result
Row subqueries producing no rows were not handled as UNKNOWN
values in row comparison expressions.
That was a result of the following two problems:
1. Item_singlerow_subselect did not mark the resulting row
value as NULL/UNKNOWN when no rows were produced.
2. Arg_comparator::compare_row() did not take into account that
a whole argument may be NULL rather than just individual scalar
values.
Before bug#34384 was fixed, the above problems were hidden
because an uninitialized (i.e. without any stored value) cached
object would appear as NULL for scalar values in a row subquery
returning an empty result. After the fix
Arg_comparator::compare_row() would try to evaluate
uninitialized cached objects.
Fixed by removing the aforementioned problems.
mysql-test/r/row.result:
Added a test case for bug #54190.
mysql-test/r/subselect.result:
Updated the result for a test relying on wrong behavior.
mysql-test/t/row.test:
Added a test case for bug #54190.
sql/item_cmpfunc.cc:
If either of the argument rows is NULL, return NULL as the
result of comparison.
sql/item_subselect.cc:
Adjust null_value for Item_singlerow_subselect depending on
whether a row has been produced by the row subquery.
The EXISTS transformation has additional switches to catch the known corner
cases that appear when transforming an IN predicate into EXISTS. Guarded
conditions are used which are deactivated when a NULL value is seen in the
outer expression's row. When the inner query block supplies NULL values,
however, they are filtered out because no distinction is made between the
guarded conditions; guarded NOT x IS NULL conditions in the HAVING clause that
filter out NULL values cannot be de-activated in isolation from those that
match values or from the outer expression or NULL's.
The above problem is handled by making the guarded conditions remember whether
they have rejected a NULL value or not, and index access methods are taking
this into account as well.
The bug consisted of
1) Not resetting the property for every nested loop iteration on the inner
query's result.
2) Not propagating the NULL result properly from inner query to IN optimizer.
3) A hack that may or may not have been needed at some point. According to a
comment it was aimed to fix#2 by returning NULL when FALSE was actually
the result. This caused failures when #2 was properly fixed. The hack is
now removed.
The fix resolves all three points.
Fixed a crash in Item_equal::fix_length_and_dec that was a result of the
architecture of the MWL#89 subquery optimization.
The injection of IN->EXISTS predicates for subqueries happened inside
make_join_statistics, after constant substitution, but before multiple
equality substitution done by substitute_for_best_equal_field. As a
result, when we called fix_fields for the WHERE clause after the injection
of IN->EXISTS predicates, Item_equal was not fixed, and it was in a state
not anticipated by Item_equal::fix_length_and_dec - the Item_equal
containted only a constant, and no fields at all.
The fix takes into account this new possible state when calling fix_fields.
file .\dtoa.c
The assertion failure was correct because the 'width' argument
of my_gcvt() has the signed integer type, whereas the unsigned
value UINT_MAX32 was being passed by the caller
(Field_double::val_str()) leading to a negative width in
my_gcvt().
The following chain of problems was found by further analysis:
1. The display width for a floating point number is calculated
in Field_double::val_str() as either field_length or the
maximum possible length of string representation of a floating
point number, whichever is greater. Since in the bug's test
case field_length is UINT_MAX32, we get the same value as the
display width. This does not make any sense because for numeric
values field_length only matters for ZEROFILL columns,
otherwise it does not make sense to allocate that much memory
just to print a number. Field_float::val_str() has a similar
problem.
2. Even if the above wasn't the case, we would still get a
crash on a slightly different test case when trying to allocate
UINT_MAX32 bytes with String::alloc() because the latter does
not handle such large input values correctly due to alignment
overflows.
3. Even when String::alloc() is fixed to return an error when
an alignment overflow occurs, there is still a problem because
almost no callers check its return value, and
Field_double::val_str() is not an exception (same for
Field_float::val_str()).
4. Even if all of the above wasn't the case, creating a
Field_double object with UINT_MAX32 as its field_length does
not make much sense either, since the .frm code limits it to
MAX_FIELD_CHARLENGTH (255) bytes. Such a beast can only be
created by create_tmp_field_from_item() from an Item with
REAL_RESULT as its result_type() and UINT_MAX32 as its
max_length.
