After BUG#36649, warnings for sub-statements are cleared when a
new sub-statement is started. This is problematic since it suppresses
warnings for unsafe statements in some cases. It is important that we
always give a warning to the client, because the user needs to know
when there is a risk that the slave goes out of sync.
We fixed the problem by generating warning messages for unsafe statements
while returning from a stored procedure, function, trigger or while
executing a top level statement.
We also started checking unsafeness when both performance and log tables are
used. This is necessary after the performance schema which does a distinction
between performance and log tables.
FLUSH TABLES <list> WITH READ LOCK are incompatible" to
be pushed as separate patch.
Replaced thread state name "Waiting for table", which was
used by threads waiting for a metadata lock or table flush,
with a set of names which better reflect types of resources
being waited for.
Also replaced "Table lock" thread state name, which was used
by threads waiting on thr_lock.c table level lock, with more
elaborate "Waiting for table level lock", to make it
more consistent with other thread state names.
Updated test cases and their results according to these
changes.
Fixed sys_vars.query_cache_wlock_invalidate_func test to not
to wait for timeout of wait_condition.inc script.
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
With statement- or mixed-mode logging, "LOAD DATA INFILE" queries
are written to the binlog using special types of log events.
When mysqlbinlog reads such events, it re-creates the file in a
temporary directory with a generated filename and outputs a
"LOAD DATA INFILE" query where the filename is replaced by the
generated file. The temporary file is not deleted by mysqlbinlog
after termination.
To fix the problem, in mixed mode we go to row-based. In SBR, we
document it to remind user the tmpfile is left in a temporary
directory.
BUG#54872 MBR: replication failure caused by using tmp table inside transaction
Changed criteria to classify a statement as unsafe in order to reduce the
number of spurious warnings. So a statement is classified as unsafe when
there is on-going transaction at any point of the execution if:
1. The mixed statement is about to update a transactional table and
a non-transactional table.
2. The mixed statement is about to update a temporary transactional
table and a non-transactional table.
3. The mixed statement is about to update a transactional table and
read from a non-transactional table.
4. The mixed statement is about to update a temporary transactional
table and read from a non-transactional table.
5. The mixed statement is about to update a non-transactional table
and read from a transactional table when the isolation level is
lower than repeatable read.
After updating a transactional table if:
6. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
7. The mixed statement is about to update a non-transactional table
and read from a temporary transactional table.
8. The mixed statement is about to update a non-transactionala table
and read from a temporary non-transactional table.
9. The mixed statement is about to update a temporary non-transactional
table and update a non-transactional table.
10. The mixed statement is about to update a temporary non-transactional
table and read from a non-transactional table.
11. A statement is about to update a non-transactional table and the
option variables.binlog_direct_non_trans_update is OFF.
The reason for this is that locks acquired may not protected a concurrent
transaction of interfering in the current execution and by consequence in
the result. So the patch reduced the number of spurious unsafe warnings.
Besides we fixed a regression caused by BUG#51894, which makes temporary
tables to go into the trx-cache if there is an on-going transaction. In
MIXED mode, the patch for BUG#51894 ignores that the trx-cache may have
updates to temporary non-transactional tables that must be written to the
binary log while rolling back the transaction.
So we fix this problem by writing the content of the trx-cache to the
binary log while rolling back a transaction if a non-transactional
temporary table was updated and the binary logging format is MIXED.
switching binlog format to ROW
BUG 52616 fixed the case which the user would switch from STMT to
ROW binlog format, but the server would silently ignore it. After
that fix thd->is_current_stmt_binlog_format_row() reports correct
value at logging time and events are logged in ROW (as expected)
instead of STMT as they were previously and wrongly logged.
However, the fix was only partially complete, because on
disconnect, at THD cleanup, the implicit logging of temporary
tables is conditionally performed. If the binlog_format==ROW and
thd->is_current_stmt_binlog_format_row() is true then DROPs are
not logged. Given that the user can switch from STMT to ROW, this
is wrong because the server cannot tell, just by relying on the
ROW binlog format, that the tables have been dropped before. This
is effectively similar to the MIXED scenario when a switch from
STMT to ROW is triggered.
We fix this by removing this condition from
close_temporary_tables.
mysql_client_binlog_statement
Problem: server may read from unassigned memory performing
"wrong" BINLOG queries.
Fix: never read from unassigned memory.
The default storage engine is changed from MyISAM to
InnoDB, in all builds except for the embedded server.
