A change in the default values of some config parameters
caused this test to fail, adjust the test and make it more
robust so it does not fail for the same reason in the future.
The reason for the bug above is unclear but
- Modify pfs_upgrade so that it's result is easier to analyze in case something fails
- Fix several minor weaknesses which could cause that a successing test (either an
already existing or a to be developed one) fails because of imperfect cleanup,
too slow disconnected sessions etc.
should either fix the bug or reduce it's probability or at least
make the analysis of failures easier.
table with active trx
Essentially, the problem is that InnoDB does a implicit commit
when a cursor (table handler) is unlocked/closed, creating
a dissonance between the transaction state within the server
layer and the storage engine layer. Theoretically, a statement
transaction can encompass several table instances in a similar
manner to a multiple statement transaction, hence it does not
make sense to limit a statement transaction to the lifetime of
the table instances (cursors) used within it.
Since this particular instance of the problem is only triggerable
on 5.1 and is masked on 5.5 due 2PC being skipped (assertion is in
the prepare phase of a 2PC), the solution (which is less risky) is
to explicitly end the transaction before the cached table is unlock
on rename table.
The patch is to be null merged into trunk.
Problem: when SHOW BINLOG EVENTS was issued, it increased the value of
@@session.max_allowed_packet. This allowed a non-root user to increase
the amount of memory used by her thread arbitrarily. Thus, it removes
the bound on the amount of system resources used by a client, so it
presents a security risk (DoS attack).
Fix: it is correct to increase the value of @@session.max_allowed_packet
while executing SHOW BINLOG EVENTS (see BUG 30435). However, the
increase should only be temporary. Thus, the fix is to restore the value
when SHOW BINLOG EVENTS ends.
The value of @@session.max_allowed_packet is also increased in
mysql_binlog_send (i.e., the binlog dump thread). It is not clear if this
can cause any trouble, since normally the client that issues
COM_BINLOG_DUMP will not issue any other commands that would be affected
by the increased value of @@session.max_allowed_packet. However, we
restore the value just in case.
This crash occured after ALTER TABLE was used on a temporary
transactional table locked by LOCK TABLES. Any later attempts to
execute LOCK/UNLOCK TABLES, caused the server to crash.
The reason for the crash was the list of locked tables would
end up having a pointer to a free'd table instance. This happened
because ALTER TABLE deleted the table without also removing the
table reference from the locked tables list.
This patch fixes the problem by making sure ALTER TABLE also
removes the table from the locked tables list.
Test case added to innodb_mysql.test.
Merge up to sunny.bains@oracle.com-20100625081841-ppulnkjk1qlazh82 .
There are 8 more changesets in mysql-5.1-innodb, but PB2 shows a
failure for a test added in one of them. If that is resolved quickly
then those 8 more changesets will be merged too.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
DATABASE with open HANDLER"
Remove LOCK_create_db, database name locks, and use metadata locks instead.
This exposes CREATE/DROP/ALTER DATABASE statements to the graph-based
deadlock detector in MDL, and paves the way for a safe, deadlock-free
implementation of RENAME DATABASE.
Database DDL statements will now take exclusive metadata locks on
the database name, while table/view/routine DDL statements take
intention exclusive locks on the database name. This prevents race
conditions between database DDL and table/view/routine DDL.
(e.g. DROP DATABASE with concurrent CREATE/ALTER/DROP TABLE)
By adding database name locks, this patch implements
WL#4450 "DDL locking: CREATE/DROP DATABASE must use database locks" and
WL#4985 "DDL locking: namespace/hierarchical locks".
The patch also changes code to use init_one_table() where appropriate.
The new lock_table_names() function requires TABLE_LIST::db_length to
be set correctly, and this is taken care of by init_one_table().
This patch also adds a simple template to help work with
the mysys HASH data structure.
Most of the patch was written by Konstantin Osipov.
BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
Merge and adjust a forgotten change to fix this bug.
rb://393 approved by Jimmy Yang
------------------------------------------------------------------------
r3794 | marko | 2009-01-07 14:14:53 +0000 (Wed, 07 Jan 2009) | 18 lines
branches/6.0: Allow the minimum length of a multi-byte character to be
up to 4 bytes. (Bug #35391)
dtype_t, dict_col_t: Replace mbminlen:2, mbmaxlen:3 with mbminmaxlen:5.
In this way, the 5 bits can hold two values of 0..4, and the storage size
of the fields will not cross the 64-bit boundary. Encode the values as
DATA_MBMAX * mbmaxlen + mbminlen. Define the auxiliary macros
DB_MBMINLEN(mbminmaxlen), DB_MBMAXLEN(mbminmaxlen), and
DB_MINMAXLEN(mbminlen, mbmaxlen).
Try to trim and pad UTF-16 and UTF-32 with spaces as appropriate.
Alexander Barkov suggested the use of cs->cset->fill(cs, buff, len, 0x20).
ha_innobase::store_key_val_for_row() now does that, but the added function
row_mysql_pad_col() does not, because it doesn't have the MySQL TABLE object.
rb://49 approved by Heikki Tuuri
------------------------------------------------------------------------
switching binlog format to ROW
BUG 52616 fixed the case which the user would switch from STMT to
ROW binlog format, but the server would silently ignore it. After
that fix thd->is_current_stmt_binlog_format_row() reports correct
value at logging time and events are logged in ROW (as expected)
instead of STMT as they were previously and wrongly logged.
However, the fix was only partially complete, because on
disconnect, at THD cleanup, the implicit logging of temporary
tables is conditionally performed. If the binlog_format==ROW and
thd->is_current_stmt_binlog_format_row() is true then DROPs are
not logged. Given that the user can switch from STMT to ROW, this
is wrong because the server cannot tell, just by relying on the
ROW binlog format, that the tables have been dropped before. This
is effectively similar to the MIXED scenario when a switch from
STMT to ROW is triggered.
We fix this by removing this condition from
close_temporary_tables.
