failed or late ER_PERIOD_FIELD_WRONG_ATTRIBUTES upon attempt to create
existing table
Analysis: Error state is not stored when field is checked in
Table_period_info::check_field()
Fix: Store error state by setting res to true.
The issue was:
T1, a parallel slave worker thread, is waiting for another worker thread to
commit. While waiting, it has the MDL_BACKUP_COMMIT lock.
T2, working for mariabackup, is doing BACKUP STAGE BLOCK_COMMIT and blocks
all commits.
This causes a deadlock as the thread T1 is waiting for can't commit.
Fixed by moving locking of MDL_BACKUP_COMMIT from ha_commit_trans() to
commit_one_phase_2()
Other things:
- Added a new argument to ha_comit_one_phase() to signal if the
transaction was a write transaction.
- Ensured that ha_maria::implicit_commit() is always called under
MDL_BACKUP_COMMIT. This code is not needed in 10.5
- Ensure that MDL_Request values 'type' and 'ticket' are always
initialized. This makes it easier to check the state of the MDL_Request.
- Moved thd->store_globals() earlier in handle_rpl_parallel_thread() as
thd->init_for_queries() could use a MDL that could crash if store_globals
where not called.
- Don't call ha_enable_transactions() in THD::init_for_queries() as this
is both slow (uses MDL locks) and not needed.
MDEV-20578 Got error 126 when executing undo undo_key_delete
upon Aria crash recovery
The crash happens in this scenario:
- Table with unique keys and non unique keys
- Batch insert (LOAD DATA or INSERT ... SELECT) with REPLACE
- Some insert succeeds followed by duplicate key error
In the above scenario the table gets corrupted.
The bug was that we don't generate any undo entry for the
failed insert as the whole insert can be ignored by undo.
The code did however not take into account that when bulk
insert is used, we would write cached keys to the file on
failure and undo would wrongly ignore these.
Fixed by moving the writing of the cache keys after we write
the aborted-insert event to the log.
Rowid Filter check is just like Index Condition Pushdown check: before
we check the filter, we must check if we have walked out of the range
we are scanning. (If we did, we should return, and not continue the scan).
Consequences of this:
- Rowid filtering doesn't work for keys that have partially-covered
blob columns (just like Index Condition Pushdown)
- The rowid filter function has three return values: CHECK_POS (passed)
CHECK_NEG (filtered out), CHECK_OUT_OF_RANGE.
All of the above is implemented in this patch
If a transaction had no effect due to INSERT IGNORE and a new
transaction was started with START TRANSACTION without committing
the previous one, the server crashed on assertion when starting
a new wsrep transaction.
As a fix, refined the condition to do wsrep_commit_empty() at the end
of the ha_commit_trans().
In main.index_merge_myisam we remove the test that was added in
commit a2d24def8c because
it duplicates the test case that was added in
commit 5af12e4635.
was restored.
Optionally rollback prepared XA's on "mariabackup --prepare".
The fix MUST NOT be ported on 10.5+, as MDEV-742 fix solves the issue for
slaves.
The default keyread_time() was optimized for blocks and not suitable for
HEAP. The effect was the HEAP prefered table scans over ranges for btree
indexes.
Fixed also get_sweep_read_cost() for HEAP tables.
Cause:
* when autocommit=0 (or transaction is issued by user),
`ha_commit_trans` is called twice on ALTER TABLE, causing a duplicated
insert into `transaction_registry` (ER_DUP_ENTRY).
Solution:
* ALTER TABLE makes an implicit commit by a second call. We actually
need to make an insert only when it is a real commit. So is_real
variable is additionally checked.
* do not allow versioned table to be without versioned (non-system) fields
* prohibit changing field versioning, when removing table versioning
* handle CREATE...SELECT as well
MDEV-19486 and one more similar bug appeared because handler::write_row() interface
welcomes to modify buffer by storage engine. But callers are not ready for that
thus bugs are possible in future.
handler::write_row():
handler::ha_write_row(): make argument const
cmake -DCMAKE_C_COMPILER=clang -DCMAKE_CXX_COMPILER=clang++ -DCMAKE_BUILD_TYPE=Debug
Maintainer mode makes all warnings errors. This patch fix warnings. Mostly about
deprecated `register` keyword.
