binlog_space_limit is a variable in Percona server used to limit the total
size of all binary logs.
This implementation is based on code from Percona server 5.7.
In MariaDB we decided to call the variable max-binlog-total-size to be
similar to max-binlog-size. This makes it easier to find in the output
from 'mariadbd --help --verbose'). MariaDB will also support
binlog_space_limit for compatibility with Percona.
Some internal notes to explain implementation notes:
- When running MariaDB does not delete binary logs that are either
used by slaves or have active xid that are not yet committed.
Some implementation notes:
- max-binlog-total-size is by default 0 (no limit).
- max-binlog-total-size can be changed without server restart.
- Binlog file sizes are checked on startup, or if
max-binlog-total-size is set to a value > 0, not for every log write.
The total size of all binary logs is cached and dynamically updated
when updating the binary log on binary log rotation.
- max-binlog-total-size is checked against existing log files during
serverstart, binlog rotation, FLUSH LOGS, when writing to binary log
or when max-binlog-total-size changes value.
- Option --slave-connections-needed-for-purge with 1 as default added.
This allows one to ensure that we do not delete binary logs if there
is less than 'slave-connections-needed-for-purge' connected.
Without this option max-binlog-total-size would potentially delete
binlogs needed by slaves on server startup or when a slave disconnects
as there are then no connected slaves to protect active binlogs.
- PURGE BINARY LOGS TO ... will be executed as if
slave-connectitons-needed-for-purge would be zero. In other words
it will do the purge even if there is no slaves connected. If there
are connected slaves working on the logs, these will be protected.
- If binary log is on and max-binlog-total_size <> 0 then the status
variable 'Binlog_disk_use' shows the current size of all old binary
logs + the state of the current one.
- Removed test of strcmp(log_file_name, log_info.log_file_name) in
purge_logs_before_date() as this is tested in can_purge_logs()
- To avoid expensive calls of log_in_use() we cache the result for the
last log that is in use by a slave. Future calls to can_purge_logs()
for this binary log will be quickly detected and false will be returned
until a slave starts working on a new log.
- Note that after a binary log rotation caused by max_binlog_size,
the last log will not be purged directly as it is still in use
internally. The next binary log write will purge binlogs if needed.
Reviewer:Kristian Nielsen <knielsen@knielsen-hq.org>
This reverts commit c37b2087b4.
In c37b20887, when re-binlogging a GTID event on a replica,
it will overwrite the thread_id from the primary to be the
value of the slave applier (SQL thread or parallel worker).
This should be the value of the original thread_id on the
master connection though, to both help track temporary
tables, and be consistent with Query_log_event.
Reverting the commit to re-target 11.5, so we can re-test
with the corrected thread_id.
Improve the performance of slave connect using B+-Tree indexes on each binlog
file. The index allows fast lookup of a GTID position to the corresponding
offset in the binlog file, as well as lookup of a position to find the
corresponding GTID position.
This eliminates a costly sequential scan of the starting binlog file
to find the GTID starting position when a slave connects. This is
especially costly if the binlog file is not cached in memory (IO
cost), or if it is encrypted or a lot of slaves connect simultaneously
(CPU cost).
The size of the index files is generally less than 1% of the binlog data, so
not expected to be an issue.
Most of the work writing the index is done as a background task, in
the binlog background thread. This minimises the performance impact on
transaction commit. A simple global mutex is used to protect index
reads and (background) index writes; this is fine as slave connect is
a relatively infrequent operation.
Here are the user-visible options and status variables. The feature is on by
default and is expected to need no tuning or configuration for most users.
binlog_gtid_index
On by default. Can be used to disable the indexes for testing purposes.
binlog_gtid_index_page_size (default 4096)
Page size to use for the binlog GTID index. This is the size of the nodes
in the B+-tree used internally in the index. A very small page-size (64 is
the minimum) will be less efficient, but can be used to stress the
BTree-code during testing.
binlog_gtid_index_span_min (default 65536)
Control sparseness of the binlog GTID index. If set to N, at most one
index record will be added for every N bytes of binlog file written.
