SHUTDOWN IS IN PROGRESS
PROBLEM
-------
In the background thread srv_master_thread() we have a
a one second delay loop which will continuously monitor
server activity .If the server is inactive (with out any
user activity) or in a shutdown state we do some background
activity like flushing the changes.In the current code
we are not checking if server is in shutdown state before
sleeping for one second.
FIX
---
If server is in shutdown state ,then dont go to one second
sleep.
PARTITIONS.
ANALYSIS
--------
Whenever we query I_S.partitions,
ha_partition::get_dynamic_partition_info()
is called which resets the cardinality
according to the number of rows in last
partition.
Fix
---
When we call get_dynamic_partition_info()
avoid passing the flag HA_STATUS_CONST
to info() since HA_STATUS_CONST should
ideally not be called for per partition.
[Approved by mattiasj rb#2830 ]
IN TIME RECOVERY FAILURE ON SLAVES
Problem:
DROP TEMP TABLE IF EXISTS commands can cause point
in time recovery (re-applying binlog) failures.
Analyses:
In RBR, 'DROP TEMPORARY TABLE' commands are
always binlogged by adding 'IF EXISTS' clauses.
Also, the slave SQL thread will not check replicate.* filter
rules for "DROP TEMPORARY TABLE IF EXISTS" queries.
If log-slave-updates is enabled on slave, these queries
will be binlogged in the format of "USE `db`;
DROP TEMPORARY TABLE IF EXISTS `t1`;" irrespective
of filtering rules and irrespective of the `db` existence.
When users try to recover slave from it's own binlog,
use `db` command might fail if `db` is not present on slave.
Fix:
At the time of writing the 'DROP TEMPORARY TABLE
IF EXISTS' query into the binlog, 'use `db`' will not be
present and the table name in the query will be a fully
qualified table name.
Eg:
'USE `db`; DROP TEMPORARY TABLE IF EXISTS `t1`;'
will be logged as
'DROP TEMPORARY TABLE IF EXISTS `db`.`t1`;'.
Problem:
When the user specified foreign key name contains "_ibfk_", InnoDB wrongly
tries to rename it.
Solution:
When a table is renamed, all its associated foreign keys will also be renamed,
only if the foreign key names are automatically generated. If the foreign key
names are given by the user, even if it has _ibfk_ in it, it must not be
renamed.
rb#2935 approved by Jimmy, Krunal and Satya
Inside a loop in a stored procedure, we create a partitioned
table. The CREATE statement is thus treated as a prepared statement:
it is prepared once, and then executed by each iteration. Thus its Lex
is reused many times. This Lex contains a part_info member, which
describes how the partitions should be laid out, including the
partitioning function. Each execution of the CREATE does this, in
open_table_from_share ():
tmp= mysql_unpack_partition(thd, share->partition_info_str,
share->partition_info_str_len,
outparam, is_create_table,
share->default_part_db_type,
&work_part_info_used);
...
tmp= fix_partition_func(thd, outparam, is_create_table);
The first line calls init_lex_with_single_table() which creates
a TABLE_LIST, necessary for the "field fixing" which will be
done by the second line; this is how it is created:
if ((!(table_ident= new Table_ident(thd,
table->s->db,
table->s->table_name, TRUE))) ||
(!(table_list= select_lex->add_table_to_list(thd,
table_ident,
NULL,
0))))
return TRUE;
it is allocated in the execution memory root.
Then the partitioning function ("id", stored in Lex -> part_info)
is fixed, which calls Item_ident:: fix_fields (), which resolves
"id" to the table_list above, and stores in the item's
cached_table a pointer to this table_list.
The table is created, later it is dropped by another statement,
then we execute again the prepared CREATE. This reuses the Lex,
thus also its part_info, thus also the item representing the
partitioning function (part_info is cloned but it's a shallow
cloning); CREATE wants to fix the item again (which is
normal, every execution fixes items again), fix_fields ()
sees that the cached_table pointer is set and picks up the
pointed table_list. But this last object does not exist
anymore (it was allocated in the execution memory root of
the previous execution, so it has been freed), so we access
invalid memory.