5. For the bug's test case, the above condition (REAL_RESULT
Item with max_length = UINT_MAX32) was a result of
Item_func_if::fix_length_and_dec() "shortcutting" aggregation
of argument types when one of the arguments was a constant
NULL. In this case, the attributes of the aggregated type were
simply copied from the other, non-NULL argument, but max_length
was still calculated as per the general, non-shortcut case, by
choosing the greatest of argument's max_length, which is
obviously not correct.
The patch addresses all of the above problems, even though
fixing the assertion failure for the particular test case would
require only a subset of the above problems to be solved.
client/sql_string.cc:
Return an error in case of uint32 overflow in alignment.
Also assert there was no overflow to help find such conditions
in debug builds, since almost no callers check the return value
of String::alloc().
mysql-test/r/func_if.result:
Add a test case for bug #55077.
mysql-test/t/func_if.test:
Add a test case for bug #55077.
sql/field.cc:
- Assert we don't operate with fields wider than 255
(MAX_FIELD_CHARLENGTH) bytes in both Field_float and
Field_double.
- Don't take field_length into account when calculating the
output buffer length.
- Check the return value of String::alloc()
sql/item_cmpfunc.cc:
When shortcutting type aggregation, don't take the NULL
argument's max_length into account.
sql/sql_string.cc:
Return an error in case of uint32 overflow in alignment.
Also assert there was no overflow to help find such conditions
in debug builds, since almost no callers check the return value
of String::alloc().
Problem: a few functions did not calculate their max_length correctly.
This is an after-fix for WL#2649 Number-to-string conversions".
Fix: changing the buggy functions to calculate max_length
using fix_char_length() introduced in WL#2649,
instead of setting max_length directly
mysql-test/include/ctype_numconv.inc
Adding new tests
mysql-test/r/ctype_binary.result
Adding new tests
mysql-test/r/ctype_cp1251.result
Adding new tests
mysql-test/r/ctype_latin1.result
Adding new tests
mysql-test/r/ctype_ucs.result
Adding new tests
mysql-test/r/ctype_utf8.result
Adding new tests
mysql-test/t/ctype_utf8.test
Including ctype_numconv
sql/item.h
- Introducing new method fix_char_length_ulonglong(),
for the cases when length is potentially greater
than UINT_MAX32. This method removes a few
instances of duplicate code, e.g. in item_strfunc.cc.
- Setting collation in Item_copy properly. This change
fixes wrong metadata on client side in some cases, when
"binary" instead of the real character set was reported.
sql/item_cmpfunc.cc
- Using fix_char_length() and max_char_length() methods,
instead of direct access to max_length, to calculate
item length properly.
- Moving count_only_length() in COALESCE after
agg_arg_charsets_for_string_result(). The old
order was incorrect and led to wrong length
calucation in case of multi-byte character sets.
sql/item_func.cc
Fixing that count_only_length() didn't work
properly for multi-byte character sets.
Using fix_char_length() and max_char_length()
instead of direct access to max_length.
sql/item_strfunc.cc
- Using fix_char_length(), fix_char_length_ulonglong(),
max_char_length() instead of direct access to max_length.
- Removing wierd condition: "if (collation.collation->mbmaxlen > 0)",
which is never FALSE.
file .\item_subselect.cc, line 836
IN quantified predicates are never executed directly. They are rather wrapped
inside nodes called IN Optimizers (Item_in_optimizer) which take care of the
execution. However, this is not done during query preparation. Unfortunately
the LIKE predicate pre-evaluates constant right-hand side arguments even
during name resolution. Likely this is meant as an optimization.
Fixed by not pre-evaluating LIKE arguments in view prepare mode.
This bug is a design flaw of the fix for the bug#33546. It assumed that an
item can be used only in one comparison context, but actually it isn't the
case. Item_cache_datetime is used to store result for MIX/MAX aggregate
functions. Because Arg_comparator always compares datetime values as INTs when
possible the Item_cache_datetime most time caches only INT value. But
since all datetime values has STRING result type MIN/MAX functions are asked
for a STRING value when the result is being sent to a client. The
Item_cache_datetime was designed to avoid conversions and get INT/STRING
values from an underlying item, but at the moment the values is asked
underlying item doesn't hold it anymore thus wrong result is returned.
