DEBUG_SYNC signals can get lost in certain tests due to later
DEBUG_SYNC commands overwriting them. This patch addresses
these issues in three tests: main.query_cache_debug,
main.partition_debug_sync, and
rpl.rpl_dump_request_retry_warning.
Additionally, main.partition_debug_sync needed changes to the
result file (the others did not). The synchronization happened
between two commands, one based on ALTER, the other on DROP.
A new thread/connection was needed to synchronize the DEBUG_SYNC
actions between these commands, thereby changing the result file.
Additional comments were added for clarification.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
The rpl.rpl_seconds_behind_master_spike test would sometimes
timeout or take a very long time to complete. This happened
because an MTR DEBUG_SYNC signal would be lost due to a
subsequent call to RESET. I.e., the slave SQL thread would
be paused due to the WAIT_FOR signal being lost, resulting in
either a failed test if the `select master_pos_wait` timeout
occurs first, or a very long run-time if the DBUG_SYNC timeout
occurs first.
The fix ensures that the MTR signal is processed by the slave
SQL thread before issuing the call to RESET
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
This patch addresses two problems with
rpl.rpl_seconds_behind_master_spike
First, --sync_slave_with_master / select master_pos_wait
seems to have a bug where it will hang after all master
events have been executed.
This patch removes the sync_slave_with_master command from
the test, where it not required anyway as it is used to
declare explicit cleanup
Second, the test uses timestamps to ensure that the
Seconds_Behind_Master value does not point to a time too
far in the past. The checks of these timestamps were
too strict, because they could be slightly inconsistent
with the master and the SBM would be counted as invalid
when it was actually correct.
To fix this, a slight buffer was added to the check
to ensure the value is valid but still does not point
too far in the past
Reviewed By:
===========
Andrei Elkin <andrei.elkin@mariadb.com>
The 10.5 version of the patch.
Removing DEFAULT from INFORMATION_SCHEMA columns.
DEFAULT in read-only tables is rather meaningless.
Upgrade should go smoothly.
Also fixes:
MDEV-20254 Problems with EMPTY_STRING_IS_NULL and I_S tables
Removing DEFAULT from INFORMATION_SCHEMA columns.
DEFAULT in read-only tables is rather meaningless.
Upgrade should go smoothly.
Also fixes:
MDEV-20254 Problems with EMPTY_STRING_IS_NULL and I_S tables
Problem:
========
A slave’s relay log format description event is used when
calculating Seconds_Behind_Master (SBM). This forces the SBM
value to spike when processing these events, as their creation
date is set to the timestamp that the IO thread begins.
Solution:
========
When the slave generates a format description event, mark the
event as a relay log event so it does not update the
rli->last_master_timestamp variable.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
Rows_log_event::do_apply_event(): Correct the mistake that was made in
the merge 5f8561a6bc.
In Galera, the query cache will be invalidated near the end
of the function.
When transaction creates or drops temporary tables and afterward its statement
faces an error even the transactional table statement's cached ROW
format events get involved into binlog and are visible after the transaction's commit.
Fixed with proper analysis of whether the errored-out statement needs
to be rolled back in binlog.
For instance a fact of already cached CREATE or DROP for temporary
tables by previous statements alone
does not cause to retain the being errored-out statement events in the
cache.
Conversely, if the statement creates or drops a temporary table
itself it can't be rolled back - this rule remains.
When transaction creates or drops temporary tables and afterward its statement
faces an error even the transactional table statement's cached ROW
format events get involved into binlog and are visible after the transaction's commit.
Fixed with proper analysis of whether the errored-out statement needs
to be rolled back in binlog.
For instance a fact of already cached CREATE or DROP for temporary
tables by previous statements alone
does not cause to retain the being errored-out statement events in the
cache.
Conversely, if the statement creates or drops a temporary table
itself it can't be rolled back - this rule remains.
Problem:
========
This patch addresses two issues.
First, if a CHANGE MASTER command is issued and an error happens
while locating the replica’s relay logs, the logs can be put into an
invalid state where future updates fail and future CHANGE MASTER
calls crash the server. More specifically, right before a replica
purges the relay logs (part of the `CHANGE MASTER TO` logic), the
relay log is temporarily closed with state LOG_TO_BE_OPENED. If the
server errors in-between the temporary log closure and purge, i.e.
during the function find_log_pos, the log should be closed.
MDEV-25284 reveals the log is not properly closed.