The solution: when creating the table_list, mark that it
cannot be cached.
Since log_throttle is not available in 5.5. Logging of
error message for failure of thread to create new connection
in "create_thread_to_handle_connection" is not backported.
Since, function "my_plugin_log_message" is not available in
5.5 version and since there is incompatibility between
sql_print_XXX function compiled with g++ and alog files with
gcc to use sql_print_error, changes related to audit log
plugin is not backported.
Problem:
sys_vars.rpl_init_slave_func test was failing sporadically
on 5.5+.
Fix:
Added assert condition after wait for checks.
Recorded test and enabled it.
BUG#12535301- SYS_VARS.RPL_INIT_SLAVE_FUNC MISMATCHES IN DAILY-5.5
Problem:
sys_vars.rpl_init_slave_func test was not recorded after
the last edit. It was disabled on 5.1 after seeing failures
due to the above reason.
No old failures as this suite never ran with pb2 on 5.1
Fix:
Added assert condition after wait for checks.
Recorded test and enabled it.
TO DUMP DATA FROM MYSQL-5.6
Analysis
--------
Dumping mysql-5.6 data using mysql-5.1/mysql-5.5 'myqldump'
utility fails with a syntax error.
Server system variable 'sql_quote_show_create' which quotes the
identifiers is set in the mysqldump utility. The mysldump utility
of mysql-5.1/mysql-5.5 uses deprecated syntax 'SET OPTION' to set
the 'sql_quote_show_create' option. The support for the syntax is
removed in mysql-5.6. Hence syntax error is reported while taking
the dump.
Fix:
---
Changed the 'mysqldump' code to use the syntax
'SET SQL_QUOTE_SHOW_CREATE' to set the 'sql_quote_show_create'
option. That syntax is supported on mysql-5.1, mysql-5.5 and
mysql-5.6.
NOTE: I have not added an mtr test case since it is difficult
to simulate the condition. Also the syntax may not be further
simplified in the future.
SERIALIZABLE
Problem:
The documentation claims that WITH CONSISTENT SNAPSHOT will work for both
REPEATABLE READ and SERIALIZABLE isolation levels. But it will work only
for REPEATABLE READ isolation level. Also, the clause WITH CONSISTENT
SNAPSHOT is silently ignored when it is not applicable to the given isolation
level.
Solution:
Generate a warning when the clause WITH CONSISTENT SNAPSHOT is ignored.
rb#2797 approved by Kevin.
Note: Support team wanted to push this to 5.5+.
MULTI-FILE TABLESPACE
ANALYSIS
--------
When a tablespace has multiple data files, InnoDB fails to
open the tablespace. This is because for each ibd file,
the first page is checked.But the first page of all ibd file
need not be the first page of the tablespace. Only the first
page of the tablespace contains the tablespace header. When
we check the first page of an ibd file that is not the first
page of the tablespace, then the "tablespace flags" is not
really available.This was wrongly used to check if a page is
corrupt or not.
FIX
---
Use the tablespace flags only if the page number is 0
in a tablespace.
[Approved by Inaam rb#2836 ]
WITH UTF8_UNICODE_CI COLLATION
Problem Description:
When comparing datetime values with strings, the utf8_unicode_ci collation
prevents correct comparisons. Consider the below set of queries, it is not
showing any results on a table which has tuples that satisfies the query.
But for collation utf8_general_ci it shows one tuple.
set names utf8 collate utf8_unicode_ci;;
select * from lang where dt='1979-12-09';
Analysis:
The comparison function is not chosen in case of collation utf8_unicode_ci.
In agg_item_set_converter() because the collation state is having
"MY_CS_NONASCII" for collation type "utf8_unicode_ci". The conversion
of the collation is happening for the date field. And because of that
it is unable to pickup proper compare function(i.e CMP_DATE_WITH_STR).
Actually the bug is accidentally introduced by the WL#3759 in 5.5.
