MDEV-13851 Always check table options in ALTER TABLE…ALGORITHM=INPLACE
In the merge of MySQL 5.7.9 to MariaDB 10.2.2, some code was included
that prevents ADD SPATIAL INDEX from being executed with ALGORITHM=INPLACE.
Also, the constant ADD_SPATIAL_INDEX was introduced as an alias
to ADD_INDEX. We will remove that alias now, and properly implement
the same ADD SPATIAL INDEX restrictions as MySQL 5.7 does:
1. table-rebuilding operations are not allowed if SPATIAL INDEX survive it
2. ALTER TABLE…ADD SPATIAL INDEX…LOCK=NONE is not allowed
ha_innobase::prepare_inplace_alter_table(): If the ALTER TABLE
requires actions within InnoDB, enforce the table options (MDEV-13851).
In this way, we will keep denying ADD SPATIAL INDEX for tables
that use encryption (MDEV-11974), even if ALGORITHM=INPLACE is used.
The InnoDB purge subsystem can be best stopped by opening a read view,
for example by START TRANSACTION WITH CONSISTENT SNAPSHOT.
To ensure that everything is purged, use wait_all_purged.inc,
which waits for the History list length in SHOW ENGINE INNODB STATUS
to reach 0. Setting innodb_purge_run_now never guaranteed this.
Always read full page 0 to determine does tablespace contain
encryption metadata. Tablespaces that are page compressed or
page compressed and encrypted do not compare checksum as
it does not exists. For encrypted tables use checksum
verification written for encrypted tables and normal tables
use normal method.
buf_page_is_checksum_valid_crc32
buf_page_is_checksum_valid_innodb
buf_page_is_checksum_valid_none
Modify Innochecksum logging to file to avoid compilation
warnings.
fil0crypt.cc fil0crypt.h
Modify to be able to use in innochecksum compilation and
move fil_space_verify_crypt_checksum to end of the file.
Add innochecksum logging to file.
univ.i
Add innochecksum strict_verify, log_file and cur_page_num
variables as extern.
page_zip_verify_checksum
Add innochecksum logging to file and remove unnecessary code.
innochecksum.cc
Lot of changes most notable able to read encryption
metadata from page 0 of the tablespace.
Added test case where we corrupt intentionally
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION (encryption key version)
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION+4 (post encryption checksum)
FIL_DATA+10 (data)
Rewrite the test encryption.innodb-checksum-algorithm not to
require any restarts or re-bootstrapping, and to cover all
innodb_page_size combinations.
Test innodb.101_compatibility with all innodb_page_size combinations.
innodb_page_size_small: A new set of combinations, for
innodb_page_size up to 16k. In MariaDB 10.0, this does not
make a difference, but in 10.1 and later, innodb_page_size
would cover 32k and 64k, for which ROW_FORMAT=COMPRESSED
is not available.
Enable these combinations in a few InnoDB tests.
This bug was introduced in the fix of MDEV-12123, which invoked
page_zip_write_header() in the wrong way.
page_zip_write_header(): Assert that the length is not zero, to
be compatible with page_zip_parse_write_header().
btr_root_raise_and_insert(): Update the uncompressed page and then
invoke page_zip_write_header() with the correct length.
to tables in the system tablespace
This is a regression caused by MDEV-11585, which accidentally
changed Tablespace::is_undo_tablespace() in an incorrect way,
causing the InnoDB system tablespace to be reported as a dedicated
undo tablespace, for which the change buffer is not applicable.
Tablespace::is_undo_tablespace(): Remove. There were only 2
calls from the function buf_page_io_complete(). Replace those
calls as appropriate.
Also, merge changes to tablespace import/export tests from
MySQL 5.7, and clean up the tests a little further, allowing
them to be run with any innodb_page_size.
Remove duplicated error injection instrumentation for the
import/export tests. In MySQL 5.7, the error injection label
buf_page_is_corrupt_failure was renamed to
buf_page_import_corrupt_failure.
fil_space_extend_must_retry(): Correct a debug assertion
(tablespaces can be extended during IMPORT), and remove a
TODO comment about compressed temporary tables that was
already addressed in MDEV-11816.
dict_build_tablespace_for_table(): Correct a comment that
no longer holds after MDEV-11816, and assert that
ROW_FORMAT=COMPRESSED can only be used in .ibd files.
As noted in MDEV-11947, we should disable the InnoDB doublewrite buffer
during the tests, because when rewriting page checksums, innochecksum
would skip the pages that are in the doublewrite buffer area. Because
the doublewrite buffer is emptied on server startup and not shutdown,
we should initially start with the doublewrite buffer disabled, so that
there will be no warning messages for wrong page checksums in the
doublewrite buffer.