Beside that MIN/MAX aggregate functions was wrongly initializing cached result
and this led to a wrong result.
The Item::has_compatible_context helper function is added. It checks whether
this and given items has the same comparison context or can be compared as
DATETIME values by Arg_comparator. The equality propagation optimization is
adjusted to take into account that items which being compared as DATETIME
can have different comparison contexts.
The Item_cache_datetime now converts cached INT value to a correct STRING
DATETIME value by means of number_to_datetime & my_TIME_to_str functions.
The Arg_comparator::set_cmp_context_for_datetime helper function is added.
It sets comparison context of items being compared as DATETIMEs to INT if
items will be compared as longlong.
The Item_sum_hybrid::setup function now correctly initializes its result
value.
In order to avoid unnecessary conversions Item_sum_hybrid now states that it
can provide correct longlong value if the item being aggregated can do it
too.
mysql-test/r/group_by.result:
Added a test case for the bug#49771.
sql/item.cc:
Bug#49771: Incorrect MIN/MAX for date/time values.
The equality propagation mechanism is adjusted to take into account that
items which being compared as DATETIME can have different comparison
contexts.
The Item_cache_datetime now converts cached INT value to a correct STRING
DATETIME/TIME value.
sql/item.h:
Bug#49771: Incorrect MIN/MAX for date/time values.
The Item::has_compatible_context helper function is added. It checks whether
this and given items has the same comparison context or can be compared as
DATETIME values by Arg_comparator.
Added Item_cache::clear helper function.
sql/item_cmpfunc.cc:
Bug#49771: Incorrect MIN/MAX for date/time values.
The Arg_comparator::set_cmp_func now sets the correct comparison context
for items being compared as DATETIME values.
sql/item_cmpfunc.h:
Bug#49771: Incorrect MIN/MAX for date/time values.
The Arg_comparator::set_cmp_context_for_datetime helper function is added.
It sets comparison context of items being compared as DATETIMEs to INT if
items will be compared as longlong.
sql/item_sum.cc:
Bug#49771: Incorrect MIN/MAX for date/time values.
The Item_sum_hybrid::setup function now correctly initializes its result
value.
sql/item_sum.h:
Bug#49771: Incorrect MIN/MAX for date/time values.
In order to avoid unnecessary conversions Item_sum_hybrid now states that it
can provide correct longlong value if the item being aggregated can do it
too.
If the expression for a virtual column of table contained datetime
comparison then the execution of the second query that used this
virtual column caused a crash. It happened because the execution
of the first query that used this virtual column inserted a cached
item into the expression tree. The cached tree was allocated in
the statement memory while the expression tree was allocated in
the table memory.
Now the cached items that are inserted into expressions for virtual
columns with datetime comparisons are always allocated in the same
mem_root as the expressions for virtual columns. So now the inserted
cached items are valid for any queries that use these virtual columns.
Fixed compiler warnings.
queues.h and queues.c are now based on the UNIREG code and thus made BSD.
Fix code to use new queue() interface. This mostly affects how you access elements in the queue.
If USE_NET_CLEAR is not set, don't clear connection from unexpected characters. This should give a speed up when doing a lot of fast queries.
Fixed some code in ma_ft_boolean_search.c that had not made it from myisam/ft_boolean_search.c
include/queues.h:
Use UNIREG code base (BSD)
Changed init_queue() to take all initialization arguments.
New interface to access elements in queue
include/thr_alarm.h:
Changed to use time_t instead of ulong (portability)
Added index_in_queue, to be able to remove random element from queue in O(1)
mysys/queues.c:
Use UNIREG code base (BSD)
init_queue() and reinit_queue() now takes more initialization arguments. (No need for init_queue_ex() anymore)
Now one can tell queue_insert() to store in the element a pointer to where element is in queue. This allows one to remove elements from queue in O(1) instead of O(N)
mysys/thr_alarm.c:
Use new option in queue() to allow fast removal of elements.
Do less inside LOCK_alarm mutex.
