NULL from outer join query
Problem: optimising MIN/MAX() queries without GROUP BY clause
by replacing the aggregate expression with a constant, we may set it
to NULL disregarding the fact that there may be outer joins involved.
Fix: don't replace MIN/MAX() with NULL if there're outer joins.
Note: the fix itself is just
- if (!count)
+ if (!count && !outer_tables)
set to NULL
The rest of the patch eliminates repeated code to improve speed
and for easy maintenance of the code.
update statements
Only SELECT statements report any examined rows in the slow
log. Slow UPDATE, DELETE and INSERT statements report 0 rows
examined, unless the statement has a condition including a
SELECT substatement.
This patch adds counting of examined rows for the UPDATE and
DELETE statements. An INSERT ... VALUES statement will still
not report any rows as examined.
remember range endpoints
The Loose Index Scan optimization keeps track of a sequence
of intervals. For the current interval it maintains the
current interval's endpoints. But the maximum endpoint was
not stored in the SQL layer; rather, it relied on the
storage engine to retain this value in-between reads. By
coincidence this holds for MyISAM and InnoDB. Not for the
partitioning engine, however.
Fixed by making the key values iterator
(QUICK_RANGE_SELECT) keep track of the current maximum endpoint.
This is also more efficient as we save a call through the
handler API in case of open-ended intervals.
The code to calculate endpoints was extracted into
separate methods in QUICK_RANGE_SELECT, and it was possible to
get rid of some code duplication as part of fix.
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
Conflicts:
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/t/explain.test
Text conflict in sql/net_serv.cc
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_priv.h
truncates text/blob to 766 chars
mysqldump and SELECT ... INTO OUTFILE truncated long BLOB/TEXT
values to size of 766 bytes (MAX_FIELD_WIDTH or 255 * 3 + 1).
The select_export::send_data method has been modified to
reallocate a conversion buffer for long field data.
greedy_search optimizer_search_depth=0
The algorithm inside restore_prev_nj_state failed to
properly update the counters within the NESTED_JOIN
tree. The counter was decremented each time a table in the
node was removed from the QEP, the correct thing to do being
only to decrement it when the last table in the child node
was removed from the plan. This lead to node counters
getting negative values and the plan thus appeared
impossible. An assertion caught this.
Fixed by not recursing up the tree unless the last table in
the join nest node is removed from the plan
data is selected or not
Temporary and permanent tables should live in different
namespaces. In this case, resolving a permanent table
name gave the temporary table, resulting in a name
collision.
The bug happened under the following condition:
- there was a user variable of type REAL, containing NULL value
- there was a table with a NOT_NULL column of any type but REAL, having
default value (or auto increment);
- a row was inserted into the table with the user variable as value.
A warning was emitted here.
The problem was that handling of NULL values of REAL type was not properly
implemented: it didn't expect that REAL NULL value can be assigned to other
data type.
Basically, the problem was that set_field_to_null() was used instead of
set_field_to_null_with_conversions().
The fix is to use the right function, or more generally, to allow conversion of
REAL NULL values to other data types.
Problem:
item->name was NULL for Item_user_var_as_out_param
which made strcmp(something, item->name) crash in the LOAD XML code.
Fix:
- item_func.h: Adding set_name() in constuctor for Item_user_var_as_out_param
- sql_load.cc: Changing the condition in write_execute_load_query_log_event() which
distiguished between Item_user_var_as_out_param and Item_field
from
if (item->name == NULL)
to
if (item->type() == Item::FIELD_ITEM)
- loadxml.result, loadxml.test: adding tests
table
If a temporary table A exists, and a (permanent) table
with the same name is attempted created with
"CREATE TABLE ... AS SELECT", the create would fail with
an error.
1050: Table 'A' already exists
The error occured in MySQL 5.1 releases, but is not
present in MySQL 5.5. This patch adds a regression
test to ensure that the problem does not reoccur.
Problem: after introduction of "WL#2649 Number-to-string conversions"
This query:
SET NAMES cp850; -- Or any other non-latin1 ASCII-based character set
SELECT * FROM t1
WHERE datetime_column='2010-01-01 00:00:00'
started to add extra character set conversion:
SELECT * FROM t1
WHERE CONVERT(datetime_column USING cp850)='2010-01-01 00:00:00';
so index on DATETIME column was not used anymore.
Fix:
avoid convertion of NUMERIC/DATETIME items
(i.e. those with derivation DERIVATION_NUMERIC).
This is the 5.1 merge and extension of the fix.
The server was happily accepting paths in table name in all places a table
name is accepted (e.g. a SELECT). This allowed all users that have some
privilege over some database to read all tables in all databases in all
mysql server instances that the server file system has access to.
Fixed by :
1. making sure no path elements are allowed in quoted table name when
constructing the path (note that the path symbols are still valid in table names
when they're properly escaped by the server).
2. checking the #mysql50# prefixed names the same way they're checked for
path elements in mysql-5.0.
Iterative patch improvement. Previously committed patch
caused wrong result on Windows. The previous patch also
broke secure_file_priv for symlinks since not all file
paths which must be compared against this variable are
normalized using the same norm.
The server variable opt_secure_file_priv wasn't
normalized properly and caused the operations
LOAD DATA INFILE .. INTO TABLE ..
and
SELECT load_file(..)
to do different interpretations of the
--secure-file-priv option.
The patch moves code to the server initialization
routines so that the path always is normalized
once and only once.
It was also intended that setting the option
to an empty string should be equal to
lifting all previously set restrictions. This
is also fixed by this patch.
