subquery returning multiple rows
Error handling was missing when handling subqueires in WHERE
and when assigning a SELECT result to a @variable.
This caused crash(es).
Fixed by adding error handling code to both the WHERE
condition evaluation and to assignment to an @variable.
Bug#46539 Various crashes on INSERT IGNORE SELECT + SELECT FOR UPDATE.
If a transaction was rolled back inside InnoDB due to a deadlock
or lock wait timeout, and the statement had IGNORE clause,
the server could crash at the end of the statement or on shutdown.
This was caused by the error handling infrastructure's attempt to
ignore a non-ignorable error.
When a transaction rollback request is raised, switch off
current_select->no_error flag, so that the following error
won't be ignored.
Instead, we could add !thd->is_fatal_sub_stmt_error to
my_message_sql(), but since in write_record() we switch
off no_error, the same approach is used in
thd_mark_transaction_to_rollback().
@todo: call thd_mark_transaction_to_rollback() from
handler::print_error(), then we can easily make sure
that the error reported by print_error is not ignored.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
to 5.1 partially. This patch brings what was left to mysql-next-mr.
Original revisions in 6.0:
------------------------------------------------------------
revno: 2617.31.26
committer: Alexander Nozdrin <alik@sun.com>
branch nick: 6.0-rt-bug43138.3
timestamp: Thu 2009-04-30 19:31:30 +0400
message:
Fix for Bug#43138: DROP DATABASE failure does not clean up message list.
The problem was that the high-level function mysql_rm_db() invoked
low-level mysql_rm_table_part2(), which reported low-level error
(Unknown table) if SE refused to delete a table. Also when
mysql_rm_table_part2() reported an error, it didn't add corresponding
warning into the list (because it is used from other places where such
behaviour is required).
The fix is to
1. Remove no_warnings_for_error usage from sql_table.cc
2. Improve internal error handler support in THD, so that
a stack of error handlers is allowed.
3. Create an internal error handler (Drop_table_error_handler)
to silence useless warnings.
4. Use the handler in DROP DATABASE and DROP TABLE statements.
------------------------------------------------------------
revno: 2617.69.38
committer: Alexander Nozdrin <alik@sun.com>
branch nick: mysql-next-bugfixing-bug37431
timestamp: Mon 2009-08-24 21:52:09 +0400
message:
A test case for Bug#37431 (DROP TABLE does not report errors correctly).
------------------------------------------------------------
revno: 2617.31.29
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Fri 2009-05-01 17:37:34 +0400
message:
Follow-up for fix for bug "Bug#43138: DROP DATABASE failure
does not clean up message list".
Fixed drop.test failure under non-debug server by moving part
of test dependent on debug-only feature to separate .test file,
which won't be run for non-debug versions of server.
------------------------------------------------------------
revno: 2617.45.17
committer: Sergei Golubchik <serg@mysql.com>
branch nick: 6.0-maria
timestamp: Wed 2009-05-13 20:08:58 +0200
message:
followup for bug#43138
if delete fails with a permission denied error, we want to show it
------------------------------------------------------------
The patch was backported to 5.1 in scope of Bug#42364 by
the following revision:
------------------------------------------------------------
revno: 2497.975.3
committer: Sergey Glukhov <Sergey.Glukhov@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Fri 2009-07-03 13:22:06 +0500
message:
Bug#42364 SHOW ERRORS returns empty resultset after dropping non existent table
enabled message storing into error message list
for 'drop table' command
------------------------------------------------------------
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
local storage for query cache).
We need more than one pointer in a thread to
represent the query cache and net->query_cache_query can not be used
any more (due to ABI compatibility issues and to different life
time of NET and THD).
This is a backport of the following patch from 6.0:
----------------------------------------------------------
revno: 2476.1157.2
committer: kostja@bodhi.(none)
timestamp: Sat 2007-06-16 13:29:24 +0400
case than in corr index".
Server was unable to find existing or explicitly created supporting
index for foreign key if corresponding statement clause used field
names in case different than one used in key specification and created
yet another supporting index.
In cases when name of constraint (and thus name of generated index)
was the same as name of existing/explicitly created index this led
to duplicate key name error.
