subquery in the select list
When a dependent subquery with count(distinct <col>) was
evaluated multiple times, the Distinct_Aggregator was reused.
However, the Aggregator was not reset, so when the subquery was
evaluated for the next record in the outer select, old dependent
info was used.
The fix is to clear() the existing aggregator in
Item_sum::set_aggregator(). This ensures that the aggregator is
reevaluated with the new dependent information.
In statement-based or mixed-mode replication, use DROP TEMPORARY TABLE
to drop multiple tables causes different errors on master and slave,
when one or more of these tables do not exist. Because when executed
on slave, it would automatically add IF EXISTS to the query to ignore
all ER_BAD_TABLE_ERROR errors.
To fix the problem, do not add IF EXISTS when executing DROP TEMPORARY
TABLE on the slave, and clear the ER_BAD_TABLE_ERROR error after
execution if the query does not expect any errors.
This change is supposed to reduce number of ER_LOCK_DEADLOCK
errors which occur when multi-statement transaction encounters
conflicting metadata lock in cases when waiting is possible.
The idea is not to fail ER_LOCK_DEADLOCK error immediately when
we encounter conflicting metadata lock. Instead we release all
metadata locks acquired by current statement and start to wait
until conflicting lock go away. To avoid deadlocks we use simple
empiric which aborts waiting with ER_LOCK_DEADLOCK error if it
turns out that somebody is waiting for metadata locks owned by
this transaction.
This patch also fixes bug #46273 "MySQL 5.4.4 new MDL: Bug#989
is not fully fixed in case of ALTER".
The bug was that concurrent execution of UPDATE or MULTI-UPDATE
statement as a part of multi-statement transaction that already
has used table being updated and ALTER TABLE statement might have
resulted of loss of isolation between this transaction and ALTER
TABLE statement, which manifested itself as changes performed by
ALTER TABLE becoming visible in transaction and wrong binary log
order as a consequence.
This problem occurred when UPDATE or MULTI-UPDATE's wait in
mysql_lock_tables() call was aborted due to metadata lock
upgrade performed by concurrent ALTER TABLE. After such abort all
metadata locks held by transaction were released but transaction
silently continued to be executed as if nothing has happened.
We solve this problem by changing our code not to release all
locks in such case. Instead we release only locks which were
acquired by current statement and then try to reacquire them
by restarting open/lock tables process. We piggyback on simple
deadlock detector implementation since this change has to be
done anyway for it.
3655 Jon Olav Hauglid 2009-10-19
Bug #30977 Concurrent statement using stored function and DROP FUNCTION
breaks SBR
Bug #48246 assert in close_thread_table
Implement a fix for:
Bug #41804 purge stored procedure cache causes mysterious hang for many
minutes
Bug #49972 Crash in prepared statements
The problem was that concurrent execution of DML statements that
use stored functions and DDL statements that drop/modify the same
function might result in incorrect binary log in statement (and
mixed) mode and therefore break replication.
This patch fixes the problem by introducing metadata locking for
stored procedures and functions. This is similar to what is done
in Bug#25144 for views. Procedures and functions now are
locked using metadata locks until the transaction is either
committed or rolled back. This prevents other statements from
modifying the procedure/function while it is being executed. This
provides commit ordering - guaranteeing serializability across
multiple transactions and thus fixes the reported binlog problem.
Note that we do not take locks for top-level CALLs. This means
that procedures called directly are not protected from changes by
simultaneous DDL operations so they are executed at the state they
had at the time of the CALL. By not taking locks for top-level
CALLs, we still allow transactions to be started inside
procedures.
This patch also changes stored procedure cache invalidation.
Upon a change of cache version, we no longer invalidate the entire
cache, but only those routines which we use, only when a statement
is executed that uses them.
This patch also changes the logic of prepared statement validation.
A stored procedure used by a prepared statement is now validated
only once a metadata lock has been acquired. A version mismatch
causes a flush of the obsolete routine from the cache and
statement reprepare.
Incompatible changes:
1) ER_LOCK_DEADLOCK is reported for a transaction trying to access
a procedure/function that is locked by a DDL operation in
another connection.
2) Procedure/function DDL operations are now prohibited in LOCK
TABLES mode as exclusive locks must be taken all at once and
LOCK TABLES provides no way to specifiy procedures/functions to
be locked.
Test cases have been added to sp-lock.test and rpl_sp.test.
Work on this bug has very much been a team effort and this patch
includes and is based on contributions from Davi Arnaut, Dmitry
Lenev, Magne Mæhre and Konstantin Osipov.
