Fix old_mode flags conflict between OLD_MODE_NO_NULL_COLLATION_IDS
and OLD_MODE_LOCK_ALTER_TABLE_COPY.
Both flags used to be 1 << 6, now OLD_MODE_LOCK_ALTER_TABLE_COPY changed
to be 1 << 7
In any test that uses wait_all_purged.inc, ensure that InnoDB tables
will be created without persistent statistics.
This is a follow-up to commit cd04673a17
after a similar failure was observed in the innodb_zip.blob test.
This imports and adapts a number of MySQL 5.7 test cases that are
applicable to MariaDB.
Some tests for old bug fixes are not that relevant because the code
has been refactored since then (especially starting with
MariaDB Server 10.6), and the tests would not reproduce the
original bug if the fix was reverted.
In the test innodb_fts.opt, there are many duplicate MATCH ranks, which
would make the results nondeterministic. The test was stabilized by
changing some LIMIT clauses or by adding sorted_result in those cases
where the purpose of a test was to show that no sorting took place
in the server.
In the test innodb_fts.phrase, MySQL 5.7 would generate FTS_DOC_ID that
are 1 larger than in MariaDB. In innodb_fts.index_table the difference is 2.
This is because in MariaDB, fts_get_next_doc_id() post-increments
cache->next_doc_id, while MySQL 5.7 pre-increments it.
Reviewed by: Thirunarayanan Balathandayuthapani
The motivation of introducing the parameter
innodb_purge_rseg_truncate_frequency in
mysql/mysql-server@28bbd66ea5 and
mysql/mysql-server@8fc2120fed
seems to have been to avoid stalls due to freeing undo log pages
or truncating undo log tablespaces. In MariaDB Server,
innodb_undo_log_truncate=ON should be a much lighter operation
than in MySQL, because it will not involve any log checkpoint.
Another source of performance stalls should be
trx_purge_truncate_rseg_history(), which is shrinking the history list
by freeing the undo log pages whose undo records have been purged.
To alleviate that, we will introduce a purge_truncation_task that will
offload this from the purge_coordinator_task. In that way, the next
innodb_purge_batch_size pages may be parsed and purged while the pages
from the previous batch are being freed and the history list being shrunk.
The processing of innodb_undo_log_truncate=ON will still remain the
responsibility of the purge_coordinator_task.
purge_coordinator_state::count: Remove. We will ignore
innodb_purge_rseg_truncate_frequency, and act as if it had been
set to 1 (the maximum shrinking frequency).
purge_coordinator_state::do_purge(): Invoke an asynchronous task
purge_truncation_callback() to free the undo log pages.
purge_sys_t::iterator::free_history(): Free those undo log pages
that have been processed. This used to be a part of
trx_purge_truncate_history().
purge_sys_t::clone_end_view(): Take a new value of purge_sys.head
as a parameter, so that it will be updated while holding exclusive
purge_sys.latch. This is needed for race-free access to the field
in purge_truncation_callback().
Reviewed by: Vladislav Lesin
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
In particular:
* @@debug
deprecated since 5.5.37
* sr_YU locale
deprecated since 10.0.11
* "engine_condition_pushdown" in the @@optimizer_switch
deprecated since 10.1.1
* @@date_format, @@datetime_format, @@time_format, @@max_tmp_tables
deprecated since 10.1.2
* @@wsrep_causal_reads
deprecated since 10.1.3
* "parser" in mroonga table comment
deprecated since 10.2.11
Let us avoid inserting the rows fid=714 and fid=715, because we would
evaluate g=NULL for them, and NULL values are not allowed in InnoDB
SPATIAL INDEX.
Also, let the test run on any page size, and on non-debug builds.
This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.
rtr_ins_enlarge_mbr(): Relax the assertion that was added in
commit f27e9c8947
to cover also table-rebuilding DDL. We only need
btr_cur->rtr_info->thr for acquiring R-tree locks,
and the thread that is executing a DDL operation has exclusive
access to the being-built index or the copy of the being-rebuilt table.
In MariaDB, we have a confusing problem where:
* The transaction_isolation option can be set in a configuration file, but it cannot be set dynamically.
* The tx_isolation system variable can be set dynamically, but it cannot be set in a configuration file.
Therefore, we have two different names for the same thing in different contexts. This is needlessly confusing, and it complicates the documentation. The same thing applys for transaction_read_only.
MySQL 5.7 solved this problem by making them into system variables. https://dev.mysql.com/doc/relnotes/mysql/5.7/en/news-5-7-20.html
This commit takes a similar approach by adding new system variables and marking the original ones as deprecated. This commit also resolves some legacy problems related to SET STATEMENT and transaction_isolation.
