A few regression tests invoke heavy flushing of the buffer pool
and may trigger warnings that tablespaces could not be deleted
because of pending writes. Those warnings are to be expected
during the execution of such tests.
The warnings are also frequently seen with Valgrind or MemorySanitizer.
For those, the global suppression in have_innodb.inc does the trick.
- InnoDB fails to skip newly created column while checking for
change column when table is in redundant row format. This issue
is caused the MDEV-18035 (ccb1acbd3c)
Let us explicitly wait for purge before invoking a slow shutdown,
so that instrumented builds (such as ASAN or UBSAN) will not
exceed the 60-second timeout during shutdown.
MDEV-27025 allows to insert records before the record on which DELETE is
locked, as a result the DELETE misses those records, what causes serious ACID
violation.
Revert MDEV-27025, MDEV-27550. The test which shows the scenario of ACID
violation is added.
btr_cur_optimistic_insert(): Disregard DEBUG_DBUG injection to
invoke btr_page_reorganize() if the page (and the table) is empty.
Otherwise, an assertion would fail in btr_page_reorganize_low()
because PAGE_MAX_TRX_ID is 0 in an empty secondary index leaf page.
- Server incorrectly downgrading the MDL after prepare phase when
table is empty. mdl_exclusive_after_prepare is being set in
prepare phase only. But mdl_exclusive_after_prepare condition was
misplaced and checked before prepare phase by
commit d270525dfd and it is now
changed to check after prepare phase.
- main.innodb_mysql_sync test case was changed to avoid locking
optimization when table is empty.
Backported from 10.5 20e9e804c1 and
5948d7602e.
sel_restore_position_for_mysql() moves forward persistent cursor
position after btr_pcur_restore_position() call if cursor relative position
is BTR_PCUR_ON and the cursor points to the record with NOT the same field
values as in a stored record(and some other not important for this case
conditions).
It was done because btr_pcur_restore_position() sets
page_cur_mode_t mode to PAGE_CUR_LE for cursor->rel_pos == BTR_PCUR_ON
before opening cursor. So we are searching for the record less or equal
to stored one. And if the found record is not equal to stored one, then
it is less and we need to move cursor forward.
But there can be a situation when the stored record was purged, but the
new one with the same key but different value was inserted while
row_search_mvcc() was suspended. In this case, when the thread is
awaken, it will invoke sel_restore_position_for_mysql(), which, in turns,
invoke btr_pcur_restore_position(), which will return false because found
record don't match stored record, and
sel_restore_position_for_mysql() will move forward cursor position.
The above can lead to the case when awaken row_search_mvcc() do not see
records inserted by other transactions while it slept. The mtr test case
shows the example how it can be.
The fix is to return special value from persistent cursor restoring
function which would notify its caller that uniq fields of restored
record and stored record are the same, and in this case
sel_restore_position_for_mysql() don't move cursor forward.
Delete-marked records are correctly processed in row_search_mvcc().
Non-unique secondary indexes are "uniquified" by adding the PK, the
index->n_uniq should then be index->n_fields. So there is no need in
additional checks in the fix.
If transaction's readview can't see the changes made in secondary index
record, it requests clustered index record in row_search_mvcc() to check
its transaction id and get the correspondent record version. After this
row_search_mvcc() commits mtr to preserve clustered index latching
order, and starts mtr. Between those mtr commit and start secondary
index pages are unlatched, and purge has the ability to remove stored in
the cursor record, what causes rows duplication in result set for
non-locking reads, as cursor position is restored to the previously
visited record.
To solve this the changes are just switched off for non-locking reads,
it's quite simple solution, besides the changes don't make sense for
non-locking reads.
The more complex and effective from performance perspective solution is
to create mtr savepoint before clustered record requesting and rolling
back to that savepoint after that. See MDEV-27557.
One more solution is to have per-record transaction id for secondary
indexes. See MDEV-17598.
If any of those is implemented, just remove select_lock_type argument in
sel_restore_position_for_mysql().
convert_error_code_to_mysql(): Use the correct limit FK_MAX_CASCADE_DEL
in the error message. The DICT_FK_MAX_RECURSIVE_LOAD applies to
the number of foreign key constraints in table definitions,
not to the number of rows that are visited while processing
a foreign key constraint.
Some GNU/Linux distributions ship a zlib that is modified to use
the s390x DFLTCC instruction. That modification would essentially
redefine compressBound(sourceLen) as (sourceLen * 16 + 2308) / 8 + 6.
Let us relax the tests for InnoDB ROW_FORMAT=COMPRESSED to cope with
such a weaker compression guarantee.
create_table_info_t::row_size_is_acceptable(): Remove a bogus debug-only
assertion that would fail to hold for the test innodb_zip.bug36169.
The function page_zip_empty_size() may indeed return 0.
Post-push fix: remove unstable test.
The test was developed to find the reason of duplicated rows caused by
MDEV-20605 fix. The test is not necessary as the reason was found and
the bug was fixed.
sel_restore_position_for_mysql() moves forward persistent cursor
position after btr_pcur_restore_position() call if cursor relative position
is BTR_PCUR_ON and the cursor points to the record with NOT the same field
values as in a stored record(and some other not important for this case
conditions).
