------------------------------------------------------------
revno: 2617.31.21
revision-id: davi.arnaut@sun.com-20090402193933-2zbhg15kd0z3xh8r
parent: alik@sun.com-20090402081500-78l1hpkx03twe4bf
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41971-6.0
timestamp: Thu 2009-04-02 16:39:33 -0300
message:
Bug#41971: Thread state on embedded server is always "Writing to net"
The problem is that the state of a thread on a embedded server is
always displayed as "Writing to net", which is wrong as there is
no "network" in the embedded server.
The solution is only exclude, on a embedded server, the thread
state conditions that are related to network operations. Other
thread states related to waiting on conditions or other operations
are preserved.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
The flag EXTRA_ACL is used in conjugation with our access checks, yet it is
not clear what impact this flag has.
This is a code clean up which replaces use of EXTRA_ACL with an explicit
function parameter.
The patch also fixes privilege checks for:
- SHOW CREATE TABLE: The new privilege requirement is any privilege on
the table-level.
- CHECKSUM TABLE: Requires SELECT on the table level.
- SHOW CREATE VIEW: Requires SHOW_VIEW and SELECT on the table level
(just as the manual claims)
- SHOW INDEX: Requires any privilege on any column combination.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
----------------------------------------------------------
revno: 2630.22.8
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Sun 2008-08-10 18:49:52 +0400
message:
Get rid of typedef struct for the most commonly used types:
TABLE, TABLE_SHARE, LEX. This simplifies use of tags
and forward declarations.
Original revision in 6.0:
------------------------------------------------------------
revno: 2630.13.11
committer: Alexander Nozdrin <alik@mysql.com>
branch nick: 6.0-rt-wl4300
timestamp: Thu 2008-07-24 11:44:21 +0400
message:
A patch for WL#4300: Define privileges for tablespaces.
------------------------------------------------------------
per-file messages:
mysql-test/r/grant.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/r/ps.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/r/system_mysql_db.result
Update result file: new columm 'Create_tablespace_priv' has been added to mysql.user.
mysql-test/suite/falcon/r/falcon_tablespace_priv.result
Test case for WL#4300.
mysql-test/suite/falcon/t/falcon_tablespace_priv.test
Test case for WL#4300.
mysql-test/suite/ndb/r/ndb_dd_ddl.result
Test case for WL#4300.
mysql-test/suite/ndb/t/ndb_dd_ddl.test
Test case for WL#4300.
scripts/mysql_system_tables.sql
New columm 'Create_tablespace_priv' has been added to mysql.user.
scripts/mysql_system_tables_data.sql
'CREATE TABLESPACE' is granted by default to the root user.
scripts/mysql_system_tables_fix.sql
Grant 'CREATE TABLESPACE' privilege during system table upgrade
if a user had SUPER privilege.
sql/sql_acl.cc
Added CREATE TABLESPACE privilege.
sql/sql_acl.h
Added CREATE TABLESPACE privilege.
sql/sql_parse.cc
Check global 'CREATE TABLESPACE' privilege for the following SQL statements:
- CREATE | ALTER | DROP TABLESPACE
- CREATE | ALTER | DROP LOGFILE GROUP
sql/sql_show.cc
Added CREATE TABLESPACE privilege.
sql/sql_yacc.yy
Added CREATE TABLESPACE privilege.
strict SQL mode
The problem was that a COMMENT longer than 64 characters
caused CREATE PROCEDURE to fail.
This patch fixed the problem by changing the COMMENT field in
mysql.proc from char(64) to text. The corresponding ROUTINE_COMMENT
field in INFORMATION_SCHEMA.ROUTINES is also changed from
varchar(64) to longtext.
mysql_system_tables.sql and mysql_system_tables_fix.sql updated.
Test case added to sp.test and affected result-files updated.
lowercasing table name".
In lower_case_table_names > 0 mode some queries to I_S left entries
with incorrect key in table definition cache. This wasted memory and
caused some of the further queries to I_S to produce stale results
in cases when table definition was changed by a DDL statement.
Also in combination with similar problem in CREATE TABLE (which also
has peeked into table definition cache using non-normalized key) this
issue led to to spurious ER_TABLE_EXISTS_ERROR errors when one tried
to create a table with the same name as a previously existing but
dropped table (assuming that table name contained characters in upper
case).
This problem occured due to fact that fill_schema_table_from_frm()
was not properly normalizing (lowercasing) database and table names
which it used for lookups in table definition cache.
This fix adds proper normalization to this function. It also solves
similar problem in CREATE TABLE's code by ensuring that it uses
properly normalized version of table name when it peeks into table
definition cache instead of non-normalized one.
view definition
During SHOW CREATE VIEW there is no reason to 'anonymize'
errors that name objects that a user does not have access
to. Moreover it was inconsistently implemented. For example
base tables being referenced from a view appear to be ok,
but not views. The manual on the other hand is clear: If a
user has the privileges SELECT and SHOW VIEW, the view
definition is available to that user, period. The fix
changes the behavior to support the manual.
on SHOW CREATE TRIGGER + MERGE table
Problem: SHOW CREATE TRIGGER erroneously relies on fact
that we have the only underlying table for a trigger
(wrong for merge tables).
Fix: remove erroneous assert().
those keywords do nothing in 5.1 (they are meant for future versions, for example featuring the Maria engine)
so they are here removed from the syntax. Adding those keywords to future versions when needed is:
- WL#5034 "Add TRANSACTIONA=0|1 and PAGE_CHECKSUM=0|1 clauses to CREATE TABLE"
- WL#5037 "New ROW_FORMAT value for CREATE TABLE: PAGE"
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
"create as select" (innodb table)
Problem: code constructing "CREATE TABLE..." statement
doesn't take into account that current database is not set
in some cases. That may lead to a server crash.
Fix: check if current database is set.
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
the thread->mysys_var parameter should be empty for the idle
embedded-server threads so that working threads can safely free
this memory.
per-file comments:
libmysqld/lib_sql.cc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
set thread->mysys_var= 0 after the query is handled
mysql-test/include/concurrent.inc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
enable these for the embedded-server mode
sql/sql_show.cc
Bug#43733 Select on processlist let the embedded server crash (concurrent_innodb_safelog)
show thread lock status in the query result
