Despite being included in the HAVE_valgrind define.
As such it's best differenciated from valgrind in the
server identifier as they have for the purposes a distinct
and different set of behaviours.
MSAN has its own set of test inclusions that that are different
from valgrind and such including "valgrind" in a server string that
gets tested for valgrind will incorrectly exclude some tests
that are suitable for MSAN but not valgrind.
There's a have_sanitizer system variable for exposing
the sanitizer being used so there's no need for
version verboseness.
Correct have_sanitizer system variable description to
include MSAN has been possible for a while.
This is needed to make it easy for users to automatically ignore long
char and varchars when using ANALYZE TABLE PERSISTENT.
These fields can cause problems as they will consume
'CHARACTERS * MAX_CHARACTER_LENGTH * 2 * number_of_rows' space on disk
during analyze, which can easily be much bigger than the analyzed table.
This commit adds a new user variable, analyze_max_length, default value 4G.
Any field that is bigger than this in bytes, will be ignored by
ANALYZE TABLE PERSISTENT unless it is specified in FOR COLUMNS().
While doing this patch, I noticed that we do not skip GEOMETRY columns from
ANALYZE TABLE, like we do with BLOB. This should be fixed when merging
to the 'main' branch. At the same time we should add a resonable default
value for analyze_max_length, probably 1024, like we have for
max_sort_length.
Although the `my_thread_id` type is 64 bits, binlog format specs
limits it to 32 bits in practice. (See also: MDEV-35706)
The writable SQL variable `pseudo_thread_id` didn’t realize this though
and had a range of `ULONGLONG_MAX` (at least `UINT64_MAX` in C/C++).
It consequentially accepted larger values silently, but only the lower
32 bits of whom gets binlogged; this could lead to inconsistency.
Reviewed-by: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
The LOCK_global_system_variables must not be held when taking mutexes
such as LOCK_commit_ordered and LOCK_log, as this causes inconsistent
mutex locking order that can theoretically cause the server to
deadlock.
To avoid this, temporarily release LOCK_global_system_variables in two
system variable update functions, like it is done in many other
places.
Enforce the correct locking order at server startup, to more easily
catch (in debug builds) any remaining wrong orders that may be hidden
elsewhere in the code.
Note that when this is merged to 11.4, similar unlock/lock of
LOCK_global_system_variables must be added in update_binlog_space_limit()
as is done in binlog_checksum_update() and fix_max_binlog_size(), as this
is a new function added in 11.4 that also needs the same fix. Tests will
fail with wrong mutex order until this is done.
Reviewed-by: Sergei Golubchik <serg@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Heap tables are allocated blocks to store rows according to
my_default_record_cache (mapped to the server global variable
read_buffer_size).
This causes performance issues when the record length is big
(> 1000 bytes) and the my_default_record_cache is small.
Changed to instead split the default heap allocation to 1/16 of the
allowed space and not use my_default_record_cache anymore when creating
the heap. The allocation is also aligned to be just under a power of 2.
For some test that I have been running, which was using record length=633,
the speed of the query doubled thanks to this change.
Other things:
- Fixed calculation of max_records passed to hp_create() to take
into account padding between records.
- Updated calculation of memory needed by heap tables. Before we
did not take into account internal structures needed to access rows.
- Changed block sized for memory_table from 1 to 16384 to get less
fragmentation. This also avoids a problem where we need 1K
to manage index and row storage which was not counted for before.
- Moved heap memory usage to a separate test for 32 bit.
- Allocate all data blocks in heap in powers of 2. Change reported
memory usage for heap to reflect this.
Reviewed-by: Sergei Golubchik <serg@mariadb.org>
Disallow changing @@gtid_domain_id while a temporary table is open in
STATEMENT or MIXED binlog mode. Otherwise, a slave may try to replicate
events refering to the same temporary table in parallel, using domain-based
out-of-order parallel replication. This is not valid, temporary tables are
only available for use within a single thread at a time.
One concrete consequence seen from this bug was a ROLLBACK on an
InnoDB temporary table running in one domain in parallel with DROP
TEMPORARY TABLE in another domain, causing an assertion inside InnoDB:
InnoDB: Failing assertion: table->get_ref_count() == 0 in
dict_sys_t::remove.
Use an existing error code that's somewhat close to the real issue
(ER_INSIDE_TRANSACTION_PREVENTS_SWITCH_GTID_DOMAIN_ID_SEQ_NO), to not add a
new error code in a GA release. When this is merged to the next GA release,
we could optionally introduce a new and more precise error code for an
attempt to change the domain_id while temporary tables are open.
