There is an optimization of DISTINCT in JOIN::optimize()
which depends on THD::used_tables value. Each SELECT statement
inside SP resets used_tables value(see mysql_select()) and it
leads to wrong result. The fix is to replace THD::used_tables
with LEX::used_tables.
The problem is that TIME_FUZZY_DATE is explicitly used for get_arg0_date()
function in Item_date_typecast::get_date method. The fix is to use real
fuzzy_date value.
WITH UTF32
The 5.5 version of the UTF32 collation was not enforcing the BMP range that
it currently supports when comparing with LIKE.
Fixed by backporting the checks for the BMP from trunk.
Added a named constant for the maximum character that can have a weight
in the weight table.
SHOW ALL PROBLEMS FOR MERGE TABLE COMPLIANCE IN 5.1".
The problem was that CHECK/REPAIR TABLE for a MERGE table which
had several children missing or in wrong engine reported only
issue with the first such table in its result-set. While in 5.0
this statement returned the whole list of problematic tables.
Ability to report problems for all children was lost during
significant refactorings of MERGE code which were done as part
of work on 5.1 and 5.5 releases.
This patch restores status quo ante refactorings by changing
code in such a way that:
1) Failure to open child table due to its absence during CHECK/
REPAIR TABLE for a MERGE table is not reported immediately
when its absence is discovered in open_tables(). Instead
handling/error reporting in such a situation is postponed
until the moment when children are attached.
2) Code performing attaching of children no longer stops when
it encounters first problem with one of the children during
CHECK/REPAIR TABLE. Instead it continues iteration through
the child list until all problems caused by child absence/
wrong engine are reported.
Note that even after this change problem with mismatch of
child/parent definition won't be reported if there is also
another child missing, but this is how it was in 5.0 as well.
Patch fixes an issue with reading basedir on Windows. It fixes how
the code interprets opt_basedir on Windows by adding the correct
path separators and quotes for paths with spaces.
BUG#12664302 : mysql_plugin cannot recognize the plugin config file
Patch fixes an issue with reading a plugin config file. It adds
more information to the error messages to ensure the user is
using the options correctly. Also deals with paths with spacs on
Windows.
This patch adds a new client utility that enables or disables plugin
features. The utility disables or enables a plugin using values (name,
soname, and symbols) provided via a configuration file by the same name.
For example, to ENABLE the daemon_example plugin, the utility will read
the daemon_example.ini configuration file and use the values contained to
enable or disable the plugin.
Turns out the DBUG_ASSERT added by fix for Bug#11792200 was overly pessimistic:
'stop0' is used in the main loop of do_div_mod, but we only dereference 'buf0'
for div operations, not for mod.
non-latin1 server error message
The problem was a one byte buffer overflow in the conversion
of a error message between character sets. Ahead of explaining
the problem further, some background information. Before an
error message is sent to the user, the message is converted
to the character set specified in the character_set_results
variable. For various reasons, this conversion might cause
the message to increase in length -- for example, if certain
characters can't be represented in the result character set.
If the final message length is greater than the maximum allowed
length of a error message (MYSQL_ERRMSG_SIZE), the message
is truncated. The message is also always null-terminated
regardless of the character set. The problem arises from this
null-termination. If a message length reached the maximum,
the terminating null character would be placed one byte past
the end of the message buffer.
The solution is to reserve the end of the message buffer for
the null character.
When CREATE TABLE wasn't given ENGINE=... it would determine
the default ENGINE at parse-time rather than at execution
time, leading to incorrect behaviour (namely, later changes
to the default engine being ignore) when calling CREATE TABLE
from a stored procedure.
We now defer working out the default engine till execution of
CREATE TABLE.
We must allocate a larger ref_pointer_array. We failed to account for extra
items allocated here:
#0 find_order_in_list
uint el= all_fields.elements;
all_fields.push_front(order_item); /* Add new field to field list. */
ref_pointer_array[el]= order_item;
order->item= ref_pointer_array + el;
#1 setup_order
#2 setup_without_group
#3 JOIN::prepare
OLD VALUE OF INPUT PARAMETER.
The user-visible problem was that CASE-control-flow function
(not CASE-statement) misbehaved in stored routines under some
circumstances. The problem resulted in a crash or wrong data
returned. The error happened when expressions in CASE-function
were not of the same character set.
A CASE-function should return values of the same character set
for all branches. Internally, that means a new Item-instance
for the CONVERT(... USING <some charset>)-function is added
to the item tree when needed. The problem was that such changes
were not properly recorded using THD::change_item_tree(),
thus dangling pointers remain in the item tree after
THD::rollback_item_tree_changes(), which lead to undefined
behavior (i.e. crash / wrong data) for subsequent executions of
the stored routine.
This bug was introduced by a patch for Bug 11753363
(44793 - CHARACTER SETS: CASE CLAUSE, UCS2 OR UTF32, FAILURE).
The fixed function is Item_func_case::fix_length_and_dec().
New CONVERT-items are added in agg_item_set_converter(),
which calls THD::change_item_tree().
The problem was that an intermediate array was passed
to agg_item_set_converter(). Thus, THD::change_item_tree() there
was called on intermediate objects.
