main.mysqlbinlog_row_innodb are skipped by mtr
=== Problem ===
The following tests are wrongly placed in main suite and as a
result these are not run with proper binlog format combinations.
Some are always skipped by mtr.
1) mysqlbinlog_row_myisam
2) mysqlbinlog_row_innodb
3) mysqlbinlog_row.test
4) mysqlbinlog_row_trans.test
5) mysqlbinlog-cp932
6) mysqlbinlog2
7) mysqlbinlog_base64
=== Background ===
mtr runs the tests placed in main suite with binlog format=stmt.
Those that need to be tested against binlog format=row or mixed
or more than one binlog format and require only one mysql server
are placed in binlog suite. mtr runs tests in binlog suite with
all three binlog formats(stmt,row and mixed).
=== Fix ===
1) Moved the test listed in problem section above to binlog suite.
2) Added prefix "binlog_" to the name of each test case moved.
Renamed the coresponding result files and option files accordingly.
mysql-test/extra/binlog_tests/mysqlbinlog_row_engine.inc:
include file for mysqlbinlog_row_myisam.test and
mysqlbinlog_row_myisam.test which are being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog-cp932.result:
result file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog2.result:
result file for mysqlbinlog2.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_base64.result:
result file for mysqlbinlog_base64.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row.result:
result file for mysqlbinlog_row.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_innodb.result:
result file for mysqlbinlog_row_innodb.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_myisam.result:
result file for mysqlbinlog_row_myisam.test which is being moved to
binlog suite.
mysql-test/suite/binlog/r/binlog_mysqlbinlog_row_trans.result:
result file for mysqlbinlog_row_trans.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932-master.opt:
option file for mysqlbinlog-cp932.test which is being moved to
binlog suite.
mysql-test/suite/binlog/t/binlog_mysqlbinlog-cp932.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog2.test:
the test requires binlog format=stmt or mixed. Since, it was placed in
main suite earlier, it was only run with binlog format=stmt, and hence
this test was never run with binlog format=mixed.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_base64.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_innodb.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_myisam.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
mysql-test/suite/binlog/t/binlog_mysqlbinlog_row_trans.test:
the test requires binlog format=row. Since, it was placed in main
suite earlier, it was only run with binlog format=stmt, and hence
this test was always skipped by mtr.
PRIVILEGES
Description: (user,host) pair from security context is used
privilege checking at the time of granting or
revoking proxy privileges. This creates problem
when server is started with
--skip-name-resolve option because host will not
contain any value. Checks should be dependent on
consistent values regardless the way server is
started. Further, privilege check should use
(priv_user,priv_host) pair rather than values
obtained from inbound connection because
this pair represents the correct account context
obtained from mysql.user table.
-----------
After compiling from source, during make test I got the following error:
test main.loaddata failed with error
CURRENT_TEST: main.loaddata
mysqltest: At line 592: query 'LOAD DATA INFILE 'tmpp.txt' INTO TABLE t1
CHARACTER SET ucs2
(@b) SET a=REVERSE(@b)' failed: 1115: Unknown character set: 'ucs2'
I noticed other tests are skipped because of no ucs2
main.mix2_myisam_ucs2 [ skipped ] Test requires:'
have_ucs2'
Should main.loaddata be skipped if there is no ucs2
How To Repeat:
-------------
Run make test on compiled source that doesn't have ucs2
Suggested fix:
-------------
the failing piece of the test should be moved from mysql-test/t/loaddata.test to
mysql-test/t/ctype_ucs.test.
-----------
After compiling from source, during make test I got the following error:
test main.loaddata failed with error
CURRENT_TEST: main.loaddata
mysqltest: At line 592: query 'LOAD DATA INFILE 'tmpp.txt' INTO TABLE t1
CHARACTER SET ucs2
(@b) SET a=REVERSE(@b)' failed: 1115: Unknown character set: 'ucs2'
I noticed other tests are skipped because of no ucs2
main.mix2_myisam_ucs2 [ skipped ] Test requires:'
have_ucs2'
Should main.loaddata be skipped if there is no ucs2
How To Repeat:
-------------
Run make test on compiled source that doesn't have ucs2
Suggested fix:
-------------
the failing piece of the test should be moved from mysql-test/t/loaddata.test to
mysql-test/t/ctype_ucs.test.
