Additional patch to remove the part_id -> ref_buffer offset.
The partitioning id and the associate record buffer can
be found without having to calculate it.
By initializing it for each used partition, and then reuse
the key-buffer from the queue, it is not needed to have
such map.
Additional patch to remove the part_id -> ref_buffer offset.
The partitioning id and the associate record buffer can
be found without having to calculate it.
By initializing it for each used partition, and then reuse
the key-buffer from the queue, it is not needed to have
such map.
The buffer for the current read row from each partition
(m_ordered_rec_buffer) used for sorted reads was
allocated on open and freed when the ha_partition handler
was closed or destroyed.
For tables with many partitions and big records this could
take up too much valuable memory.
Solution is to only allocate the memory when it is needed
and free it when nolonger needed. I.e. allocate it in
index_init and free it in index_end (and to handle failures
also free it on reset, close etc.)
Also only allocating needed memory, according to
partitioning pruning.
Manually tested that it does not use as much memory and
releases it after queries.
The buffer for the current read row from each partition
(m_ordered_rec_buffer) used for sorted reads was
allocated on open and freed when the ha_partition handler
was closed or destroyed.
For tables with many partitions and big records this could
take up too much valuable memory.
Solution is to only allocate the memory when it is needed
and free it when nolonger needed. I.e. allocate it in
index_init and free it in index_end (and to handle failures
also free it on reset, close etc.)
Also only allocating needed memory, according to
partitioning pruning.
Manually tested that it does not use as much memory and
releases it after queries.
Now partition engine adds underlying tables to the QC and ask underlying tables engine permittion to cache the query and return result of the query.
Incorrect QC cleanup in case of table registration failure fixe.
Unified interface for myisammrg & partitioned engnes for QC.
There can be cases when the optimizer calls ha_partition::records_in_range
when there are no matching partitions. So the DBUG_ASSERT of
!tot_used_partitions does assert.
Fixed by returning 0 instead when no matching partitions are found.
This will avoid the crash. records_in_range will then try to find the
biggest used partition, which will not find any partition and
records_in_range will then return 0, meaning non rows can be found.
Patch contributed by Davi Arnaut at twitter.
There can be cases when the optimizer calls ha_partition::records_in_range
when there are no matching partitions. So the DBUG_ASSERT of
!tot_used_partitions does assert.
Fixed by returning 0 instead when no matching partitions are found.
This will avoid the crash. records_in_range will then try to find the
biggest used partition, which will not find any partition and
records_in_range will then return 0, meaning non rows can be found.
Patch contributed by Davi Arnaut at twitter.
Fixed failing tests in sys_vars as we have now stricter checking of setting of variables.
mysql-test/suite/sys_vars/r/innodb_adaptive_flushing_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_adaptive_hash_index_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_large_prefix_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_random_read_ahead_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_stats_on_metadata_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_strict_mode_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_support_xa_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/innodb_table_locks_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_master_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/r/rpl_semi_sync_slave_enabled_basic.result:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_flushing_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_adaptive_hash_index_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_large_prefix_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_random_read_ahead_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_stats_on_metadata_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_strict_mode_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_support_xa_basic.test:
One can now only assign 0 or 1 to boolean variables
mysql-test/suite/sys_vars/t/innodb_table_locks_basic.test:
One can now only assign 0 or 1 to boolean variables
mysys/my_getsystime.c:
Merge + fixed bug that __NR_clock_gettime didn't work in 5.5
The issue was that check/optimize/anaylze did not zerofill the table before they started to work on it.
Added one more element to not often used function handler::auto_repair() to allow handler to decide when to auto repair.
mysql-test/suite/maria/r/maria-autozerofill.result:
Test case for lp:944422
mysql-test/suite/maria/t/maria-autozerofill.test:
Test case for lp:944422
sql/ha_partition.cc:
Added argument to auto_repair()
sql/ha_partition.h:
Added argument to auto_repair()
sql/handler.h:
Added argument to auto_repair()
sql/table.cc:
Let auto_repair() decide which errors to trigger auto-repair
storage/archive/ha_archive.h:
Added argument to auto_repair()
storage/csv/ha_tina.h:
Added argument to auto_repair()
storage/maria/ha_maria.cc:
Give better error & warning messages for auto-repaired tables.
storage/maria/ha_maria.h:
Added argument to auto_repair()
Always auto-repair in case of moved table.
storage/maria/ma_open.c:
Remove special handling of HA_ERR_OLD_FILE (this is now handled in auto_repair())
storage/myisam/ha_myisam.h:
Added argument to auto_repair()
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
PARTITION STATISTICS
Problem was the fix for bug#11756867; It always used the first
partitions, and stopped after it checked 10 [sub]partitions.