The problem was that unlike all other code Key_part_spec::operator==()
compared field names in case sensitive fashion. As result routines
responsible for getting rid of redundant generated supporting indexes
for foreign key were not working properly for versions of field names
using different cases.
storing and restoring information about foreign keys in the .FRM files and
properly displaying it in SHOW CREATE TABLE output and I_S tables.
The idea of this patch is to change type of Key_part_spec::field_name and
Key::name to LEX_STRING in order to avoid extra strlen() calls during
semantic analysis and statement execution, particularly, in code to be
implemented on the 2nd milestone of WL#148.
Note that since we are not using LEX_STRING everywhere yet (e.g. in
Create_field and KEY) and we want to limit scope of our changes we
have to do strlen() in places where we create Key and Key_part_spec
instances from objects using plain (char*) for strings. These calls
will go away during the process of further (char*) -> LEX_STRING
refactoring.
We have introduced these changes in 6.0 and backported them to 5.5
tree to make people aware of these changes as early as possible and
to simplify merges with mysql-fk and mysql-6.1-fk trees.
No test case is needed since this patch does not introduce any
user visible changes.
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
NOTE: Backporting the patch to next-mr.
WL#4828 Augment DBUG_ENTER/DBUG_EXIT to crash MySQL in different functions
-------
The assessment of the replication code in the presence of faults is extremely
import to increase reliability. In particular, one needs to know if servers
will either correctly recovery or print out appropriate error messages thus
avoiding unexpected problems in a production environment.
In order to accomplish this, the current patch refactories the debug macros
already provided in the source code and introduces three new macros that
allows to inject faults, specifically crashes, while entering or exiting a
function or method. For instance, to crash a server while returning from
the init_slave function (see module sql/slave.cc), one needs to do what
follows:
1 - Modify the source replacing DBUG_RETURN by DBUG_CRASH_RETURN;
DBUG_CRASH_RETURN(0);
2 - Use the debug variable to activate dbug instructions:
SET SESSION debug="+d,init_slave_crash_return";
The new macros are briefly described below:
DBUG_CRASH_ENTER (function) is equivalent to DBUG_ENTER which registers the
beginning of a function but in addition to it allows for crashing the server
while entering the function if the appropriate dbug instruction is activate.
In this case, the dbug instruction should be "+d,function_crash_enter".
DBUG_CRASH_RETURN (value) is equivalent to DBUG_RETURN which notifies the
end of a function but in addition to it allows for crashing the server
while returning from the function if the appropriate dbug instruction is
activate. In this case, the dbug instruction should be
"+d,function_crash_return". Note that "function" should be the same string
used by either the DBUG_ENTER or DBUG_CRASH_ENTER.
DBUG_CRASH_VOID_RETURN (value) is equivalent to DBUG_VOID_RETURN which
notifies the end of a function but in addition to it allows for crashing
the server while returning from the function if the appropriate dbug
instruction is activate. In this case, the dbug instruction should be
"+d,function_crash_return". Note that "function" should be the same string
used by either the DBUG_ENTER or DBUG_CRASH_ENTER.
To inject other faults, for instance, wrong return values, one should rely
on the macros already available. The current patch also removes a set of
macros that were either not being used or were redundant as other macros
could be used to provide the same feature. In the future, we also consider
dynamic instrumentation of the code.
BUG#45747 DBUG_CRASH_* is not setting the strict option
---------
When combining DBUG_CRASH_* with "--debug=d:t:i:A,file" the server crashes
due to a call to the abort function in the DBUG_CRASH_* macro althought the
appropriate keyword has not been set.
binlog-db-db / binlog-ignore-db
InnoDB will return an error if statement based replication is used
along with transaction isolation level READ-COMMITTED (or weaker),
even if the statement in question is filtered out according to the
binlog-do-db rules set. In this case, an error should not be printed.
This patch addresses this issue by extending the existing check in
external_lock to take into account the filter rules before deciding to
print an error. Furthermore, it also changes decide_logging_format to
take into consideration whether the statement is filtered out from
binlog before decision is made.
when used with --tab
1) New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE).
mysqldump is updated to use this in --tab mode.
