to wrong result
When using MIXED mode and issuing 'CREATE TEMPORARY TABLE t_tmp',
the statement is logged if the current binlogging mode is
STATEMENT. This causes the slave to replay the instruction and
create the temporary table as well. If there is no switch to ROW
mode, and later on a 'DROP TEMPORARY TABLE t_tmp' is issued, then
this statement will also be logged and the slave will
remove/close the temporary table.
However, if there is a switch to ROW mode between the CREATE and
DROP TEMPORARY table, the DROP statement will not be logged,
leaving the slave with a dangling temporary table.
This patch addresses this, by always logging a DROP TEMPORARY
TABLE IF EXISTS when in mixed mode and a drop statement is issued
for temporary table(s).
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
There is an inconsistency with DROP DATABASE|TABLE|EVENT IF EXISTS and
CREATE DATABASE|TABLE|EVENT IF NOT EXISTS. DROP IF EXISTS statements are
binlogged even if either the DB, TABLE or EVENT does not exist. In
contrast, Only the CREATE EVENT IF NOT EXISTS is binlogged when the EVENT
exists.
This patch fixes the following cases for all the replication formats:
CREATE DATABASE IF NOT EXISTS.
CREATE TABLE IF NOT EXISTS,
CREATE TABLE IF NOT EXISTS ... LIKE,
CREAET TABLE IF NOT EXISTS ... SELECT.
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
or database name in logs
Problem was that InnoDB used filenam_to_tablename,
which do not handle partitions (due to the '#' in
the filename).
Solution is to add a new function for explaining
what the filename means: explain_filename.
It expands the database, table, partition and subpartition
parts and uses errmsg.txt for localization.
It also converts from my_charset_filename to system_charset_info
(i.e. human readable form for non ascii characters).
http://lists.mysql.com/commits/70370
2773 Mattias Jonsson 2009-03-25
It has three different output styles.
NOTE: This is the server side ONLY part (introducing the explain_filename
function). There will be a patch for InnoDB using this function to solve
the bug.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
When doing ALTER TABLE, we forgot to point out that we actually have
ROW_FORMAT information (from the original table), so we dropped to
"sensible defaults". This affects both ALTER TABLE and OPTIMIZE TABLE
which may fall back on ALTER TABLE for InnoDB.
We now flag that we do indeed know the row-type, thereby preserving
compression-type etc.
No .test in 5.1 since we'd need a reasonable new plugin from InnoDB to
show this properly; in higher versions, maria can demonstrate this.
Problem: executing queries like "ALTER TABLE view1;" we don't
check new view's name (which is not specified),
that leads to server crash.
Fix: do nothing (to be consistent with the behaviour for tables)
in such cases.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
Backport from 6.0
Changed error message to show that it is partitioning
that does not support foreign keys yet.
Changed spelling from British english to American english.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
code backported from 6.0
per-file messages:
include/my_global.h
Remove SC_MAXWIDTH. This is unused and irrelevant nowadays.
include/my_sys.h
Remove errbuf declaration and unused definitions.
mysys/my_error.c
Remove errbuf definition and move and adjust ERRMSGSIZE.
mysys/my_init.c
Declare buffer on the stack and use my_snprintf.
mysys/safemalloc.c
Use size explicitly. It's more than enough for the message at hand.
sql/sql_error.cc
Use size explicitly. It's more than enough for the message at hand.
sql/sql_parse.cc
Declare buffer on the stack. Use my_snprintf as it will result in
less stack space being used than by a system provided sprintf --
this allows us to put the buffer on the stack without causing much
trouble. Also, the use of errbuff here was not thread-safe as the
function can be entered concurrently from multiple threads.
sql/sql_table.cc
Use MYSQL_ERRMSG_SIZE. Extra space is not needed as my_snprintf will
nul terminate strings.
storage/myisam/ha_myisam.cc
Use MYSQL_ERRMSG_SIZE.
sql/share/errmsg.txt
Error message truncation in test "innodb" in embedded mode
filename in the error message can safely take up to 210 symbols.
When using CREATE TEMPORARY TABLE LIKE to create a temporary table,
or using TRUNCATE to delete all rows of a temporary table, they
did not set the tmp_table_used flag, and cause the omission of
"SET @@session.pseudo_thread_id" when dumping binlog with mysqlbinlog,
and cause error when replay the statements.
This patch fixed the problem by setting tmp_table_used in these two
cases. (Done by He Zhenxing 2009-01-12)
bug#33094: Error in upgrading from 5.0 to 5.1 when table contains
triggers
and
#41385: Crash when attempting to repair a #mysql50# upgraded table
with triggers.
Problem:
1. trigger code didn't assume a table name may have
a "#mysql50#" prefix, that may lead to a failing ASSERT().
2. "ALTER DATABASE ... UPGRADE DATA DIRECTORY NAME" failed
for databases with "#mysql50#" prefix if any trigger.
3. mysqlcheck --fix-table-name didn't use UTF8 as a default
character set that resulted in (parsing) errors for tables with
non-latin symbols in their names and definitions of triggers.
Fix:
1. properly handle table/database names with "#mysql50#" prefix.
2. handle --default-character-set mysqlcheck option;
if mysqlcheck is launched with --fix-table-name or --fix-db-name
set default character set to UTF8 if no --default-character-set
option given.
Note: if given --fix-table-name or --fix-db-name option,
without --default-character-set mysqlcheck option
default character set is UTF8.
On Winodws FN_DEVCHAR is ':' symbol.
There is a check in mysql_create_table_no_lock() func
on FN_DEVCHAR presence but this code is obsolete and
unnecessary. So the fix is to remove unnecessary code.
(server crash)
Altering a table with fulltext index[es] which use
pluggable fulltext parser may cause server crash
in debug builds.
The problem was that ALTER TABLE code wrongly assigned
fulltext parser name.
Also fixed that altering a table with fulltext index[es]
leave stale fulltext parser locks, which prevent
fulltext parsers from being uninstalled after
ALTER TABLE.