Reviewed-by: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Implement variable legacy_xa_rollback_at_disconnect to support
backwards compatibility for applications that rely on the pre-10.5
behavior for connection disconnect, which is to rollback the
transaction (in violation of the XA specification).
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
Move memory allocations performed during Sys_var_gtid_binlog_state::do_check
to Sys_var_gtid_binlog_state::global_update where they will be freed before
the latter method returns.
(Variant 4, with @@optimizer_adjust_secondary_key_costs, reuse in two
places, and conditions are replaced with equivalent simpler forms in two more)
In best_access_path(), ReuseRangeEstimateForRef-3, the check
for whether
"all used key_part_i used key_part_i=const"
was incorrect: it may produced a "NO" answer for cases when we
had:
key_part1= const // some key parts are usable
key_part2= value_not_in_join_prefix //present but unusable
key_part3= non_const_value // unusable due to gap in key parts.
This caused the optimizer to fail to apply ReuseRangeEstimateForRef
heuristics. The consequence is poor query plan choice when the index
in question has very skewed data distribution.
The fix is enabled if its @@optimizer_adjust_secondary_key_costs flag
is set.
(Variant 2b: call greedy_search() twice, correct handling for limited
search_depth)
Modify the join optimizer to specifically try to produce join orders that
can short-cut their execution for ORDER BY..LIMIT clause.
The optimization is controlled by @@optimizer_join_limit_pref_ratio.
Default value 0 means don't construct short-cutting join orders.
Other value means construct short-cutting join order, and prefer it only
if it promises speedup of more than #value times.
In Optimizer Trace, look for these names:
* join_limit_shortcut_is_applicable
* join_limit_shortcut_plan_search
* join_limit_shortcut_choice
(With trivial fixes by sergey@mariadb.com)
Added option fix_innodb_cardinality to optimizer_adjust_secondary_key_costs
Using fix_innodb_cardinality disables the 'divide by 2' of rec_per_key_int
in InnoDB that in effect doubles the Cardinality for secondary keys.
This has the biggest effect for indexes where a few rows has the same key
value. Using this may also cause table scans for very small tables (which
in some cases may be better than an index scan).
The user visible effect is that 'SHOW INDEX FROM table_name' will for
InnoDB show the true Cardinality (and not 2x the real value). It will
also allow the optimizer to chose a better index in some cases as the
division by 2 could have a bad effect for tables with 2-5 identical values
per key.
A few notes about using fix_innodb_cardinality:
- It has direct affect for SHOW INDEX FROM table_name. SHOW INDEX
will also update the statistics in table share.
- The effect of fix_innodb_cardinality for query plans or EXPLAIN
is only visible after first open of the table. This is why one must
do a flush tables or use SHOW INDEX for the option to take effect.
- Using fix_innodb_cardinality can thus affect all user in their query
plans if they are using the same tables.
Because of this, it is strongly recommended that one uses
optimizer_adjust_secondary_key_costs=fix_innodb_cardinality mainly
in configuration files to not cause issues for other users.
The feedback plugin server_uid variable and the calculate_server_uid()
function is moved from feedback/utils.cc to sql/mysqld.cc
server_uid is added as a global variable (shown in 'show variables') and
is written to the error log on server startup together with server version
and server commit id.
We have an issue if a user have the following in a configuration file:
log_slow_filter="" # Log everything to slow query log
log_queries_not_using_indexes=ON
This set log_slow_filter to 'not_using_index' which disables
slow_query_logging of most queries.
In effect, on should never use log_slow_filter="" in config files but
instead use log_slow_filter=ALL.
Fixed by changing log_slow_filter="" that comes either from a
configuration file or from the command line, when starting to the server,
to log_slow_filter=ALL.
A warning will be printed when this happens.
Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
(backported from 10.6)
Correct the second parameter for strxnmov to prevent potential buffer
overflows. The second parameter must be one less than the size of the
input buffer to avoid writing past the end of the buffer.
While the second parameter is usually correct, there are exceptions
that need fixing.
This commit addresses the issue within frm_file_exists() and other
affected places.
In MariaDB up to 10.11, the test_if_cheaper_ordering() code (that tries
to optimizer how GROUP BY is executed) assumes that if a table scan is used
then if there is any index usable by GROUP BY it will be used.
The reason MySQL 10.4 provides a better plan is because of two differences:
- Plans using 'ref' has a cost of 1/10 of what it should be (as a
protection against table scans). This is why 'ref' is used in 10.4
and not in 10.5.
