post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
post push fix:
rpl_stm_until.test was disabled because of
this bug. Enabled and fixed it.
Removed a part of the test that was obsolete.
It tested replication from 4.0 master to 5.0
slave.
=== Problem ===
The test is dependent on binlog positions and checks
to see if the command 'START SLAVE' functions correctly
with the 'UNTIL' clause added to it. The 'UNTIL' clause
is added to specify that the slave should start and run
until the SQL thread reaches a given point in the master
binary log or in the slave relay log.
The test uses hard coded values for MASTER_LOG_POS and
RELAY_LOG_POS, instead of extracting it using
query_get_value() function. There is a test
'rpl.rpl_row_until' which does the similar thing but uses
query_get_value() function to set the values of
MASTER_LOG_POS/ RELAY_LOG_POS. To be precise,
rpl.rpl_row_until is a modified version of
engines/func.rpl_row_until.test.
The use of hard coded values may lead the slave to stop at a position
which may differ from the expected position in the binlog file,
an example being the failure of engines/funcs.rpl_row_until in
mysql-5.1 given as:
"query 'select * from t2' failed. Table 'test.t2' doesn't exist".
In this case, the slave actually ran a couple of extra commands
as a result of which the slave first deleted the table and then
ran a select query on table, leading to the above mentioned failure.
=== Fix ===
1) Fixed the code for failure seen in rpl.rpl_row_until.
This test was also failing although the symptoms of
failure were different.
2) Copied the contents from rpl.rpl_row_until into
into engines/funcs.rpl.rpl_row_until.
3) Updated engines/funcs.rpl_row_until.result accordingly.
There are two calls to read_log_event() on master in mysql_binlog_send().
Each call reads 19 bytes in this test case and the error of the second
read_log_event() is reported to the slave.
The second read_log_event() starts from position 94 (75 + 19) to 113
(75 + 19 + 19). Usually, there are two events in the binary log:
. 0 - 3 - Header
. 4 - 105 - Format Descriptor Event
. 106 - 304 - Query Event
and both reads fail because operations are reading from invalid positions
as expected.
However, mysql_binlog_send() does not use the same IO_CACHE that is used to
write into binary log (i.e. mysql_bin_log.log_file) for the hot binary log.
It opens the binary log file directly by calling open_binlog() and creates a
separated IO_CACHE. So there is a possibly that after a master has flushed
the binary log file, the content has been cached by the filesystem, and has
not updated the disk file. If this happens, then a slave will only see part
of the file, and thus the second read_log_event() will report event truncated
error.
To fix the problem, if the first read_log_event() has failed, we ensure that
the second one will try to read from the same position.
On Solaris with version 3.4.6, the ha_example.so shared library is built
with DTrace and the server is built without DTrace support. This occurs
because dtrace.cmake disables DTrace support for 3.4.6, but still set
HAVE_DTRACE, which causes probes_mysql.h to include probes_mysql_dtrace.h
instead of probes_mysql_nodtrace.h.
This patch fixes this by not setting HAVE_DTRACE on Solaris for GCC 3.4.6.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/r/explain.result
Text conflict in mysql-test/r/having.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in storage/federated/ha_federated.cc
The test failed due to Bug #29790.
However, logics of the failing part does not need I_S selecting.
Fixing to remove the non-deterministic I_S selecting as redundant
from a part of the test dealing with BUG@22864.
--slave-load-tm
The MDL_SHARED lock was introduced for an object in 5.4, but the 'TABLE_LIST'
object was not initialized with the MDL_SHARED lock when applying event with
LOAD DATA INFILE into table. So the failure is caused when checking the
MDL_SHARED lock for the object.
To fix the problem, the 'TABLE_LIST' object was initialized with the MDL_SHARED
lock when applying event with LOAD DATA INFILE into table.
2617.31.12, 2617.31.15, 2617.31.15, 2617.31.16, 2617.43.1
- initial changeset that introduced the fix for
Bug#989 and follow up fixes for all test suite failures
introduced in the initial changeset.
------------------------------------------------------------
revno: 2617.31.1
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Fri 2009-03-06 19:17:00 -0300
message:
Bug#989: If DROP TABLE while there's an active transaction, wrong binlog order
WL#4284: Transactional DDL locking
Currently the MySQL server does not keep metadata locks on
schema objects for the duration of a transaction, thus failing
to guarantee the integrity of the schema objects being used
during the transaction and to protect then from concurrent
DDL operations. This also poses a problem for replication as
a DDL operation might be replicated even thought there are
active transactions using the object being modified.
The solution is to defer the release of metadata locks until
a active transaction is either committed or rolled back. This
prevents other statements from modifying the table for the
entire duration of the transaction. This provides commitment
ordering for guaranteeing serializability across multiple
transactions.
- Incompatible change:
If MySQL's metadata locking system encounters a lock conflict,
the usual schema is to use the try and back-off technique to
avoid deadlocks -- this schema consists in releasing all locks
and trying to acquire them all in one go.
But in a transactional context this algorithm can't be utilized
as its not possible to release locks acquired during the course
of the transaction without breaking the transaction commitments.
To avoid deadlocks in this case, the ER_LOCK_DEADLOCK will be
returned if a lock conflict is encountered during a transaction.
Let's consider an example:
A transaction has two statements that modify table t1, then table
t2, and then commits. The first statement of the transaction will
acquire a shared metadata lock on table t1, and it will be kept
utill COMMIT to ensure serializability.
At the moment when the second statement attempts to acquire a
shared metadata lock on t2, a concurrent ALTER or DROP statement
might have locked t2 exclusively. The prescription of the current
locking protocol is that the acquirer of the shared lock backs off
-- gives up all his current locks and retries. This implies that
the entire multi-statement transaction has to be rolled back.
- Incompatible change:
FLUSH commands such as FLUSH PRIVILEGES and FLUSH TABLES WITH READ
LOCK won't cause locked tables to be implicitly unlocked anymore.
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/r/show_check.result
Text conflict in mysql-test/r/sp-code.result
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/t/show_check.test
Text conflict in mysys/my_delete.c
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/log.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/repl_failsafe.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_yacc.yy
Text conflict in storage/myisam/ha_myisam.cc
Corrected results for
stm_auto_increment_bug33029.reject 2009-12-01
20:01:49.000000000 +0300
<andrei> @@ -42,9 +42,6 @@
<andrei> RETURN i;
<andrei> END//
<andrei> CALL p1();
<andrei> -Warnings:
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
There should be indeed no Note present because there is in fact autoincrement
top-level query in sp() that triggers inserting in yet another auto-inc table.
(todo: alert DaoGang to improve the test).
Disabling these two tests as they are affected by this bug / causing PB2 failures
on Windows platforms. Can always disable via include/not_windows.inc if
the bug fix looks like it will take some time.
The problem is that after disconnect, the DOPR TEMPORARY TABLE event didn't been
written into binlog. So after syncing with slave, the TEMPORARY table on slave
is not removed.
Waiting DROP TEMPORARY TABLE event to be written into binlog before sync slave with
master.