It was done because btr_pcur_restore_position() sets
page_cur_mode_t mode to PAGE_CUR_LE for cursor->rel_pos == BTR_PCUR_ON
before opening cursor. So we are searching for the record less or equal
to stored one. And if the found record is not equal to stored one, then
it is less and we need to move cursor forward.
But there can be a situation when the stored record was purged, but the
new one with the same key but different value was inserted while
row_search_mvcc() was suspended. In this case, when the thread is
awaken, it will invoke sel_restore_position_for_mysql(), which, in turns,
invoke btr_pcur_restore_position(), which will return false because found
record don't match stored record, and
sel_restore_position_for_mysql() will move forward cursor position.
The above can lead to the case when awaken row_search_mvcc() do not see
records inserted by other transactions while it slept. The mtr test case
shows the example how it can be.
The fix is to return special value from persistent cursor restoring
function which would notify its caller that uniq fields of restored
record and stored record are the same, and in this case
sel_restore_position_for_mysql() don't move cursor forward.
Delete-marked records are correctly processed in row_search_mvcc().
Non-unique secondary indexes are "uniquified" by adding the PK, the
index->n_uniq should then be index->n_fields. So there is no need in
additional checks in the fix.
If transaction's readview can't see the changes made in secondary index
record, it requests clustered index record in row_search_mvcc() to check
its transaction id and get the correspondent record version. After this
row_search_mvcc() commits mtr to preserve clustered index latching
order, and starts mtr. Between those mtr commit and start secondary
index pages are unlatched, and purge has the ability to remove stored in
the cursor record, what causes rows duplication in result set for
non-locking reads, as cursor position is restored to the previously
visited record.
To solve this the changes are just switched off for non-locking reads,
it's quite simple solution, besides the changes don't make sense for
non-locking reads.
The more complex and effective from performance perspective solution is
to create mtr savepoint before clustered record requesting and rolling
back to that savepoint after that. See MDEV-27557.
One more solution is to have per-record transaction id for secondary
indexes. See MDEV-17598.
If any of those is implemented, just remove select_lock_type argument in
sel_restore_position_for_mysql().
row_sel_sec_rec_is_for_clust_rec() treats empty BLOB prefix field in
secondary index as a field equal to any external BLOB field in clustered
index. Row_sel_get_clust_rec_for_mysql::operator() doesn't zerro out
clustered record pointer in row_search_mvcc(), and row_search_mvcc()
thinks that delete-marked secondary index record has visible for
"CHECK TABLE"'s read view old-versioned clustered index record, and
row_scan_index_for_mysql() counts it as a row.
The fix is to execute row_sel_sec_rec_is_for_blob() in
row_sel_sec_rec_is_for_clust_rec() if clustered field contains BLOB's
reference.
The aim of the InnoDB change buffer is to avoid delays when a leaf page
of a secondary index is not present in the buffer pool, and a record needs
to be inserted, delete-marked, or purged. Instead of reading the page into
the buffer pool for making such a modification, we may insert a record to
the change buffer (a special index tree in the InnoDB system tablespace).
The buffered changes are guaranteed to be merged if the index page
actually needs to be read later.
The change buffer could be useful when the database is stored on a
rotational medium (hard disk) where random seeks are slower than
sequential reads or writes.
Obviously, the change buffer will cause write amplification, due to
potentially large amount of metadata that is being written to the
change buffer. We will have to write redo log records for modifying
the change buffer tree as well as the user tablespace. Furthermore,
in the user tablespace, we must maintain a change buffer bitmap page
that uses 2 bits for estimating the amount of free space in pages,
and 1 bit to specify whether buffered changes exist. This bitmap needs
to be updated on every operation, which could reduce performance.
Even if the change buffer were free of bugs such as MDEV-24449
(potentially causing the corruption of any page in the system tablespace)
or MDEV-26977 (corruption of secondary indexes due to a currently
unknown reason), it will make diagnosis of other data corruption harder.
Because of all this, it is best to disable the change buffer by default.
cmp_data(): Compare different-length CHAR fields with
the new strnncollsp_nchars function that will pad spaces if needed.
Any InnoDB ROW_FORMAT except the original one that was named
ROW_FORMAT=REDUNDANT in MySQL 5.0.3 will internally store
CHAR(n) columns as variable-length if the character encoding is
variable length. Spaces may be trimmed from the end.
For NOT NULL values, the minimum length is always n*mbminlen.
In cmp_data() we only know the lengths in bytes and we cannot
easily know the ROW_FORMAT.
is_strnncoll_compatible(): Refactored from innobase_mysql_cmp().
innobase_mysql_cmp(): Merged to cmp_whole_field().
cmp_whole_field(): Invoke strnncollsp_nchars for the DATA_MYSQL
(the CHAR type with any other collation than latin1_swedish_ci).
