mysys/errors.c:
revert upstream's fix. use a much simpler one
mysys/my_write.c:
revert upstream's fix. use a simpler one
sql/item_xmlfunc.cc:
useless, but ok
sql/mysqld.cc:
simplify upstream's fix
storage/heap/hp_delete.c:
remove upstream's fix.
we'll use a much less expensive approach.
Fix that CHANGE MASTER ... MASTER_GTID_POS="" works to start from the very
beginning of the binary log (with test case).
Fix that not finding the requested GTID position in master binlog results in
fatal error, not endless connect retry.
Add test case demonstrating multi-source replication with GTID.
Test that we can move from being slave of two masters to be a slave
deeper down in the hierarchy (of a higher-up multi-source slave),
and vice versa.
- Add first basic mysql-test-run test case which tests switch to new master
using MASTER_GTID_POS=AUTO.
- When we connect with GTID, do not use any old relay logs, as they may
contain the wrong events or be corrupt after crash.
- Fix old bug that fails replication if we receive a heartbeat event
immediately after an event was omitted in the stream from the master.
- Fix rpl_end to clear Gtid_Pos_Auto, to keep check_testcase happy.
PLATFORM= MACOSX10.6 X86_64 MAX
Problem: The test was failing on pb2's mac machine because
it was not cleaned up properly. The test checks if
the command 'start slave until' throws a proper
error when issued with a wrong number/type of
parameters. After this,the replication stream was
stopped using the include file 'rpl_end.inc'.
The errors thrown earlier left the slave in an
inconsistent state to be closed by the include
file which was caught by the mac machine.
Fix: Started slave by invoking start_slave.inc to have a
working slave before calling rpl_reset.inc
Problem: The test file was not in a good shape. It tested
start slave until relay log file/pos combination
wrongly. A couple of commands were executed at
master and replicated at slave. Next, the
coordinates in terms of relay log file and pos
were noted down followed by reset slave and start
slave until saved relay log file/pos. Reset slave
deletes all relay log files and makes the slave
forget its replication position. So, using the
saved coordiantes after reset slave is wrong.
Fix: Split the test in two parts:
a) Test for start slave until master log file/pos and
checking for correct errors in the failure
scenarios.
b) Test for start slave until relay log file/pos.
Problem: The variables auto_increment_increment and
auto_increment_offset were set in the the include
file rpl_init.inc. This was only configured for
some connections that are rarely used by test
cases, so likely that it will cause confusion.
If replication tests want to setup these variables
they should do so explicitly.
Fix:
a) Removed code to set the variables
auto_increment_increment and auto_increment_offset
in the include file.
b) Updated tests files using the same.
mysql-test/suite/heap/heap.result:
Added test case
mysql-test/suite/heap/heap.test:
Added test case
storage/heap/hp_delete.c:
Fixed that we don't change order of keys for the current key when we delete them from the hash table.
Fixed that 'current_hash_ptr' is correct after heap_delete_key().
Don't "reset current_hash_ptr" on delete; This will improve time a lot for delete of rows when not all rows matches the search criteria.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
DOWNGRADED FROM 5.6.11 TO 5.6.10
Problem was new syntax not accepted by previous version.
Fixed by adding version comment of /*!50531 around the
new syntax.
Like this in the .frm file:
'PARTITION BY KEY /*!50611 ALGORITHM = 2 */ () PARTITIONS 3'
and also changing the output from SHOW CREATE TABLE to:
CREATE TABLE t1 (a INT)
/*!50100 PARTITION BY KEY */ /*!50611 ALGORITHM = 1 */ /*!50100 ()
PARTITIONS 3 */
It will always add the ALGORITHM into the .frm for KEY [sub]partitioned
tables, but for SHOW CREATE TABLE it will only add it in case it is the non
default ALGORITHM = 1.
Also notice that for 5.5, it will say /*!50531 instead of /*!50611, which
will make upgrade from 5.5 > 5.5.31 to 5.6 < 5.6.11 fail!
If one downgrades an fixed version to the same major version (5.5 or 5.6) the
bug 14521864 will be visible again, but unless the .frm is updated, it will
work again when upgrading again.
Also fixed so that the .frm does not get updated version
if a single partition check passes.
SUITE FOR 5.1
SYS_VARS suite is not enabled in MTR by default
run. Enabling it with this check-in.
mysql-test/suite/sys_vars/t/disabled.def:
Till the bugs are fixed, disabling the failed test scripts
innodb_bug12400341.test is disabled for valgrind daily test.