CONNECTIONS IF SPE
Problem description: -ssl-key value is not validated, you can assign any bogus
text to --ssl-key and it is not verified that it exists, and more importantly,
it allows the client to connect to mysqld.
Fix: Added proper validations checks for --ssl-key.
Note:
1) Documentation changes require for 5.1, 5.5, 5.6 and trunk in the sections
listed below and the details are :
http://dev.mysql.com/doc/refman/5.6/en/ssl-options.html#option_general_ssl
and
REQUIRE SSL section of
http://dev.mysql.com/doc/refman/5.6/en/grant.html
2) Client having with option '--ssl', should able to get ssl connection. This
will be implemented as part of separate fix in 5.6 and trunk.
Problem description:
Table 't' created with two colums having compound index on both the
columns under innodb/myisam engine at remote machine. In the local
machine same table is created undet the federated engine.
A select having where clause with along 'AND' operation gives wrong
results on local machine.
Analysis:
The given query at federated engine is wrongly transformed by
federated::create_where_from_key() function and the same was sent to
the remote machine. Hence the local machine is showing wrong results.
Given query "select c1 from t where c1 <= 2 and c2 = 1;"
Query transformed, after ha_federated::create_where_from_key() function is:
SELECT `c1`, `c2` FROM `t` WHERE (`c1` IS NOT NULL ) AND
( (`c1` >= 2) AND (`c2` <= 1) ) and the same sent to real_query().
In the above the '<=' and '=' conditions were transformed to '>=' and
'<=' respectively.
ha_federated::create_where_from_key() function behaving as below:
The key_range is having both the start_key and end_key. The start_key
is used to get "(`c1` IS NOT NULL )" part of the where clause, this
transformation is correct. The end_key is used to get "( (`c1` >= 2)
AND (`c2` <= 1) )", which is wrong, here the given conditions('<=' and '=')
are changed as wrong conditions('>=' and '<=').
The end_key is having {key = 0x39fa6d0 "", length = 10, keypart_map = 3,
flag = HA_READ_AFTER_KEY}
The store_length is having value '5'. Based on store_length and length
values the condition values is applied in HA_READ_AFTER_KEY switch case.
The switch case 'HA_READ_AFTER_KEY' is applicable to only the last part of
the end_key and for previous parts it is going to 'HA_READ_KEY_OR_NEXT' case,
here the '>=' is getting added as a condition instead of '<='.
Fix:
Updated the 'if' condition in 'HA_READ_AFTER_KEY' case to affect for all
parts of the end_key. i.e 'i > 0' will used for end_key, Hence added it in
the if condition.
mysql-test/suite/federated/federated.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_archive.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_13118.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_25714.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_bug_35333.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_debug.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_innodb.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_server.test:
modified the federated.inc file location
mysql-test/suite/federated/federated_transactions.test:
modified the federated.inc file location
mysql-test/suite/federated/include/federated.inc:
moved the file from federated suite to federated/include folder
mysql-test/suite/federated/include/federated_cleanup.inc:
moved the file from federated suite to federated/include folder
mysql-test/suite/federated/include/have_federated_db.inc:
moved the file from federated suite to federated/include folder
storage/federated/ha_federated.cc:
updated the 'if condition' in ha_federated::create_where_from_key()
function.
1. Clear text password client plugin disabled by default.
2. Added an environment variable LIBMYSQL_ENABLE_CLEARTEXT_PLUGIN, that
when set to something starting with '1', 'Y' or 'y' will enable the clear
text
plugin for all connections.
3. Added a new mysql_options() option : MYSQL_ENABLE_CLEARTEXT_PLUGIN
that takes an my_bool argument. When the value of the argument is non-zero
the clear text plugin is enabled for this connection only.
4. Added an enable-cleartext-plugin config file option that takes a numeric
argument. If the numeric value of the numeric argument is non-zero the
clear
text plugin is enabled for the connection
5. Added a boolean command line option "--enable_cleartext_plugin" to
mysql, mysqlslap and mysqladmin. When specified it will call mysql_options
with the effect of #3
6. Added a new CLEARTEXT option to the connect command in mysqltest.
When specified it will enable the cleartext plugin for usage.
