strict aliasing violations.
Essentially, the problem is that large parts of the server were
developed in simpler times (last decades, pre C99 standard) when
strict aliasing and compilers supporting such optimizations were
rare to non-existent. Thus, when compiling the server with a modern
compiler that uses strict aliasing rules to perform optimizations,
there are several places in the code that might trigger undefined
behavior.
As evinced by some recent bugs, GCC does a somewhat good of job
misoptimizing such code, but on the other hand also gives warnings
about suspicious code. One problem is that the warnings aren't
always accurate, yet we can't afford to just shut them off as we
might miss real cases. False-positive cases are aggravated mostly
by casts that are likely to trigger undefined behavior.
The solution is to start a cleanup process focused on fixing and
reducing the amount of strict-aliasing related warnings produced
by GCC and others compilers. A good deal of noise reduction can
be achieved by just removing useless casts that are product of
historical cruft and are likely to trigger undefined behavior if
dereferenced.
Conflicts:
Text conflict in mysql-test/r/archive.result
Contents conflict in mysql-test/r/innodb_bug38231.result
Text conflict in mysql-test/r/mdl_sync.result
Text conflict in mysql-test/suite/binlog/t/disabled.def
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result
Text conflict in mysql-test/t/archive.test
Contents conflict in mysql-test/t/innodb_bug38231.test
Text conflict in mysql-test/t/mdl_sync.test
Text conflict in sql/sp_head.cc
Text conflict in sql/sql_show.cc
Text conflict in sql/table.cc
Text conflict in sql/table.h
bitmap_is_set(table->read_set, field_index))
UPDATE on an InnoDB table modifying the same index that is used
to satisfy the WHERE condition could trigger a debug assertion
under some circumstances.
Since for engines with the HA_PRIMARY_KEY_IN_READ_INDEX flag
set results of an index scan on a secondary index are appended
by the primary key value, if a query involves only columns from
the primary key and a secondary index, the latter is considered
to be covering.
That tricks mysql_update() to mark for reading only columns
from the secondary index when it does an index scan to retrieve
rows to update in case a part of that key is also being
updated. However, there may be other columns in WHERE that are
part of the primary key, but not the secondary one.
What we actually want to do in this case is to add index
columns to the existing WHERE columns bitmap rather than
replace it.
transactional SELECT and ALTER TABLE ... REBUILD PARTITION".
The goal of this patch is to decouple type of metadata
lock acquired for table by open_tables() from type of
table-level lock to be acquired on it.
To achieve this we change approach to how we determine what
type of metadata lock should be acquired on table to be open.
Now instead of inferring it at open_tables() time from flags
and type of table-level lock we rely on that type of metadata
lock is properly set at parsing time and is not changed
further.
data directory name command
The check_db_name function has been modified to validate tails of
#mysql50#-prefixed database names for compliance with MySQL 5.0
database name encoding rules (the check_table_name function call
has been reused).
Conflicts:
Text conflict in mysql-test/r/grant.result
Text conflict in mysql-test/t/grant.test
Text conflict in mysys/mf_loadpath.c
Text conflict in sql/slave.cc
Text conflict in sql/sql_priv.h
MYSQL_BIN_LOG m_table_map_version member and it's associated
functions were not used in the logic of binlogging and replication,
this patch removed all related code.
This is the 5.1 merge and extension of the fix.
The server was happily accepting paths in table name in all places a table
name is accepted (e.g. a SELECT). This allowed all users that have some
privilege over some database to read all tables in all databases in all
mysql server instances that the server file system has access to.
Fixed by :
1. making sure no path elements are allowed in quoted table name when
constructing the path (note that the path symbols are still valid in table names
when they're properly escaped by the server).
2. checking the #mysql50# prefixed names the same way they're checked for
path elements in mysql-5.0.
Adding my_global.h first in all files using
NO_EMBEDDED_ACCESS_CHECKS.
Correcting a merge problem resulting from a changed definition
of check_some_access compared to the original patches.
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
into partitioned MyISAM table
Problem was that the ha_data structure was introduced in 5.1
and only used for partitioning first, but with the intention
of be of use for others engines as well, and when used by other
engines it would clash if it also was partitioned.