It might be affected by the previous test's undo slots existing,
because of slower execution.
Due to an internal change in the server code in between 5.1 and 5.5
(wl#2649) the hash function used in KEY partitioning changed
for numeric and date/time columns (from binary hash calculation
to character based hash calculation).
Also enum/set changed from latin1 ci based hash calculation to
binary hash between 5.1 and 5.5. (bug#11759782).
These changes makes KEY [sub]partitioned tables on any of
the affected column types incompatible with 5.5 and above,
since the calculation of partition id differs.
Also since InnoDB asserts that a deleted row was previously
read (positioned), the server asserts on delete of a row that
is in the wrong partition.
The solution for this situation is:
1) The partitioning engine will check that delete/update will go to the
partition the row was read from and give an error otherwise, consisting
of the rows partitioning fields. This will avoid asserts in InnoDB and
also alert the user that there is a misplaced row. A detailed error
message will be given, including an entry to the error log consisting
of both table name, partition and row content (PK if exists, otherwise
all partitioning columns).
2) A new optional syntax for KEY () partitioning in 5.5 is allowed:
[SUB]PARTITION BY KEY [ALGORITHM = N] (list_of_cols)
Where N = 1 uses the same hashing as 5.1 (Numeric/date/time fields uses
binary hashing, ENUM/SET uses charset hashing) N = 2 uses the same
hashing as 5.5 (Numeric/date/time fields uses charset hashing,
ENUM/SET uses binary hashing). If not set on CREATE/ALTER it will
default to 2.
This new syntax should probably be ignored by NDB.
3) Since there is a demand for avoiding scanning through the full
table, during upgrade the ALTER TABLE t PARTITION BY ... command is
considered a no-op (only .frm change) if everything except ALGORITHM
is the same and ALGORITHM was not set before, which allows manually
upgrading such table by something like:
ALTER TABLE t PARTITION BY KEY ALGORITHM = 1 () or
ALTER TABLE t PARTITION BY KEY ALGORITHM = 2 ()
4) Enhanced partitioning with CHECK/REPAIR to also check for/repair
misplaced rows. (Also works for ALTER TABLE t CHECK/REPAIR PARTITION)
CHECK FOR UPGRADE:
If the .frm version is < 5.5.3
and uses KEY [sub]partitioning
and an affected column type
then it will fail with an message:
KEY () partitioning changed, please run:
ALTER TABLE `test`.`t1` PARTITION BY KEY ALGORITHM = 1 (a)
PARTITIONS 12
(i.e. current partitioning clause, with the addition of
ALGORITHM = 1)
CHECK without FOR UPGRADE:
if MEDIUM (default) or EXTENDED options are given:
Scan all rows and verify that it is in the correct partition.
Fail for the first misplaced row.
REPAIR:
if default or EXTENDED (i.e. not QUICK/USE_FRM):
Scan all rows and every misplaced row is moved into its correct
partitions.
5) Updated mysqlcheck (called by mysql_upgrade) to handle the
new output from CHECK FOR UPGRADE, to run the ALTER statement
instead of running REPAIR.
This will allow mysql_upgrade (or CHECK TABLE t FOR UPGRADE) to upgrade
a KEY [sub]partitioned table that has any affected field type
and a .frm version < 5.5.3 to ALGORITHM = 1 without rebuild.
Also notice that if the .frm has a version of >= 5.5.3 and ALGORITHM
is not set, it is not possible to know if it consists of rows from
5.1 or 5.5! In these cases I suggest that the user does:
(optional)
LOCK TABLE t WRITE;
SHOW CREATE TABLE t;
(verify that it has no ALGORITHM = N, and to be safe, I would suggest
backing up the .frm file, to be used if one need to change to another
ALGORITHM = N, without needing to rebuild/repair)
ALTER TABLE t <old partitioning clause, but with ALGORITHM = N>;
which should set the ALGORITHM to N (if the table has rows from
5.1 I would suggest N = 1, otherwise N = 2)
CHECK TABLE t;
(here one could use the backed up .frm instead and change to a new N
and run CHECK again and see if it passes)
and if there are misplaced rows:
REPAIR TABLE t;
(optional)
UNLOCK TABLES;
When CHANGE MASTER fails, it may or may not have already added
the Master_info * to the index. Implement logic that properly
handles removal and freeing in both cases.