This should give a major speed up of thr_alarm usage when there is many threads
sql/create_options.cc:
Fixed wrong printf
sql/event_queue.cc:
Use new queue interface()
sql/filesort.cc:
Use new queue interface()
sql/ha_partition.cc:
Use new queue interface()
sql/ha_partition.h:
Fixed compiler warning
sql/item_cmpfunc.cc:
Fixed compiler warning
sql/item_subselect.cc:
Use new queue interface()
Removed not used variable
sql/net_serv.cc:
If USE_NET_CLEAR is not set, don't clear connection from unexpected characters.
This should give a speed up when doing a lot of fast queries at the disadvantage that if there is a bug in the client protocol the connection will be dropped instead of being unnoticed.
sql/opt_range.cc:
Use new queue interface()
Fixed compiler warnings
sql/uniques.cc:
Use new queue interface()
storage/maria/ma_ft_boolean_search.c:
Copy code from myisam/ft_boolean_search.c
Use new queue interface()
storage/maria/ma_ft_nlq_search.c:
Use new queue interface()
storage/maria/ma_sort.c:
Use new queue interface()
storage/maria/maria_pack.c:
Use new queue interface()
Use queue_fix() instead of own loop to fix queue.
storage/myisam/ft_boolean_search.c:
Use new queue interface()
storage/myisam/ft_nlq_search.c:
Use new queue interface()
storage/myisam/mi_test_all.sh:
Remove temporary file from last run
storage/myisam/myisampack.c:
Use new queue interface()
Use queue_fix() instead of own loop to fix queue.
storage/myisam/sort.c:
Use new queue interface()
storage/myisammrg/myrg_queue.c:
Use new queue interface()
storage/myisammrg/myrg_rnext.c:
Use new queue interface()
storage/myisammrg/myrg_rnext_same.c:
Use new queue interface()
storage/myisammrg/myrg_rprev.c:
Use new queue interface()
libmysqld/Makefile.am:
The new file added.
mysql-test/r/index_merge_myisam.result:
subquery_cache optimization option added.
mysql-test/r/myisam_mrr.result:
subquery_cache optimization option added.
mysql-test/r/subquery_cache.result:
The subquery cache tests added.
mysql-test/r/subselect3.result:
Subquery cache switched off to avoid changing read statistics.
mysql-test/r/subselect3_jcl6.result:
Subquery cache switched off to avoid changing read statistics.
mysql-test/r/subselect_no_mat.result:
subquery_cache optimization option added.
mysql-test/r/subselect_no_opts.result:
subquery_cache optimization option added.
mysql-test/r/subselect_no_semijoin.result:
subquery_cache optimization option added.
mysql-test/r/subselect_sj.result:
subquery_cache optimization option added.
mysql-test/r/subselect_sj_jcl6.result:
subquery_cache optimization option added.
mysql-test/t/subquery_cache.test:
The subquery cache tests added.
mysql-test/t/subselect3.test:
Subquery cache switched off to avoid changing read statistics.
sql/CMakeLists.txt:
The new file added.
sql/Makefile.am:
The new files added.
sql/item.cc:
Expression cache item (Item_cache_wrapper) added.
Item_ref and Item_field fixed for correct usage of result field and fast resolwing in SP.
sql/item.h:
Expression cache item (Item_cache_wrapper) added.
Item_ref and Item_field fixed for correct usage of result field and fast resolwing in SP.
sql/item_cmpfunc.cc:
Subquery cache added.
sql/item_cmpfunc.h:
Subquery cache added.
sql/item_subselect.cc:
Subquery cache added.
sql/item_subselect.h:
Subquery cache added.
sql/item_sum.cc:
Registration of subquery parameters added.
sql/mysql_priv.h:
subquery_cache optimization option added.
sql/mysqld.cc:
subquery_cache optimization option added.
sql/opt_range.cc:
Fix due to subquery cache.
sql/opt_subselect.cc:
Parameters of the function cahnged.
sql/procedure.h:
.h file guard added.
sql/sql_base.cc:
Registration of subquery parameters added.
sql/sql_class.cc:
Option to allow add indeces to temporary table.
sql/sql_class.h:
Item iterators added.
