first step in moving drop table out of the handler.
todo: other methods that don't need an open table
for now hton->drop_table is optional, for backward compatibility
reasons
MDEV-22088 S3 partitioning support
All ALTER PARTITION commands should now work on S3 tables except
REBUILD PARTITION
TRUNCATE PARTITION
REORGANIZE PARTITION
In addition, PARTIONED S3 TABLES can also be replicated.
This is achived by storing the partition tables .frm and .par file on S3
for partitioned shared (S3) tables.
The discovery methods are enchanced by allowing engines that supports
discovery to also support of the partitioned tables .frm and .par file
Things in more detail
- The .frm and .par files of partitioned tables are stored in S3 and kept
in sync.
- Added hton callback create_partitioning_metadata to inform handler
that metadata for a partitoned file has changed
- Added back handler::discover_check_version() to be able to check if
a table's or a part table's definition has changed.
- Added handler::check_if_updates_are_ignored(). Needed for partitioning.
- Renamed rebind() -> rebind_psi(), as it was before.
- Changed CHF_xxx hadnler flags to an enum
- Changed some checks from using table->file->ht to use
table->file->partition_ht() to get discovery to work with partitioning.
- If TABLE_SHARE::init_from_binary_frm_image() fails, ensure that we
don't leave any .frm or .par files around.
- Fixed that writefrm() doesn't leave unusable .frm files around
- Appended extension to path for writefrm() to be able to reuse to function
for creating .par files.
- Added DBUG_PUSH("") to a a few functions that caused a lot of not
critical tracing.
Prototype change:
- virtual ha_rows records_in_range(uint inx, key_range *min_key,
- key_range *max_key)
+ virtual ha_rows records_in_range(uint inx, const key_range *min_key,
+ const key_range *max_key,
+ page_range *res)
The handler can ignore the page_range parameter. In the case the handler
updates the parameter, the optimizer can deduce the following:
- If previous range's last key is on the same block as next range's first
key
- If the current key range is in one block
- We can also assume that the first and last block read are cached!
This can be used for a better calculation of IO seeks when we
estimate the cost of a range index scan.
The parameter is fully implemented for MyISAM, Aria and InnoDB.
A separate patch will update handler::multi_range_read_info_const() to
take the benefits of this change and also remove the double
records_in_range() calls that are not anymore needed.
This was done to both simplify the code and also to be easier to handle
storage engines that are clustered on some other index than the primary
key.
As pk_is_clustering_key() and is_clustering_key now are using only
index_flags, these where removed from all storage engines.
- Note that some issues was also fixed in 10.2 and 10.4. I also fixed them
here to be able to continue with making 10.5 valgrind safe again
- Disable connection threads warnings when doing shutdown
The MDEV-20265 commit e746f451d5
introduces DBUG_ASSERT(right_op == r_tbl) in
st_select_lex::add_cross_joined_table(), and that assertion would
fail in several tests that exercise joins. That commit was skipped
in this merge, and a separate fix of MDEV-20265 will be necessary in 10.4.
MDEV-19486 and one more similar bug appeared because handler::write_row() interface
welcomes to modify buffer by storage engine. But callers are not ready for that
thus bugs are possible in future.
handler::write_row():
handler::ha_write_row(): make argument const
Reason for the change was that ha_notify_table_changed() was done
after table open when .frm had been replaced, which caused failure
in engines that checks on open if .frm matches the engines table
definition.
Other changes:
- Remove not needed open/close call at end of inline alter table.
Some test that depended on the table beeing in the table cache after
ALTER TABLE had to be updated.
Use thd_get_ha_data()/thd_set_ha_data() which protect against plugin
removal until it has THD ha_data.
Do not reset THD ha_data in mrn_close_connection(), cleaner approach
is to let ha_close_connection() do it.
Part of MDEV-19515 - Improve connect speed
The MDEV-17262 commit 26432e49d3
was skipped. In Galera 4, the implementation would seem to require
changes to the streaming replication.
In the tests archive.rnd_pos main.profiling, disable_ps_protocol
for SHOW STATUS and SHOW PROFILE commands until MDEV-18974
has been fixed.