PROPERLY QUOTED IN BINLOG FILE
Problem: In load data file query, User variables are allowed
inside "Into_list" and "Set_list". These user variables used
inside these two lists are not properly guarded with backticks
while server is writting into binlog. Hence user variable names
like a` cannot be used in this context.
Fix: Properly quote these variables while
writting into binlog
mysql-test/r/func_compress.result:
changing result file
mysql-test/r/variables.result:
changing result file
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
changing result file
sql/item_func.cc:
Quote the user variable items
The problem was that a temporary table was re-created as a non-temporary table.
mysql-test/suite/maria/truncate.result:
Added test cases
mysql-test/suite/maria/truncate.test:
Added test cases
sql/sql_truncate.cc:
Mark that table to be created is a temporary table
storage/maria/ha_maria.cc:
Ensure that temporary tables are not transactional.
libmysqld/lib_sql.cc:
* don't overwrite my_progname in embedded
* this memroot is sometimes freed by the caller, outside of THD context
mysql-test/t/user_var.test:
typo: duplicate line
* remove unused mysql_option
* don't allocate 5GB of memory in the mtr tests
* restore the behavior in dynamic_column_offset_byte(), put the ifdef correctly
* prefer __attribute__((unused)) to #ifdef
* prefer UNINIT_VAR to LINT_INIT
* make most Warning_info users blissfully unaware of the postponed initialization
* use my_offsetof instead of offsetof where the compiler thinks the latter is incorrect
Base code and idea from a patch from by plinux at Taobao.
The idea is that we mark all memory that are thread specific with MY_THREAD_SPECIFIC.
Memory counting is done per thread in the my_malloc_size_cb_func callback function from my_malloc().
There are plenty of new asserts to ensure that for a debug server the counting is correct.
Information_schema.processlist gets two new columns: MEMORY_USED and EXAMINED_ROWS.
- The later is there mainly to show how query is progressing.
The following changes in interfaces was needed to get this to work:
- init_alloc_root() amd init_sql_alloc() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- One now have to use alloc_root_set_min_malloc() to set min memory to be allocated by alloc_root()
- my_init_dynamic_array() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- my_net_init() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- Added flag for hash_init() so that one can mark hash table to be thread specific.
- Added flags to init_tree() so that one can mark tree to be thread specific.
- Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
- Added flag to Warning_info::Warning_info() if the structure should be fully initialized.
- String elements can now be marked as thread specific.
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Changed type of myf from int to ulong, as this is always a set of bit flags.
Other things:
- Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
- We now also show EXAMINED_ROWS in SHOW PROCESSLIST
- Added new variable 'memory_used'
- Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
- Removed calls to the obsoleted function init_dynamic_array()
- Use set_current_thd() instead of my_pthread_setspecific_ptr(THR_THD,...)
client/completion_hash.cc:
Updated call to init_alloc_root()
client/mysql.cc:
Updated call to init_alloc_root()
client/mysqlbinlog.cc:
init_dynamic_array() -> my_init_dynamic_array()
Updated call to init_alloc_root()
client/mysqlcheck.c:
Updated call to my_init_dynamic_array()
client/mysqldump.c:
Updated call to init_alloc_root()
client/mysqltest.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Fixed compiler warnings
extra/comp_err.c:
Updated call to my_init_dynamic_array()
extra/resolve_stack_dump.c:
Updated call to my_init_dynamic_array()
include/hash.h:
Added HASH_THREAD_SPECIFIC
include/heap.h:
Added flag is internal temporary table.
include/my_dir.h:
Safety fix: Ensure that MY_DONT_SORT and MY_WANT_STAT don't interfer with other mysys flags
include/my_global.h:
Changed type of myf from int to ulong, as this is always a set of bit flags.
include/my_sys.h:
Added MY_THREAD_SPECIFIC and MY_THREAD_MOVE
Added malloc_flags to DYNAMIC_ARRAY
Added extra mysys flag argument to my_init_dynamic_array()
Removed deprecated functions init_dynamic_array() and my_init_dynamic_array.._ci
Updated paramaters for init_alloc_root()
include/my_tree.h:
Added my_flags to allow one to use MY_THREAD_SPECIFIC with hash tables.
Removed with_delete. One should now instead use MY_TREE_WITH_DELETE_FLAG
Updated parameters to init_tree()
include/myisamchk.h:
Added malloc_flags to allow one to use MY_THREAD_SPECIFIC for checks.
include/mysql.h:
Added MYSQL_THREAD_SPECIFIC_MALLOC
Used 'unused1' to mark memory as thread specific.