Reviewed by: Alexander Barkov
Tested by: Roel Roel Van de Paar
The 10.5 version of the patch.
Removing DEFAULT from INFORMATION_SCHEMA columns.
DEFAULT in read-only tables is rather meaningless.
Upgrade should go smoothly.
Also fixes:
MDEV-20254 Problems with EMPTY_STRING_IS_NULL and I_S tables
Removing DEFAULT from INFORMATION_SCHEMA columns.
DEFAULT in read-only tables is rather meaningless.
Upgrade should go smoothly.
Also fixes:
MDEV-20254 Problems with EMPTY_STRING_IS_NULL and I_S tables
It's misleading to compare and write to user number of columns and fields.
Thus, it would be better to remove that check and let use see a subsequent
error message about missing or mispaced column.
row_import::match_schema(): remove misleading check
The InnoDB DATA DIRECTORY attribute is not implemented via
symbolic links but something similar, *.isl files that contain
the names of data files.
InnoDB failed to ignore the DATA DIRECTORY attribute even though
the server was started with --skip-symbolic-links.
Native ALTER TABLE in InnoDB will retain the DATA DIRECTORY attribute
of the table, no matter if the table will be rebuilt or not.
Generic ALTER TABLE (with ALGORITHM=COPY) as well as TRUNCATE TABLE
will discard the DATA DIRECTORY attribute.
All tests have been run with and without the ./mtr option
--mysqld=--skip-symbolic-links
and some tests that use the InnoDB DATA DIRECTORY attribute
have been adjusted for this.
Problem:
=======
InnoDB ran out of memory during recovery and it fails to
flush the dirty LRU blocks. The reason is that buffer pool
can ran out before the LRU list length reaches
BUF_LRU_OLD_MIN_LEN(256) threshold.
Fix:
====
During recovery, InnoDB should write out and evict all
dirty blocks.
.. to be the same as startup.
In resolving MDEV-27461, BUF_LRU_MIN_LEN (256) is the minimum number of
pages for the innodb buffer pool size. Obviously we need more than just
flushing pages. Taking the 16k page size and its default minimum, an
extra 25% is needed on top of the flushing pages to make a workable buffer
pool.
The minimum innodb_buffer_pool_chunk_size (1M) restricts the minimum
otherwise we'd have a pool made up of different chunk sizes.
The resulting minimum innodb buffer pool sizes are:
Page Size, Previously minimum (startup), with change.
4k 5M 2M
8k 5M 3M
16k 5M 5M
32k 24M 10M
64k 24M 20M
With this patch, SET GLOBAL innodb_buffer_pool_size minimums are
enforced.
The evident minimum system variable size for innodb_buffer_pool_size
is 2M, however this is only setable if using 4k page size. As
the order of the page_size and buffer_pool_size aren't fixed, we can't
hide this change.
Subsequent changes:
* innodb_buffer_pool_resize_with_chunks.test - raised of pool resize due to new
minimums. Chunk size also needed increase as the test was for
pool_size < chunk_size to generate a warning.
* Removed srv_buf_pool_min_size and replaced use with MYSQL_SYSVAR_NAME(buffer_pool_size).min_val
* Removed srv_buf_pool_def_size and replaced constant defination in
MYSQL_SYSVAR_LONGLONG(buffer_pool_size)
* Reordered ha_innodb to allow for direct use of MYSQL_SYSVAR_NAME(buffer_pool_size).min_val
* Moved buf_pool_size_align into ha_innodb to access to MYSQL_SYSVAR_NAME(buffer_pool_size).min_val
* loose-innodb_disable_resize_buffer_pool_debug is needed in the
innodb.restart.opt test so that under debug mode, resizing of the
innodb buffer pool can occur.
The code was backported from 10.6 bd03c0e516
commit. See that commit message for details.
Apart from the above commit trx_lock_t::wait_trx was also backported from
MDEV-24738. trx_lock_t::wait_trx is protected with lock_sys.wait_mutex
in 10.6, but that mutex was implemented only in MDEV-24789. As there is no
need to backport MDEV-24789 for MDEV-27025,
trx_lock_t::wait_trx is protected with the same mutexes as
trx_lock_t::wait_lock.
This fix should not break innodb-lock-schedule-algorithm=VATS. This
algorithm uses an Eldest-Transaction-First (ETF) heuristic, which prefers
older transactions over new ones. In this fix we just insert granted lock
just before the last granted lock of the same transaction, what does not
change transactions execution order.
The changes in lock_rec_create_low() should not break Galera Cluster,
there is a big "if" branch for WSREP. This branch is necessary to provide
the correct transactions execution order, and should not be changed for
the current bug fix.
The column INFORMATION_SCHEMA.INNODB_LOCKS.LOCK_DATA
would report NULL when the page that contains the locked
record does not reside in the buffer pool.
Pages may be evicted from the buffer pool due to some background
activity, such as the purge of transaction history loading
undo log pages to the buffer pool. The regression tests intentionally
run with a small buffer pool size setting.
To prevent the intermittent test failures, we will filter out the
contents of the LOCK_DATA column from the output.
