- Fix that binlog_gtid_pos() (and hence slave connect) does not work
correctly in the very first binlog file (due to not logging empty
Gtid_list_log_event).
- Remove one instance of the stupid domain_id-0-is-implicit.
- Rename the confusing Gtid_Pos_Auto in SHOW SLAVE STATUS to Using_Gtid.
- Fix memory leak.
- Add first basic mysql-test-run test case which tests switch to new master
using MASTER_GTID_POS=AUTO.
- When we connect with GTID, do not use any old relay logs, as they may
contain the wrong events or be corrupt after crash.
- Fix old bug that fails replication if we receive a heartbeat event
immediately after an event was omitted in the stream from the master.
- Fix rpl_end to clear Gtid_Pos_Auto, to keep check_testcase happy.
PLATFORM= MACOSX10.6 X86_64 MAX
Problem: The test was failing on pb2's mac machine because
it was not cleaned up properly. The test checks if
the command 'start slave until' throws a proper
error when issued with a wrong number/type of
parameters. After this,the replication stream was
stopped using the include file 'rpl_end.inc'.
The errors thrown earlier left the slave in an
inconsistent state to be closed by the include
file which was caught by the mac machine.
Fix: Started slave by invoking start_slave.inc to have a
working slave before calling rpl_reset.inc
Problem: The test file was not in a good shape. It tested
start slave until relay log file/pos combination
wrongly. A couple of commands were executed at
master and replicated at slave. Next, the
coordinates in terms of relay log file and pos
were noted down followed by reset slave and start
slave until saved relay log file/pos. Reset slave
deletes all relay log files and makes the slave
forget its replication position. So, using the
saved coordiantes after reset slave is wrong.
Fix: Split the test in two parts:
a) Test for start slave until master log file/pos and
checking for correct errors in the failure
scenarios.
b) Test for start slave until relay log file/pos.
Problem: The variables auto_increment_increment and
auto_increment_offset were set in the the include
file rpl_init.inc. This was only configured for
some connections that are rarely used by test
cases, so likely that it will cause confusion.
If replication tests want to setup these variables
they should do so explicitly.
Fix:
a) Removed code to set the variables
auto_increment_increment and auto_increment_offset
in the include file.
b) Updated tests files using the same.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
The patch lifts the limitation of the current implementation
of ALTER TABLE that does not allow to build unique/primary
indexes by sort for MyISAM and Aria engines.
have_openssl variable was ON even when OpenSSL was not used (but YaSSL was).
fix that, so that have_openssl really corresponds to OpenSSL
rename not_openssl.inc to not_ssl.inc and fix the test accordingly.
With MDEV-532, the binlog_checkpoint event is logged asynchronously
from a binlog background thread. This causes some sporadic failures
in some test cases whose output depends on order of events in
binlog.
Fix using an include file that waits until the binlog checkpoint
event has been logged before proceeding with the test case.
revno: 3383
revision-id: georgi.kodinov@oracle.com-20110818083108-qa3h3ufqu4zne80a
committer: Georgi Kodinov <Georgi.Kodinov@Oracle.com>
timestamp: Thu 2011-08-18 11:31:08 +0300
message:
Bug #11766001: 59026: ALLOW MULTIPLE --PLUGIN-LOAD OPTIONS
Implemented support for a new command line option :
--plugin-load-add=<comma-separated-name-equals-value-list>
This option takes the same type of arguments that --plugin-load does
and complements --plugin-load (that continues to operate as before) by
appending its argument to the list specified by --plugin-load.
So --plugin-load can be considered a composite option consisting of
resetting the plugin load list and then calling --plugin-load-add to process
the argument.
Note that the order in which you specify --plugin-load and --plugin-load-add
is important : "--plugin-load=x --plugin-load-add=y" will be equivalent to
"--plugin-load=x,y" whereas "--plugin-load-add=y --plugin-load=x" will be
equivalent to "plugin-load=x".
Incompatible change : the --help --verbose command will no longer print the
--plugin-load variable's values (as it doesn't have one). Otherwise both --plugin-load
and --plugin-load-add are mentioned in it.
patch to fix post push falures in pb2
BUG#15872504 - REMOVE MYSQL-TEST/INCLUDE/GET_BINLOG_DUMP_THREAD_ID.INC
=== Problem ===
The file named "mysql-test/include/get_binlog_dump_thread_id.inc" is not
used anywhere. In any case, this file does wrong things in the wrong way:
1) The file seems to assume there is only one dump thread, but there may
be many.