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Used 'unused1' to mark memory as thread specific.
Updated parameters for my_net_init()
libmysql/libmysql.c:
Updated call to init_alloc_root() to mark memory thread specific.
libmysqld/emb_qcache.cc:
Updated call to init_alloc_root()
libmysqld/lib_sql.cc:
Updated call to init_alloc_root()
mysql-test/r/create.result:
Updated results
mysql-test/r/user_var.result:
Updated results
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/is_columns_is.result:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/t/show_explain.test:
Fixed usage of debug variable so that one can run test with --debug
mysql-test/t/user_var.test:
Added test of memory_usage variable.
mysys/array.c:
Added extra my_flags option to init_dynamic_array() and init_dynamic_array2() so that one can mark memory with MY_THREAD_SPECIFIC
All allocated memory is marked with the given my_flags.
Removed obsolete function init_dynamic_array()
mysys/default.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
mysys/hash.c:
Updated call to my_init_dynamic_array_ci().
Allocated memory is marked with MY_THREAD_SPECIFIC if HASH_THREAD_SPECIFIC is used.
mysys/ma_dyncol.c:
init_dynamic_array() -> my_init_dynamic_array()
Added #if to get rid of compiler warnings
mysys/mf_tempdir.c:
Updated call to my_init_dynamic_array()
mysys/my_alloc.c:
Added extra parameter to init_alloc_root() so that one can mark memory with MY_THREAD_SPECIFIC
Extend MEM_ROOT with a flag if memory is thread specific.
This is stored in block_size, to keep the size of the MEM_ROOT object identical as before.
Allocated memory is marked with MY_THREAD_SPECIFIC if used with init_alloc_root()
mysys/my_chmod.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_chsize.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_copy.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_create.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_delete.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_error.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fopen.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fstream.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_getwd.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_lib.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Updated DBUG_PRINT because of change of myf type
mysys/my_lock.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_malloc.c:
Store at start of each allocated memory block the size of the block and if the block is thread specific.
Call malloc_size_cb_func, if set, with the memory allocated/freed.
Updated DBUG_PRINT because of change of myf type
mysys/my_open.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_pread.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_read.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_redel.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_rename.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_seek.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_sync.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_thr_init.c:
Ensure that one can call my_thread_dbug_id() even if thread is not properly initialized.
mysys/my_write.c:
Updated DBUG_PRINT because of change of myf type
mysys/mysys_priv.h:
Updated parameters to sf_malloc and sf_realloc()
mysys/safemalloc.c:
Added checking that for memory marked with MY_THREAD_SPECIFIC that it's the same thread that is allocation and freeing the memory.
Added sf_malloc_dbug_id() to allow MariaDB to specify which THD is handling the memory.
Added my_flags arguments to sf_malloc() and sf_realloc() to be able to mark memory with MY_THREAD_SPECIFIC.
Added sf_report_leaked_memory() to get list of memory not freed by a thread.
mysys/tree.c:
Added flags to init_tree() so that one can mark tree to be thread specific.
Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
Updated call to init_alloc_root()
All allocated memory is marked with the given malloc flags
mysys/waiting_threads.c:
Updated call to my_init_dynamic_array()
sql-common/client.c:
Updated call to init_alloc_root() and my_net_init() to mark memory thread specific.
Updated call to my_init_dynamic_array().
Added MYSQL_THREAD_SPECIFIC_MALLOC so that client can mark memory as MY_THREAD_SPECIFIC.
sql-common/client_plugin.c:
Updated call to init_alloc_root()
sql/debug_sync.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/event_scheduler.cc:
Removed calls to net_end() as this is now done in ~THD()
Call set_current_thd() to ensure that memory is assigned to right thread.
sql/events.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/filesort.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/filesort_utils.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/ha_ndbcluster.cc:
Updated call to init_alloc_root()
Updated call to my_net_init()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_ndbcluster_binlog.cc:
Updated call to my_net_init()
Updated call to init_sql_alloc()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_partition.cc:
Updated call to init_alloc_root()
sql/handler.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
Added missing call to my_dir_end()
sql/item_func.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_subselect.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_sum.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/log.cc:
More DBUG
Updated call to init_alloc_root()
sql/mdl.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/mysqld.cc:
Added total_memory_used
Updated call to init_alloc_root()
Move mysql_cond_broadcast() before my_thread_end()
Added mariadb_dbug_id() to count memory per THD instead of per thread.
Added my_malloc_size_cb_func() callback function for my_malloc() to count memory.