7. Added test cases and updated existing ones that need the clear text
plugin.
Print the warning(note):
YEAR(x) is deprecated and will be removed in a future release. Please use YEAR(4) instead
on "CREATE TABLE ... YEAR(x)" or "ALTER TABLE MODIFY ... YEAR(x)", where x != 4
Fixed by backport of:
------------------------------------------------------------
revno: 3402.50.156
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
branch nick: mysql-trunk-test
timestamp: Wed 2012-02-08 14:10:23 +0100
message:
Bug#13417754 ASSERT IN ROW_DROP_DATABASE_FOR_MYSQL DURING DROP SCHEMA
This assert could be triggered if an InnoDB table was being moved
to a different database using ALTER TABLE ... RENAME, while this
database concurrently was being dropped by DROP DATABASE.
The reason for the problem was that no metadata lock was taken
on the target database by ALTER TABLE ... RENAME.
DROP DATABASE was therefore not blocked and could remove
the database while ALTER TABLE ... RENAME was executing. This
could cause the assert in InnoDB to be triggered.
This patch fixes the problem by taking a IX metadata lock on
the target database before ALTER TABLE ... RENAME starts
moving a table to a different database.
Note that this problem did not occur with RENAME TABLE which
already takes the correct metadata locks.
Also note that this patch slightly changes the behavior of
ALTER TABLE ... RENAME. Before, the statement would abort and
return an error if a lock on the target table name could not
be taken immediately. With this patch, ALTER TABLE ... RENAME
will instead block and wait until the lock can be taken
(or until we get a lock timeout). This also means that it is
possible to get ER_LOCK_DEADLOCK errors in this situation
since we allow ALTER TABLE ... RENAME to wait and not just
abort immediately.
CAUSES RESTORE PROBLEM
Merging the fix from mysql-5.1 to mysql-5.5
mysql-test/t/mysqldump.test:
There is a difference in the testcase which is added as
part of this fix, when compared with mysql-5.1. In mysql-5.5
and mysql-5.6, "DROP mysql database" fails by enabling
logging, hence removed those lines.
CAUSES RESTORE PROBLEM
Problem Statement:
------------------
mysqldump is not having the dump stmts for general_log and slow_log
tables. That is because of the fix for Bug#26121. Hence, after
dropping the mysql database, and applying the dump by enabling the
logging, "'general_log' table not found" errors are logged into the
server log file.
Analysis:
---------
As part of the fix for Bug#26121, we skipped the dumping of tables
for general_log and slow_log, because the data dump of those tables
are taking LOCKS, which is not allowed for log tables.
Fix:
----
We came up with an approach that instead of taking both meta data
and data dump information for those tables, take only the meta data
dump which doesn't need LOCKS.
As part of fixing the issue we came up with below algorithm.
Design before fix:
1) mysql database is having tables like db, event,... general_log,
... slow_log...
2) Skip general_log and slow_log while preparing the tables list
3) Take the TL_READ lock on tables which are present in the table
list and do 'show create table'.
4) Release the lock.
Design with the fix:
1) mysql database is having tables like db, event,... general_log,
... slow_log...
2) Skip general_log and slow_log while preparing the tables list
3) Explicitly call the 'show create table' for general_log and
slow_log
3) Take the TL_READ lock on tables which are present in the table
list and do 'show create table'.
4) Release the lock.
While taking the meta data dump for general_log and slow_log the
"CREATE TABLE" is replaced with "CREATE TABLE IF NOT EXISTS".
This is because we skipped "DROP TABLE" for those tables,
"DROP TABLE" fails for these tables if logging is enabled.
Customer is applying the dump by enabling logging so, if the dump
has "DROP TABLE" it will fail. Hence, removed the "DROP TABLE"
stmts for those tables.
