In create_myisam_from_heap() mark all errors as fatal except
HA_ERR_RECORD_FILE_FULL for a HEAP table.
Not doing so could lead to problems, e.g. in a case when a
temporary MyISAM table gets overrun due to its MAX_ROWS limit
while executing INSERT/REPLACE IGNORE ... SELECT.
The SELECT execution was aborted, but the error was
converted to a warning due to IGNORE clause, so neither 'ok'
nor 'error' packet could be sent back to the client. This
condition led to hanging client when using 5.0 server, or
assertion failure in 5.1.
Problem was that a failing rename just left the partitions at the state
it was at the failure.
Solution was to try to revert the started rename if a failure occured.
not logged
Errors encountered during initialization of the SSL subsystem
are printed to stderr, rather than to the error log.
This patch adds a parameter to several SSL init functions to
report the error (if any) out to the caller. The function
init_ssl() in mysqld.cc is moved after the initialization of
the log subsystem, so that any error messages can be logged to
the error log. Printing of messages to stderr has been
retained to get diagnostic output in a client context.
Suppress warnings if binlog_format=STATEMENT and the current
database is filtered out using --binlog-[do|ignore]-db. This
was a regression in my previous patch.
This is a post-push fix addressing review requests and
problems with extra warnings.
Problem 1: The sub-statement where an unsafe warning was detected was
printed as part of the warning. This was ok for statements that
were unsafe due to, e.g., calls to UUID(), but did not make
sense for statements that were unsafe because there was more than
one autoincrement column (unsafeness in this case comes from the
combination of several sub-statements).
Fix 1: Instead of printing the sub-statement, print an explanation
of why the statement is unsafe.
Problem 2:
When a recursive construct (i.e., stored proceure, stored
function, trigger, view, prepared statement) contained several
sub-statements, and at least one of them was unsafe, there would be
one unsafeness warning per sub-statement - even for safe
sub-statements.
Fix 2:
Ensure that each type of warning is printed at most once, by
remembering throughout the execution of the statement which types
of warnings have been printed.
binlog
The fix for BUG 43929 introduced a regression issue. In a nutshell, when a
statement that changes a non-transactional table fails, it is written to the
binary log with the error code appended. Unfortunately, after BUG 43929, this
failure was flushing the transactional chace causing mismatch between execution
and logging histories. To fix this issue, we avoid flushing the transactional
cache when a commit or rollback is not issued.
When during the optimization an item is moved to the upper select
the item's context left unchanged. This caused wrong result in the
PS/SP mode.
The Item_ident::remove_dependence_processor now sets the context
of the select to which the item is moved to.
it returns misleading 'table is full'
Innodb returns a misleading error message "table is full"
when the number of active concurrent transactions is greater
than 1024.
Fixed by adding errorcode "ER_TOO_MANY_CONCURRENT_TRXS" to the
error codes. Innodb should return HA_TOO_MANY_CONCURRENT_TRXS
to mysql which is then mapped to ER_TOO_MANY_CONCURRENT_TRXS
Note: testcase is not written as this was reproducible only by
changing innodb code.
In a subselect all fields from outer selects are marked as dependent on
selects they are belong to. In some cases optimizer substitutes it for an
equivalent expression. For example "a_field IN (SELECT outer_field)" is
substituted with "a_field = outer_field". As we moved the outer_field to the
upper select it's not really outer anymore. But it was left marked as outer.
If exists an index over a_field optimizer choose wrong execution plan and thus
return wrong result.
Now the Item_in_subselect::single_value_transformer function removes dependent
marking from fields when a subselect is optimized away.
The "get_master_version_and_clock(...)" function in sql/slave.cc ignores
error and passes directly when queries fail, or queries succeed
but the result retrieved is empty.
The "get_master_version_and_clock(...)" function should try to reconnect master
if queries fail because of transient network problems, and fail otherwise.
The I/O thread should print a warning if the some system variables do not
exist on master (very old master)
table
The MERGE table storage engine does not support the HA_CAN_SQL_HANDLE feature
and any attempt to open the merge table will fail with ER_ILLEGAL_HA.
After an error occurred the tables that was opened must be closed again
or they will be left in an inconsistent state. However, the assumption
made in the code for closing and register handler tables was that only
one table will be opened, and this is not true for MERGE tables which
will cause multiple tables to open.
The next time a SELECT operation was issued on the merge table it
caused the system to freeze.
This patch fixes this issue by making sure that all tables which
are opened also are closed in the event of an error.
failed"
Do not assume that SQL prepared statements always run in text protocol.
When invoked from a stored procedure, which is itself invoked
by means of prepared CALL statement, the protocol may be binary.
Juggle with the protocol only when we want to change it
to binary in COM_STMT_EXECUTE, COM_STMT_PREPARE.
This is a backport from 5.4/6.0, where the bug was fixed
as part of WL#4264 "Backup: Stabilize Service Interface"
Fixed the following problems:
1. cmake 2.6 warning because of a changed default on
how the dependencies to libraries with a specified
path are resolved.
Fixed by requiring cmake 2.6.
2. Removed an obsolete pre-NT4 hack including defining
Windows system defines to alter the behavior of windows.h.
3. Disabled warning C4065 on compiling sql_yacc.cc because
of a know incompatibility in some of the newer bison binaries.
match against.
Server crashes when executing prepared statement with duplicating
MATCH() function calls in SELECT and ORDER BY expressions, e.g.:
SELECT MATCH(a) AGAINST('test') FROM t1 ORDER BY MATCH(a) AGAINST('test')
This query gets optimized by the server, so the value returned
by MATCH() from the SELECT list is reused for ORDER BY purposes.
To make this optimization server is comparing items from
SELECT and ORDER BY lists. We were getting server crash because
comparision function for MATCH() item is not intended to be called
at this point of execution.
In 5.0 and 5.1 this problem is workarounded by resetting MATCH()
item to the state as it was during PREPARE.
In 6.0 correct comparision function will be implemented and
duplicating MATCH() items from the ORDER BY list will be
optimized.
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
"create as select" (innodb table)
Problem: code constructing "CREATE TABLE..." statement
doesn't take into account that current database is not set
in some cases. That may lead to a server crash.
Fix: check if current database is set.
without error
When using quick access methods for searching rows in UPDATE or
DELETE there was no check if a fatal error was not already sent
to the client while evaluating the quick condition.
As a result a false OK (following the error) was sent to the
client and the error was thus transformed into a warning.
Fixed by checking for errors sent to the client during
SQL_SELECT::check_quick() and treating them as real errors.
Fixed a wrong test case in group_min_max.test
Fixed a wrong return code in mysql_update() and mysql_delete()
mutually-nested subqueries
Queries of the form
SELECT * FROM (SELECT 1) AS t1,
(SELECT 2) AS t2,...
(SELECT 32) AS t32
caused the "Too high level of nesting for select" error
as if the query has a form
SELECT * FROM (SELECT 1 FROM (SELECT 2 FROM (SELECT 3 FROM...
The table_factor parser rule has been modified to adjust
the LEX::nest_level variable value after every derived table.
sort_buffer_size cannot allocate
The NULL return from tree_insert() (on low memory) was not
checked for in Item_func_group_concat::add(). As a result
on low memory conditions a crash happens.
Fixed by properly checking the return code.
When the function exits with an error it was not
freeing the local Unique class instance.
Fixed my making sure all the places where the function
returns from are freeing the Unique instance