Solution is to move the partitioning specific data to a separate
structure, with its own mutex (which is used for auto_increment).
Also did rename PARTITION_INFO to PARTITION_STATS since there
already exist a class named partition_info, also cleaned up
some related variables.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Conflicts:
Text conflict in mysql-test/r/partition_innodb.result
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/item_sum.h
Text conflict in sql/log_event_old.cc
Text conflict in sql/protocol.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_yacc.yy
The problem is that Item_direct_view_ref which is inherited
from Item_ident updates orig_table_name and table_name with
the same values. The fix is introduction of new constructor
into Item_ident and up which updates orig_table_name and
table_name separately.
The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_slow_query_log.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Conflict adding files to server-tools. Created directory.
Conflict because server-tools is not versioned, but has versioned children. Versioned directory.
Conflict adding files to server-tools/instance-manager. Created directory.
Conflict because server-tools/instance-manager is not versioned, but has versioned children. Versioned directory.
Contents conflict in server-tools/instance-manager/options.cc
Text conflict in sql/mysqld.cc
Add a wait-for graph based deadlock detector to the
MDL subsystem.
Fixes bug #46272 "MySQL 5.4.4, new MDL: unnecessary deadlock" and
bug #37346 "innodb does not detect deadlock between update and
alter table".
The first bug manifested itself as an unwarranted abort of a
transaction with ER_LOCK_DEADLOCK error by a concurrent ALTER
statement, when this transaction tried to repeat use of a
table, which it has already used in a similar fashion before
ALTER started.
The second bug showed up as a deadlock between table-level
locks and InnoDB row locks, which was "detected" only after
innodb_lock_wait_timeout timeout.
A transaction would start using the table and modify a few
rows.
Then ALTER TABLE would come in, and start copying rows
into a temporary table. Eventually it would stumble on
the modified records and get blocked on a row lock.
The first transaction would try to do more updates, and get
blocked on thr_lock.c lock.
This situation of circular wait would only get resolved
by a timeout.
Both these bugs stemmed from inadequate solutions to the
problem of deadlocks occurring between different
locking subsystems.
In the first case we tried to avoid deadlocks between metadata
locking and table-level locking subsystems, when upgrading shared
metadata lock to exclusive one.
Transactions holding the shared lock on the table and waiting for
some table-level lock used to be aborted too aggressively.
We also allowed ALTER TABLE to start in presence of transactions
that modify the subject table. ALTER TABLE acquires
TL_WRITE_ALLOW_READ lock at start, and that block all writes
against the table (naturally, we don't want any writes to be lost
when switching the old and the new table). TL_WRITE_ALLOW_READ
lock, in turn, would block the started transaction on thr_lock.c
lock, should they do more updates. This, again, lead to the need
to abort such transactions.
The second bug occurred simply because we didn't have any
mechanism to detect deadlocks between the table-level locks
in thr_lock.c and row-level locks in InnoDB, other than
innodb_lock_wait_timeout.
This patch solves both these problems by moving lock conflicts
which are causing these deadlocks into the metadata locking
subsystem, thus making it possible to avoid or detect such
deadlocks inside MDL.
To do this we introduce new type-of-operation-aware metadata
locks, which allow MDL subsystem to know not only the fact that
transaction has used or is going to use some object but also what
kind of operation it has carried out or going to carry out on the
object.
This, along with the addition of a special kind of upgradable
metadata lock, allows ALTER TABLE to wait until all
transactions which has updated the table to go away.
This solves the second issue.
Another special type of upgradable metadata lock is acquired
by LOCK TABLE WRITE. This second lock type allows to solve the
first issue, since abortion of table-level locks in event of
DDL under LOCK TABLES becomes also unnecessary.
Below follows the list of incompatible changes introduced by
this patch:
- From now on, ALTER TABLE and CREATE/DROP TRIGGER SQL (i.e. those
statements that acquire TL_WRITE_ALLOW_READ lock)
wait for all transactions which has *updated* the table to
complete.
- From now on, LOCK TABLES ... WRITE, REPAIR/OPTIMIZE TABLE
(i.e. all statements which acquire TL_WRITE table-level lock) wait
for all transaction which *updated or read* from the table
to complete.