And in 5.6 it is been fixed by the WL#3664.
Fix:
I have backported the changes from the file strings/ctype-uca.c which
are related to "utf8" introduced by the WL#3664.
This change helps in choosing the correct comparison function for all
the collations of utf8 charset.
ALTER TABLE ... ALGORITHM= ... STATEMENT
The problem was an intermediate buffer of smaller size,
which truncated the alter statement.
Solved by providing the size of the buffer to be allocated through
the function call, instead of using an one-size-fits-all stack buffer
inside the function.
Bug16785036 - RPM REQUIRES: MISSING PACKAGES ON RHEL 6 (AND PROBABLY 5)
Bug 16878042 - CANNOT KEEP SEVERAL MAJOR VERSIONS OF MYSQL IN THE SAME YUM REPOSITORY
Problem:
The problem is that explain_filename-t is not printing a test plan as
required by the TAP protocol. The test invokes plan(NO_PLAN) but does not
invoke exit_status() at the end, where the plan would be printed.
Solution:
Invoke exit_status() at the end.
LOAD DATA CAN CAUSE SQL INJECTION
Problem:
=======
A long SET expression in LOAD DATA is incorrectly truncated
when written to the binary log.
Analysis:
========
LOAD DATA statements are reconstructed once again before
they are written to the binary log. When SET clauses are
specified as part of LOAD DATA statement, these SET clause
user command strings need to be stored as it is inorder to
reconstruct the original user command. At present these
strings are stored as part of SET clause item tree's
top most Item node's name itself which is incorrect. As an
Item::name can be of MAX_ALIAS_NAME (256) size. Hence the
name will get truncated to "255".
Because of this the rewritten LOAD DATA statement will be
terminated incorrectly. When this statment is read back by
the mysqlbinlog tool it reads a starting single quote and
continuos to read till it finds an ending quote. Hence any
statement written post ending quote will be considered as
a new statement.
Fix:
===
As name field has length restriction the string value
should not be stored in Item::name. A new String list is
maintained to store the SET expression values and this list
is read during reconstrution.
sql/sql_lex.cc:
Clear the load data set string list during each query
execution.
sql/sql_lex.h:
Added a new String list to store the load data operation's
SET clause user command strings.
sql/sql_load.cc:
Read the SET clause user command strings from load data
set string list.
sql/sql_yacc.yy:
Store the SET caluse user command string as part of load
data set string list.
Sys_var_keycache inherits from some variant of Sys_var_integer
Instances of Sys_var_keycache are initialized using the KEYCACHE_VAR macro,
which takes an offset within st_key_cache.
However, the Sys_var_integer CTOR treats the offset as if it was within
global_system_variables (hidden within some layers of macros and fuction
pointers)
The result is that we write arbitrary data to arbitrary locations in memory.
This all happens during static initialization of global objects,
i.e. before we have even entered the main() function.
Bug#12325449 TYPO IN CMAKE/DTRACE.CMAKE
Fix typo in dtrace.cmake
Analysis
--------
The pthread_mutex commit_threads_m was initiliazed but never
used.
Fix
---
Removing the commit_threads_m mutex from the code base.
[ Approved by Marko rb#2475]
DDL AND I_S QUERIES
Skip partially created indexes (ones whose name starts with TEMP_INDEX_PREFIX)
from stats gathering.
Because InnoDB reports HA_INPLACE_ADD_INDEX_NO_WRITE to MySQL, the latter
allows parallel execution of ha_innobase::add_index() and ha_innobase::info().
Reviewed by: Inaam (rb:2613)
IF IT HAS A WRONG COUNT
If CHECK TABLE finds that a secondary index contains the wrong
number of entries, it used to report an error but not mark the
index as corrupt. The error means that the index should be rebuilt,
which can be done with ALTER TABLE DROP INDEX and ALTER TABLE ADD
INDEX. But just in case the DBA does not pay any attention to the
output of CHECK TABLE, the secondary index should be marked as
corrupted so that it is not used again.
Approved by Inaam in RB:2607