Move initialization of mysqld_server_started and mysqld_server_initialized earlier.
Updated call to my_init_dynamic_array().
Updated call to my_net_init().
Call my_pthread_setspecific_ptr(THR_THD,...) to ensure that memory is assigned to right thread.
Added status variable 'memory_used'.
Updated call to init_alloc_root()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/mysqld.h:
Added set_current_thd()
sql/net_serv.cc:
Added new parameter to my_net_init() so that one can mark memory with MY_THREAD_SPECIFIC.
Store in net->thread_specific_malloc if memory is thread specific.
Mark memory to be thread specific if requested.
sql/opt_range.cc:
Updated call to my_init_dynamic_array()
Updated call to init_sql_alloc()
Added MY_THREAD_SPECIFIC to allocated memory.
sql/opt_subselect.cc:
Updated call to init_sql_alloc() to mark memory thread specific.
sql/protocol.cc:
Fixed compiler warning
sql/records.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/rpl_filter.cc:
Updated call to my_init_dynamic_array()
sql/rpl_handler.cc:
Updated call to my_init_dynamic_array2()
sql/rpl_handler.h:
Updated call to init_sql_alloc()
sql/rpl_mi.cc:
Updated call to my_init_dynamic_array()
sql/rpl_tblmap.cc:
Updated call to init_alloc_root()
sql/rpl_utility.cc:
Updated call to my_init_dynamic_array()
sql/slave.cc:
Initialize things properly before calling functions that allocate memory.
Removed calls to net_end() as this is now done in ~THD()
sql/sp_head.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
Added parameter to warning_info() that it should be fully initialized.
sql/sp_pcontext.cc:
Updated call to my_init_dynamic_array()
sql/sql_acl.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_admin.cc:
Added parameter to warning_info() that it should be fully initialized.
sql/sql_analyse.h:
Updated call to init_tree() to mark memory thread specific.
sql/sql_array.h:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_audit.cc:
Updated call to my_init_dynamic_array()
sql/sql_base.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_cache.cc:
Updated comment
sql/sql_class.cc:
Added parameter to warning_info() that not initialize it until THD is fully created.
Updated call to init_sql_alloc()
Mark THD::user_vars has to be thread specific.
Updated call to my_init_dynamic_array()
Ensure that memory allocated by THD is assigned to the THD.
More DBUG
Always acll net_end() in ~THD()
Assert that all memory signed to this THD is really deleted at ~THD.
Fixed set_status_var_init() to not reset memory_used.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_class.h:
Added MY_THREAD_SPECIFIC to allocated memory.
Added malloc_size to THD to record allocated memory per THD.
sql/sql_delete.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_error.cc:
Added 'initialize' parameter to Warning_info() to say if should allocate memory for it's structures.
This is used by THD::THD() to not allocate memory until THD is ready.
Added Warning_info::free_memory()
sql/sql_error.h:
Updated Warning_info() class.
sql/sql_handler.cc:
Updated call to init_alloc_root() to mark memory thread specific.
sql/sql_insert.cc:
More DBUG
sql/sql_join_cache.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_lex.cc:
Updated call to my_init_dynamic_array()
sql/sql_lex.h:
Updated call to my_init_dynamic_array()
sql/sql_load.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_parse.cc:
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
Ensure that examined_row_count() is reset before query.
Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Don't restore thd->status_var.memory_used when restoring thd->status_var
sql/sql_plugin.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Don't allocate THD on the stack, as this causes problems with valgrind when doing thd memory counting.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_prepare.cc:
Added parameter to warning_info() that it should be fully initialized.
Updated call to init_sql_alloc() to mark memory thread specific.
sql/sql_reload.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_select.cc:
Updated call to my_init_dynamic_array() and init_sql_alloc() to mark memory thread specific.
Added MY_THREAD_SPECIFIC to allocated memory.
More DBUG
sql/sql_servers.cc:
Updated call to init_sql_alloc() to mark memory some memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_show.cc:
Updated call to my_init_dynamic_array()
Mark my_dir() memory thread specific.
Use my_pthread_setspecific_ptr(THR_THD,...) to mark that allocated memory should be allocated to calling thread.
More DBUG.
Added malloc_size and examined_row_count to SHOW PROCESSLIST.
Added MY_THREAD_SPECIFIC to allocated memory.
