay log files can now be inspected by
issuing SHOW RELAYLOG EVENTS [IN 'log_name'] [FROM pos] [LIMIT
[offset,] row_count].
mysql-test/extra/rpl_tests/rpl_show_relaylog_events.inc:
Shared part of the test case.
mysql-test/include/show_binlog_events.inc:
Added options $binary_log_file, $binary_log_limit_row,
$binary_log_limit_offset so that show_binlog_events can take
same parameters as SHOW BINLOG EVENTS does.
mysql-test/include/show_relaylog_events.inc:
Clone of show_binlog_events for relaylog events.
mysql-test/suite/rpl/t/rpl_row_show_relaylog_events.test:
Test case for row based replication.
mysql-test/suite/rpl/t/rpl_stm_mix_show_relaylog_events.test:
Test case for statement and mixed mode replication.
sql/lex.h:
Added RELAYLOG symbol.
sql/mysqld.cc:
Added "show_relaylog_events" to status_vars.
sql/sp_head.cc:
Set SQLCOM_SHOW_RELAYLOG_EVENTS to return flags=
sp_head::MULTI_RESULTS; in sp_get_flags_for_command as
SQLCOM_SHOW_BINLOG_EVENTS does.
sql/sql_lex.h:
Added sql_command SQLCOM_SHOW_RELAYLOG_EVENTS to lex enum_sql_command.
sql/sql_parse.cc:
Added handling of SQLCOM_SHOW_RELAYLOG_EVENTS.
sql/sql_repl.cc:
mysql_show_binlog_events set to choose the log file to use based on
the command issued (SHOW BINLOG|RELAYLOG EVENTS).
sql/sql_yacc.yy:
Added RELAYLOG to the grammar.
failure to cleanup of table
The test case was not dropping a table before exiting (ie, it was
not cleaning itself after execution). In this case, the warning
message stating that the test did not do a proper cleanup was
deterministic (which can be annoying).
I have found other tests cases on which mtr sporadically reports
that they have not cleaned up after execution:
- rpl_ndb_circular
- rpl_failed_optimize
In this case, the master was dropping a table but there was no
synchronization between the slave and the master.
This patch addresses the rpl_ndb_circular_simplex case by adding
the missing DROP table. The other cases are fixed by deploying
the missing sync_slave_with_master instruction.
Network error happened here, but it can be caused by CR_CONNECTION_ERROR,
CR_CONN_HOST_ERROR, CR_SERVER_GONE_ERROR, CR_SERVER_LOST, ER_CON_COUNT_ERROR,
and ER_SERVER_SHUTDOWN. We just check CR_SERVER_LOST here, so the test fails.
To fix the problem, check all errors that can be cause by the master shutdown.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
Added a 'if' sentence to check all errors that can be cause by the master shutdown.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
Test result is updated duo to the patch of bug#46931
In RBR, There is an inconsistency between slaves and master.
When INSERT statement which includes an auto_increment field is executed,
Store engine of master will check the value of the auto_increment field.
It will generate a sequence number and then replace the value, if its value is NULL or empty.
if the field's value is 0, the store engine will do like encountering the NULL values
unless NO_AUTO_VALUE_ON_ZERO is set into SQL_MODE.
In contrast, if the field's value is 0, Store engine of slave always generates a new sequence number
whether or not NO_AUTO_VALUE_ON_ZERO is set into SQL_MODE.
SQL MODE of slave sql thread is always consistency with master's.
Another variable is related to this bug.
If generateing a sequence number is decided by the values of
table->auto_increment_field_not_null and SQL_MODE(if includes MODE_NO_AUTO_VALUE_ON_ZERO)
The table->auto_increment_is_not_null is FALSE, which causes this bug to appear. ..
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
Essentially, Bug#45574 results in this bug. The 'CREATE DATABASE IF NOT EXISTS' statement was not
binlogged, when the database has existed.
Sometimes, the master and slaves become inconsistent. The "CREATE DATABASE
IF NOT EXISTS mysqltest1" statement is not binlogged
if the db 'mysqltest1' existed before the test case is executed.
So the db 'mysqltest1' can't be created on slave.
Patch of Bug#45574 has resolved this problem.