The main difference in code path between EQ_REF and REF is that for
REF we have to do an extra read_next on the index to check that there
is no more matching rows.
Before this patch we added a preference of EQ_REF by ensuring that REF
would always estimate to find at least 2 rows.
This patch adds the cost of the extra key read_next to REF access and
removes the code that limited REF to at least 2 rows. For some queries
this can have a big effect as the total estimated rows will be halved
for each REF table with 1 rows.
multi_range cost calculations are also changed to take into account
the difference between EQ_REF and REF.
The effect of the patch to the test suite:
- About 80 test case changed
- Almost all changes where for EXPLAIN where estimated rows for REF
where changed from 2 to 1.
- A few test cases using explain extended had a change of 'filtered'.
This is because of the estimated rows are now closer to the
calculated selectivity.
- A very few test had a change of table order.
This is because the change of estimated rows from 2 to 1 or the small
cost change for REF
(main.subselect_sj_jcl6, main.group_by, main.dervied_cond_pushdown,
main.distinct, main.join_nested, main.order_by, main.join_cache)
- No key statistics and the estimated rows are now smaller which cased
estimated filtering to be lower.
(main.subselect_sj_mat)
- The number of total rows are halved.
(main.derived_cond_pushdown)
- Plans with 1 row changed to use RANGE instead of REF.
(main.group_min_max)
- ALL changed to REF
(main.key_diff)
- Key changed from ref + index_only to PRIMARY key for InnoDB, as
OPTIMIZER_ROW_LOOKUP_COST + OPTIMIZER_ROW_NEXT_FIND_COST is smaller than
OPTIMIZER_KEY_LOOKUP_COST + OPTIMIZER_KEY_NEXT_FIND_COST.
(main.join_outer_innodb)
- Cost changes printouts
(main.opt_trace*)
- Result order change
(innodb_gis.rtree)
This includes all test changes from
"Changing all cost calculation to be given in milliseconds"
and forwards.
Some of the things that caused changes in the result files:
- As part of fixing tests, I added 'echo' to some comments to be able to
easier find out where things where wrong.
- MATERIALIZED has now a higher cost compared to X than before. Because
of this some MATERIALIZED types have changed to DEPENDEND SUBQUERY.
- Some test cases that required MATERIALIZED to repeat a bug was
changed by adding more rows to force MATERIALIZED to happen.
- 'Filtered' in SHOW EXPLAIN has in many case changed from 100.00 to
something smaller. This is because now filtered also takes into
account the smallest possible ref access and filters, even if they
where not used. Another reason for 'Filtered' being smaller is that
we now also take into account implicit filtering done for subqueries
using FIRSTMATCH.
(main.subselect_no_exists_to_in)
This is caluculated in best_access_path() and stored in records_out.
- Table orders has changed because more accurate costs.
- 'index' and 'ALL' for small tables has changed to use 'range' or
'ref' because of optimizer_scan_setup_cost.
- index can be changed to 'range' as 'range' optimizer assumes we don't
have to read the blocks from disk that range optimizer has already read.
This can be confusing in the case where there is no obvious where clause
but instead there is a hidden 'key_column > NULL' added by the optimizer.
(main.subselect_no_exists_to_in)
- Scan on primary clustered key does not report 'Using Index' anymore
(It's a table scan, not an index scan).
- For derived tables, the number of rows is now 100 instead of 2,
which can be seen in EXPLAIN.
- More tests have "Using index for group by" as the cost of this
optimization is now more correct (lower).
- A primary key could be preferred for a normal key, even if it would
access more rows, as it's faster to do 1 lokoup and 3 'index_next' on a
clustered primary key than one lookup trough a secondary.
(main.stat_tables_innodb)
Notes:
- There was a 4.7% more calls to best_extension_by_limited_search() in
the main.greedy_optimizer test. However examining the test results
it looked that the plans where slightly better (eq_ref where more
chained together) so I assume this is ok.
- I have verified a few test cases where there was notable/unexpected
changes in the plan and in all cases the new optimizer plans where
faster. (main.greedy_optimizer and some others)
The original code was mostly rule based and preferred clustered or
covering indexed independent of cost.
There where a few test changes:
- Some test changed from using filesort to index or table scan. This
happened when most of the rows had to be sorted and the ORDER BY could
use covering or a clustered index (innodb_mysql, create_spatial_index).
- Some test changed range to filesort. This where mainly because the range
was scanning most of the rows or using index scan + row lookup and
filesort with table scan is cheaper. (order_by).
- Change in join_cache was because sorting 2 rows is faster than retrieving
10 rows.
- In selectivity_innodb.test one test changed to use a cheaper index.