Option to allow add indeces to temporary table.
sql/sql_expression_cache.cc:
Expression cache for caching subqueries added.
sql/sql_expression_cache.h:
Expression cache for caching subqueries added.
sql/sql_lex.cc:
Registration of subquery parameters added.
sql/sql_lex.h:
Registration of subqueries and subquery parameters added.
sql/sql_select.cc:
Subquery cache added.
sql/sql_select.h:
Subquery cache added.
sql/sql_union.cc:
A new parameter to the function added.
sql/sql_update.cc:
A new parameter to the function added.
sql/table.cc:
Procedures to manage temporarty tables index added.
sql/table.h:
Procedures to manage temporarty tables index added.
storage/maria/ha_maria.cc:
Fix of handler to allow destoy a table in case of error during the table creation.
storage/maria/ha_maria.h:
.h file guard added.
storage/myisam/ha_myisam.cc:
Fix of handler to allow destoy a table in case of error during the table creation.
Incorrect handling of NULL arguments could lead to a crash on
the IN or CASE operations when either NULL arguments were
passed explicitly as arguments (IN) or implicitly generated by
the WITH ROLLUP modifier (both IN and CASE).
Item_func_case::find_item() assumed all necessary comparators
to be instantiated in fix_length_and_dec(). However, in the
presence of WITH ROLLUP modifier, arguments could be
substituted with an Item_null leading to an "unexpected"
STRING_RESULT comparator being invoked.
In addition to the problem identical to the above,
Item_func_in::val_int() could crash even with explicitly passed
NULL arguments due to an optimization in fix_length_and_dec()
leading to NULL arguments being ignored during comparators
creation.
mysql-test/r/func_in.result:
Test cases for bug#54477.
mysql-test/t/func_in.test:
Test cases for bug#54477.
sql/item_cmpfunc.cc:
Added additional checks for Item_nulls in
Item_func_case::find_item() and Item_func_in::val_int().
Problem: a flaw (derefencing a NULL pointer) in the LIKE optimization
code may lead to a server crash in some rare cases.
Fix: check the pointer before its dereferencing.
mysql-test/r/func_like.result:
Fix for bug #54575: crash when joining tables with unique set column
- test result.
mysql-test/t/func_like.test:
Fix for bug #54575: crash when joining tables with unique set column
- test case.
sql/item_cmpfunc.cc:
Fix for bug #54575: crash when joining tables with unique set column
- check res2 buffer pointer before its dereferencing
as it may be NULL in some cases.
when it should use index
Sometimes the LEFT/RIGHT JOIN with an empty table caused an
unnecessary filesort.
Sample query, where t1.i1 is indexed and t3 is empty:
SELECT t1.*, t2.* FROM t1 JOIN t2 ON t1.i1 = t2.i2
LEFT JOIN t3 ON t2.i2 = t3.i3
ORDER BY t1.i1 LIMIT 5;
The server erroneously used an item of empty outer-joined
table as a common constant of a Item_equal (multi-equivalence
expression).
By the fix for the bug 16590 the constant status of such
an item has been propagated to st_table::const_key_parts
map bits related to other Item_equal argument-related
key parts (those are obviously not constant in our case).
As far as test_if_skip_sort_order function skips constant
prefixes of testing keys, this caused an ignorance of
available indices, since some prefixes were marked as
constant by mistake.
mysql-test/r/order_by.result:
Test case for bug #38745.
mysql-test/t/order_by.test:
Test case for bug #38745.
sql/item.h:
Bug #38745: MySQL 5.1 optimizer uses filesort for ORDER BY
when it should use index
Item::is_outer_field() has been added and overloaded for
Item_field and Item_ref classes.
sql/item_cmpfunc.cc:
Bug #38745: MySQL 5.1 optimizer uses filesort for ORDER BY
when it should use index
Item_equal::update_const() and Item_equal::update_used_tables()
have been updated to not take into account the constantness
of outer-joined table items.
- Code cleanu.
- Make MWL#90 code require @@optimizer_switch='semijoin=on'
- Update test results with the above
- Fork subselect_mat.test - we want to check both semi-join materialization,
which now has broader scope and non-semijoin materialization.
