The problem was that the introduction of max-thread-mem-used can cause
an allocation error very early, even before mysql_parse() is called.
As mysql_parse() calls thd->reset_for_next_command(), which called
clear_error(), the error number was lost.
Fixed by adding an option to have unique messages for each KILL
signal and change max-thread-mem-used to use this new feature.
This removes a lot of problems with the original approach, where
one could get errors signaled silenty almost any time.
ixed by moving clear_error() from reset_for_next_command() to
do_command(), before any memory allocation for the thread.
Related changes:
- reset_for_next_command() now have an optional parameter if we should
call clear_error() or not. By default it's called, but not anymore from
dispatch_command() which was the original problem.
- Added optional paramater to clear_error() to force calling of
reset_diagnostics_area(). Before clear_error() only called
reset_diagnostics_area() if there was no error, so we normally
called reset_diagnostics_area() twice.
- This change removed several duplicated calls to clear_error()
when starting a query.
- Reset max_mem_used on COM_QUIT, to protect against kill during
quit.
- Use fatal_error() instead of setting is_fatal_error (cleanup)
- Set fatal_error if max_thead_mem_used is signaled.
(Same logic we use for other places where we are out of resources)
CREATE/DROP TEMPORARY TABLE are not safe to optimistically replicate in
parallel with other transactions, so they need to be marked as "ddl" in the
binlog.
This was already done for stand-alone CREATE/DROP TEMPORARY. But temporary
tables can also be created and dropped inside a BEGIN...END transaction, and
such transactions were not marked as ddl. Nor was the DROP TEMPORARY TABLE
statement emitted implicitly when a client connection is closed.
So this patch adds such ddl mark for the missing cases.
The difference to Kristian's original patch is mainly a fix in
mysql_trans_commit_alter_copy_data() to remember the unsafe_rollback_flags
over the temporary commit.
Internal updates to system statistical tables could wrongly
trigger an additional total-order replication if wsrep_repli
-cate_myisam is enabled.
Fixed by adding a check to skip total-order replication for
stat tables.
Test: galera.galera_var_replicate_myisam_on
(like DROP TABLE) has been scheduled before conflicting DDL's (like INSERT)
are commited.
What makes these bugs hard to detect is that in most cases any wrong
schduling are caught by MDL locks. It's only when there are timing issues
that the bugs (usually deadlocks) are noticed.
This patch adds a DBUG_ASSERT() that detects, in parallel replication,
if a DDL is scheduled before any depending DML'S are commited.
It does this be checking if there are any conflicting replication locks
when the DDL is about to wait for getting it's MDL lock.
I also did some minor code cleanups in sql_base.cc to make this code
similar to other related code.
THAT ACTUALLY EXISTS
ANALYSIS:
=========
Stored functions updating a view where the view table has a
trigger defined that updates another table, fails reporting
an error that the table doesn't exist.
If there is a trigger defined on a table, a variable
'trg_event_map' will be set to a non-zero value after the
parsed tree creation. This indicates what triggers we need to
pre-load for the TABLE_LIST when opening an associated table.
During the prelocking phase, the variable 'trg_event_map'
will not be set for the view table. This value will be set
after the processing of triggers defined on the table. During
the processing of sub-statements, 'locked_tables_mode' will be
set to 'LTM_PRELOCKED' which denotes that further locking
of tables/functions cannot be done. This results in the other
table not being locked and thus further processing results in
an error getting reported.
FIX:
====
During the prelocking of view, the value of 'trg_event_map'
of the view is copied to 'trg_event_map' of the next table
in the TABLE_LIST. This results in the locking of tables
associated with the trigger as well.
This fix also fixes a connection hang when trying to do INSERT DELAYED to a crashed table.
Added crash_mysqld.inc to allow easy crash+restart of mysqld
Don't compare "field == table->next_number_field" because the field
can be special nullable field copy created by the trigger.
Compare field_index values instead.
NOT NULL constraint must be checked *after* the BEFORE triggers.
That is for INSERT and UPDATE statements even NOT NULL fields
must be able to store a NULL temporarily at least while
BEFORE INSERT/UPDATE triggers are running.
* move common code to a new set_bad_null_error() function
* move repeated comparison out of the loop
* remove unused code
* unused method Table_triggers_list::set_table
* redundant condition (if (table) after table was dereferenced)
* add an assert
On shutdown feedback was sending a short report without creating
a THD. At that point current_thd was pointing to the already
destroyed THD from the previous full report.
backport from 10.1:
commit bfe703a
Author: Sergei Golubchik <serg@mariadb.org>
Date: Tue Feb 3 18:19:56 2015 +0100
don't let current_thd to point to a destroyed THD
Problem & Analysis: If DML invokes a trigger or a
stored function that inserts into an AUTO_INCREMENT column,
that DML has to be marked as 'unsafe' statement. If the
tables are locked in the transaction prior to DML statement
(using LOCK TABLES), then the same statement is not marked as
'unsafe' statement. The logic of checking whether unsafeness
is protected with if (!thd->locked_tables_mode). Hence if
we lock the tables prior to DML statement, it is *not* entering
into this if condition. Hence the statement is not marked
as unsafe statement.