In addition, the following system variables are
changed:
* innodb_file_per_table is enabled
* innodb_strict_mode is enabled
* innodb_file_format_name_update is changed
to 'Barracuda'
The test suite is changed so that tests that do not
explicitly include the have_innodb.inc are run with
--default-storage-engine=MyISAM. This is to ease the
transition, so that most regression tests are run
with the same engine as before.
Some tests are disabled for the embedded server
regression test, as the output of certain statements
will be different that for the regular server
(i.e SELECT @@default_storage_engine). This is to
ease transition.
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Added test cases to verify the expected behaviour of :
SET SESSION TRANSACTION ISOLATION LEVEL,
SET TRANSACTION ISOLATION LEVEL,
@@completion_type,
COMMIT AND CHAIN,
ROLLBACK AND CHAIN
..and some combinations of the above
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
errors
In the fix of BUG#39934 in 5.1-rep+3, errors are generated when
binlog_format=row and a statement modifies a table restricted to
statement-logging (ER_BINLOG_ROW_MODE_AND_STMT_ENGINE); or if
binlog_format=statement and a statement modifies a table restricted to
row-logging (ER_BINLOG_STMT_MODE_AND_ROW_ENGINE).
However, some DDL statements that lock tables (e.g. ALTER TABLE,
CREATE INDEX and CREATE TRIGGER) were causing spurious errors,
although no row might be inserted into the binary log.
To fix the problem, we tagged statements that may generate
rows into the binary log and thence the warning messages are
only printed out when the appropriate conditions hold and rows
might be changed.
The thd->variables.option_bits & OPTION_BIN_LOG is currently abused:
it's both a system variable and an implementation switch. The current
approach to this option bit breaks the session variable encapsulation.
Besides it is allowed to change @@session.sql_bin_log within a
transaction what may lead to not correctly logging a transaction.
To fix the problems, we created a thd->variables variable to represent
the "sql_log_bin" and prohibited its update inside a transaction or
sub-statement.
The problem was that TRUNCATE TABLE didn't take a exclusive
lock on a table if it resorted to truncating via delete of
all rows in the table. Specifically for InnoDB tables, this
could break proper isolation as InnoDB ends up aborting some
granted locks when truncating a table.
The solution is to take a exclusive metadata lock before
TRUNCATE TABLE can proceed. This guarantees that no other
transaction is using the table.
Incompatible change: Truncate via delete no longer fails
if sql_safe_updates is activated (this was a undocumented
side effect).
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
------------------------------------------------------------
revno: 3094
revision-id: vasil.dimov@oracle.com-20100513074652-0cvlhgkesgbb2bfh
parent: vasil.dimov@oracle.com-20100512173700-byf8xntxjur1hqov
committer: Vasil Dimov <vasil.dimov@oracle.com>
branch nick: mysql-trunk-innodb
timestamp: Thu 2010-05-13 10:46:52 +0300
message:
Followup to Bug#51920, fix binlog.binlog_killed
This is a followup to the fix of
Bug#51920 Innodb connections in row lock wait ignore KILL until lock wait
timeout
in that fix (rb://279) the behavior was changed to honor when a trx is
interrupted during lock wait, but the returned error code was still
"lock wait timeout" when it should be "interrupted".
This change fixes the non-deterministically failing test binlog.binlog_killed,
that failed like this:
binlog.binlog_killed 'stmt' [ fail ]
Test ended at 2010-05-12 11:39:08
CURRENT_TEST: binlog.binlog_killed
mysqltest: At line 208: query 'reap' failed with wrong errno 1205: 'Lock wait timeout exceeded; try restarting transaction', instead of 0...
Approved by: Sunny Bains (rb://344)
------------------------------------------------------------
This merge is non-trivial since it has to introduce the DB_INTERRUPTED
error code.
Also revert vasil.dimov@oracle.com-20100408165555-9rpjh24o0sa9ad5y
which adjusted the binlog.binlog_killed test to the new (wrong) behavior
This patch fixes two problems described as follows:
1 - If there is an on-going transaction and a temporary table is created or
dropped, any failed statement that follows the "create" or "drop commands"
triggers a rollback and by consequence the slave will go out sync because
the binary log will have a wrong sequence of events.
To fix the problem, we changed the expression that evaluates when the
cache should be flushed after either the rollback of a statment or
transaction.
2 - When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options. For that reason, if
the transaction had updated only transactional engines and was rolled
back at the end (.e.g due to a deadlock) the changes were not written
to the binary log, including the creation of the temporary table.