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
mysql-test/extra/rpl_tests/rpl_tmp_table_and_DDL.test:
Added missing sync_slave_with_master; Fixes random failures
mysql-test/include/default_mysqld.cnf:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
mysql-test/lib/My/SafeProcess/safe_process.cc:
Fixed compiler warning
mysql-test/lib/v1/mysql-test-run.pl:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
mysql-test/suite/rpl/r/rpl_do_grant.result:
Updated test results
mysql-test/suite/rpl/t/rpl_do_grant.test:
Added missing sync_slave_with_master; Fixes random failures
Had to explictely do stop slave before DROP USER to avoid failure on slave as the user is already dropped on slave.
mysql-test/suite/rpl/t/rpl_name_const.test:
Added missing sync_slave_with_master; Fixes random failures
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Added missing sync_slave_with_master; Fixes random failures
mysql-test/t/bug47671-master.opt:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
mysql-test/t/ctype_latin1_de-master.opt:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
mysql-test/t/ctype_ucs2_def-master.opt:
default-character-set -> character-set-server (removes warning in error files for usage of deprecated options)
sql-common/client.c:
Fixed compiler warning
sql/item.cc:
Renamed function to remove compiler warnings (with gcc)
sql/item.h:
Renamed function to remove compiler warnings (with gcc)
sql/item_cmpfunc.cc:
Renamed function to remove compiler warnings (with gcc)
sql/item_create.cc:
Renamed function to remove compiler warnings (with gcc)
sql/item_create.h:
Renamed function to remove compiler warnings (with gcc)
sql/item_sum.cc:
Renamed function to remove compiler warnings (with gcc)
sql/item_sum.h:
Renamed function to remove compiler warnings (with gcc)
sql/set_var.cc:
Don't use bit_do_set() / bot_is_set() / bit_do_clear() as this generates compiler warnings
(They are also of no use as we know the value can hold the bits)
sql/sql_yacc.yy:
Renamed function to remove compiler warnings (with gcc)
storage/example/ha_example.h:
Fixed old read_time() prototype
storage/maria/ma_search.c:
Added extra variables to remove compiler warnings
storage/maria/maria_def.h:
Added extra variables to remove compiler warnings
storage/myisam/ft_stopwords.c:
Added cast to get rid of compiler warning
storage/xtradb/fil/fil0fil.c:
Added cast to get rid of compiler warning
storage/xtradb/include/page0page.h:
Added const to get rid of compiler warning
storage/xtradb/include/page0page.ic:
Added const to get rid of compiler warning
support-files/compiler_warnings.supp:
Added suppression of strict-aliasing
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
(Original patch by Sinisa Milivojevic)
The YEAR(4) value of 2000 was equal to the "bad" YEAR(4) value of 0000.
The get_year_value() function has been modified to not adjust bad
YEAR(4) value to 2000.
mysql-test/r/type_year.result:
Test case for bug #49910.
mysql-test/t/type_year.test:
Test case for bug #49910.
sql/item_cmpfunc.cc:
Bug #49910: Behavioural change in SELECT/WHERE on YEAR(4) data type
The get_year_value() function has been modified to not adjust bad
YEAR(4) value to 2000.
BUG#50019: Wrong result for IN-subquery with materialization
- Fix equality substitution in presense of semi-join materialization, lookup and scan variants
(started off from fix by Evgen Potemkin, then modified it to work in all cases)
SunStudio
SunStudio compilers of late warn about methods that might hide
methods in base classes due to the use of overloading combined
with overriding. SunStudio also warns about variables defined
in local socpe or method arguments that have the same name as
a member attribute of the class.
This patch renames methods that might hide base class methods,
to make it easier both for humans and compilers to see what is
actually called. It also renames variables in local scope.
sql/field.cc:
Local scope variable or method argument same as class
attribute.
sql/item_cmpfunc.cc:
Local scope variable or method argument same as class
attribute.
sql/item_create.cc:
Renaming base class create() to create_func().
sql/item_create.h:
Renaming base class create() to create_func().
sql/protocol.cc:
Local scope variable or method argument same as class
attribute.
sql/sql_profile.cc:
Local scope variable or method argument same as class
attribute.
sql/sql_select.cc:
Local scope variable or method argument same as class
attribute.
sql/sql_yacc.yy:
Renaming base class create() to create_func().
storage/federated/ha_federated.cc:
Local scope variable or method argument same as class
attribute.
storage/myisammrg/ha_myisammrg.cc:
Local scope variable or method argument same as class
attribute.
