When a binlog is replayed into a server, e.g.:
$ mysqlbinlog binlog.000001 | mysql
it sets a pseudo slave mode on the client connection in order to server
be able to read binlog events, there is, a format description event is
needed to correctly read following events.
Also this pseudo slave mode applies to the current connection
replication rules that are needed to correctly apply binlog events.
If a binlog dump is sourced on a connection, this pseudo slave mode will
remains after it, what will apply unexpected rules from customer
perspective to following commands.
Added a new SET statement to binlog dump that will unset pseudo slave
mode at the end of dump file.
QUOTING IN REPLICATION
Problem: Misquoting or unquoted identifiers may lead to
incorrect statements to be logged to the binary log.
Fix: we use specialized functions to append quoted identifiers in
the statements generated by the server.
Major replication test framework cleanup. This does the following:
- Ensure that all tests clean up the replication state when they
finish, by making check-testcase check the output of SHOW SLAVE STATUS.
This implies:
- Slave must not be running after test finished. This is good
because it removes the risk for sporadic errors in subsequent
tests when a test forgets to sync correctly.
- Slave SQL and IO errors must be cleared when test ends. This is
good because we will notice if a test gets an unexpected error in
the slave threads near the end.
- We no longer have to clean up before a test starts.
- Ensure that all tests that wait for an error in one of the slave
threads waits for a specific error. It is no longer possible to
source wait_for_slave_[sql|io]_to_stop.inc when there is an error
in one of the slave threads. This is good because:
- If a test expects an error but there is a bug that causes
another error to happen, or if it stops the slave thread without
an error, then we will notice.
- When developing tests, wait_for_*_to_[start|stop].inc will fail
immediately if there is an error in the relevant slave thread.
Before this patch, we had to wait for the timeout.
- Remove duplicated and repeated code for setting up unusual replication
topologies. Now, there is a single file that is capable of setting
up arbitrary topologies (include/rpl_init.inc, but
include/master-slave.inc is still available for the most common
topology). Tests can now end with include/rpl_end.inc, which will clean
up correctly no matter what topology is used. The topology can be
changed with include/rpl_change_topology.inc.
- Improved debug information when tests fail. This includes:
- debug info is printed on all servers configured by include/rpl_init.inc
- User can set $rpl_debug=1, which makes auxiliary replication files
print relevant debug info.
- Improved documentation for all auxiliary replication files. Now they
describe purpose, usage, parameters, and side effects.
- Many small code cleanups:
- Made have_innodb.inc output a sensible error message.
- Moved contents of rpl000017-slave.sh into rpl000017.test
- Added mysqltest variables that expose the current state of
disable_warnings/enable_warnings and friends.
- Too many to list here: see per-file comments for details.
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
locks for DML statements and changes the way MDL locks
are acquired/granted in contended case.
Instead of backing-off when a lock conflict is encountered
and waiting for it to go away before restarting open_tables()
process we now wait for lock to be released without releasing
any previously acquired locks. If conflicting lock goes away
we resume opening tables. If waiting leads to a deadlock we
try to resolve it by backing-off and restarting open_tables()
immediately.
As result both waiting for possibility to acquire and
acquiring of a metadata lock now always happen within the
same MDL API call. This has allowed to make release of a lock
and granting it to the most appropriate pending request an
atomic operation.
Thanks to this it became possible to wake up during release
of lock only those waiters which requests can be satisfied
at the moment as well as wake up only one waiter in case
when granting its request would prevent all other requests
from being satisfied. This solves thundering herd problem
which occured in cases when we were releasing some lock and
woke up many waiters for SNRW or X locks (this was the issue
in bug#52289 "performance regression for MyISAM in sysbench
OLTP_RW test".
This also allowed to implement more fair (FIFO) scheduling
among waiters with the same priority.
It also opens the door for introducing new types of requests
for metadata locks such as low-prio SNRW lock which is
necessary in order to support LOCK TABLES LOW_PRIORITY WRITE.
Notice that after this sometimes can report ER_LOCK_DEADLOCK
error in cases in which it has not happened before.
Particularly we will always report this error if waiting for
conflicting lock has happened in the middle of transaction
and resulted in a deadlock. Before this patch the error was
not reported if deadlock could have been resolved by backing
off all metadata locks acquired by the current statement.
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
Clarified error messages related to unsafe statements:
- avoid the internal technical term "row injection"
- use 'binary log' instead of 'binlog'
- avoid the word 'unsafeness'
Allow stored procedure variables in LIMIT clause.
Only allow variables of INTEGER types.
Handle negative values by means of an implicit cast to UNSIGNED
(similarly to prepared statement placeholders).
Add tests.
Make sure replication works by not doing NAME_CONST substitution
for variables in LIMIT clause.
Add replication tests.
removed in MySQL 6.0
CREATE TABLE... TYPE= returns the warning "The syntax
'TYPE=storage_engine' is deprecated and will be removed in
MySQL 6.0. Please use 'ENGINE=storage_engine' instead"
This syntax is deprecated already from version 5.4.4, so
the message has been changed.
In addition, the deprecation macro was changed to reflect
the ServerPT decision not to include version number in the
warning message.
A number of test result files have been changed as a
consequence of the change in the deprecation macro.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
3655 Jon Olav Hauglid 2009-10-19
Bug #30977 Concurrent statement using stored function and DROP FUNCTION
breaks SBR
Bug #48246 assert in close_thread_table
Implement a fix for:
Bug #41804 purge stored procedure cache causes mysterious hang for many
minutes
Bug #49972 Crash in prepared statements
The problem was that concurrent execution of DML statements that
use stored functions and DDL statements that drop/modify the same
function might result in incorrect binary log in statement (and
mixed) mode and therefore break replication.