- backported code that handles %f/%g arguments in
my_vsnprintf.c from 6.0
- backported %f/%g tests in unittest/mysys/my_vsnprintf-t.c
from 6.0
- replaced snprintf("%g") in sql/set_var.cc with my_gcvt()
- removed unnecessary "--replace-result"s for Windows in
mysql-test/suite/sys_vars/t/long_query_time_basic.test
- some test results adjustments
subselect_single_select_engine::exec()
When a subquery doesn't need to be evaluated because
it returns only aggregate functions and these aggregates
can be calculated from the metadata about the table it
was not updating all the relevant members of the JOIN
structure to reflect that this is a constant query.
This caused problems to the enclosing subquery
('<> SOME' in the test case above) trying to read some
data about the tables.
Fixed by setting const_tables to the number of tables
when the SELECT is optimized away.
Conflicts:
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/instance_map.cc
Contents conflict in server-tools/instance-manager/listener.cc
Contents conflict in server-tools/instance-manager/options.cc
Contents conflict in server-tools/instance-manager/user_map.cc
flush_cached_records() was not correctly checking for errors after calling
Item::val_xxx() methods. The expressions may contain subqueries
or stored procedures that cause errors that should stop the statement.
Fixed by correctly checking for errors and propagating them up the call stack.
error in the query.
Fixes a leak after materializing a GROUP BY subquery to a
temp table when the subquery has a blob column in the SELECT
list.
Fixed by correctly destructing temporary buffers for re-usable
queries
Problem was when calculating the range of partitions for
pruning.
Solution was to get the calculation correct. I also simplified
it a bit for easier understanding.
to string conversions and vice versa"
Initial import of the dtoa.c code and custom wrappers around it
to allow its usage from the server code.
Conversion of FLOAT/DOUBLE values to DECIMAL ones or strings
and vice versa has been significantly reworked. As the new
algoritms are more precise than the older ones, results of such
conversions may not always match those obtained from older
server versions. This in turn may break compatibility for some
applications.
This patch also fixes the following bugs:
- bug #12860 "Difference in zero padding of exponent between
Unix and Windows"
- bug #21497 "DOUBLE truncated to unusable value"
- bug #26788 "mysqld (debug) aborts when inserting specific
numbers into char fields"
- bug #24541 "Data truncated..." on decimal type columns
without any good reason"
Several problems fixed :
1. Non constant expressions in UNION ... ORDER BY were not correctly cleaned up
in st_select_lex_unit::cleanup() causing crashes in EXPLAIN EXTENDED because of
fields quoted by these expressions pointing to the already freed temporary table
used to calculate the UNION.
Fixed by correctly cleaning up expressions of any depth.
2. Subqueries in the order by part of UNION ... ORDER BY ... caused a crash in
EXPLAIN EXTENDED because of a transformation attempt made during EXPLAIN EXTENDED
execution. Fixed by not doing the transformation when in EXPLAIN.
3. Fulltext functions caused crash when in the ORDER BY part of an un-parenthesized
UNION that gets "promoted" to be valid for the whole union, e.g.
SELECT * FROM t1 UNION SELECT * FROM t2 ORDER BY MATCHES (a) AGAINST ('abc' IN BOOLEAN MODE).
This is a case that demonstrates a more general problem of parts of the query being
moved to another level. When doing such transformation late in the optimization run
when most of the flags about the contents of the query are already aggregated it's possible
to "split" the flags so that they correctly reflect the new queries after the transformation.
In specific the ST_SELECT_LEX::ftfunc_list is holding all the free text function for all the
parts of the second SELECT in the UNION and we don't know what part of that is in the ORDER BY
that we're to move to the UNION level and what part is about the other parts of the second SELECT.
Fixed by throwing and error when such statements are about to be processed by adding a check
for the presence of MATCH() inside the ORDER BY clause that's going to get promoted to UNION.
To workaround this new limitation one must parenthesize the UNION SELECTs and provide a real
global ORDER BY for the UNION outside of the parenthesis.
At the end of execution top level join execution
we cleanup this join with true argument.
It leads to underlying join cleanup(subquery) with true argument too
and to tmp_table_param->field array cleanup which is required later.
The problem is that Item_func_set_user_var does not set
result_filed which leads to unnecessary repeated excution of subquery
on final stage.
The fix is to set result_field for Item_func_set_user_var.
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
on re-execution of prepared statement
Problem: some (see eq_ref_table()) ORDER BY/GROUP BY optimization
is called before each PS execution. However, we don't properly
initialize its stucture every time before the call.
Fix: properly initialize the sturture used.