- When 'ref' is used, then GROUP BY will not use an index for GROUP BY.
In MariaDB 10.5 the chosen plan is a table scan (as it calculated to be
faster) but as 'ref' is not used, the test_if_cheaper_ordering()
optimizer phase decides (as ref is not usd) to use an index for GROUP BY,
which has bad performance.
Description of fix:
- All new code is protected by the "optimizer_adjust_secondary_key_costs"
variable, which is now a bit map, and is only executed if the option
"disable_forced_index_in_group_by" set.
- Corrects GROUP BY handling in test_if_cheaper_ordering() by making
the choise of using and index with GROUP BY cost based instead of rule
based.
- Adds TIME_FOR_COMPARE to all costs, when using group by, to make
read_time, index_scan_time and range_cost comparable.
Other things:
- Made optimizer_adjust_secondary_key_costs a bit map (compatible with old
code).
Notes:
Current code ignores costs for the algorithm used when doing GROUP
BY on the first table:
- Create an in-memory temporary table for handling group by and doing a
filesort of the result file
We can probably in 10.6 continue to ignore this cost.
This patch should NOT be merged to 11.0 series (not needed in 11.0).
optimizer-adjust_secondary_key_costs is added to provide 2 small
adjustments to the 10.x optimizer cost model. This can be used in the
case where the optimizer wrongly uses a secondary key instead of a
clustered primary key.
The reason behind this change is that MariaDB 10.x does not take into
account that for engines like InnoDB, that scanning a primary key can be
up to 7x faster than scanning a secondary key + read the row data trough
the primary key.
The different values for optimizer_adjust_secondary_key_costs are:
optimizer_adjust_secondary_key_costs=0
- No changes to current model
optimizer_adjust_secondary_key_costs=1
- Ensure that the cost of of secondary indexes has a cost of at
least 5x times the cost of a clustered primary key (if one exists).
This disables part of the worst_seek optimization described below.
optimizer_adjust_secondary_key_costs=2
- Disable "worst_seek optimization" and adjust filter cost slightly
(add cost of 1 if filter is used).
The idea behind 'worst_seek optimization' is that we limit the
cost for all non clustered ref access to the least of:
- best-rows-by-range (or all rows in no range found) / 10
- scan-time-table (roughly number of file blocks to scan table) * 3
In addition we also do not try to use rowid_filter if number of rows
estimated for 'ref' access is less than the worst_seek limitation.
The idea is that worst_seek is trying to take into account that if
we do a lot of accesses through a key, this is likely to be cached.
However it only does this for secondary keys, and not for clustered
keys or index only reads.
The effect of the worst_seek are:
- In some cases 'ref' will have a much lower cost than range or using
a clustered key.
- Some possible rowid filters for secondary keys will be ignored.
When implementing optimizer_adjust_secondary_key_costs=2, I noticed
that there is a slightly different costs for how ref+filter and
range+filter are calculated. This caused a lot of range and
range+filter to change to ref+filter, which is not good as
range+filter provides the optimizer a better estimate of how many
accepted rows there will be in the result set.
Adding a extra small cost (1 seek) when using filter mitigated the
above problems in almost all cases.
This patch should not be applied to MariaDB 11.0 as worst_seeks is
removed in 11.0 and the cost calculation for clustered keys, secondary
keys, index scan and filter is more exact.
Test case changes for --optimizer-adjust_secondary_key_costs=1
(Fix secondary key costs to be 5x of primary key):
- stat_tables_innodb:
- Complex change (probably ok as number of rows are really small)
- ref over 1 row changed to range over 10 rows with join buffer
- ref over 5 rows changed to eq_ref
- secondary ref over 1 row changed to ref of primary key over 4 rows
- Change of key to use longer key with index pushdown (a little
bit worse but not significant).
- Change to use secondary (1 row) -> primary (4 rows)
- rowid_filter_innodb:
- index_merge (2 rows) & ref (1) -> all (23 rows) -> primary eq_ref.
Test case changes for --optimizer-adjust_secondary_key_costs=2
(remove of worst_seeks & adjust filter cost):
- stat_tables_innodb:
- Join order change (probably ok as number of rows are really small)
- ref (5 rows) & ref(1 row) changed to range (10 rows & join buffer)
& eq_ref.
- selectivity_innodb:
- ref -> ref|filter (ok)
- rowid_filter_innodb:
- ref -> ref|filter (ok)
- range|filter (64 rows) changed to ref|filter (128 rows).
ok as ref|filter outputs wrong number of rows in explain.