This can be used to reduce the number of records in the index, at
the cost only of having to scan a few more events in the binlog file
before finding the target position
Two status variables are available to monitor the use of the GTID indexes:
Binlog_gtid_index_hit
Binlog_gtid_index_miss
The "hit" status increments for each successful lookup in a GTID index.
The "miss" increments when a lookup is not possible. This indicates that the
index file is missing (eg. binlog written by old server version
without GTID index support), or corrupt.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This patch augments Gtid_log_event with the user thread-id.
In particular that compensates for the loss of this info in
Rows_log_events.
Gtid_log_event::thread_id gets visible in mysqlbinlog output like
#231025 16:21:45 server id 1 end_log_pos 537 CRC32 0x1cf1d963 GTID 0-1-2 ddl thread_id=10
as 64 bit unsigned integer.
While the size of Gtid event has grown by 8-9 bytes
replication from OLD <-> NEW is not affected by it.
This work was started by the late Sujatha Sivakumar.
Brandon Nesterenko took it over, reviewed initial patches and extended
the work.
Reviewed-by: <andrei.elkin@mariadb.com>
Summary
=======
With FULL_NODUP mode, before image inclues all columns and after
image inclues only the changed columns. flashback will swap the
value of changed columns from after image to before image.
For example:
BI: c1, c2, c3_old, c4_old
AI: c3_new, c4_new
flashback will reconstruct the before and after images to
BI: c1, c2, c3_new, c4_new
AI: c3_old, c4_old
Implementation
==============
When parsing the before and after image, position and length of
the fields are collected into ai_fields and bi_fields, if it is an
Update_rows_event and the after image doesn't includes all columns.
The changed fields are swapped between bi_fields and ai_fields.
Then it recreates the before image and after image by using
bi_fields and ai_fields. nullbit will be set to 1 if the
field is NULL, otherwise nullbit will be 0.
It also optimized flashback a little bit.
- calc_row_event_length is used instead of print_verbose_one_row
- swap_buff1 and swap_buff2 are removed.
The binlog.flashback test tries to run using the stmt and mix
binlog_format combinations (because it includes have_log_bin.inc),
yet are meaningless tests because the server starts with the
--flashback option, forcing binlog_format=row.
This patch optimizes test time by removing the stmt and mix format
combinations from running.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
This patch provides a new mode FULL_NODUP to binlog_row_image system
variable. With FULL_NODUP mode, all columns are included in before
image, but only updated columns are included in after image for UPDATE.
While all columns are included in the after image for INSERT.
FULL_NODUP is for replacing FULL mode. It includes all data of
the before and after image as FULL mode, but it uses less storage
especially in the case that only a few columns are updated.
Note: It will binlog full before and after image for all modes if the
table has no primary key. FULL_NODUP follows the behavior.
Calling SHOW BINLOG EVENTS FROM <offset> with an invalid offset
writes error messages into the server log about invalid reads. The
read errors that occur from this command should only be relayed back
to the user though, and not written into the server log. This is
because they are read-only and have no impact on server operation,
and the client only need be informed to correct the parameter.
This patch fixes this by omitting binary log read errors from the
server when the invocation happens from SHOW BINLOG EVENTS.
Additionally, redundant error messages are omitted when calling the
string based read_log_event from the IO_Cache based read_log_event,
as the later already will report the error of the former.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
Andrei Elkin <andrei.elkin@mariadb.com>
Reset the GTID sequence at the start of test so earlier run tests does not
influence the expected GTID sequence.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Compute binlog checksums (when enabled) already when writing events
into the statement or transaction caches, where before it was done
when the caches are copied to the real binlog file. This moves the
checksum computation outside of holding LOCK_log, improving
scalabitily.
At stmt/trx cache write time, the final end_log_pos values are not
known, so with this patch these will be set to 0. Events that are
written directly to the binlog file (not through stmt/trx cache) keep
the correct end_log_pos value. The GTID and COMMIT/XID events at the
start and end of event groups are written directly, so the zero
end_log_pos is only for events in the middle of event groups, which
do not negatively affect replication.
An option --binlog-legacy-event-pos, off by default, is provided to
disable this behavior to provide backwards compatibility with any
external applications that might rely on end_log_pos in events in the
middle of event groups.
Checksums cannot be pre-computed when binlog encryption is enabled, as
encryption relies on correct end_log_pos to provide part of the
nonce/IV.
