1. rr record -h randomizes number of processors. Disable THREAD_POOL_SIZE check.
2. check for kernel.perf_event_paranoid for user-friendly error message.
PR#1127: Fix is_check_constraints.result to be compatibile with 10.3
The patch is done according to the original patch for MDEV-14474
1edd09c325 and not one which is merged on server
d526679efd.
This patch includes:
- Rename from `is_check_constraint` to `is_check_constraints` to tests
and results
- Per review, change the order of fields in IS check_constraints table by adding
the column `table_name` before `constraint_name`. According to the standard
2006 there is no `table_name` column.
- Original patch and one in `10.3` supports embedded server this patch doesn't
support. After the merge `10.3` will not support also.
- Don't use patch c8b8b01b61 to change the length of `CHECK_CLAUSE` field
PR#1150: MDEV-18440: Information_schema.check_constraints possible data leak
This patch is extension of PR 1127 and includes:
- Check for table grants
- Additional test according to the MDEV specification
Signed-off-by: Vicențiu Ciorbaru <vicentiu@mariadb.org>
PR#1127: Fix is_check_constraints.result to be compatibile with 10.3
The patch is done according to the original patch for MDEV-14474
1edd09c325 and not one which is merged on server
d526679efd.
This patch includes:
- Rename from `is_check_constraint` to `is_check_constraints` to tests
and results
- Per review, change the order of fields in IS check_constraints table by adding
the column `table_name` before `constraint_name`. According to the standard
2006 there is no `table_name` column.
- Original patch and one in `10.3` supports embedded server this patch doesn't
support. After the merge `10.3` will not support also.
- Don't use patch c8b8b01b61 to change the length of `CHECK_CLAUSE` field
PR#1150: MDEV-18440: Information_schema.check_constraints possible data leak
This patch is extension of PR 1127 and includes:
- Check for table grants
- Additional test according to the MDEV specification
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
Implement according to standard SQL specification 2008.
The check_constraints table is used for fetching metadata about
the constraints defined for tables in all databases.
There were some result files which failed after running mtr.
These files are updated with newly create record with mtr --record.
The error message modified.
Then the TABLE_SHARE::error_table_name() implementation taken from 10.3,
to be used as a name of the table in this message.
Implement according to standard SQL specification 2008.
The check_constraints table is used for fetching metadata about
the constraints defined for tables in all databases.
Similar to the tables SYS_FOREIGN and SYS_FOREIGN_COLS,
the tables mysql.innodb_table_stats and mysql.innodb_index_stats
are updated by the InnoDB internal SQL parser, which fails to
enforce the size limits of the data. Due to this, it is possible
for InnoDB to hang when there are persistent statistics defined on
partitioned tables where the total length of table name,
partition name and subpartition name exceeds the incorrectly
defined limit VARCHAR(64). That column should have been defined
as VARCHAR(199).
btr_node_ptr_max_size(): Interpret the VARCHAR(64) as VARCHAR(199),
to prevent a hang in the case that the upgrade script has not been
run.
dict_table_schema_check(): Ignore difference in the length of the
table_name column.
ha_innobase::max_supported_key_length(): For innodb_page_size=4k,
return a larger value so that the table mysql.innodb_index_stats
can be created. This could allow "impossible" tables to be created,
such that it is not possible to insert anything into a secondary
index when both the secondary key and the primary key are long,
but this is the easiest and most consistent way. The Oracle fix
would only ignore the maximum length violation for the two
statistics tables.
os_file_get_status_posix(), os_file_get_status_win32(): Handle
ENAMETOOLONG as well.
This patch is based on the following change in MySQL 5.7.23.
Not all changes were applied, and our variant allows persistent
statistics to work without hangs even if the table definitions
were not upgraded.
From fdbdce701ab8145ae234c9d401109dff4e4106cb Mon Sep 17 00:00:00 2001
From: Aditya A <aditya.a@oracle.com>
Date: Thu, 17 May 2018 16:11:43 +0530
Subject: [PATCH] Bug #26390736 THE FIELD TABLE_NAME (VARCHAR(64)) FROM
MYSQL.INNODB_TABLE_STATS CAN OVERFLOW.
In mysql.innodb_index_stats and mysql.innodb_table_stats
tables the table name column didn't take into consideration
partition names which can be more than varchar(64).
Problem:
The logic in store_column_type() with a switch on field type was
hard to follow. The part for MEDIUMINT (MYSQL_TYPE_INT24) was not correct.
It erroneously calculated the precision of MEDIUMINT UNSIGNED
as 7 instead of 8.