It appears that stack overflow checks for recusrive stored procedure
calls, that run in the normal server, did not work in embedded and were
dummified with preprocessor magic( #ifndef EMBEDDED_SERVER ).
The fix is to remove ifdefs, there is no reason not to run overflow checks
and crash in deeply recursive calls.
Note: Start of the stack (thd->thread_stack variable) in embedded is not
necessarily exact but stil provides the best guess. Unless the caller of
mysql_read_connect() is already deep in the stack, thd->thread_stack
variable should approximate stack start address well.
added:
include/ctype_numconv.inc
mysql-test/include/ctype_numconv.inc
mysql-test/r/ctype_binary.result
mysql-test/t/ctype_binary.test
Adding tests
modified:
mysql-test/r/bigint.result
mysql-test/r/case.result
mysql-test/r/create.result
mysql-test/r/ctype_cp1251.result
mysql-test/r/ctype_latin1.result
mysql-test/r/ctype_ucs.result
mysql-test/r/func_gconcat.result
mysql-test/r/func_str.result
mysql-test/r/metadata.result
mysql-test/r/ps_1general.result
mysql-test/r/ps_2myisam.result
mysql-test/r/ps_3innodb.result
mysql-test/r/ps_4heap.result
mysql-test/r/ps_5merge.result
mysql-test/r/show_check.result
mysql-test/r/type_datetime.result
mysql-test/r/type_ranges.result
mysql-test/r/union.result
mysql-test/suite/ndb/r/ps_7ndb.result
mysql-test/t/ctype_cp1251.test
mysql-test/t/ctype_latin1.test
mysql-test/t/ctype_ucs.test
mysql-test/t/func_str.test
Fixing tests
@ sql/field.cc
- Return str result using my_charset_numeric.
- Using real multi-byte aware str_to_XXX functions
to handle tricky charset values propely (e.g. UCS2)
@ sql/field.h
- Changing derivation of non-string field types to DERIVATION_NUMERIC.
- Changing binary() for numeric/datetime fields to always
return TRUE even if charset is not my_charset_bin. We need
this to keep ha_base_keytype() return HA_KEYTYPE_BINARY.
- Adding BINARY_FLAG into some fields, because it's not
being set automatically anymore with
"my_charset_bin to my_charset_numeric" change.
- Changing derivation for numeric/datetime datatypes to a weaker
value, to make "SELECT concat('string', field)" use character
set of the string literal for the result of the function.
@ sql/item.cc
- Implementing generic val_str_ascii().
- Using max_char_length() instead of direct read of max_length
to make "tricky" charsets like UCS2 work.
NOTE: in the future we'll possibly remove all direct reads of max_length
- Fixing Item_num::safe_charset_converter().
Previously it alligned binary string to
character string (for example by adding leading 0x00
when doing binary->UCS2 conversion). Now it just
converts from my_charset_numbner to "tocs".
- Using val_str_ascii() in Item::get_time() to make UCS2 arguments work.
- Other misc changes
@ sql/item.h
- Changing MY_COLL_CMP_CONV and MY_COLL_ALLOW_CONV to
bit operations instead of hard-coded bit masks.
- Addding new method DTCollation.set_numeric().
- Adding new methods to Item.
- Adding helper functions to make code look nicer:
agg_item_charsets_for_string_result()
agg_item_charsets_for_comparison()
- Changing charset for Item_num-derived items
from my_charset_bin to my_charset_numeric
(which is an alias for latin1).
@ sql/item_cmpfunc.cc
- Using new helper functions
- Other misc changes
@ sql/item_cmpfunc.h
- Fixing strcmp() to return max_length=2.
Previously it returned 1, which was wrong,
because it did not fit '-1'.
@ sql/item_func.cc
- Using new helper functions
- Other minor changes
@ sql/item_func.h
- Removing unused functions
- Adding helper functions
agg_arg_charsets_for_string_result()
agg_arg_charsets_for_comparison()
- Adding set_numeric() into constructors of numeric items.
- Using fix_length_and_charset() and fix_char_length()
instead of direct write to max_length.
@ sql/item_geofunc.cc
- Changing class for Item_func_geometry_type and
Item_func_as_wkt from Item_str_func to
Item_str_ascii_func, to make them return UCS2 result
properly (when character_set_connection=ucs2).
