set_item() uses 1UL << bit, so is_set_item() must do the same.
This fixes sporadic perfschema.show_aggregate failures
(sporadic, because `bit` is the thread id, so depending on how many
tests were run before perfschema.show_aggregate it can be above or
below 32).
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
MDEV-19486 and one more similar bug appeared because handler::write_row() interface
welcomes to modify buffer by storage engine. But callers are not ready for that
thus bugs are possible in future.
handler::write_row():
handler::ha_write_row(): make argument const
Some places didn't match the previous rules, making the Floor
address wrong.
Additional sed rules:
sed -i -e 's/Place.*Suite .*, Boston/Street, Fifth Floor, Boston/g'
sed -i -e 's/Suite .*, Boston/Fifth Floor, Boston/g'
Benefits of this patch:
- Removed a lot of calls to strlen(), especially for field_string
- Strings generated by parser are now const strings, less chance of
accidently changing a string
- Removed a lot of calls with LEX_STRING as parameter (changed to pointer)
- More uniform code
- Item::name_length was not kept up to date. Now fixed
- Several bugs found and fixed (Access to null pointers,
access of freed memory, wrong arguments to printf like functions)
- Removed a lot of casts from (const char*) to (char*)
Changes:
- This caused some ABI changes
- lex_string_set now uses LEX_CSTRING
- Some fucntions are now taking const char* instead of char*
- Create_field::change and after changed to LEX_CSTRING
- handler::connect_string, comment and engine_name() changed to LEX_CSTRING
- Checked printf() related calls to find bugs. Found and fixed several
errors in old code.
- A lot of changes from LEX_STRING to LEX_CSTRING, especially related to
parsing and events.
- Some changes from LEX_STRING and LEX_STRING & to LEX_CSTRING*
- Some changes for char* to const char*
- Added printf argument checking for my_snprintf()
- Introduced null_clex_str, star_clex_string, temp_lex_str to simplify
code
- Added item_empty_name and item_used_name to be able to distingush between
items that was given an empty name and items that was not given a name
This is used in sql_yacc.yy to know when to give an item a name.
- select table_name."*' is not anymore same as table_name.*
- removed not used function Item::rename()
- Added comparision of item->name_length before some calls to
my_strcasecmp() to speed up comparison
- Moved Item_sp_variable::make_field() from item.h to item.cc
- Some minimal code changes to avoid copying to const char *
- Fixed wrong error message in wsrep_mysql_parse()
- Fixed wrong code in find_field_in_natural_join() where real_item() was
set when it shouldn't
- ER_ERROR_ON_RENAME was used with extra arguments.
- Removed some (wrong) ER_OUTOFMEMORY, as alloc_root will already
give the error.
TODO:
- Check possible unsafe casts in plugin/auth_examples/qa_auth_interface.c
- Change code to not modify LEX_CSTRING for database name
(as part of lower_case_table_names)
This was done to make it clear that a update_row() should not change the
row.
This was not done for handler::write_row() as this function still needs
to update auto_increment values in the row. This should at some point
be moved to handler::ha_write_row() after which write_row can also have
const arguments.
including the big commit
commit 305130361bf72726de220f3d2b2787395e10be61
Author: Marc Alff <marc.alff@oracle.com>
Date: Tue Feb 10 11:31:32 2015 +0100
WL#8354 BACKPORT DIGEST IMPROVEMENTS TO MYSQL 5.6
(with the following commits) and related changes in sql/
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
Before this fix, the command
SHOW ENGINE PERFORMANCE_SCHEMA STATUS
could report wrong amount of memory allocated,
when the amount of memory used exceeds 4GB.
The problem is that size computations are not done using size_t,
so that overflows do occur, truncating the results.
This fix compute memory sizes properly with size_t.
Tested manually.
No test script provided, as the script would need to allocate too much
memory for the test.
and small collateral changes
mysql-test/lib/My/Test.pm:
somehow with "print" we get truncated writes sometimes
mysql-test/suite/perfschema/r/digest_table_full.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/dml_handler.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/information_schema.result:
host table is not ported over yet
mysql-test/suite/perfschema/r/nesting.result:
this differs, because we don't rewrite general log queries, and multi-statement
packets are logged as a one entry. this result file is identical to what mysql-5.6.5
produces with the --log-raw option.
mysql-test/suite/perfschema/r/relaylog.result:
MariaDB modifies the binlog index file directly, while MySQL 5.6 has a feature "crash-safe binlog index" and modifies a special "crash-safe" shadow copy of the index file and then moves it over. That's why this test shows "NONE" index file writes in MySQL and "MANY" in MariaDB.
mysql-test/suite/perfschema/r/server_init.result:
MariaDB initializes the "manager" resources from the "manager" thread, and starts this thread only when --flush-time is not 0. MySQL 5.6 initializes "manager" resources unconditionally on server startup.
mysql-test/suite/perfschema/r/stage_mdl_global.result:
this differs, because MariaDB disables query cache when query_cache_size=0. MySQL does not
do that, and this causes useless mutex locks and waits.
mysql-test/suite/perfschema/r/statement_digest.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_consumers.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/perfschema/r/statement_digest_long_query.result:
md5 hashes of statement digests differ, because yacc token codes are different in mariadb
mysql-test/suite/rpl/r/rpl_mixed_drop_create_temp_table.result:
will be updated to match 5.6 when alfranio.correia@oracle.com-20110512172919-c1b5kmum4h52g0ni and anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y are merged
mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result:
will be updated to match 5.6 when anders.song@greatopensource.com-20110105052107-zoab0bsf5a6xxk2y is merged
Before this fix, the output of SHOW ENGINE PERFORMANCE_SCHEMA STATUS
used uppercase to name performance schema tables.
This is inconsistent since performance schema tables have been renamed to lowercase.
Also, an old table 'PROCESSLIST' was still visible,
even after this table got renamed to 'threads'.
This fix:
- correctly uses lowercases in the output, to match the current naming.
- replaced 'PROCESSLIST' with 'threads'.
Tested the output of SHOW ENGINE PERFORMANCE_SCHEMA STATUS manually.
No automated test cases can be written for this,
since the output is too platform dependent (sizes).
This is a code cleanup.
The implementation of a storage engine (subclasses of handler) is not supposed
to call my_error() directly inside the engine implementation,
but only return error codes, and report errors later at the demand
of the sql layer only (if needed), using handler::print_error().
This fix removes misplaced calls to my_error(),
and provide an implementation of print_error() instead.
Given that the sql layer implementation of create table, ha_create_table(),
does not use print_error() but returns ER_CANT_CREATE_TABLE directly,
the return code for create table statements using the performance schema
has changed to ER_CANT_CREATE_TABLE.
Adjusted the test suite accordingly.
CHECKSUM TABLE for performance schema tables could cause uninitialized
memory reads.
The root cause is a design flaw in the implementation of
mysql_checksum_table(), which do not honor null fields.
However, fixing this bug in CHECKSUM TABLE is risky, as it can cause the
checksum value to change.
This fix implements a work around, to systematically reset fields values
even for null fields, so that the field memory representation is always
initialized with a known value.