Note: those intermediate objects are allocated on THD's
memory root, so it's Ok to put them into "changed item lists".
The fix is to track changes on the correct objects.
UPDATED TWICE
For multi update it is not allowed to update a column
of a table if that table is accessed through multiple aliases
and either
1) the updated column is used as partitioning key
2) the updated column is part of the primary key
and the primary key is clustered
This check is done in unsafe_key_update().
The bug was that for case 2), it was checked whether
updated_column_number == table_share->primary_key
However, the primary_key variable is the index number of the
primary key, not a column number.
Prior to this bugfix, the first column was wrongly believed to be
the primary key. The columns covered by an index is found in
table->key_info[idx_number]->key_part. The bugfix is to check if
any of the columns in the keyparts of the primary key are
updated.
The user-visible effect is that for storage engines with
clustered primary key (e.g. InnoDB but not MyISAM) queries
like
"UPDATE t1 AS A JOIN t2 AS B SET A.primkey=..."
will now error with
"ERROR HY000: Primary key/partition key update is not allowed
since the table is updated both as 'A' and 'B'."
instead of
"ERROR 1032 (HY000): Can't find record in 't1_tb'"
even if primkey is not the first column in the table. This
was the intended behavior of bugfix 11764529.
Issue:
When libmysqld/example/mysql_embedded is executed, it was getting abort. Its a
regression as it was working in 5.1 and failed in 5.5. Issue is there because
remaining_argc/remaining_argv were not getting assigned correctly in
init_embedded_server() which were being used later in init_common_variable().
Solution:
Rectified code to pass correct argc/argv to be used in init_common_variable().
This test case was failing on 5.5 and trunk for two reasons.
1) It waited for the "Waiting for table level lock" process
state while this state was renamed "Waiting for table
metadata lock" with the introduction of MDL in 5.5.
2) SET GLOBAL query_cache_size= 100000; gave a warning since
query_cache_size is supposed to be multiples of 1024.
This patch fixes these two issues and re-enables the test case.
RESULT CONSISTED OF MORE THAN ONE ROW
MySQL converts incorrect DATEs and DATETIMEs to '0000-00-00' on
insertion by default. This means that this sequence is possible:
CREATE TABLE t1(date_notnull DATE NOT NULL);
INSERT INTO t1 values (NULL);
SELECT * FROM t1;
0000-00-00
At the same time, ODBC drivers do not (or at least did not in the
90's) understand the DATE and DATETIME value '0000-00-00'. Thus,
to be able to query for the value 0000-00-00 it was decided in
MySQL 4.x (or maybe even before that) that for the special case
of DATE/DATETIME NOT NULL columns, the query "SELECT ... WHERE
date_notnull IS NULL" should return rows with date_notnull ==
'0000-00-00'. This is documented misbehavior that we do not want
to change.
The hack used to make MySQL return these rows is to convert
"date_notnull IS NULL" to "date_notnull = 0". This is, however,
only done if the table date_notnull belongs to is not an inner
table of an outer join. The rationale for this seems to be that
if there is no join match for the row in the outer table,
null-complemented rows would otherwise not be returned because
the null-complemented DATE value is actually NULL. On the other
hand, this means that the "return rows with 0000-00-00 when the
query asks for IS NULL"-hack is not in effect for outer joins.
In this bug, we have a LEFT JOIN that does not misbehave like
the documentation says it should. The fix is to rewrite
"date_notnull IS NULL" to "date_notnull IS NULL OR
date_notnull = 0"
if dealing with an OUTER JOIN, otherwise
"date_notnull IS NULL" to "date_notnull = 0"
as was done before.
Note:
The bug was originally reported as different result on first
and second execution of SP. The reason was that during first
execution the query was correctly rewritten to an inner join
due to a null-rejecting predicate. On second execution the
"IS NULL" -> "= 0" rewrite was done because there was no outer
join. The real problem, though, was incorrect date/datetime
IS NULL handling for OUTER JOINs.
SYNTAX TRIGGERS IN ANY WAY
Table with triggers which were using deprecated (5.0-only) syntax became
unavailable for any DML and DDL after upgrade to 5.1 version of server.
Attempt to execute any statement on such a table resulted in parsing
error reported. Since this included DROP TRIGGER and DROP TABLE
statements (actually, the latter was allowed but was not functioning
properly for such tables) it was impossible to fix the problem without
manual operations on .TRG and .TRN files in data directory.
The problem was that failure to parse trigger body (due to 5.0-only
syntax) when opening trigger file for a table prevented the table
from being open. This made all operations on the table impossible
(except DROP TABLE which due to peculiarity in its implementation
dropped the table but left trigger files around).
This patch solves this problem by silencing error which occurs when
we parse trigger body during table open. Error message is preserved
for the future use and table is marked as having a broken trigger.
We also try to analyze parse tree to recover trigger name, which
will be needed in order to drop the broken trigger. DML statements
which invoke triggers on the table marked as having broken trigger
are prohibited and emit saved error message. The same happens for
DDL which change triggers except DROP TRIGGER and DROP TABLE which
try their best to do what was requested. Table becomes no longer
marked as having broken trigger when last such trigger is dropped.
