- Build sql files for netware from the mysql_system_tables*.sq files
- Fix comments about mysql_create_system_tables.sh
- Use mysql_install_db.sh to create system tables for mysql_test-run-shell
- Fix mysql-test-run.pl to also look in share/mysql for the msyql_system*.sql files
Changeset coded today by Magnus Svensson, just the application to 5.0.38 is by Joerg Bruehe.
- Build sql files for netware from the mysql_system_tables*.sq files
- Fix comments about mysql_create_system_tables.sh
- Use mysql_install_db.sh to create system tables for mysql_test-run-shell
- Fix mysql-test-run.pl to also look in share/mysql for the msyql_system*.sql files
BUG#26429: SHOW CREATE EVENT is incorrect for an event that
STARTS NOW()
BUG#26431: Impossible to re-create an event from backup if its
STARTS clause is in the past
WL#3698: Events: execution in local time zone
The problem was that local times specified by the user in AT, STARTS
and ENDS of CREATE EVENT/ALTER EVENT statement were converted to UTC,
and the original time zone was forgotten. This way, event scheduler
couldn't honor Daylight Saving Time shifts, and times shown to the
user were also in UTC. Additionally, CREATE EVENT didn't allow times
in the past, thus preventing straightforward event restoration from
old backups.
This patch reworks event scheduler time computations, performing them
in the time zone associated with the event. Also it allows times to
be in the past.
The patch adds time_zone column to mysql.event table.
NOTE: The patch is almost final, but the bug#9953 should be pushed
first.
Problem: to handle a situation when the size of event on the master is greater than max_allowed_packet on slave, we checked for the wrong constant (ER_NET_PACKET_TOO_LARGE instead of CR_NET_PACKET_TOO_LARGE).
Solution: test for the client "packet too large" error code instead of the server one in slave I/O thread.
UPDATE if the row wasn't actually changed.
This bug was caused by fix for bug#19978. It causes AFTER UPDATE triggers
not firing if a row wasn't actually changed by the update part of the
INSERT .. ON DUPLICATE KEY UPDATE.
Now triggers are always fired if a row is touched by the INSERT ... ON
DUPLICATE KEY UPDATE.
- Crash occured because Event engine is only initialized if
ACLs are used but not properly marked as disabled.
- The patch is to mark the Event engine as DISABLED if no ACLs
are used to avoid access of uninitialized variables.
This changeset adds replication of events and user-defined functions.
There are several bug reports involved in this change:
BUG#16421, BUG#17857, BUG#20384:
This patch modifies the mysql.events table to permit the addition of
another enum value for the status column. The column now has values
of ('DISABLED','SLAVESIDE_DISABLED','ENABLED'). A status of
SLAVESIDE_DISABLED is set on the slave during replication of events.
This enables users to determine which events werereplicated from the
master and to later enable them if they promote the slave to a master.
The CREATE, ALTER, and DROP statements are binlogged.
A new test was added for replication of events (rpl_events).
BUG#17671:
This patch modifies the code to permit logging of user-defined functions.
Note: this is the CREATE FUNCTION ... SONAME variety. A more friendly error
message to be displayed should a replicated user-defined function not be
found in the loadable library or if the library is missing from the
slave.The CREATE andDROP statements are binlogged. A new test was added
for replication of user-defined functions (rpl_udf).
The patch also adds a new column to the mysql.event table named
'originator' that is used to store the server_id of the server that
the event originated on. This enables users to promote a slave to a
master and later return the promoted slave to a slave and disable the
replicated events.
- Stored procedures returning unsinged values returns signed values if
text protocol is used. The reason is that the stored proceedure item
Item_func_sp wasn't initializing the member variables properly based
on the information contained in the associated result field.
- The patch is to upon field-item association, ::fix_fields, initialize
the member variables in appropriate order.
- Field type of an Item_func_sp was hard coded to MYSQL_TYPE_VARCHAR.
This is changed to return the type of the actual result field.
- Member function name sp_result_field was refactored to the more
appropriate init_result_field.
- Member function name find_and_check_access was refactored to
sp_check_access.
INSERT uses query_id to verify what fields are
mentioned in the fields list of the INSERT command.
However the check for that is made after the
ON DUPLICATE KEY is processed. This causes all
the fields mentioned in ON DUPLICATE KEY to be
considered as mentioned in the fields list of
INSERT.
Moved the check up, right after processing the
fields list.
touched but not actually changed.
The LAST_INSERT_ID() is reset to 0 if no rows were inserted or changed.
This is the case when an INSERT ... ON DUPLICATE KEY UPDATE updates a row
with the same values as the row contains.
Now the LAST_INSERT_ID() values is reset to 0 only if there were no rows
successfully inserted or touched.
The new 'touched' field is added to the COPY_INFO structure. It holds the
number of rows that were touched no matter whether they were actually
changed or not.
TABLE ... WRITE".
