FROM SHOW CREATE
Problem: The length of the internally generated foreign key name
is not checked.
Solution: The length of the internally generated foreign key name is
checked. If it is greater than the allowed limit, an error message
is reported. Also, the constraint name is printed in the same manner
as the table name, using the system charset information.
rb://1969 approved by Marko.
FROM SHOW CREATE
Problem: The length of the internally generated foreign key name
is not checked.
Solution: The length of the internally generated foreign key name is
checked. If it is greater than the allowed limit, an error message
is reported. Also, the constraint name is printed in the same manner
as the table name, using the system charset information.
rb://1969 approved by Marko.
(because it's conceptually wrong. only the user can decide whether the kill is
allowed to leave tables in the inconsistent state, storage engine has no say in that)
KILL now breaks locks inside InnoDB
Fixed possible deadlock when running INNODB STATUS
Added ha_kill_query() and kill_query() to send kill signal to all storage engines
Added reset_killed() to ensure we don't reset killed state while awake() is getting called
include/mysql/plugin.h:
Added thd_mark_as_hard_kill()
include/mysql/plugin_audit.h.pp:
Added thd_mark_as_hard_kill()
include/mysql/plugin_auth.h.pp:
Added thd_mark_as_hard_kill()
include/mysql/plugin_ftparser.h.pp:
Added thd_mark_as_hard_kill()
sql/handler.cc:
Added ha_kill_query() to send kill signal to all storage engines
sql/handler.h:
Added ha_kill_query() and kill_query() to send kill signal to all storage engines
sql/log_event.cc:
Use reset_killed()
sql/mdl.cc:
use thd->killed instead of thd_killed() to abort on soft kill
sql/sp_rcontext.cc:
Use reset_killed()
sql/sql_class.cc:
Fixed possible deadlock in INNODB STATUS by not getting thd->LOCK_thd_data if it's locked.
Use reset_killed()
Tell storge engines that KILL has been sent
sql/sql_class.h:
Added reset_killed() to ensure we don't reset killed state while awake() is getting called.
Added mark_as_hard_kill()
sql/sql_insert.cc:
Use reset_killed()
sql/sql_parse.cc:
Simplify detection of killed queries.
Use reset_killed()
sql/sql_select.cc:
Use reset_killed()
sql/sql_union.cc:
Use reset_killed()
storage/innobase/handler/ha_innodb.cc:
Added innobase_kill_query()
Fixed error reporting for interrupted queries.
storage/xtradb/handler/ha_innodb.cc:
Added innobase_kill_query()
Fixed error reporting for interrupted queries.
Problem:
During the index intersect access method, the SQL layer will access one row,
that satisfies a set of conditions, using an index i1. And then it will try to
access the same row, with other set of conditions using the next index i2. If
the fetch from i2 fails (we are talking about an error situation here and not
simply an unmatched row situation), then it will unlock the row accessed via
i1. This will work in all situations except deadlock error.
When a deadlock happens, InnoDB will rollback the transaction. InnoDB intimates
the SQL layer about this through the THD::transaction_rollback_request member.
But this is not currently used by the SQL layer.
Solution:
When an error happens, the SQL layer must check the
THD::transaction_rollback_request member, before calling handler::unlock_row().
We have also added a debug assert in ha_innobase::unlock_row() checking that
it must be called only when the transaction is in active state.
rb#1773 approved by Marko and Sunny.
Problem:
During the index intersect access method, the SQL layer will access one row,
that satisfies a set of conditions, using an index i1. And then it will try to
access the same row, with other set of conditions using the next index i2. If
the fetch from i2 fails (we are talking about an error situation here and not
simply an unmatched row situation), then it will unlock the row accessed via
i1. This will work in all situations except deadlock error.
When a deadlock happens, InnoDB will rollback the transaction. InnoDB intimates
the SQL layer about this through the THD::transaction_rollback_request member.
But this is not currently used by the SQL layer.
Solution:
When an error happens, the SQL layer must check the
THD::transaction_rollback_request member, before calling handler::unlock_row().
We have also added a debug assert in ha_innobase::unlock_row() checking that
it must be called only when the transaction is in active state.
rb#1773 approved by Marko and Sunny.
Make the commit checkpoint inside InnoDB be asynchroneous.
Implement a background thread in binlog to do the writing and flushing of
binlog checkpoint events to disk.
btr_lift_page_up() writes wrong page number (different by -1) for upper than father page.