Too much warnings came from Mroonga and I gave up on it.
Make Field::is_equal() const and return bool as it's a naturally fitting
type for it. Also it's agrument was narrowed to Column_definition.
InnoDB can change type of some columns by itself. InnoDB-specific code used to
reside in Field_xxx:is_equal() methods. Now engine-specific stuff was
moved to a virtual methods of handler::can_convert{string,varstring,blob,geom}.
These methods are called by Field::can_be_converted_by_engine() which is a
double dispatch pattern.
Some InnoDB-specific code still resides in compare_keys_but_name(). It should
be moved from here someday to handler::compare_key_parts(...) or similar.
IS_EQUAL_WITH_REINTERPRET_COMPATIBLE_CHARSET
IS_EQUAL_WITH_REINTERPRET_COMPATIBLE_CHARSET_BUT_COLLATE: both was removed
IS_EQUAL_NO, IS_EQUAL_YES are not needed now and should be removed
along with deprecated handler::check_if_incompatible_data().
HA_EXTENDED_TYPES_CONVERSION: was removed as such logic is not needed now by
server code.
ALTER_COLUMN_EQUAL_PACK_LENGTH: was renamed to a more generic
ALTER_COLUMN_TYPE_CHANGE_BY_ENGINE
followup for be5c432a42
ha_partition::calculate_checksum() has to invoke calculate_checksum()
for partitions unconditionally, not under (HA_HAS_OLD_CHECKSUM | HA_HAS_NEW_CHECKSUM).
Because the server uses ::info() to ask for a live checksum, while
calculate_checksum() must, precisely, calculate it the slow way,
also for tables that don't have the live checksum at all.
Also, fix the compilation on Windows (ha_checksum/ulonglong type mix).
Problem:
========
We have a Master/Master Setup on two servers, but are only writing to one of
those servers (so it is essentially Master/Slave) We upgraded from 10.1.* to
10.2.22 last week and starting with the upgrade, we are getting duplicate key
errors on the slave. BINLOG=mixed.
Analysis:
=========
This issue happens with LOCK TABLES and binlog_format=MIXED combination. When an
UNSAFE statement is encountered in 'MIXED' mode, it is logged in the form of
'ROW' format. For all the tables that are part of LOCK TABLES list their table maps
are written into the binary log. For each table in the list a check is
done to see if 'check_table_binlog_row_based_done' flag is set or not. If it is not set
a check process is initiated to see if table qualifies for row based binary
logging or not and 'check_table_binlog_row_based_done' is set. This flag will be
cleared at the time of closing thread tables.
But there can be special cases where the LOCK TABLES contains more number of
tables but the unsafe query is actually using subset of tables from LOCK TABLES
list.
For example: LOCK TABLES locks t1,t2,t3 but the unsafe statement makes use of
only two tables t1,t3. In this case the 'check_table_binlog_row_based_done' flag
is enabled for table 't2' while writing table map, but 'close_thread_tables'
function call will not reset this flag. Since the flag is not cleared for table
't2' even a safe statement which used t2 will be logged in the form of row based
format.
This leads to an assert on debug builds and causes duplicate entries in release
builds. In release builds a statement is logged in the form of both ROW and
STATEMENT format. This causes the slave to fail with duplicate key error.
Fix:
===
During 'close_thread_tables' when LOCK TABLE modes are active "ha_reset" is done
for all the tables which were part of current statement. As mentioned in the
example 'ha_reset' is called for tables 't1' and 't3'. This will clear the
'check_table_binlog_row_based_done' flag. At this point add a check for the rest
of the tables to see if 'check_table_binlog_row_based_done' is enabled or not.
If enabled clear the flag.
Some places didn't match the previous rules, making the Floor
address wrong.
Additional sed rules:
sed -i -e 's/Place.*Suite .*, Boston/Street, Fifth Floor, Boston/g'
sed -i -e 's/Suite .*, Boston/Fifth Floor, Boston/g'
make live checksum to be returned in handler::info(),
and slow table-scan checksum to be calculated in handler::checksum().
part of
MDEV-16249 CHECKSUM TABLE for a spider table is not parallel and saves all data in memory in the spider head by default