Checksum pre-computation is also disabled for WSREP/Galera, as it uses
events differently in its write-sets and so on. Extending pre-computation of
checksums to Galera where it makes sense could be added in a future patch.
The current --binlog-checksum configuration is saved in
binlog_cache_data at transaction start and used to pre-compute
checksums in cache, if applicable. When the cache is later copied to
the binlog, a check is made if the saved value still matches the
configured global value; if so, the events are block-copied directly
into the binlog file. If --binlog-checksum was changed during the
transaction, events are re-written to the binlog file one-by-one and
the checksums recomputed/discarded as appropriate.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
This is a preparatory commit for pre-computing checksums outside of
holding LOCK_log, no functional changes.
Which checksum algorithm is used (if any) when writing an event does not
belong in the event, it is a property of the log being written to.
Instead decide the checksum algorithm when constructing the
Log_event_writer object, and store it there.
Introduce a client-only Log_event::read_checksum_alg to be able to
print the checksum read, and a
Format_description_log_event::source_checksum_alg which is the
checksum algorithm (if any) to use when reading events from a log.
Also eliminate some redundant `enum` keywords on the enum_binlog_checksum_alg
type.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The MDEV-29693 conflict resolution is from Monty, as well as is
a bug fix where ANALYZE TABLE wrongly built histograms for
single-column PRIMARY KEY.
Also includes a fix for safe_malloc error reporting.
Other things:
- Copied main.log_slow from 10.4 to avoid mtr issue
Disabled test:
- spider/bugfix.mdev_27239 because we started to get
+Error 1429 Unable to connect to foreign data source: localhost
-Error 1158 Got an error reading communication packets
- main.delayed
- Bug#54332 Deadlock with two connections doing LOCK TABLE+INSERT DELAYED
This part is disabled for now as it fails randomly with different
warnings/errors (no corruption).
In particular:
* @@debug
deprecated since 5.5.37
* sr_YU locale
deprecated since 10.0.11
* "engine_condition_pushdown" in the @@optimizer_switch
deprecated since 10.1.1
* @@date_format, @@datetime_format, @@time_format, @@max_tmp_tables
deprecated since 10.1.2
* @@wsrep_causal_reads
deprecated since 10.1.3
* "parser" in mroonga table comment
deprecated since 10.2.11
In `pseudo_slave_mode=1` aka "psedo-slave" mode any prepared XA
transaction disconnects from the user session, as if the user
connection drops. The xid of such transaction remains in the server,
and should the prepared transaction be read-only, it is marked.
The marking makes sure that the following termination of the
read-only transaction ends up with ER_XA_RBROLLBACK.
This did not take place actually for `pseudo_slave_mode=1` read-only.
Fixed with checking the read-only status of a prepared transaction
at time it disconnects from the `pseudo_slave_mode=1` session, to mark
its xid when that's the case.
This patch adds for "--ps-protocol" second execution
of queries "SELECT".
Also in this patch it is added ability to disable/enable
(--disable_ps2_protocol/--enable_ps2_protocol) second
execution for "--ps-prototocol" in testcases.
This patch adds a way to override default collations
(or "character set collations") for desired character sets.
The SQL standard says:
> Each collation known in an SQL-environment is applicable to one
> or more character sets, and for each character set, one or more
> collations are applicable to it, one of which is associated with
> it as its character set collation.
In MariaDB, character set collations has been hard-coded so far,
e.g. utf8mb4_general_ci has been a hard-coded character set collation
for utf8mb4.
This patch allows to override (globally per server, or per session)
character set collations, so for example, uca1400_ai_ci can be set as a
character set collation for Unicode character sets
(instead of compiled xxx_general_ci).
The array of overridden character set collations is stored in a new
(session and global) system variable @@character_set_collations and
can be set as a comma separated list of charset=collation pairs, e.g.:
SET @@character_set_collations='utf8mb3=uca1400_ai_ci,utf8mb4=uca1400_ai_ci';
The variable is empty by default, which mean use the hard-coded
character set collations (e.g. utf8mb4_general_ci for utf8mb4).
The variable can also be set globally by passing to the server startup command
line, and/or in my.cnf.