This patch fixes the problem by introducing metadata locking for
stored procedures and functions. This is similar to what is done
in Bug#25144 for views. Procedures and functions now are
locked using metadata locks until the transaction is either
committed or rolled back. This prevents other statements from
modifying the procedure/function while it is being executed. This
provides commit ordering - guaranteeing serializability across
multiple transactions and thus fixes the reported binlog problem.
Note that we do not take locks for top-level CALLs. This means
that procedures called directly are not protected from changes by
simultaneous DDL operations so they are executed at the state they
had at the time of the CALL. By not taking locks for top-level
CALLs, we still allow transactions to be started inside
procedures.
This patch also changes stored procedure cache invalidation.
Upon a change of cache version, we no longer invalidate the entire
cache, but only those routines which we use, only when a statement
is executed that uses them.
This patch also changes the logic of prepared statement validation.
A stored procedure used by a prepared statement is now validated
only once a metadata lock has been acquired. A version mismatch
causes a flush of the obsolete routine from the cache and
statement reprepare.
Incompatible changes:
1) ER_LOCK_DEADLOCK is reported for a transaction trying to access
a procedure/function that is locked by a DDL operation in
another connection.
2) Procedure/function DDL operations are now prohibited in LOCK
TABLES mode as exclusive locks must be taken all at once and
LOCK TABLES provides no way to specifiy procedures/functions to
be locked.
Test cases have been added to sp-lock.test and rpl_sp.test.
Work on this bug has very much been a team effort and this patch
includes and is based on contributions from Davi Arnaut, Dmitry
Lenev, Magne Mæhre and Konstantin Osipov.
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
For application compatibility reasons MySQL converts "<autoincrement_column> IS NULL"
predicates to "<autoincrement_column> = LAST_INSERT_ID()" in the first SELECT following an
INSERT regardless of whether they're top level predicates or not. This causes wrong and
obscure results when these predicates are combined with others on the same columns. Fixed
by only doing the transformation on a single top-level predicate if a special SQL mode is
turned on (sql_auto_is_null).
Also made sql_auto_is_null off by default.
per-file comments:
mysql-test/r/func_isnull.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
test result updated
mysql-test/t/func_isnull.test
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
test case added
sql/mysqld.cc
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
sql_auto_is_null now is OFF by default.
sql/sql_select.cc
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
remove_eq_conds() split in two parts - one only checks the upper condition,
the req_remove_eq_conds() recursively checks all the condition tree.
mysql-test/extra/rpl_tests/rpl_insert_id.test
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
test fixed (set the sql_auto_is_null variable)
mysql-test/r/mysqlbinlog.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/r/mysqlbinlog2.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/r/odbc.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/r/query_cache.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/r/user_var-binlog.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/binlog/r/binlog_row_ctype_ucs.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/binlog/r/binlog_stm_ctype_ucs.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/rpl/r/rpl_insert_id.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/suite/rpl/r/rpl_sp.result
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
result updated
mysql-test/t/odbc.test
Bug#41371 Select returns 1 row with condition "col is not null and col is null"
test fixed (set the sql_auto_is_null variable)
There is an inconsistency with DROP DATABASE IF EXISTS, DROP
TABLE IF EXISTS and DROP VIEW IF EXISTS: those are binlogged even
if the DB or TABLE does not exist, whereas DROP PROCEDURE IF
EXISTS does not. It would be nice or at least consistent if DROP
PROCEDURE/STATEMENT worked the same too.
Fixed DROP PROCEDURE|FUNCTION IF EXISTS by adding a call to
write_bin_log in mysql_execute_command. Checked also if all
documented "DROP (...) IF EXISTS" get binlogged. Left out DROP
SERVER IF EXISTS because it seems that it only gets binlogged when
using row event (see BUG#25705).
Adds --general-log-file, --slow-query-log-file command-
line options to match system variables of the same names.
Deprecates --log, --log-slow-queries command-line option
and log, log_slow_queries system-variables for v7.0; they
are superseded by general_log/general_log_file and
slow_query_log/slow_query_log_file, respectively.
Problem 1: tests often fail in pushbuild with a timeout when waiting
for the slave to start/stop/receive error.
Fix 1: Updated the wait_for_slave_* macros in the following way:
- The timeout is increased by a factor ten
- Refactored the macros so that wait_for_slave_param does the work for
the other macros.
Problem 2: Tests are often incorrectly written, lacking a
source include/wait_for_slave_to_[start|stop].inc.
Fix 2: Improved the chance to get it right by adding
include/start_slave.inc and include/stop_slave.inc, and updated tests
to use these.
Problem 3: The the built-in test language command
wait_for_slave_to_stop is a misnomer (does not wait for the slave io
thread) and does not give as much debug info in case of failure as
the otherwise equivalent macro
source include/wait_for_slave_sql_to_stop.inc
Fix 3: Replaced all calls to the built-in command by a call to the
macro.
Problem 4: Some, but not all, of the wait_for_slave_* macros had an
implicit connection slave. This made some tests confusing to read,
and made it more difficult to use the macro in circular replication
scenarios, where the connection named master needs to wait.
Fix 4: Removed the implicit connection slave from all
wait_for_slave_* macros, and updated tests to use an explicit
connection slave where necessary.
Problem 5: The macros wait_slave_status.inc and wait_show_pattern.inc
were unused. Moreover, using them is difficult and error-prone.
Fix 5: remove these macros.
Problem 6: log_bin_trust_function_creators_basic failed when running
tests because it assumed @@global.log_bin_trust_function_creators=1,
and some tests modified this variable without resetting it to its
original value.
Fix 6: All tests that use this variable have been updated so that
they reset the value at end of test.