Memory and CPU hogging occured when connection which had to wait for table
lock was serviced by thread which previously serviced connection that was
killed (note that connections can reuse threads if thread cache is enabled).
One possible scenario which exposed this problem was when thread which
provided binlog dump to replication slave was implicitly/automatically
killed when the same slave reconnected and started pulling data through
different thread/connection.
The problem also occured when one killed particular query in connection
(using KILL QUERY) and later this connection had to wait for some table
lock.
This problem was caused by the fact that thread-specific mysys_var::abort
variable, which indicates that waiting operations on mysys layer should
be aborted (this includes waiting for table locks), was set by kill
operation but was never reset back. So this value was "inherited" by the
following statements or even other connections (which reused the same
physical thread). Such discrepancy between this variable and THD::killed
flag broke logic on SQL-layer and caused CPU and memory hogging.
This patch tries to fix this problem by properly resetting this member.
There is no test-case associated with this patch since it is hard to test
for memory/CPU hogging conditions in our test-suite.
TABLE ... WRITE".
CPU hogging occured when connection which had to wait for table lock was
serviced by thread which previously serviced connection that was killed
(note that connections can reuse threads if thread cache is enabled).
One possible scenario which exposed this problem was when thread which
provided binlog dump to replication slave was implicitly/automatically
killed when the same slave reconnected and started pulling data through
different thread/connection.
In 5.* versions memory hogging was added to CPU hogging. Moreover in
those versions the problem also occured when one killed particular query
in connection (using KILL QUERY) and later this connection had to wait for
some table lock.
This problem was caused by the fact that thread-specific mysys_var::abort
variable, which indicates that waiting operations on mysys layer should
be aborted (this includes waiting for table locks), was set by kill
operation but was never reset back. So this value was "inherited" by the
following statements or even other connections (which reused the same
physical thread). Such discrepancy between this variable and THD::killed
flag broke logic on SQL-layer and caused CPU and memory hogging.
This patch tries to fix this problem by properly resetting this member.
There is no test-case associated with this patch since it is hard to test
for memory/CPU hogging conditions in our test-suite.
Before this fix, the parser would accept illegal code in SQL exceptions
handlers, that later causes the runtime to crash when executing the code,
due to memory violations in the exception handler stack.
The root cause of the problem is instructions within an exception handler
that jumps to code located outside of the handler. This is illegal according
to the SQL 2003 standard, since labels located outside the handler are not
supposed to be visible (they are "out of scope"), so any instruction that
jumps to these labels, like ITERATE or LEAVE, should not parse.
The section of the standard that is relevant for this is :
SQL:2003 SQL/PSM (ISO/IEC 9075-4:2003)
section 13.1 <compound statement>,
syntax rule 4
<quote>
The scope of the <beginning label> is CS excluding every <SQL schema
statement> contained in CS and excluding every
<local handler declaration list> contained in CS. <beginning label> shall
not be equivalent to any other <beginning label>s within that scope.
</quote>
With this fix, the C++ class sp_pcontext, which represent the "parsing
context" tree (a.k.a symbol table) of a stored procedure, has been changed
as follows:
- constructors have been cleaned up, so that only building a root node for
the tree is public; building nodes inside a tree is not public.
- a new member, m_label_scope, indicates if a given syntactic context
belongs to a DECLARE HANDLER block,
- label resolution, in the method find_label(), has been changed to
implement the restriction of scope regarding labels used in a compound
statement.
The actions in the parser, when parsing the body of a SQL exception handler,
have been changed as follows:
- the implementation of an exception handler (DECLARE HANDLER) now creates
explicitly a new sp_pcontext, to isolate the code inside the handler from
the containing compound statement context.
- registering exception handlers as a result occurs in the parent context,
see the rule sp_hcond_element
- the code in sp_hcond_list has been cleaned up, to avoid code duplication
In addition, the flags IN_SIMPLE_CASE and IN_HANDLER, declared in sp_head.h
have been removed, since they are unused and broken by design (as seen with
Bug 19194 (Right recursion in parser for CASE causes excessive stack usage,
limitation), representing a stack in a single flag is not possible.
Tests in sp-error have been added to show that illegal constructs are now
rejected.
Tests in sp have been added for code coverage, to show that ITERATE or LEAVE
statements are legal when jumping to a label in scope, inside the body of
an exception handler.
my_seek: Assertion `fd != -1' failed"
In difficult optimize/repair situations the server could crash.
Under some circumstances the server retries an optimize/repair
with more elaborate options. But it did not check if the first
attempt failed so badly that a second one must not be tried.
This could happen when a new data file has been created
but it was not possible to open it. In this case the
repair leaves behind a table with closed data file.
This must not be used for another repair attempt.
We do now detect the closed data file and do not try
another repair attempt in this situation.
No test case. The required table corruption can not be
repeated easily. There is a test program attached to
bug 25433.
