------------------------------------------------------------
revno: 2630.13.2
committer: Davi Arnaut <davi@sun.com>
branch nick: WL4284-6.0
timestamp: Thu 2008-07-03 18:26:51 -0300
message:
Remove unused USING_TRANSACTIONS macro which unnecessarily
cumbers the code. This macro is a historical leftover and
has no practical use since its unconditionally defined.
This is the non-ndb part of the patch.
The return value of mysql_bin_log.write was ignored by most callers,
which may lead to inconsistent on master and slave if the transaction
was committed while the binlog was not correctly written. If
my_error() is call in mysql_bin_log.write, this could also lead to
assertion issue if my_ok() or my_error() is called after.
This fixed the problem by let the caller to check and handle the
return value of mysql_bin_log.write. This patch only adresses the
simple cases.
revno: 2476.784.2
committer: davi@moksha.local
timestamp: Thu 2007-09-27 16:56:27 -0300
message:
Bug#28870 check that table locks are released/reset
The problem is that some mysql_lock_tables error paths are not
resetting the tables lock type back to TL_UNLOCK. If the lock
types are not reset properly, a table might be returned to the
table cache with wrong lock_type.
The proposed fix is to ensure that the tables lock type is always
properly reset when mysql_lock_tables fails. This is a
incompatible change with respect to the process state information.
------------------------------------------------------------
revno: 2597.4.17
revision-id: sp1r-davi@mysql.com/endora.local-20080328174753-24337
parent: sp1r-anozdrin/alik@quad.opbmk-20080328140038-16479
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 14:47:53 -0300
message:
Bug#15192 "fatal errors" are caught by handlers in stored procedures
The problem is that fatal errors (e.g.: out of memory) were being
caught by stored procedure exception handlers which could cause
the execution to not be stopped due to a continue handler.
The solution is to not call any exception handler if the error is
fatal and send the fatal error to the client.
------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
Bug#41860: Without Windows named pipe
The problem was that the patch for Bug#10374 broke named pipe
and shared memory transports on Windows due to a failure to
implement a dummy poll method for transports other than BSD
sockets. Another problem was that mysqltest lacked support
for named pipe and shared memory connections, which lead to
misleading test cases that were supposed run common queries
over both transports.
The solution is to properly implement, at the VIO layer, the
poll and is_connected methods. The is_connected method is
implemented for every suppported transport and the poll one
only where it makes sense. Furthermore, support for named pipe
and shared memory connections is added to mysqltest as to
enable testing of both transports using the test suite.
------------------------------------------------------------
revno: 2597.37.3
revision-id: sp1r-davi@mysql.com/endora.local-20080328123626-16430
parent: sp1r-anozdrin/alik@quad.opbmk-20080327125300-11290
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 09:36:26 -0300
message:
Bug#10374 GET_LOCK does not let connection to close on the server side if it's aborted
The problem is that the server doesn't detect aborted connections which
are waiting on a lock or sleeping (user sleep), wasting system resources
for a connection that is already dead.
The solution is to peek at the connection every five seconds to verify if
the connection is not aborted. A aborted connection is detect by polling
the connection socket for available data to be read or end of file and in
case of eof, the wait is aborted and the connection killed.
mysql-next-mr-bugfixing.
Bug no 32858 was fixed in two different ways in what was
then called mysql 5.1 and 6.0. The fix in 6.0 was very
different since bugfix no 33204 was present. Furthermore,
the two fixes were not compatible. Hence in order to
backport Bug#33204 to the 5.1-based mysql-next-mr-bugfixing,
it was necessary to remove the 5.1 fix of 32858 and apply
the 6.0 version of the fix.
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
If a thread is killed in the server, we throw "shutdown" only if one is actually in
progress; otherwise, we throw "query interrupted".
Control-C in the mysql command-line client is "incremental" now.
First Control-C sends KILL QUERY (when connected to 5.0+ server, otherwise, see next)
Next Control-C sends KILL CONNECTION
Next Control-C aborts client.
As the first two steps only pertain to an existing query,
Control-C will abort the client right away if no query is running.
client will give more detailed/consistent feedback on Control-C now.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
Post-push fix.
Problem: After the original bugfix, if a statement is unsafe,
binlog_format=mixed, and engine is statement-only, a warning was
generated and the statement executed. However, it is a fundamental
principle of binlogging that binlog_format=mixed should guarantee
correct logging, no compromise. So correct behavior is to generate
an error and don't execute the statement.
Fix: Generate error instead of warning.
Since issue_unsafe_warnings can only generate one error message,
this allows us to simplify the code a bit too:
decide_logging_format does not have to save the error code for
issue_unsafe_warnings
columns without where/group
Simple SELECT with implicit grouping used to return many rows if
the query was ordered by the aggregated column in the SELECT
list. This was incorrect because queries with implicit grouping
should only return a single record.
The problem was that when JOIN:exec() decided if execution needed
to handle grouping, it was assumed that sum_func_count==0 meant
that there were no aggregate functions in the query. This
assumption was not correct in JOIN::exec() because the aggregate
functions might have been optimized away during JOIN::optimize().
The reason why queries without ordering behaved correctly was
that sum_func_count is only recalculated if the optimizer chooses
to use temporary tables (which it does in the ordered case).
Hence, non-ordered queries were correctly treated as grouped.
The fix for this bug was to remove the assumption that
sum_func_count==0 means that there is no need for grouping. This
was done by introducing variable "bool implicit_grouping" in the
JOIN object.
local storage for query cache).
We need more than one pointer in a thread to
represent the query cache and net->query_cache_query can not be used
any more (due to ABI compatibility issues and to different life
time of NET and THD).
This is a backport of the following patch from 6.0:
----------------------------------------------------------
revno: 2476.1157.2
committer: kostja@bodhi.(none)
timestamp: Sat 2007-06-16 13:29:24 +0400
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