Updated call to init_sql_alloc()
Added parameter to warning_info() that it should be fully initialized.
sql/sql_statistics.cc:
Fixed compiler warning
sql/sql_string.cc:
String elements can now be marked as thread specific.
sql/sql_string.h:
String elements can now be marked as thread specific.
sql/sql_table.cc:
Updated call to init_sql_alloc() and my_malloc() to mark memory thread specific
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Fixed compiler warning
sql/sql_test.cc:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_trigger.cc:
Updated call to init_sql_alloc()
sql/sql_udf.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_update.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/table.cc:
Updated call to init_sql_alloc().
Mark memory used by temporary tables, that are not for slave threads, as MY_THREAD_SPECIFIC
Updated call to init_sql_alloc()
sql/thr_malloc.cc:
Added my_flags argument to init_sql_alloc() to be able to mark memory as MY_THREAD_SPECIFIC.
sql/thr_malloc.h:
Updated prototype for init_sql_alloc()
sql/tztime.cc:
Updated call to init_sql_alloc()
Updated call to init_alloc_root() to mark memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/uniques.cc:
Updated calls to init_tree(), my_init_dynamic_array() and my_malloc() to mark memory thread specific.
sql/unireg.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/csv/ha_tina.cc:
Updated call to init_alloc_root()
storage/federated/ha_federated.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Ensure that memory allocated by fedarated is registered for the system, not for the thread.
storage/federatedx/federatedx_io_mysql.cc:
Updated call to my_init_dynamic_array()
storage/federatedx/ha_federatedx.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
storage/heap/ha_heap.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/heap/heapdef.h:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_block.c:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_create.c:
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Use MY_TREE_WITH_DELETE instead of removed option 'with_delete'.
storage/heap/hp_open.c:
Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
storage/heap/hp_write.c:
Added new parameter to hp_get_new_block()
storage/maria/ma_bitmap.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_blockrec.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_check.c:
Updated call to init_alloc_root()
storage/maria/ma_ft_boolean_search.c:
Updated calls to init_tree() and init_alloc_root()
storage/maria/ma_ft_nlq_search.c:
Updated call to init_tree()
storage/maria/ma_ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/maria/ma_loghandler.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_open.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_sort.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_write.c:
Updated calls to my_init_dynamic_array() and init_tree()
storage/maria/maria_pack.c:
Updated call to init_tree()
storage/maria/unittest/sequence_storage.c:
Updated call to my_init_dynamic_array()
storage/myisam/ft_boolean_search.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_nlq_search.c:
Updated call to init_tree()
storage/myisam/ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_stopwords.c:
Updated call to init_tree()
storage/myisam/mi_check.c:
Updated call to init_alloc_root()
storage/myisam/mi_write.c:
Updated call to my_init_dynamic_array()
Updated call to init_tree()
storage/myisam/myisamlog.c:
Updated call to init_tree()
storage/myisam/myisampack.c:
Updated call to init_tree()
storage/myisam/sort.c:
Updated call to my_init_dynamic_array()
storage/myisammrg/ha_myisammrg.cc:
Updated call to init_sql_alloc()
storage/perfschema/pfs_check.cc:
Rest current_thd
storage/perfschema/pfs_instr.cc:
Removed DBUG_ENTER/DBUG_VOID_RETURN as at this point my_thread_var is not allocated anymore, which can cause problems.
support-files/compiler_warnings.supp:
Disable compiler warning from offsetof macro.
buf_page_get_gen(): Do not attempt to decompress a compressed-only
page when mode == BUF_PEEK_IF_IN_POOL. This mode is only being used by
btr_search_drop_page_hash_when_freed(). There cannot be any adaptive
hash index pointing to a page that does not exist in uncompressed
format in the buffer pool.
innodb_buffer_pool_evict_update(): New function for debug builds, to handle
SET GLOBAL innodb_buffer_pool_evicted='uncompressed'
by evicting all uncompressed page frames of compressed tablespaces
from the buffer pool.
rb#1873 approved by Jimmy Yang
The test, binlog.binlog_spurious_ddl_errors was failing on pb2 at the statement
"UNINSTALL PLUGIN example;" with this warning:
"Warning 1620 Plugin is busy and will be uninstalled on shutdown "
Fix
Spurious warnings occur in the test since we do not empty the Query cache,
used by the example plugin at the time of creating tables using the plugin.
Hence, the query chache is flushed before uninstalling the plugin.
Also, as part of running the test across platforms, the plugin installation
script is changed.
The original patch with the implementation of virtual columns
did not support INSERT DELAYED into tables with virtual columns.
This patch fixes the problem.