As a consequence, innodb_table_locks=0 option no longer applies
to LOCK TABLES ... WRITE.
- DROP DATABASE, DROP TABLE, RENAME TABLE no longer abort
statements or transactions which use tables being dropped or
renamed, and instead wait for these transactions to complete.
- Since LOCK TABLES WRITE now takes a special metadata lock,
not compatible with with reads or writes against the subject table
and transaction-wide, thr_lock.c deadlock avoidance algorithm
that used to ensure absence of deadlocks between LOCK TABLES
WRITE and other statements is no longer sufficient, even for
MyISAM. The wait-for graph based deadlock detector of MDL
subsystem may sometimes be necessary and is involved. This may
lead to ER_LOCK_DEADLOCK error produced for multi-statement
transactions even if these only use MyISAM:
session 1: session 2:
begin;
update t1 ... lock table t2 write, t1 write;
-- gets a lock on t2, blocks on t1
update t2 ...
(ER_LOCK_DEADLOCK)
- Finally, support of LOW_PRIORITY option for LOCK TABLES ... WRITE
was abandoned.
LOCK TABLE ... LOW_PRIORITY WRITE from now on has the same
priority as the usual LOCK TABLE ... WRITE.
SELECT HIGH PRIORITY no longer trumps LOCK TABLE ... WRITE in
the wait queue.
- We do not take upgradable metadata locks on implicitly
locked tables. So if one has, say, a view v1 that uses
table t1, and issues:
LOCK TABLE v1 WRITE;
FLUSH TABLE t1; -- (or just 'FLUSH TABLES'),
an error is produced.
In order to be able to perform DDL on a table under LOCK TABLES,
the table must be locked explicitly in the LOCK TABLES list.
Queries optimized with GROUP_MIN_MAX didn't cleanup KEYREAD
optimization properly. As a result subsequent queries may
return incomplete rows (fields are initialized to default
values).
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
------------------------------------------------------------
revno: 2617.68.25
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-next-bg-pre2-2
timestamp: Wed 2009-09-16 18:26:50 +0400
message:
Follow-up for one of pre-requisite patches for fixing bug #30977
"Concurrent statement using stored function and DROP FUNCTION
breaks SBR".
Made enum_mdl_namespace enum part of MDL_key class and removed MDL_
prefix from the names of enum members. In order to do the latter
changed name of PROCEDURE symbol to PROCEDURE_SYM (otherwise macro
which was automatically generated for this symbol conflicted with
MDL_key::PROCEDURE enum member).
A pre-requisite patch for Bug#30977 "Concurrent statement using
stored function and DROP FUNCTION breaks SBR".
This patch changes the MDL API by introducing a namespace for
lock keys: MDL_TABLE for tables and views and MDL_PROCEDURE
for stored procedures and functions. The latter is needed for
the fix for Bug#30977.
----------------------------------------------------------
revno: 2617.69.20
committer: Konstantin Osipov <kostja@sun.com>
branch nick: 5.4-4284-1-assert
timestamp: Thu 2009-08-13 18:29:55 +0400
message:
WL#4284 "Transactional DDL locking"
A review fix.
Since WL#4284 implementation separated MDL_request and MDL_ticket,
MDL_request becamse a utility object necessary only to get a ticket.
Store it by-value in TABLE_LIST with the intent to merge
MDL_request::key with table_list->table_name and table_list->db
in future.
Change the MDL subsystem to not require MDL_requests to
stay around till close_thread_tables().
Remove the list of requests from the MDL context.
Requests for shared metadata locks acquired in open_tables()
are only used as a list in recover_from_failed_open_table_attempt(),
which calls mdl_context.wait_for_locks() for this list.
To keep such list for recover_from_failed_open_table_attempt(),
introduce a context class (Open_table_context), that collects
all requests.
A lot of minor cleanups and simplications that became possible
with this change.
----------------------------------------------------------
revno: 2617.23.20
committer: Konstantin Osipov <kostja@sun.com>
branch nick: mysql-6.0-runtime
timestamp: Wed 2009-03-04 16:31:31 +0300
message:
WL#4284 "Transactional DDL locking"
Review comments: "Objectify" the MDL API.
MDL_request and MDL_context still need manual construction and
destruction, since they are used in environment that is averse
to constructors/destructors.