- range, range_mrr_icp:
-ref (500 rows -> ALL (1000 rows) (ok)
- select_pkeycache, select, select_jcl6:
- ref|filter (2 rows) -> ref (2 rows) (ok)
- selectivity:
- ref -> ref_filter (ok)
- range:
- Change of 'filtered' but no stat or plan change (ok)
- selectivity:
- ref -> ref+filter (ok)
- Change of filtered but no plan change (ok)
- join_nested_jcl6:
- range -> ref|filter (ok as only 2 rows)
- subselect3, subselect3_jcl6:
- ref_or_null (4 rows) -> ALL (10 rows) (ok)
- Index_subquery (4 rows) -> ALL (10 rows) (ok)
- partition_mrr_myisam, partition_mrr_aria and partition_mrr_innodb:
- Uses ALL instead of REF for a key value that is the same for > 50%
of rows. (good)
order_by_innodb:
- range (200 rows) -> ref (20 rows)+filesort (ok)
- subselect_sj2_mat:
- One test changed. One ALL removed and replaced with eq_ref. Likely
to be better.
- join_cache:
- Changed ref over 60% of the rows to use hash join (ok)
- opt_tvc:
- Changed to use eq_ref instead of ref with plan change (probably ok)
- opt_trace:
- No worst/max seeks clipping (good).
- Almost double range_scan_time and index_scan_time (ok).
- rowid_filter:
- ref -> ref|filtered (ok)
- range|filter (77 rows) changed to ref|filter (151 rows). Proably
ok as ref|filter outputs wrong number of rows in explain.
Reviewer: Sergei Petrunia <sergey@mariadb.com>
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
Binary logging is now disabled for the queries run by SQL SERVICE.
The binlogging can be turned on with the 'SET SQL_LOG_BIN=On' query.
Conflicts:
sql/sql_prepare.cc
Conflicts:
sql/sql_prepare.cc
Updates to specific replication system variables need to target the
active primary connection to support multi-source replication. These
variables use the Sys_var_multi_source_ulonglong type. This class
uses offsets of the Master_info C++ class to generalize access to
its member variables.
The problem is that the Master_info class is not of standard layout,
and neither are many of its member variables, e.g. rli and
rli->relay_log. Because the class is not of standard layout, using
offsets to access member variables invokes undefined behavior.
This patch changes how Sys_var_multi_source_ulonglong accesses the
member variables of Master_info from using parameterized memory
offsets to “getter” function pointers.
Note that the size parameter and assertion are removed, as they are
no longer needed because the condition is guaranteed by compiler
type-safety checks.
Reviewed By:
============
Kristian Nielsen <knielsen@knielsen-hq.org>
(Variant#3: Allow cross-charset comparisons, use a special
CHARSET_INFO to create lookup keys. Review input addressed.)
Equalities that compare utf8mb{3,4}_general_ci strings, like:
WHERE ... utf8mb3_key_col=utf8mb4_value (MB3-4-CMP)
can now be used to construct ref[const] access and also participate
in multiple-equalities.
This means that utf8mb3_key_col can be used for key-lookups when
compared with an utf8mb4 constant, field or expression using '=' or
'<=>' comparison operators.
This is controlled by optimizer_switch='cset_narrowing=on', which is
OFF by default.
IMPLEMENTATION
Item value comparison in (MB3-4-CMP) is done using utf8mb4_general_ci.
This is valid as any utf8mb3 value is also an utf8mb4 value.
When making index lookup value for utf8mb3_key_col, we do "Charset
Narrowing": characters that are in the Basic Multilingual Plane (=BMP) are
copied as-is, as they can be represented in utf8mb3. Characters that are
outside the BMP cannot be represented in utf8mb3 and are replaced
with U+FFFD, the "Replacement Character".
In utf8mb4_general_ci, the Replacement Character compares as equal to any
character that's not in BMP. Because of this, the constructed lookup value
will find all index records that would be considered equal by the original
condition (MB3-4-CMP).
Approved-by: Monty <monty@mariadb.org>
This allows a user to to change the default value of MAX_SEL_ARGS (16000)
in the rare case where they neeed more generated SEL_ARGS (as part of
the range optimizer)
Raise notes if indexes cannot be used:
- in case of data type or collation mismatch (diferent error messages).
- in case if a table field was replaced to something else
(e.g. Item_func_conv_charset) during a condition rewrite.