But I think it is better to replace 'mysqltest1' by default db 'test'.
Slave does not correctly handle "expected errors" leading to inconsistencies
between the mater and slave. Specifically, when a statement changes both
transactional and non-transactional tables, the transactional changes are
automatically rolled back on the master but the slave ignores the error and
does not roll them back thus leading to inconsistencies.
To fix the problem, we automatically roll back a statement that fails on
the slave but note that the transaction is not rolled back unless a "rollback"
command is in the relay log file.
mysql-test/extra/rpl_tests/rpl_mixing_engines.test:
Enabled item 13.e which was disabled because of the bug fixed by the
current and removed item 14 which was introduced by mistake.
binlog
Mixing transactional (T) and non-transactional (N) tables on behalf of a
transaction may lead to inconsistencies among masters and slaves in STATEMENT
mode. The problem stems from the fact that although modifications done to
non-transactional tables on behalf of a transaction become immediately visible
to other connections they do not immediately get to the binary log and therefore
consistency is broken. Although there may be issues in mixing T and M tables in
STATEMENT mode, there are safe combinations that clients find useful.
In this bug, we fix the following issue. Mixing N and T tables in multi-level
(e.g. a statement that fires a trigger) or multi-table table statements (e.g.
update t1, t2...) were not handled correctly. In such cases, it was not possible
to distinguish when a T table was updated if the sequence of changes was N and T.
In a nutshell, just the flag "modified_non_trans_table" was not enough to reflect
that both a N and T tables were changed. To circumvent this issue, we check if an
engine is registered in the handler's list and changed something which means that
a T table was modified.
Check WL 2687 for a full-fledged patch that will make the use of either the MIXED or
ROW modes completely safe.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Truncate statement is wrapped in BEGIN/COMMIT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Truncate statement is wrapped in BEGIN/COMMIT.
This is a post-push fix addressing review requests and
problems with extra warnings.
Problem 1: The sub-statement where an unsafe warning was detected was
printed as part of the warning. This was ok for statements that
were unsafe due to, e.g., calls to UUID(), but did not make
sense for statements that were unsafe because there was more than
one autoincrement column (unsafeness in this case comes from the
combination of several sub-statements).
Fix 1: Instead of printing the sub-statement, print an explanation
of why the statement is unsafe.
Problem 2:
When a recursive construct (i.e., stored proceure, stored
function, trigger, view, prepared statement) contained several
sub-statements, and at least one of them was unsafe, there would be
one unsafeness warning per sub-statement - even for safe
sub-statements.
Fix 2:
Ensure that each type of warning is printed at most once, by
remembering throughout the execution of the statement which types
of warnings have been printed.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
- Clarified comment per review request.
- Added checks for the number of warnings in each invocation.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Per review request, replaced @@session.binlog_format by
@@global.binlog_format, since INSERT DELAYED reads the global
variable. (In this test case, the two variables have the same
value, so the change is cosmetic.)
mysql-test/r/sp_trans.result:
updated result file
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_ps.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file. Note that duplicate warnings are now gone.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Added tests for: (1) a statement that is unsafe in many ways;
(2) a statement that is unsafe in the same way several times.
- Use -- style to invoke mysqltest commands.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
updated result file
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Per review request, added comment explaining what the test case
does (copied from rpl_stm_found_rows.test)
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Clarified grammar in comment.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Updated result file.
sql/item_create.cc:
Made set_stmt_unsafe take one parameter, describing the
type of unsafeness.
sql/sp_head.cc:
Added unsafe_flags field and made it hold all the unsafe flags.
sql/sp_head.h:
- Removed the BINLOG_ROW_BASED_IF_MIXED flag from m_flags.
Instead, we use the new unsafe_flags field to hold the
unsafeness state of the sp.
- Made propagate_attributes() copy all unsafe flags.
sql/sql_base.cc:
- Made LEX::set_stmt_unsafe() take an extra argument.
- Made binlog_unsafe_warning_flags store the type of unsafeness.
- Per review requests, clarified comments
- Added DBUG printouts
sql/sql_class.cc:
- Made warnings be generated in issue_warnings() and call that from
binlog_query(). Wrote issue_warnings(), which prints zero or more
warnings, avoiding to print warnings more than once per statement.