After the fix we could observe "Table 'mysql.general_log'
doesn't exist" errors initially that is because in the customer
scenario they are dropping the mysql database by enabling the
logging, Hence, those errors are expected. Once we apply the
dump which is taken before the "drop database mysql", the errors
will not be there.
client/mysqldump.c:
In get_table_structure() added code to skip the DROP TABLE stmts for general_log
and slow_log tables, because when logging is enabled those stmts will fail. And
replaced CREATE TABLE with CREATE IF NOT EXISTS for those tables, just to make
sure CREATE stmt for those tables doesn't fail since we removed DROP stmts for
those tables.
In dump_all_tables_in_db() added code to call get_table_structure() for
general_log and slow_log tables.
mysql-test/r/mysqldump.result:
Added a test as part of fix for Bug #11754178
mysql-test/t/mysqldump.test:
Added a test as part of fix for Bug #11754178
CAUSES RESTORE PROBLEM
Problem Statement:
------------------
mysqldump is not having the dump stmts for general_log and slow_log
tables. That is because of the fix for Bug#26121. Hence, after
dropping the mysql database, and applying the dump by enabling the
logging, "'general_log' table not found" errors are logged into the
server log file.
Analysis:
---------
As part of the fix for Bug#26121, we skipped the dumping of tables
for general_log and slow_log, because the data dump of those tables
are taking LOCKS, which is not allowed for log tables.
Fix:
----
We came up with an approach that instead of taking both meta data
and data dump information for those tables, take only the meta data
dump which doesn't need LOCKS.
As part of fixing the issue we came up with below algorithm.
Design before fix:
1) mysql database is having tables like db, event,... general_log,
... slow_log...
2) Skip general_log and slow_log while preparing the tables list
3) Take the TL_READ lock on tables which are present in the table
list and do 'show create table'.
4) Release the lock.
Design with the fix:
1) mysql database is having tables like db, event,... general_log,
... slow_log...
2) Skip general_log and slow_log while preparing the tables list
3) Explicitly call the 'show create table' for general_log and
slow_log
3) Take the TL_READ lock on tables which are present in the table
list and do 'show create table'.
4) Release the lock.
While taking the meta data dump for general_log and slow_log the
"CREATE TABLE" is replaced with "CREATE TABLE IF NOT EXISTS".
This is because we skipped "DROP TABLE" for those tables,
"DROP TABLE" fails for these tables if logging is enabled.
Customer is applying the dump by enabling logging so, if the dump
has "DROP TABLE" it will fail. Hence, removed the "DROP TABLE"
stmts for those tables.
After the fix we could observe "Table 'mysql.general_log'
doesn't exist" errors initially that is because in the customer
scenario they are dropping the mysql database by enabling the
logging, Hence, those errors are expected. Once we apply the
dump which is taken before the "drop database mysql", the errors
will not be there.
client/mysqldump.c:
In get_table_structure() added code to skip the DROP TABLE stmts for general_log
and slow_log tables, because when logging is enabled those stmts will fail. And
replaced CREATE TABLE with CREATE IF NOT EXISTS for those tables, just to make
sure CREATE stmt for those tables doesn't fail since we removed DROP stmts for
those tables.
In dump_all_tables_in_db() added code to call get_table_structure() for
general_log and slow_log tables.
mysql-test/r/mysqldump.result:
Added a test as part of fix for Bug #11754178
mysql-test/t/mysqldump.test:
Added a test as part of fix for Bug #11754178
Details:
- test case bug12427262.test was failing on windows because
on windows '/' was not recognized. And this was used in
LIKE clause of the query being run in this test case.
Fix:
- Windows needs '\\\\' for path seperater in mysql. I was
not sure how to keep a single query with two different
syntax based on platform. So modifying query to make sure
it runs correctly on both platform.
mysql-test/r/select.result:
Added test result for Bug#12713907
mysql-test/t/select.test:
Added test case for Bug#12713907
sql/sql_select.cc:
Remove the call to set_keyread as we do it from access
functions 'join_read_first' and 'join_read_last'
ORDER BY COUNT(*) LIMIT.
PROBLEM:
With respect to problem in the bug description, we
exhibit different behaviors for the two tables
presented, because innodb statistics (rec_per_key
in this case) are updated for the first table
and not so for the second one. As a result the
query plan gets changed in test_if_skip_sort_order
to use 'index' scan. Hence the difference in the
explain output. (NOTE: We can reproduce the problem
with first table by reducing the number of tuples
and changing the table structure)
The varied output w.r.t the query on the second table
is because of the result in the query plan change.