There were two problems here:
1. misleading error message
2. abusing KILL QUERY in the test case
1. The server reported "'DELETE FROM t1' failed: 1689: Wait on a lock was
aborted due to a pending exclusive lock", while the proper error message
should be "'DELETE FROM t1' failed: 1317: Query execution was interrupted".
The problem is that the server has two different flags for
signalling that a query is being killed: THD::killed and
mysys_var::abort. The test case triggers a race: sometimes
mysys_var::abort is set earlier than THD::killed. That leads
to the following situation:
- thr_lock() checks mysys_var::abort and returns error status,
since mysys_var::abort is set;
- the caller (mysql_lock_tables()) gets an error from thr_lock(),
but THD::killed is not set, so it decides that thr_lock() couldn't
get a lock due to a pending exclusive lock.
This is a known issue with the server and it's not going to be fixed soon.
5.5 differs from 5.1 here as follows: when thr_lock() returns an error:
- 5.1 continues trying thr_lock() until success;
- 5.5 propagates the error
2. The test case uses KILL QUERY is a highly concurent environment.
The fix is to wait for the dying statement to rest in peace before
executing another DELETE FROM t1.
WHERE predicates containing references to empty tables in a
subquery were handled incorrectly by the optimizer when
executing EXPLAIN. As a result, the optimizer could try to
evaluate such predicates rather than just stop with
"Impossible WHERE noticed after reading const tables" as
it would do in a non-subquery case. This led to valgrind
errors and crashes.
Fixed the code checking the above condition so that subqueries
are not excluded and hence are handled in the same way as top
level SELECTs.
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
during an UPDATE
Extended the fix for bug 29310 to multi-table update:
When a table is being updated it has two set of fields - fields required for
checks of conditions and fields to be updated. A storage engine is allowed
not to retrieve columns marked for update. Due to this fact records can't
be compared to see whether the data has been changed or not. This makes the
server always update records independently of data change.
Now when an auto-updatable timestamp field is present and server sees that
a table handle isn't going to retrieve write-only fields then all of such
fields are marked as to be read to force the handler to retrieve them.
Clarified error messages related to unsafe statements:
- avoid the internal technical term "row injection"
- use 'binary log' instead of 'binlog'
- avoid the word 'unsafeness'
Fix for bug #46947 "Embedded SELECT without FOR UPDATE is
causing a lock", with after-review fixes.
SELECT statements with subqueries referencing InnoDB tables
were acquiring shared locks on rows in these tables when they
were executed in REPEATABLE-READ mode and with statement or
mixed mode binary logging turned on.
This was a regression which were introduced when fixing
bug 39843.
The problem was that for tables belonging to subqueries
parser set TL_READ_DEFAULT as a lock type. In cases when
statement/mixed binary logging at open_tables() time this
type of lock was converted to TL_READ_NO_INSERT lock at
open_tables() time and caused InnoDB engine to acquire
shared locks on reads from these tables. Although in some
cases such behavior was correct (e.g. for subqueries in
DELETE) in case of SELECT it has caused unnecessary locking.
This patch tries to solve this problem by rethinking our
approach to how we handle locking for SELECT and subqueries.
Now we always set TL_READ_DEFAULT lock type for all cases
when we read data. When at open_tables() time this lock
is interpreted as TL_READ_NO_INSERT or TL_READ depending
on whether this statement as a whole or call to function
which uses particular table should be written to the
binary log or not (if yes then statement should be properly
serialized with concurrent statements and stronger lock
should be acquired).
Test coverage is added for both InnoDB and MyISAM.
This patch introduces an "incompatible" change in locking
scheme for subqueries used in SELECT ... FOR UPDATE and
SELECT .. IN SHARE MODE.
In 4.1 the server would use a snapshot InnoDB read for
subqueries in SELECT FOR UPDATE and SELECT .. IN SHARE MODE
statements, regardless of whether the binary log is on or off.
If the user required a different type of read (i.e. locking read),
he/she could request so explicitly by providing FOR UPDATE/IN SHARE MODE
clause for each individual subquery.
On of the patches for 5.0 broke this behaviour (which was not documented
or tested), and started to use locking reads fora all subqueries in SELECT ...
FOR UPDATE/IN SHARE MODE. This patch restored 4.1 behaviour.
The problem was in an incorrect debug assertion. The expression
used in the failing assertion states that when finding
references matching ORDER BY expressions, there can be only one
reference to a single table. But that does not make any sense,
all test cases for this bug are valid examples with multiple
identical WHERE expressions referencing the same table which
are also present in the ORDER BY list.
Fixed by removing the failing assertion. We also have to take
care of the 'found' counter so that we count multiple
references only once. We rely on this fact later in
eq_ref_table().
Problem: ALTER TABLE ADD INDEX may lead to table copying if there's
numeric field(s) with non-default display width modificator specified.
Fix: compare numeric field's storage lenghts when we decide whether
they can be considered 'equal' for table alteration purposes.
Previously installed dynamic plugins are explicitly not loaded
on startup with --skip-grant-tables enabled. However, INSTALL
PLUGIN/UNINSTALL PLUGIN commands are allowed, and result in
inconsistent error messages (reporting duplicate plugin or
plugin does not exist).
This patch adds a check for --skip-grant-tables mode, and
returns error ER_OPTION_PREVENTS_STATEMENT to the user when
the above commands are attempted.
partition if muliple columns used
Problem was that range scanning through the sorted array of
the column list values did not use a correct index calculation.
Fixed by also taking the number of columns in the calculation.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