@ sql/item_geofunc.h
- Changing class for Item_func_geometry_type and
Item_func_as_wkt from Item_str_func to
Item_str_ascii_func, to make them return UCS2 result
properly (when @@character_set_connection=ucs2).
@ sql/item_strfunc.cc
- Implementing Item_str_func::val_str().
- Renaming val_str to val_str_ascii for some items,
to make them work with UCS2 properly.
- Using new helper functions
- All single-argument functions that expect string
result now call this method:
agg_arg_charsets_for_string_result(collation, args, 1);
This enables character set conversion to @@character_set_connection
in case of pure numeric input.
@ sql/item_strfunc.h
- Introducing Item_str_ascii_func - for functions
which return pure ASCII data, for performance purposes,
as well as for the cases when the old implementation
of val_str() was heavily 8-bit oriented and implementing
a UCS2-aware version is tricky.
@ sql/item_sum.cc
- Using new helper functions.
@ sql/item_timefunc.cc
- Using my_charset_numeric instead of my_charset_bin.
- Using fix_char_length(), fix_length_and_charset()
and fix_length_and_charset_datetime()
instead of direct write to max_length.
- Using tricky-charset aware function str_to_time_with_warn()
@ sql/item_timefunc.h
- Using new helper functions for charset and length initialization.
- Changing base class for Item_func_get_format() to make
it return UCS2 properly (when character_set_connection=ucs2).
@ sql/item_xmlfunc.cc
- Using new helper function
@ sql/my_decimal.cc
- Adding a new DECIMAL to CHAR converter
with real multibyte support (e.g. UCS2)
@ sql/mysql_priv.h
- Introducing a new derivation level for numeric/datetime data types.
- Adding macros for my_charset_numeric and MY_REPERTOIRE_NUMERIC.
- Adding prototypes for str_set_decimal()
- Adding prototypes for character-set aware str_to_xxx() functions.
@ sql/protocol.cc
- Changing charsetnr to "binary" client-side metadata for
numeric/datetime data types.
@ sql/time.cc
- Adding to_ascii() helper function, to convert a string
in any character set to ascii representation. In the
future can be extended to understand digits written
in various non-Latin word scripts.
- Adding real multy-byte character set aware versions for str_to_XXXX,
to make these these type of queries work correct:
INSERT INTO t1 SET datetime_column=ucs2_expression;
@ strings/ctype-ucs2.c
- endptr was not calculated correctly. INSERTing of UCS2
values into numeric columns returned warnings about
truncated wrong data.
- Marked a couple of tests with --big
- Fixed xtradb/handler/ha_innodb.cc to call explain_filename()
storage/xtradb/handler/ha_innodb.cc:
Call explain_filename() to get proper names for partitioned tables
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
CMakeLists.txt:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
client/mysql.cc:
don't crash with --show-warnings when mysqld dies
config/ac-macros/plugins.m4:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
include/my_getopt.h:
comments
include/my_pthread.h:
fix double #define
mysql-test/mysql-test-run.pl:
run sys_vars suite by default
properly recognize envirinment variables (e.g. MTR_MAX_SAVE_CORE) set to 0
escape gdb command line arguments
mysql-test/suite/sys_vars/r/rpl_init_slave_func.result:
init_slave+utf8 bug
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
init_slave+utf8 bug
mysys/my_getopt.c:
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
mysys/typelib.c:
support for flagset
sql/ha_ndbcluster.cc:
backport from telco tree
sql/item_func.cc:
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
sql/sql_builtin.cc.in:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
sql/sql_plugin.cc:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#32902 plugin variables don't know their names
Bug#44797 plugins w/o command-line options have no disabling option in --help
sql/sys_vars.cc:
all server variables are defined here
storage/myisam/ft_parser.c:
remove unnecessary updates of param->quot
storage/myisam/ha_myisam.cc:
myisam_* variables belong here
strings/my_vsnprintf.c:
%o and %llx
unittest/mysys/my_vsnprintf-t.c:
%o and %llx tests
vio/viosocket.c:
bugfix: fix @@wait_timeout to work with socket timeouts (vs. alarm thread)