(or until it found a partition which would contain a match).
This results in bad statistics for tables where the first 10 partitions
don't represent the majority of the data (like when the first 10
partitions only contained a few rows in total).
The solution was to take statisics from the partitions containing
the most rows instead:
Added an array of partition ids which is sorted by number of records
in descending order.
this array is used in records_in_range to cover as many records as
possible in as few calls as possible.
Also changed the limit of how many partitions to use for the statistics
from a static max of 10 partitions, into a dynamic model:
Maximum number of partitions is now log2(total number of partitions)
taken from the ordered array.
It will continue calling partitions records_in_range until it has
checked:
(total rows in matching partitions) * (maximum number of partitions)
/ (number of used partitions)
Also reverted the changes for ha_partition::scan_time() and
ha_partition::estimate_rows_upper_bound() to before
the fix of bug#11756867. Since they are not as slow as
records_in_range.
PARTITION STATISTICS
Problem was the fix for bug#11756867; It always used the first
partitions, and stopped after it checked 10 [sub]partitions.
(or until it found a partition which would contain a match).
This results in bad statistics for tables where the first 10 partitions
don't represent the majority of the data (like when the first 10
partitions only contained a few rows in total).
The solution was to take statisics from the partitions containing
the most rows instead:
Added an array of partition ids which is sorted by number of records
in descending order.
this array is used in records_in_range to cover as many records as
possible in as few calls as possible.
Also changed the limit of how many partitions to use for the statistics
from a static max of 10 partitions, into a dynamic model:
Maximum number of partitions is now log2(total number of partitions)
taken from the ordered array.
It will continue calling partitions records_in_range until it has
checked:
(total rows in matching partitions) * (maximum number of partitions)
/ (number of used partitions)
Also reverted the changes for ha_partition::scan_time() and
ha_partition::estimate_rows_upper_bound() to before
the fix of bug#11756867. Since they are not as slow as
records_in_range.
RESULT FROM PREVIOUS TRANSACTION
The current Query Cache API is not fully compatible with
the partitioning engine.
There is no good way to implement support for QC due to:
1) a static callback for ha_partition would need to have access
to all partition names and call the underlying callback for each
[sub]partition with the correct name.
2) pruning would be impossible, even if one used the ulonglong
engine_data due to if engine_data is changed, the table is
invalidated by the QC.
So the only viable solution to avoid incorrect data is to not allow
caching of queries using partitioned tables.
(There are some extra changes, due to removal of \r as line break)
RESULT FROM PREVIOUS TRANSACTION
The current Query Cache API is not fully compatible with
the partitioning engine.
There is no good way to implement support for QC due to:
1) a static callback for ha_partition would need to have access
to all partition names and call the underlying callback for each
[sub]partition with the correct name.
2) pruning would be impossible, even if one used the ulonglong
engine_data due to if engine_data is changed, the table is
invalidated by the QC.
So the only viable solution to avoid incorrect data is to not allow
caching of queries using partitioned tables.
(There are some extra changes, due to removal of \r as line break)
ALTER TABLE AFTER DROP PARTITION
Bug#13608188 - 64038: CRASH IN HANDLER::HA_THD ON ALTER TABLE AFTER
REPAIR NON-EXISTING PARTITION
Backport of bug#13357766 from -trunk to -5.5.
The state of some partitions was not reset on failure, leading
to invalid states of partitions in consequent statements.
Fixed by reverting back to original state for all partitions
if not all partition names was resolved.
Also adding extra security by forcing tables to be reopened
in case of error in mysql_alter_table.
(There is also removal of \r at the end of some lines.)
ALTER TABLE AFTER DROP PARTITION
Bug#13608188 - 64038: CRASH IN HANDLER::HA_THD ON ALTER TABLE AFTER
REPAIR NON-EXISTING PARTITION
Backport of bug#13357766 from -trunk to -5.5.
The state of some partitions was not reset on failure, leading
to invalid states of partitions in consequent statements.
Fixed by reverting back to original state for all partitions
if not all partition names was resolved.
Also adding extra security by forcing tables to be reopened
in case of error in mysql_alter_table.
(There is also removal of \r at the end of some lines.)