- Per review request, added @todo so that we remember to assert
correct behavior in binlog_query.
sql/sql_class.h:
- Removed BINLOG_WARNING_PRINTED
- Use [set|clear]_current_stmt_binlog_row_based() instead of
modifying the flag directly.
- added issue_unsafe_warnings() (only called from binlog_unsafe)
- Per review request, improved some documentation.
sql/sql_insert.cc:
Added extra argument to LEX::set_stmt_unsafe()
sql/sql_lex.h:
- Added enum_binlog_stmt_unsafe, listing all types of unsafe
statements.
- Per review requests, improved many comments for member
functions.
- Added [get|set]_stmt_unsafe_flags(), which return/set all the
unsafe flags for a statement.
sql/sql_parse.cc:
- Renamed binlog_warning_flags to binlog_unsafe_warning_flags.
- Per review requests, improved comment.
sql/sql_view.cc:
Made views propagate all the new unsafe flags.
sql/sql_yacc.yy:
Added parameter to set_stmt_unsafe().
storage/innobase/handler/ha_innodb.cc:
Per review requests, replaced DBUG_EXECUTE_IF() by DBUG_EVALUATE_IF().
The "get_master_version_and_clock(...)" function in sql/slave.cc ignores
error and passes directly when queries fail, or queries succeed
but the result retrieved is empty.
The "get_master_version_and_clock(...)" function should try to reconnect master
if queries fail because of transient network problems, and fail otherwise.
The I/O thread should print a warning if the some system variables do not
exist on master (very old master)
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
Added test file for bug #45214
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
Added test result for bug #45214
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Added test file for bug #45214
sql/slave.cc:
The 'is_network_error()' function is added for checking if the error is caused by network.
Added a new return value (2) to 'get_master_version_and_clock()' function result set
to indicate transient network errors when queries fail, and the caller should
try to reconnect in this case.
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
The test case added failed sporadically on PB. This is due to the
fact that the user thread in some cases is waiting for slave IO
to stop and then check the error number. Thence, sometimes the
user thread would race for the error number with IO thread.
This post push fix addresses this by replacing the wait for slave
io to stop with a wait for slave io error (as it seems it was
added in 6.0 also after patch on which this is based was
pushed). This implied backporting wait_for_slave_io_error.inc
from 6.0 also.
The server was not cleaning the last IO error and error number when
resetting slave.
This patch addresses this issue by backporting into 5.1 part of the
patch in BUG 34654. A fix for this issue had already been pushed into
6.0 as part of the aforementioned bug, however the patch also included
some refactoring. The fix for 5.1 does not take into account the
refactoring part.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Backported the test case and improved with deploying include/start_slave.inc
in relevant spots.
sql/slave.cc:
Backported part of patch from 6.0 that includes cleaning
mi->clear_error() at:
1. beginning of handle_slave_io
2. on successful connection
Also, backported the assertion added in the original patch.
sql/sql_repl.cc:
Backported the call to mi->clear_error() on reset_slave().
Fix mysql-test-run.pl to not terminate early when warnings in error logs are detected during
server shutdown. Instead, give a nice summary report at the end of the failures.
Fix code to make 100% sure no failures will go undetected.
Revert earlier wrong change.
Fix race with port allocation semaphore file permissions.
Adjust testsuite to copy with new PBXT engine now in the tree. The PBXT engine causes an
extra table to appear in the INFORMATION_SCHEMA. This causes different output for a few
test cases.
dbug/dbug.c:
If DbugParse() is called multiple times, the stack->keywords for the
top stack frame could be overwritten without being freed, causing a
memory leak reported by Valgrind.
include/my_global.h:
Add useful macro for different values when Valgrind (HAVE_purify) and not.
mysql-test/extra/rpl_tests/rpl_auto_increment.test:
Omit pbxt variables from show variables output.
mysql-test/include/have_pbxt.inc:
Add facility to disable test if PBXT engine is not available.
mysql-test/lib/mtr_report.pm:
Give a nice summary report at the end of tests of any warnings seen in logs during
server shutdowns.
mysql-test/lib/mtr_unique.pm:
Move chmod 777 to greatly reduce the risk of leaving the port semaphore file unaccessible
bu other users.
mysql-test/mysql-test-run.pl:
Don't abort in case of warnings detected, instead give a nice summary report.