------------------------------------------------------------
revno: 2617.23.18
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Mon 2009-03-02 18:18:26 -0300
message:
Bug#989: If DROP TABLE while there's an active transaction, wrong binlog order
WL#4284: Transactional DDL locking
This is a prerequisite patch:
These changes are intended to split lock requests from granted
locks and to allow the memory and lifetime of granted locks to
be managed within the MDL subsystem. Furthermore, tickets can
now be shared and therefore are used to satisfy multiple lock
requests, but only shared locks can be recursive.
The problem is that the MDL subsystem morphs lock requests into
granted locks locks but does not manage the memory and lifetime
of lock requests, and hence, does not manage the memory of
granted locks either. This can be problematic because it puts the
burden of tracking references on the users of the subsystem and
it can't be easily done in transactional contexts where the locks
have to be kept around for the duration of a transaction.
Another issue is that recursive locks (when the context trying to
acquire a lock already holds a lock on the same object) requires
that each time the lock is granted, a unique lock request/granted
lock structure structure must be kept around until the lock is
released. This can lead to memory leaks in transactional contexts
as locks taken during the transaction should only be released at
the end of the transaction. This also leads to unnecessary wake
ups (broadcasts) in the MDL subsystem if the context still holds
a equivalent of the lock being released.
These issues are exacerbated due to the fact that WL#4284 low-level
design says that the implementation should "2) Store metadata locks
in transaction memory root, rather than statement memory root" but
this is not possible because a memory root, as implemented in mysys,
requires all objects allocated from it to be freed all at once.
This patch combines review input and significant code contributions
from Konstantin Osipov (kostja) and Dmitri Lenev (dlenev).
----------------------------------------------------------
revno: 2630.4.38
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-4144
timestamp: Wed 2008-06-25 22:07:06 +0400
message:
WL#4144 - Lock MERGE engine children.
Committing a version of the patch merged with WL#3726
on behalf of Ingo.
Step #1: Move locking from parent to children.
MERGE children are now left in the query list of tables
after inserted there in open_tables(). So they are locked
by lock_tables() as all other tables are.
The MERGE parent does not store locks any more. It appears
in a MYSQL_LOCK with zero lock data. This is kind of a "dummy"
lock.
All other lock handling is also done directly on the children.
To protect against parent or child modifications during LOCK
TABLES, the children are detached after every statement and
attached before every statement, even under LOCK TABLES.
The children table list is removed from the query list of tables
on every detach and on close of the parent.
Step #2: Move MERGE specific functionality from SQL layer
into table handler.
Functionality moved from SQL layer (mainly sql_base.cc)
to the table handler (ha_myisammrg.cc).
Unnecessary code is removed from the SQL layer.
Step #3: Moved all MERGE specific members from TABLE
to ha_myisammrg.
Moved members from TABLE to ha_myisammrg.
Renamed some mebers.
Fixed comments.
Step #4: Valgrind and coverage testing
Valgrind did not uncover new problems.
Added purecov comments.
Added a new test for DATA/INDEX DIRECTORY options.
Changed handling of ::reset() for non-attached children.
Fixed the merge-big test.
Step #5: Fixed crashes detected during review
Changed detection when to attach/detach.
Added new tests.
Backport also the fix for Bug#44040 "MySQL allows creating a
MERGE table upon VIEWs but crashes when using it"
------------------------------------------------------------
revno: 2630.4.17
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-6.0-3726-w2
timestamp: Thu 2008-05-29 16:52:56 +0400
message:
WL#3726 "DDL locking for all metadata objects".
After review fixes in progress.
"The great correction of names".
Renamed MDL_LOCK and MDL_LOCK_DATA classes to make usage of
these names in metadata locking subsystem consistent with
other parts of server (i.e. thr_lock.cc). Now we MDL_LOCK_DATA
corresponds to request for a lock and MDL_LOCK to the lock
itself. Adjusted code in MDL subsystem and other places
using these classes accordingly.
Did similar thing for GLOBAL_MDL_LOCK_DATA class and also
changed name of its members to correspond to names of
MDL_LOCK_DATA members.
Finally got rid of usage of one letter variables in MDL
code since it makes code harder to search in (according
to reviewer).