To fix the problem, we have set the OPTION_KEEP_LOG into the thd->options
when a "CREATE TEMPORARY TABLE SELECT * FROM" is executed.
Bug#20837 Apparent change of isolation level during transaction,
Bug#46527 COMMIT AND CHAIN RELEASE does not make sense,
Bug#53343 completion_type=1, COMMIT/ROLLBACK AND CHAIN don't
preserve the isolation level
Bug#53346 completion_type has strange effect in a stored
procedure/prepared statement
Make thd->tx_isolation mean strictly "current transaction
isolation level"
Make thd->variables.tx_isolation mean "current session isolation
level".
The current transaction isolation level is now established
at transaction start. If there was a SET TRANSACTION
ISOLATION LEVEL statement, the value is taken from it.
Otherwise, the session value is used.
A change in a session value, made while a transaction is active,
whereas still allowed, no longer has any effect on the
current transaction isolation level. This is an incompatible
change.
A change in a session isolation level, made while there is
no active transaction, overrides SET TRANSACTION statement,
if there was any.
Changed the impelmentation to not look at @@session.completion_type
in the parser, and thus fixed Bug#53346.
Changed the parser to not allow AND NO CHAIN RELEASE,
and thus fixed Bug#46527.
Changed the transaction API to take the current transaction
isolation level into account:
- BEGIN/COMMIT now do preserve the current transaction
isolation level if chaining is on.
- implicit commit, XA COMMIT or XA ROLLBACK or autocommit don't.
The test was used to fail because of
UPDATE t3,t4 SET t3.a=t4.a + bug27417(1);
did not prescribe the order of two row operations implied by the update.
Fixed with forcing the order with adding a where condition w/o
affecting the former bug fixes logics.
Clarified error messages related to unsafe statements:
- avoid the internal technical term "row injection"
- use 'binary log' instead of 'binlog'
- avoid the word 'unsafeness'
parallel mode
The failure has nothing to do with parallel, but rather on the
order the tests are executed. In this case, the test
binlog_tmp_table (lets call it test2) was not ensuring that the
binary logs would be reset when it started. Later the test issues
a mysqlbinlog .../master-bin.000002 | mysql ... If the test that
was executed before this one (lets call it test1) had issued a
flush logs, then the file in use in test1 (master-bin.000002)
would not actually match the one that was expected. Eventually,
this would cause the statements logged in test1 to be replayed,
instead of the ones logged in the beginning of test2.
We fix this by:
1. adding RESET MASTER to the beginning of binlog_tmp_table
2. setting dynamically the file to use in binlog_tmp_table
Only #1 was needed, but the two make the tests cases more robust.
transaction
BUG#52616 Temp table prevents switch binlog format from STATEMENT to ROW
Before the WL#2687 and BUG#46364, every non-transactional change that happened
after a transactional change was written to trx-cache and flushed upon
committing the transaction. WL#2687 and BUG#46364 changed this behavior and
non-transactional changes are now written to the binary log upon committing
the statement.
A binary log event is identified as transactional or non-transactional through
a flag in the Log_event which is set taking into account the underlie storage
engine on what it is stems from. In the current bug, this flag was not being
set properly when the DROP TEMPORARY TABLE was executed.
However, while fixing this bug we figured out that changes to temporary tables
should be always written to the trx-cache if there is an on-going transaction.
Otherwise, binlog events in the reversed order would be produced.
Regarding concurrency, keeping changes to temporary tables in the trx-cache is
also safe as temporary tables are only visible to the owner connection.
In this patch, we classify the following statements as unsafe:
1 - INSERT INTO t_myisam SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_myisam
3 - CREATE TEMPORARY TABLE t_myisam_temp SELECT * FROM t_myisam
On the other hand, the following statements are classified as safe:
1 - INSERT INTO t_innodb SELECT * FROM t_myisam_temp
2 - INSERT INTO t_myisam_temp SELECT * FROM t_innodb
The patch also guarantees that transactions that have a DROP TEMPORARY are
always written to the binary log regardless of the mode and the outcome:
commit or rollback. In particular, the DROP TEMPORARY is extended with the
IF EXISTS clause when the current statement logging format is set to row.
Finally, the patch allows to switch from STATEMENT to MIXED/ROW when there
are temporary tables but the contrary is not possible.
Conflicts:
Text conflict in mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result
Text conflict in sql/log.cc
Text conflict in sql/set_var.cc
Text conflict in sql/sql_class.cc
BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