Second, upon issuing a RESET SLAVE ALL command, a slave’s GTID
filters are not cleared (DO_DOMAIN_IDS, IGNORE_DOMIAN_IDS,
IGNORE_SERVER_IDS). MySQL had a similar bug report, Bug #18816897,
which fixed this issue to clear IGNORE_SERVER_IDS after issuing
RESET SLAVE ALL in version 5.7.
Solution:
=========
To fix the first problem, the CHANGE MASTER error handling logic was
extended to transition the relay log state to LOG_CLOSED from
LOG_TO_BE_OPENED.
To fix the second problem, the RESET SLAVE ALL logic is extended to
clear the domain_id filter and ignore_server_ids.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
The purpose of non-exclusive locks in a transaction is to guarantee
that the records covered by those locks must remain in that way until
the transaction is committed. (The purpose of gap locks is to ensure
that a record that was nonexistent will remain that way.)
Once a transaction has reached the XA PREPARE state, the only allowed
further actions are XA ROLLBACK or XA COMMIT. Therefore, it can be
argued that only the exclusive locks that the XA PREPARE transaction
is holding are essential.
Furthermore, InnoDB never preserved explicit locks across server restart.
For XA PREPARE transations, we will only recover implicit exclusive locks
for records that had been modified.
Because of the fact that XA PREPARE followed by a server restart will
cause some locks to be lost, we might as well always release all
non-exclusive locks during the execution of an XA PREPARE statement.
lock_release_on_prepare(): Release non-exclusive locks on XA PREPARE.
trx_prepare(): Invoke lock_release_on_prepare() unless the
isolation level is SERIALIZABLE or this is an internal distributed
transaction with the binlog (not actual XA PREPARE statement).
This has been discussed with Sergei Golubchik and Andrei Elkin.
Reviewed by: Sergei Golubchik
Problem:
=======
In slave_parallel_mode=optimistic configuration, when admin commands and
DML operation on the same table are scheduled simultaneously for execution,
it results in lock conflict and slave server either hangs due to
deadlock or goes down with an assert.
Analysis:
========
Admin commands OPTIMIZE, REPAIR and ANALYZE are written to binary log as
ordinary transactions. When 'slave_parallel_mode' is 'optimistic' DMLs are
allowed to run in parallel. But these locks are not detected by parallel
replication deadlock detection-and-handling mechanism. At times they result
in deadlock or assertion.
Fix:
===
Flag admin commands as DDL in Gtid_log_event at the time of writing to
binary log. Add a new bit EXECUTED_TABLE_ADMIN_CMD to
'm_unsafe_rollback_flags'. During 'mysql_admin_table' command execution it
accepts a list of tables to be processed and executes them in a loop. Upon
successful execution enable 'EXECUTED_TABLE_ADMIN_CMD' bit in
thd->transaction.stmt_unsafe_rollback_flags. Gtid_log_event constructor
will notice this flag and mark the current transaction with 'FL_DDL' flag.
Gtid_log_events marked as FL_DDL will not be scheduled parallel execution,
on the slave. They will execute in isolation to prevent deadlocks.
Note: Removed the call to 'trans_commit_implicit' from 'mysql_admin_table'
function as 'mysql_execute_command' will take care of invoking
'trans_commit_implicit'.
Problem:- When slave is shutdown, we will get this assertion failure
sql/sql_list.h:642: void ilink::assert_linked(): Assertion `prev != 0
&& next != 0' failed.
Solution:- In close_connections when we call threads.get() it resets to
prev and next to NULL. And in parallel worker thread(handle_rpl_parallel_thread)
calls unlink_not_visible_thd() which assert on prev and next being not NULL.
.unlink_not_visible_thd() should be always called first before threads.get()
is called. To make sure worker calls unlink_not_visible_thd() in
slave_prepare_for_shutdown() we are deactivating the worker thread pool
which in turn will close all worker threads. Since this is already done in 10.4
and 10.5 I am backPorting MDEV-20821 and MDEV-22370 to 10.2. Mdev-22370
is improving the MDEV-20821 patch.
Parallel slave server shutdown found to be hanging in
close_connections() triggered by shutdown due to a slave worker thread
would not be notified to exit in case the worker was sitting idle.
Fixed with destroying the worker pool earlier that is in
slave_prepare_for_shutdown() when all their driver threads have already left.
A test file is added to simulate the bug condition as well as check
multi-sourced and not-idle worker cases.