Added option to write warnings and notes to the slow query log for
slow queries.
New variables added/changed:
- note_verbosity, with is a set of the following options:
basic - All old notes
unusable_keys - Print warnings about keys that cannot be used
for select, delete or update.
explain - Print unusable_keys warnings for EXPLAIN querys.
The default is 'basic,explain'. This means that for old installations
the only notable new behavior is that one will get notes about
unusable keys when one does an EXPLAIN for a query. One can turn all
of all notes by either setting note_verbosity to "" or setting sql_notes=0.
- log_slow_verbosity has a new option 'warnings'. If this is set
then warnings and notes generated are printed in the slow query log
(up to log_slow_max_warnings times per statement).
- log_slow_max_warnings - Max number of warnings written to
slow query log.
Other things:
- One can now use =ALL for any 'set' variable to set all options at once.
For example using "note_verbosity=ALL" in a config file or
"SET @@note_verbosity=ALL' in SQL.
- mysqldump will in the future use @@note_verbosity=""' instead of
@sql_notes=0 to disable notes.
- Added "enum class Data_type_compatibility" and changing the return type
of all Field::can_optimize*() methods from "bool" to this new data type.
Reviewer & Co-author: Alexander Barkov <bar@mariadb.com>
- The code that prints out the notes comes mainly from Alexander
Remove TLSv1.1 from the default tls_version system variable.
Output a warning if TLSv1.0 or TLSv1.1 are selected.
Thanks Tingyao Nian for the feature request.
A simple "SET SESSION gtid_seq_no= DEFAULT" did not work, it would straight
up crash the server! Also, explicitly setting gtid_seq_no to 0 gave an error
in --gtid-strict-mode=1.
Setting to DEFAULT or 0 should disable any prior setting of
gtid_seq_no, so that the next transaction is allocated the next GTID
in sequence, as normal.
Reviewed-by: Monty <monty@mariadb.org>
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
The new statistics is enabled by adding the "engine", "innodb" or "full"
option to --log-slow-verbosity
Example output:
# Pages_accessed: 184 Pages_read: 95 Pages_updated: 0 Old_rows_read: 1
# Pages_read_time: 17.0204 Engine_time: 248.1297
Page_read_time is time doing physical reads inside a storage engine.
(Writes cannot be tracked as these are usually done in the background).
Engine_time is the time spent inside the storage engine for the full
duration of the read/write/update calls. It uses the same code as
'analyze statement' for calculating the time spent.
The engine statistics is done with a generic interface that should be
easy for any engine to use. It can also easily be extended to provide
even more statistics.
Currently only InnoDB has counters for Pages_% and Undo_% status.
Engine_time works for all engines.
Implementation details:
class ha_handler_stats holds all engine stats. This class is included
in handler and THD classes.
While a query is running, all statistics is updated in the handler. In
close_thread_tables() the statistics is added to the THD.
handler::handler_stats is a pointer to where statistics should be
collected. This is set to point to handler::active_handler_stats if
stats are requested. If not, it is set to 0.
handler_stats has also an element, 'active' that is 1 if stats are
requested. This is to allow engines to avoid doing any 'if's while
updating the statistics.
Cloned or partition tables have the pointer set to the base table if
status are requested.
There is a small performance impact when using --log-slow-verbosity=engine:
- All engine calls in 'select' will be timed.
- IO calls for InnoDB reads will be timed.
- Incrementation of counters are done on local variables and accesses
are inline, so these should have very little impact.
- Statistics has to be reset for each statement for the THD and each
used handler. This is only 40 bytes, which should be neglectable.
- For partition tables we have to loop over all partitions to update
the handler_status as part of table_init(). Can be optimized in the
future to only do this is log-slow-verbosity changes. For this to work
we have to update handler_status for all opened partitions and
also for all partitions opened in the future.
Other things:
- Added options 'engine' and 'full' to log-slow-verbosity.
- Some of the new files in the test suite comes from Percona server, which
has similar status information.
- buf_page_optimistic_get(): Do not increment any counter, since we are
only validating a pointer, not performing any buf_pool.page_hash lookup.
- Added THD argument to save_explain_data_intern().
- Switched arguments for save_explain_.*_data() to have
always THD first (generates better code as other functions also have THD
first).
Introduce @@optimizer_switch flag: hash_join_cardinality
When it is on, use EITS statistics to produce tighter bounds for
hash join output cardinality.
Amended by Monty.
Reviewed by: Monty <monty@mariadb.org>