Also, correct the obvious typo where restart_options should have been
$restart_parameters, so that InnoDB is actually verifying that the
checksums were rewritten.
innodb_file_format=Barracuda is the default in MariaDB 10.2.
Do not set it, because the option will be removed in MariaDB 10.3.
Also, do not set innodb_file_per_table=1 because it is the default.
Note that MDEV-11828 should fix the test innodb.innodb-64k
already in 10.1.
When MySQL 5.7.9 (and MariaDB Server 10.2) introduced
innodb_default_row_format and made ROW_FORMAT=DYNAMIC the default,
it became possible to create any ROW_FORMAT tables in the InnoDB
system tablespace, except ROW_FORMAT=COMPRESSED.
In MySQL 5.7, it is possible to create ROW_FORMAT=DYNAMIC
tables when TABLESPACE=innodb_system is explicitly specified.
Because MariaDB Server 10.2 does not support the MySQL 5.7
TABLESPACE=innodb_system attribute for tables, we should allow
ROW_FORMAT=DYNAMIC when innodb_file_per_table=0.
Also, remove the test innodb_zip.innodb-create-options, which was
an outdated copy of innodb_zip.create_options.
MySQL 5.7 allows temporary tables to be created in ROW_FORMAT=COMPRESSED.
The usefulness of this is questionable. WL#7899 in MySQL 8.0.0
prevents the creation of such compressed tables, so that all InnoDB
temporary tables will be located inside the predefined
InnoDB temporary tablespace.
Pick up and adjust some tests from MySQL 5.7 and 8.0.
dict_tf_to_fsp_flags(): Remove the parameter is_temp.
fsp_flags_init(): Remove the parameter is_temporary.
row_mysql_drop_temp_tables(): Remove. There cannot be any temporary
tables in InnoDB. (This never removed #sql* tables in the datadir
which were created by DDL.)
dict_table_t::dir_path_of_temp_table: Remove.
create_table_info_t::m_temp_path: Remove.
create_table_info_t::create_options_are_invalid(): Do not allow
ROW_FORMAT=COMPRESSED or KEY_BLOCK_SIZE for temporary tables.
create_table_info_t::innobase_table_flags(): Do not unnecessarily
prevent CREATE TEMPORARY TABLE with SPATIAL INDEX.
(MySQL 5.7 does allow this.)
fil_space_belongs_in_lru(): The only FIL_TYPE_TEMPORARY tablespace
is never subjected to closing least-recently-used files.
MySQL 5.7 introduced WL#7943: InnoDB: Implement Information_Schema.Files
to provide a long-term alternative for accessing tablespace metadata.
The INFORMATION_SCHEMA.INNODB_* views are considered internal interfaces
that are subject to change or removal between releases. So, users should
refer to I_S.FILES instead of I_S.INNODB_SYS_TABLESPACES to fetch metadata
about CREATE TABLESPACE.
Because MariaDB 10.2 does not support CREATE TABLESPACE or
CREATE TABLE…TABLESPACE for InnoDB, it does not make sense to support
I_S.FILES either. So, let MariaDB 10.2 omit the code that was added in
MySQL 5.7. After this change, I_S.FILES will report the empty result,
unless some other storage engine in MariaDB 10.2 implements the interface.
(The I_S.FILES interface was originally created for the NDB Cluster.)
- Fixed compiler warnings
- Removed have_debug.inc from innochecksum_3
- Fixed race condition in innodb_buffer_pool_load
- Fixed merge issue in innodb-bad-key-change.test
- Fixed missing array allocation that could cause
function_defaults_notembedded to fail
- Fixed thread_cache_size_func
Contains also:
MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE || m_lock_type != 2' failed. (branch bb-10.2-jan)
Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
enable tests that were fixed in MDEV-10549
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables
Contains also
MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7
The failure happened because 5.7 has changed the signature of
the bool handler::primary_key_is_clustered() const
virtual function ("const" was added). InnoDB was using the old
signature which caused the function not to be used.
MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7
Fixed mutexing problem on lock_trx_handle_wait. Note that
rpl_parallel and rpl_optimistic_parallel tests still
fail.
MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan)
Reason: incorrect merge
MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan)
Reason: incorrect merge
Fix :
-------
Created separate suites called innodb_zip ans i_innodb_zip that contain all compression tests.
Running the new suites with following compression-related parameters :
* innodb_compression_level = {1/9}
* innodb_log_compressed_pages = {ON/OFF}