Fix code to make 100% sure no failures will go undetected.
Revert earlier wrong change when master disconnects early.
mysql-test/r/information_schema.result:
Omit PBXT INFORMATION_SCHEMA table from output.
Move part of test to information_schema_all_engines.
mysql-test/r/information_schema_all_engines.result:
New file for information_schema tests that depend on which engines are available.
mysql-test/r/information_schema_db.result:
Move part of test to information_schema_all_engines.
mysql-test/r/innodb-autoinc.result:
Omit pbxt variables from show variables output.
mysql-test/r/mysqlshow.result:
Move part of test to information_schema_all_engines.
mysql-test/suite/rpl/r/rpl_auto_increment.result:
Omit pbxt variables from show variables output.
mysql-test/t/information_schema.test:
Omit PBXT INFORMATION_SCHEMA table from output.
Move part of test to information_schema_all_engines.
mysql-test/t/information_schema_all_engines.test:
New file for information_schema tests that depend on which engines are available.
mysql-test/t/information_schema_db.test:
Move part of test to information_schema_all_engines.
mysql-test/t/innodb-autoinc.test:
Omit pbxt variables from show variables output.
mysql-test/t/mysqlshow.test:
Move part of test to information_schema_all_engines.
mysql-test/valgrind.supp:
Add variant suppression (different system library versions).
Add suppression for problem with inet_ntoa().
sql/mysqld.cc:
Fix missing DBUG_RETURN.
Fix uninitialised thd->connect_utime, likely introduced by pool_of_threads.
sql/set_var.cc:
Fix one-byte buffer overflow in several places.
Fix unsafe use of String::c_ptr() of stack-allocated String buffer.
sql/sql_select.cc:
Silence valgrind warning due to GCC bug.
sql/sql_string.h:
Document potential problem with String::c_ptr() and String() constructor with caller-supplied buffer.
storage/archive/azio.c:
Silence Valgrind false warning for libz.
1. Test case was rewritten completely.
2. Test covers 3 cases:
a) do deadlock on slave, wait retries of transaction, unlock slave before lock
timeout;
b) do deadlock on slave and wait error 'lock timeout exceed' on slave;
c) same as b) but if of max relay log size = 0;
3. Added comments inline.
4. Updated result file.
LOAD_FILE
LOAD_FILE is not safe to replicate in STATEMENT mode, because it
depends on a file (which is loaded on master and may not exist in
slave(s)). This leads to scenarios on which the slave replicates the
statement with 'load_file' and it will try to load the file from local
file system. Given that the file may not exist in the slave filesystem
the operation will not succeed (probably returning NULL), causing
master and slave(s) to diverge. However, when using MIXED mode
replication, this can be made to work, if the statement including
LOAD_FILE is marked as unsafe, triggering a switch to ROW mode,
meaning that the contents of the file are written to binlog as row
events. Consequently, the contents from the file in the master will
reach the slave via the binlog.
This patch addresses this bug by marking the load_file function as
unsafe. When in mixed mode and when LOAD_FILE is issued, there will be
a switch to row mode. Furthermore, when in statement mode, the
LOAD_FILE will raise a warning that the statement is unsafe in that
mode.
mysql-test/extra/rpl_tests/rpl_loadfile.test:
Extra file that is "sourced" on both rpl_loadfile and rpl_stm_loadfile
test files.
mysql-test/suite/rpl/r/rpl_loadfile.result:
Updated with the results from the test case added to this file.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
Result file for rpl_loadfile test split with the warnings in statement
mode.
mysql-test/suite/rpl/t/rpl_loadfile.test:
After splitting the original rpl_loadfile file, this one is only
required to be executed in mixed or row format.
Appended the test for 39701 to this file.
mysql-test/suite/rpl/t/rpl_stm_loadfile.test:
Split the original rpl_loadfile test because load_file now raises
a warning when in statement mode. The goal of this split is
two-fold: i) make the test case more resilient; ii) assert that
warnings are indeed raised when in statement mode.
sql/item_create.cc:
Added the set_stmt_unsafe call to lex.