There were two newly enabled warnings:
1. cast for a function pointers. Affected sql_analyse.h, mi_write.c
and ma_write.cc, mf_iocache-t.cc, mysqlbinlog.cc, encryption.cc, etc
2. memcpy/memset of nontrivial structures. Fixed as:
* the warning disabled for InnoDB
* TABLE, TABLE_SHARE, and TABLE_LIST got a new method reset() which
does the bzero(), which is safe for these classes, but any other
bzero() will still cause a warning
* Table_scope_and_contents_source_st uses `TABLE_LIST *` (trivial)
instead of `SQL_I_List<TABLE_LIST>` (not trivial) so it's safe to
bzero now.
* added casts in debug_sync.cc and sql_select.cc (for JOIN)
* move assignment method for MDL_request instead of memcpy()
* PARTIAL_INDEX_INTERSECT_INFO::init() instead of bzero()
* remove constructor from READ_RECORD() to make it trivial
* replace some memcpy() with c++ copy assignments
disable inplace alter for adding stored generated columns.
This fixes mroonga/storage.column_generated_stored_add_column failures
in ASAN_OPTIONS="abort_on_error=1" runs
Also, add a test case that shows the bug without ASAN.
This patch implements engine independent unique hash index.
Usage:- Unique HASH index can be created automatically for blob/varchar/test column whose key
length > handler->max_key_length()
or it can be explicitly specified.
Automatic Creation:-
Create TABLE t1 (a blob unique);
Explicit Creation:-
Create TABLE t1 (a int , unique(a) using HASH);
Internal KEY_PART Representations:-
Long unique key_info will have 2 representations.
(lets understand this with an example create table t1(a blob, b blob , unique(a, b)); )
1. User Given Representation:- key_info->key_part array will be similar to what user has defined.
So in case of example it will have 2 key_parts (a, b)
2. Storage Engine Representation:- In this case there will be only one key_part and it will point to
HASH_FIELD. This key_part will be always after user defined key_parts.
So:- User Given Representation [a] [b] [hash_key_part]
key_info->key_part ----^
Storage Engine Representation [a] [b] [hash_key_part]
key_info->key_part ------------^
Table->s->key_info will have User Given Representation, While table->key_info will have Storage Engine
Representation.Representation can be changed into each other by calling re/setup_keyinfo_hash function.
Working:-
1. So when user specifies HASH_INDEX or key_length is > handler->max_key_length(), In mysql_prepare_create_table
One extra vfield is added (for each long unique key). And key_info->algorithm is set to HA_KEY_ALG_LONG_HASH.
2. In init_from_binary_frm_image values for hash_keypart is set (like fieldnr , field and flags)
3. In parse_vcol_defs, HASH_FIELD->vcol_info is created. Item_func_hash is used with list of Item_fields,
When Explicit length is given by user then Item_left is used to concatenate Item_field values.
4. In ha_write_row/ha_update_row check_duplicate_long_entry_key is called which will create the hash key from
table->record[0] and then call ha_index_read_map , if we found duplicated hash , we will compare the result
field by field.
main.derived_cond_pushdown: Move all 10.3 tests to the end,
trim trailing white space, and add an "End of 10.3 tests" marker.
Add --sorted_result to tests where the ordering is not deterministic.
main.win_percentile: Add --sorted_result to tests where the
ordering is no longer deterministic.
Tests were failing because in TIME_from_longlong_datetime_packed() GCC8
at -O2 assumed that tmp is always positive and used mul and shr while it
used imul and sar at -O1 (where tests passed). GCC8 used multiplication
(by 0x4ec4ec4ec4ec4ec5) and shift to implement division by 13. It could
assume that tmp is always positive, because the function starts with
`if (tmp < 0) tmp= -tmp;`
But this assumption breaks if tmp=0x8000000000000000;
This is invalid value and TIME_from_longlong_datetime_packed() should
never see it, garbage in - garbage out.
It was getting this invalid value because mroonga tried to convert a
NULL key part to MYSQL_TIME. If the key part value is NULL, datetime2
value of it happens to be bzero-ed, which is invalid binary datetime2
value.
The correct behavior is not to try to interpret the key part value, if
it is marked as NULL. But this minimal fix only covers the datetime2 type.