2) ESCAPED BY/ENCLOSED BY field parameters are documented as
accepting CHAR argument, however SELECT .. INTO OUTFILE
silently ignored rests of multisymbol arguments.
For the symmetrical behavior with LOAD DATA INFILE the
server has been modified to fail with the same error:
ERROR 42000: Field separator argument is not what is
expected; check the manual
3) Current LOAD DATA INFILE recognizes field/line separators
"as is" without converting from client charset to data
file charset. So, it is supposed, that input file of
LOAD DATA INFILE consists of data in one charset and
separators in other charset. For the compatibility with
that [buggy] behaviour SELECT INTO OUTFILE implementation
has been saved "as is" too, but the new warning message
has been added:
Non-ASCII separator arguments are not fully supported
This message warns on field/line separators that contain
non-ASCII symbols.
If using statement based replication (SBR), repeatedly calling
statements which are unsafe for SBR will cause a warning message
to be written to the error for each statement. This might lead
to filling up the error log and there is no way to disable this
behavior.
The solution is to only log these message (about statements unsafe
for statement based replication) if the log_warnings option is set.
For example:
SET GLOBAL LOG_WARNINGS = 0;
INSERT INTO t1 VALUES(UUID());
SET GLOBAL LOG_WARNINGS = 1;
INSERT INTO t1 VALUES(UUID());
In this case the message will be printed only once:
[Warning] Statement may not be safe to log in statement format.
Statement: INSERT INTO t1 VALUES(UUID())
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
format." warnings
Despite the fact that a statement would be filtered out from binlog, a
warning would still be thrown if it was issued with the LIMIT.
This patch addresses this issue by checking the filtering rules before
printing out the warning.
such as quit and shutdown
Logging to slow log can produce an undetermined value for
Rows_examined in special cases. In debug mode this manifests
itself as any of the various marker values used to mark
uninitialized memory on various platforms.
If logging happens on a THD object that hasn't performed any
row reads (on this or any previous connections), the
THD::examined_row_count may be uninitialized. This patch adds
initialization for this attribute.
No automated test cases are added, as for this to be
meaningful, we need to ensure that we're using a THD
fulfilling the above conditions. This is hard to do in the
mysql-test-run framework. The patch has been verified
manually, however, by restarting mysqld and running the test
included with the bug report.
variable. The problem was that THD::connect_utime could be
used without being initialized when the main thread is used
to handle connections (--thread-handling=no-threads).
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
MySQL crashes if a user without proper privileges attempts to create a procedure.
The crash happens because more than one error state is pushed onto the Diagnostic
area. In this particular case the user is denied to implicitly create a new user
account with the implicitly granted privileges ALTER- and EXECUTE ROUTINE.
The new account is needed if the original user account contained a host mask.
A user account with a host mask is a distinct user account in this context.
An alternative would be to first get the most permissive user account which
include the current user connection and then assign privileges to that
account. This behavior change is considered out of scope for this bug patch.
The implicit assignment of privileges when a user creates a stored routine is a
considered to be a feature for user convenience and as such it is not
a critical operation. Any failure to complete this operation is thus considered
non-fatal (an error becomes a warning).
The patch back ports a stack implementation of the internal error handler interface.
This enables the use of multiple error handlers so that it is possible to intercept
and cancel errors thrown by lower layers. This is needed as a error handler already
is used in the call stack emitting the errors which needs to be converted.
Problem: storing "SELECT ... INTO @var ..." results in variables we used val_xxx()
methods which returned results of the current row.
So, in some cases (e.g. SELECT DISTINCT, GROUP BY or HAVING) we got data
from the first row of a new group (where we evaluate a clause) instead of
data from the last row of the previous group.
Fix: use val_xxx_result() counterparts to get proper results.
Mysql server crashes because unsafe statements warning is wrongly elevated to error,
which is set the error status of Diagnostics_area of the thread in THD::binlog_query().
Yet the caller believes that binary logging shouldn't touch the status, so it will
set the status also later by my_ok(), my_error() or my_message() seperately
according to the execution result of the statement or transaction.
But the status of Diagnostics_area of the thread is allowed to set only once.
Fixed to clear the error wrongly set by binary logging, but keep the warning message.