2) you can get this information in a much easier way using the command:
"select thread_id from threads where processlist_command="Binlog Dump";"
=== Fix ===
removed file 'mysql-test/include/get_binlog_dump_thread_id.inc'
table_stat -> table_stats
column_stat -> column_stats
index_stat -> index_stats
to be in line with the names of innodb statistical tables
from mysql-5.6: innodb_table_stats and innodb_index_stats.
Use post_kill_notification in for one_thread_per_connection scheduler,
the same as already used in threadpool, to reliably wake a thread stuck in
read() or in different poll() variations.
DISABLE AND ENABLED DURING DDL OPERATION
PROBLEM: Same thread trying to acquire the same mutex
second time leads to hang/server crash.
While [un]installing audit_log plugin
a thread acquires the LOCK_plugin mutex
and after successful initialization tries
to write in mysql.plugin table. It holds
this mutex for a long time. If some how
plugin table is corrupted then a write to
plugin table will throw an error, thread try
to log this error in the audit_log plugin,
doing so it tries to acquire the mutex
again and results is server hang/crash.
SOLUTION: Releasing the LOCK_plugin mutex before
writing in mysql.plugin table. We dont
need to hold this mutex as thread already
acquired a TL_WRITE lock on mysql.plugin
table.
(and collateral changes)
mysql-test/t/innodb_mysql_lock.test:
change the variable from the test, not from the .opt file.
one mysqld restart less.
mysql-test/t/lowercase_table4.test:
fix dos line endings
sql/handler.cc:
don't access the uninitialized variable
main.mysqlbinlog_row_innodb are skipped by mtr
=== Problem ===
The following tests are wrongly placed in main suite and as a
result these are not run with proper binlog format combinations.
Some are always skipped by mtr.
1) mysqlbinlog_row_myisam
2) mysqlbinlog_row_innodb
3) mysqlbinlog_row.test
4) mysqlbinlog_row_trans.test
5) mysqlbinlog-cp932
6) mysqlbinlog2
7) mysqlbinlog_base64
=== Background ===
mtr runs the tests placed in main suite with binlog format=stmt.
Those that need to be tested against binlog format=row or mixed
or more than one binlog format and require only one mysql server
are placed in binlog suite. mtr runs tests in binlog suite with
all three binlog formats(stmt,row and mixed).
=== Fix ===
1) Moved the test listed in problem section above to binlog suite.
2) Added prefix "binlog_" to the name of each test case moved.
Renamed the coresponding result files and option files accordingly.
mysql-test/extra/binlog_tests/mysqlbinlog_row_engine.inc:
include file for mysqlbinlog_row_myisam.test and
mysqlbinlog_row_myisam.test which are being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog-cp932.result:
result file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog2.result:
result file for mysqlbinlog2.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_base64.result:
result file for mysqlbinlog_base64.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row.result:
result file for mysqlbinlog_row.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_innodb.result:
result file for mysqlbinlog_row_innodb.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_myisam.result:
result file for mysqlbinlog_row_myisam.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_trans.result:
result file for mysqlbinlog_row_trans.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932-master.opt:
option file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog2.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_base64.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_innodb.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_myisam.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_trans.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
Generalized support for auto-updated and/or auto-initialized timestamp
and datetime columns. This patch is a reimplementation of MySQL's
"WL#5874: CURRENT_TIMESTAMP as DEFAULT for DATETIME columns". In order to
ease future merges, this implementation reused few function and variable
names from MySQL's patch, however the implementation is quite different.
TODO:
The only unresolved problem in this patch is the semantics of LOAD DATA for
TIMESTAMP and DATETIME columns in the cases when there are missing or NULL
columns. I couldn't fully comprehend the logic behind MySQL's behavior and
its relationship with their own documentation, so I left the results to be
more consistent with all other LOAD cases.
The problematic test cases can be seen by running the test file function_defaults,
and observing the test case differences. Those were left on purpose for discussion.
mysql-test/suite/innodb/include/restart_and_reinit.inc:
drop and recreate mysql.innodb* tables when deleting innodb table spaces
mysql-test/t/ssl_8k_key-master.opt:
with loose- prefix ssl errors are ignored
sql-common/client.c:
compiler warnings
sql/field.cc:
use the new function
sql/item.cc:
don't convert time to double or decimal via longlong,
this loses sub-second part.
Use dedicated functions.
sql/item.h:
incorrect cast_to_int type for params
sql/item_strfunc.cc:
use the new function
sql/lex.h:
unused
sql/my_decimal.h:
helper macro
sql/sql_plugin.cc:
workaround for a compiler warning
sql/sql_yacc.yy:
unused
sql/transaction.cc:
fix the merge for SERVER_STATUS_IN_TRANS_READONLY protocol flag
storage/sphinx/CMakeLists.txt:
compiler warnings