When a query plan is changed to use 'index' scan,
after the call to test_if_skip_sort_order, we set
keyread to TRUE immedietly. If for some reason
we drop this index scan for a filesort later on,
we fetch only the keys not the entire tuple.
As a result we would see junk values in the result set.
Following is the code flow:
Call test_if_skip_sort_order
-Choose an index to give sorted output
-If this is a covering index, set_keyread to TRUE
-Set the scan to INDEX scan
Call test_if_skip_sort_order second time
-Index is not chosen (note that we do not pass the
actual limit value second time. Hence we do not choose
index scan second time which in itself is a bug fixed
in 5.6 with WL#5558)
-goto filesort
Call filesort
-Create quick range on a different index
-Since keyread is set to TRUE, we fetch only the columns of
the index
-results in the required columns are not fetched
FIX:
Remove the call to set_keyread(TRUE) from
test_if_skip_sort_order. The access function which is
'join_read_first' or 'join_read_last' calls set_keyread anyways.
mysql-test/r/func_group_innodb.result:
Added test result for Bug#12713907
mysql-test/t/func_group_innodb.test:
Added test case for Bug#12713907
sql/sql_select.cc:
Remove the call to set_keyread as we do it from access
functions 'join_read_first' and 'join_read_last'
TABLES IN INCORRECT ENGINE
PROBLEM:
CREATE/ALTER TABLE currently can move system tables like
mysql.db, user, host etc, to engines other than MyISAM. This is not
completely supported as of now, by mysqld. When some of system tables
like plugin, servers, event, func, *_priv, time_zone* are moved
to innodb, mysqld restart crashes. Currently system tables
can be moved to BLACKHOLE also!!!.
ANALYSIS:
The problem is that there is no check before creating or moving
a system table to some particular engine.
System tables are suppose to be residing in MyISAM. We can think
of restricting system tables to exist only in MyISAM. But, there could
be future needs of these system tables to be part of other engines
by design. For eg, NDB cluster expects some tables to be on innodb
or ndb engine. This calls for a solution, by which system
tables can be supported by any desired engine, with minimal effort.
FIX:
The solution provides a handlerton interface using which,
mysqld server can query particular storage engine handlerton for
system tables that it supports. This way each storage engine
layer can define their own system database and system tables.
The check_engine() function uses the new handlerton function
ha_check_if_supported_system_table() to check if db.tablename
provided in the DDL is supported by the SE.
Note: This fix has modified a test in help.test, which was moving
mysql.help_* to innodb. The primary intention of the test was not
to move them between engines.
This bug is a duplicate of Bug #31173, which was pushed to the
mysql-trunk 5.6 on 4th Aug, 2010. This is just a back-port of
the fix
mysql-test/r/mysqlslap.result:
A test added as part of the fix for Bug #59107
mysql-test/t/mysqlslap.test:
A test added as part of the fix for Bug #59107
This bug is a duplicate of Bug #31173, which was pushed to the
mysql-trunk 5.6 on 4th Aug, 2010. This is just a back-port of
the fix
mysql-test/r/mysqlslap.result:
A test added as part of the fix for Bug #59107
mysql-test/t/mysqlslap.test:
A test added as part of the fix for Bug #59107
Bug#13639204 64111: CRASH ON SELECT SUBQUERY WITH NON UNIQUE INDEX
The crash happened due to wrong calculation
of key length during creation of reference for
sort order index. The problem is that
keyuse->used_tables can have OUTER_REF_TABLE_BIT enabled
but used_tables parameter(create_ref_for_key() func) does
not have it. So key parts which have OUTER_REF_TABLE_BIT
are ommited and it could lead to incorrect key length
calculation(zero key length).
mysql-test/r/subselect_innodb.result:
test result
mysql-test/t/subselect_innodb.test:
test case
sql/sql_select.cc:
added OUTER_REF_TABLE_BIT to the used_tables parameter
for create_ref_for_key() function.
storage/innobase/handler/ha_innodb.cc:
added assertion, request from Inno team
storage/innodb_plugin/handler/ha_innodb.cc:
added assertion, request from Inno team
Background:
- as described in MySQL Internals Prepared Stored
(http://forge.mysql.com/wiki/MySQL_Internals_Prepared_Stored),
the Optimizer sometimes does destructive changes to the parsed
LEX-object (Item-tree), which makes it impossible to re-use
that tree for PS/SP re-execution.