But in almost all of the cases, the father page should be root page, no upper
pages. It is very rare path.
In addition the leaf page should not be lifted unless the father page is root.
Because the branch pages should not become the leaf pages.
rb://1336 approved by Marko Makela.
btr_lift_page_up() writes wrong page number (different by -1) for upper than father page.
But in almost all of the cases, the father page should be root page, no upper
pages. It is very rare path.
In addition the leaf page should not be lifted unless the father page is root.
Because the branch pages should not become the leaf pages.
rb://1336 approved by Marko Makela.
btr_lift_page_up() writes wrong page number (different by -1) for upper than father page.
But in almost all of the cases, the father page should be root page, no upper
pages. It is very rare path.
In addition the leaf page should not be lifted unless the father page is root.
Because the branch pages should not become the leaf pages.
rb://1336 approved by Marko Makela.
btr_lift_page_up() writes wrong page number (different by -1) for upper than father page.
But in almost all of the cases, the father page should be root page, no upper
pages. It is very rare path.
In addition the leaf page should not be lifted unless the father page is root.
Because the branch pages should not become the leaf pages.
rb://1336 approved by Marko Makela.
Generalized support for auto-updated and/or auto-initialized timestamp
and datetime columns. This patch is a reimplementation of MySQL's
"WL#5874: CURRENT_TIMESTAMP as DEFAULT for DATETIME columns". In order to
ease future merges, this implementation reused few function and variable
names from MySQL's patch, however the implementation is quite different.
TODO:
The only unresolved problem in this patch is the semantics of LOAD DATA for
TIMESTAMP and DATETIME columns in the cases when there are missing or NULL
columns. I couldn't fully comprehend the logic behind MySQL's behavior and
its relationship with their own documentation, so I left the results to be
more consistent with all other LOAD cases.
The problematic test cases can be seen by running the test file function_defaults,
and observing the test case differences. Those were left on purpose for discussion.
CONSISTENT SNAPSHOT OPTION
A transaction is started with a consistent snapshot. After
the transaction is started new indexes are added to the
table. Now when we issue an update statement, the optimizer
chooses an index. When the index scan is being initialized
via ha_innobase::change_active_index(), InnoDB reports
the error code HA_ERR_TABLE_DEF_CHANGED, with message
stating that "insufficient history for index".
This error message is propagated up to the SQL layer. But
the my_error() api is never called. The statement level
diagnostics area is not updated with the correct error
status (it remains in Diagnostics_area::DA_EMPTY).
Hence the following check in the Protocol::end_statement()
fails.
516 case Diagnostics_area::DA_EMPTY:
517 default:
518 DBUG_ASSERT(0);
519 error= send_ok(thd->server_status, 0, 0, 0, NULL);
520 break;
The fix is to backport the fix of bugs 14365043, 11761652
and 11746399.
14365043 PROTOCOL::END_STATEMENT(): ASSERTION `0' FAILED
11761652 HA_RND_INIT() RESULT CODE NOT CHECKED
11746399 RETURN VALUES OF HA_INDEX_INIT() AND INDEX_INIT() IGNORED
rb://1227 approved by guilhem and mattiasj.
CONSISTENT SNAPSHOT OPTION
A transaction is started with a consistent snapshot. After
the transaction is started new indexes are added to the
table. Now when we issue an update statement, the optimizer
chooses an index. When the index scan is being initialized
via ha_innobase::change_active_index(), InnoDB reports
the error code HA_ERR_TABLE_DEF_CHANGED, with message
stating that "insufficient history for index".
This error message is propagated up to the SQL layer. But
the my_error() api is never called. The statement level
diagnostics area is not updated with the correct error
status (it remains in Diagnostics_area::DA_EMPTY).
Hence the following check in the Protocol::end_statement()
fails.
516 case Diagnostics_area::DA_EMPTY:
517 default:
518 DBUG_ASSERT(0);
519 error= send_ok(thd->server_status, 0, 0, 0, NULL);
520 break;
The fix is to backport the fix of bugs 14365043, 11761652
and 11746399.
14365043 PROTOCOL::END_STATEMENT(): ASSERTION `0' FAILED
11761652 HA_RND_INIT() RESULT CODE NOT CHECKED
11746399 RETURN VALUES OF HA_INDEX_INIT() AND INDEX_INIT() IGNORED
rb://1227 approved by guilhem and mattiasj.