Fix: Irrespective of locked_tables_mode value, the unsafeness
check should be done. Now with this patch, the code is moved
out to 'decide_logging_format()' function where all these checks
are happening and also with out 'if(!thd->locked_tables_mode)'.
Along with the specified test case in the bug scenario
(BINLOG_STMT_UNSAFE_AUTOINC_COLUMNS), we also identified that
other cases BINLOG_STMT_UNSAFE_AUTOINC_NOT_FIRST,
BINLOG_STMT_UNSAFE_WRITE_AUTOINC_SELECT, BINLOG_STMT_UNSAFE_INSERT_TWO_KEYS
are also protected with thd->locked_tables_mode which is not right. All
of those checks also moved to 'decide_logging_format()' function.
HA_MYISAMMRG.CC:631
Analysis
========
Any attempt to open a temporary MyISAM merge table consisting
of a view in its list of tables (not the last table in the list)
under LOCK TABLES causes the server to exit.
Current implementation doesn't perform sanity checks during
merge table creation. This allows merge table to be created
with incompatible tables (table with non-myisam engine),
views or even with table doesn't exist in the system.
During view open, check to verify whether requested view
is part of a merge table is missing under LOCK TABLES path
in open_table(). This leads to opening of underlying table
with parent_l having NULL value. Later when attaching child
tables to parent, this hits an ASSERT as all child tables
should have parent_l pointing to merge parent. If the operation
does not happen under LOCK TABLES mode, open_table() checks
for view's parent_l and returns error.
Fix:
======
Check added before opening view Under LOCK TABLES in open_table()
to verify whether it is part of merge table. Error is returned
if the view is part of a merge table.
find_item_in_list() now recognize view fields like a fields even if they rever to an expression.
The problem of schema name do not taken into account for field with it and
derived table fixed.
Duplicating code removed
(MDEV-8617: Post-fix for 10.1)
* Reset THD's PS members before returning when node is
not ready
* Add CF_SKIP_WSREP_CHECK flag to COM_STMT_XXX commands
* Skip TO replication of COM_STMT_PREPAREs for MyISAM
* Updated tests
Problem: Not all permanent Item_direct_view_ref was in permanent list of used items of the view.
Solution: Detect creating permenent view/derived table reference and put them in the permanent list at once.
- Part 3: Adding mem_root to push_back() and push_front()
Other things:
- Added THD as an argument to some partition functions.
- Added memory overflow checking for XML tag's in read_xml()
- Added mem_root to all calls to new Item
- Added private method operator new(size_t size) to Item to ensure that
we always use a mem_root when creating an item.
This saves use once call to current_thd per Item creation
Added mandatory thd parameter to Item (and all derivative classes) constructor.
Added thd parameter to all routines that may create items.
Also removed "current_thd" from Item::Item. This reduced number of
pthread_getspecific() calls from 290 to 177 per OLTP RO transaction.
Alternative fix that doesn't cause view.test crash in --ps:
Remember when Item_ref was fixed right in the constructor
and did not have a full Item_ref::fix_fields() call. Later
in PS/SP, after Item_ref::cleanup, we use this knowledge
to avoid doing full fix_fields() for items that were never
supposed to be fix_field'ed.
Simplify the test case.
- Changed ER(ER_...) to ER_THD(thd, ER_...) when thd was known or if there was many calls to current_thd in the same function.
- Changed ER(ER_..) to ER_THD_OR_DEFAULT(current_thd, ER...) in some places where current_thd is not necessary defined.
- Removing calls to current_thd when we have access to thd
Part of this is optimization (not calling current_thd when not needed),
but part is bug fixing for error condition when current_thd is not defined
(For example on startup and end of mysqld)
Notable renames done as otherwise a lot of functions would have to be changed:
- In JOIN structure renamed:
examined_rows -> join_examined_rows
record_count -> join_record_count
- In Field, renamed new_field() to make_new_field()
Other things:
- Added DBUG_ASSERT(thd == tmp_thd) in Item_singlerow_subselect() just to be safe.
- Removed old 'tab' prefix in JOIN_TAB::save_explain_data() and use members directly
- Added 'thd' as argument to a few functions to avoid calling current_thd.