- in order to be able to re-use the Item-tree, the destructive
changes are remembered and rolled back after the statement execution.
The problem, discovered by this bug, was that the objects representing
GROUP-BY clause did not restored after query execution. So, the GROUP-BY
part of the statement could not be properly re-initialized for re-execution
after destructive changes.
Those objects do not take part in the Item-tree, so they can not be saved
using the approach for Item-tree.
The fix is as follows:
- introduce a new array in st_select_lex to store the original
ORDER pointers, representing the GROUP-BY clause;
- Initialize this array in fix_prepare_information().
- restore the list of GROUP-BY items in reinit_stmt_before_use().
HANG IN PREPARING WITH 100% CPU USAGE
Infinite loop in the subselect_indexsubquery_engine::exec()
function caused Server hang with 100% CPU usage.
The BLACKHOLE storage engine didn't update handler's
table->status variable after index operations, that
caused an infinite "while(!table->status)" execution.
Index access methods of the BLACKHOLE engine handler
have been updated to set table->status variable to
STATUS_NOT_FOUND or 0 when such a method returns a
HA_ERR_END_OF_FILE error or 0 respectively.
mysql-test/r/blackhole.result:
Bug #11880012: INDEX_SUBQUERY, BLACKHOLE,
HANG IN PREPARING WITH 100% CPU USAGE
New test file for the BLACKHOLE engine.
mysql-test/t/blackhole.test:
Bug #11880012: INDEX_SUBQUERY, BLACKHOLE,
HANG IN PREPARING WITH 100% CPU USAGE
New test file for the BLACKHOLE engine.
storage/blackhole/ha_blackhole.cc:
Bug #11880012: INDEX_SUBQUERY, BLACKHOLE,
HANG IN PREPARING WITH 100% CPU USAGE
Index access methods of the BLACKHOLE engine handler
have been updated to set table->status variable to
STATUS_NOT_FOUND or 0 when such a method returns a
HA_ERR_END_OF_FILE error or 0 respectively, like
we do in MyISAM storage engine.
Analysis:
-------------------------------
According to the Manual
(http://dev.mysql.com/doc/refman/5.1/en/identifier-case-sensitivity.html):
"Column, index, stored routine, and event names are not case sensitive on any
platform, nor are column aliases."
In other words, 'lower_case_table_names' does not affect the behaviour of
those identifiers.
On the other hand, trigger names are case sensitive on some platforms,
and case insensitive on others. 'lower_case_table_names' does not affect
the behaviour of trigger names either.
The bug was that SHOW statements did case sensitive comparison
for stored procedure / stored function / event names.
Fix:
Modified the code so that comparison in case insensitive for routines
and events for "SHOW" operation.
As part of this commit, only fixing the test failures due to the actual code fix.
Analysis:
-------------------------------
According to the Manual
(http://dev.mysql.com/doc/refman/5.1/en/identifier-case-sensitivity.html):
"Column, index, stored routine, and event names are not case sensitive on any
platform, nor are column aliases."
In other words, 'lower_case_table_names' does not affect the behaviour of
those identifiers.
On the other hand, trigger names are case sensitive on some platforms,
and case insensitive on others. 'lower_case_table_names' does not affect
the behaviour of trigger names either.
The bug was that SHOW statements did case sensitive comparison
for stored procedure / stored function / event names.
Fix:
Modified the code so that comparison in case insensitive for routines
and events for "SHOW" operation.
Problem:
Field_set::val_str in case of an empty SET value
returned a String with str_length==0 and Ptr==0,
which is not expected by some pieces of the code.
Fix:
Returning an empty string with str_length==0 and Ptr=="",
like Field_enum does.