A similar hard-to-follow switch doing some type specific calculations
resided in adjust_max_effective_column_length(). It was also wrong for
MEDIUMINT (reported as a separate issue in MDEV-15946).
Solution:
1. Introducing a new class Information_schema_numeric_attributes
2. Adding a new virtual method Field::information_schema_numeric_attributes()
3. Splitting the logic in store_column_type() into virtual
implementations of information_schema_numeric_attributes().
4. In order to avoid adding duplicate code for the integer data types,
adding a new virtual method Field_int::numeric_precision(),
which returns the number of digits.
Additional changes:
1. Adding the "const" qualifier to Field::max_display_length()
2. Moving the code from adjust_max_effective_column_length()
directly to Field::max_display_length().
There was no any sense to have two implementations:
- a set of wrong virtual implementations for Field_xxx::max_display_length()
- additional code in adjust_max_effective_column_length() fixing
bad results of Field_xxx::max_display_length()
This change is safe:
- The code using Field::max_display_length()
in field.cc, sql_show.cc, sql_type.cc is not affected.
- The code in rpl_utility.cc is also not affected.
See a new DBUG_ASSSERT and new comments explaining why.
In the new reduction, Field_xxx::max_display_length() returns
correct results for all integer types (except MEDIUMINT, see below).
Putting implementations of numeric_precision() and max_display_length()
near each other in field.h made the logic much clearer and thus
helped to reveal bad results for Field_medium::max_display_length(),
which returns 9 instead of 8 for signed MEDIUMINT fields.
This problem will be addressed separately (MDEV-15946).
Note, this change is also useful for pluggable data types (see MDEV-4912),
as now a user defined Field_xxx has a way to control what's returned
in INFORMATION_SCHEMA.COLUMNS.NUMERIC_PRECISION and
INFORMATION_SCHEMA.COLUMNS.NUMERIC_SCALE by implementing
a desired behavior in Field_xxx::information_schema_numeric_attributes().
- CREATE PACKAGE [BODY] statements are now
entirely written to mysql.proc with type='PACKAGE' and type='PACKAGE BODY'.
- CREATE PACKAGE BODY now supports IF NOT EXISTS
- DROP PACKAGE BODY now supports IF EXISTS
- CREATE OR REPLACE PACKAGE [BODY] is now supported
- CREATE PACKAGE [BODY] now support the DEFINER clause:
CREATE DEFINER user@host PACKAGE pkg ... END;
CREATE DEFINER user@host PACKAGE BODY pkg ... END;
- CREATE PACKAGE [BODY] now supports SQL SECURITY and COMMENT clauses, e.g.:
CREATE PACKAGE p1 SQL SECURITY INVOKER COMMENT "comment" AS ... END;
- Package routines are now created from the package CREATE PACKAGE BODY
statement and don't produce individual records in mysql.proc.
- CREATE PACKAGE BODY now supports package-wide variables.
Package variables can be read and set inside package routines.
Package variables are stored in a separate sp_rcontext,
which is cached in THD on the first packate routine call.
- CREATE PACKAGE BODY now supports the initialization section.
- All public routines (i.e. declared in CREATE PACKAGE)
must have implementations in CREATE PACKAGE BODY
- Only public package routines are available outside of the package
- {CREATE|DROP} PACKAGE [BODY] now respects CREATE ROUTINE and ALTER ROUTINE
privileges
- "GRANT EXECUTE ON PACKAGE BODY pkg" is now supported
- SHOW CREATE PACKAGE [BODY] is now supported
- SHOW PACKAGE [BODY] STATUS is now supported
- CREATE and DROP for PACKAGE [BODY] now works for non-current databases
- mysqldump now supports packages
- "SHOW {PROCEDURE|FUNCTION) CODE pkg.routine" now works for package routines
- "SHOW PACKAGE BODY CODE pkg" now works (the package initialization section)
- A new package body level MDL was added
- Recursive calls for package procedures are now possible
- Routine forward declarations in CREATE PACKATE BODY are now supported.
- Package body variables now work as SP OUT parameters
- Package body variables now work as SELECT INTO targets
- Package body variables now support ROW, %ROWTYPE, %TYPE
- Max_index_length is supported by MyISAM and Aria tables.
- Temporary is a placeholder to signal that a table is a
temporary table. For the moment this is always "N", except
"Y" for generated information_schema tables and NULL for
views. Full temporary table support will be done in another task.
(No reason to have to update a lot of result files twice in a row)
Standard compatible behavior for UPDATE: all assignments in SET
are executed "simultaneously", not left-to-right. And `SET a=b,b=a`
will swap the values.
