as well as
MDEV-19500 Update with join stopped worked if there is a call to a procedure in a trigger
MDEV-19521 Update Table Fails with Trigger and Stored Function
MDEV-19497 Replication stops because table not found
MDEV-19527 UPDATE + JOIN + TRIGGERS = table doesn't exists error
Reimplement the fix for (5d510fdbf0)
MDEV-18507 can't update temporary table when joined with table with triggers on read-only
instead of calling open_tables() twice, put multi-update
prepare code inside open_tables() loop.
Add a test for a MDL backoff-and-retry loop inside open_tables()
across multi-update prepare code.
triggers are opened and tables used in triggers are prelocked in
open_tables(). But multi-update can detect what tables will actually
be updated only later, after all main tables are opened.
Meaning, if a table is used in multi-update, but is not actually updated,
its on-update treggers will be opened and tables will be prelocked,
even if it's unnecessary. This can cause more tables to be
write-locked than needed, causing read_only errors, privilege errors
and lock waits.
Fix: don't open/prelock triggers unless table->updating is true.
In multi-update after setting table->updating=true, do a second
open_tables() for newly added tables, if any.
* some of these tests run just fine with InnoDB:
-> s/have_xtradb/have_innodb/
* sys_var tests did basic tests for xtradb only variables
-> remove them, they're useless anyway (sysvar_innodb does it better)
* multi_update had innodb specific tests
-> move to multi_update_innodb.test
back-ported the patch for bug #13256831 from mysql-5.6 code line.
Here's the comment this patch was provided with:
Fixed bug#13256831 - ERROR 1032 (HY000): CAN'T FIND RECORD.
This bug only occurs if a user tries to update a base table using
an updatable view and this view was created as a join for which
the clause 'WITH CHECK OPTION' was specified.
The reason for the bug was that when such an update was
executed, row positions were not properly handled for tables
that were not updated but had constraints that had to be
checked due to the 'WITH CHECK OPTION' clause.
The reason for the bug was that when such update is executed
then for tables specified in the view definition and
also listed in the 'WITH CHECK OPTION' clause the positioning to
row being updated is not performed.
The problem was that on opening all tables TL_WRITE, than local tables which is not updated set to TL_READ, but underlying tables of MyISAMmrg left untouched.
Prartition engine has not this problem.
All cases where lock_type assigned is not changed because call of virtual function is not cheap.
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
Fixed a typo in the comment.
Fixing test cases which were previouslyno throwing due
disable warnings macro.
sql/sql_base.cc:
Change in indentation and fixing a typo in the comment.
Problem: Statements that write to tables with auto_increment columns
based on the selection from another table, may lead to master
and slave going out of sync, as the order in which the rows
are retrieved from the table may differ on master and slave.
Solution: We mark writing to a table with auto_increment table
based on the rows selected from another table as unsafe. This
will cause the execution of such statements to throw a warning
and forces the statement to be logged in ROW if the logging
format is mixed.
Changes:
1. All the statements that writes to a table with auto_increment
column(s) based on the rows fetched from another table, will now
be unsafe.
2. CREATE TABLE with SELECT will now be unsafe.
sql/share/errmsg-utf8.txt:
Added new warning messages.
sql/sql_base.cc:
-Created function to check statements that write to
tables with auto_increment column and has select.
-Marked all the statements that write to a table
with auto_increment column based on rows fetched
from other table(s) as unsafe.
sql/sql_table.cc:
mark CREATE TABLE[with auto_increment column] as unsafe.
Problem: Statements that write to tables with auto_increment columns
based on the selection from another table, may lead to master
and slave going out of sync, as the order in which the rows
are retrived from the table may differ on master and slave.
Solution: We mark writing to a table with auto_increment table
as unsafe. This will cause the execution of such statements to
throw a warning and forces the statement to be logged in ROW if
the logging format is mixed.
Changes:
1. All the statements that writes to a table with auto_increment
column(s) based on the rows fetched from another table, will now
be unsafe.
2. CREATE TABLE with SELECT will now be unsafe.
sql/share/errmsg-utf8.txt:
Added new Warning messages
sql/sql_base.cc:
created a new function that checks for select + write on a autoinc table
made all such statements to be unsafe.
sql/sql_parse.cc:
made create autoincremnet tabble + select unsafe
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
UPDATED TWICE
For multi update it is not allowed to update a column
of a table if that table is accessed through multiple aliases
and either
1) the updated column is used as partitioning key
2) the updated column is part of the primary key
and the primary key is clustered
This check is done in unsafe_key_update().
The bug was that for case 2), it was checked whether
updated_column_number == table_share->primary_key
However, the primary_key variable is the index number of the
primary key, not a column number.
Prior to this bugfix, the first column was wrongly believed to be
the primary key. The columns covered by an index is found in
table->key_info[idx_number]->key_part. The bugfix is to check if
any of the columns in the keyparts of the primary key are
updated.
The user-visible effect is that for storage engines with
clustered primary key (e.g. InnoDB but not MyISAM) queries
like
"UPDATE t1 AS A JOIN t2 AS B SET A.primkey=..."
will now error with
"ERROR HY000: Primary key/partition key update is not allowed
since the table is updated both as 'A' and 'B'."
instead of
"ERROR 1032 (HY000): Can't find record in 't1_tb'"
even if primkey is not the first column in the table. This
was the intended behavior of bugfix 11764529.
mysql-test/r/multi_update.result:
Add test for bug#11882110
mysql-test/r/multi_update_innodb.result:
Add test for bug#11882110
mysql-test/t/multi_update.test:
Add test for bug#11882110
mysql-test/t/multi_update_innodb.test:
Add test for bug#11882110
sql/sql_update.cc:
unsafe_key_update() wrongly checked if the primary key index
number was the same as updated column number. Now it is checked
whether any of the columns making up the primary key is updated.
sql/table.h:
Fix comment on TABLE_SHARE::primary_key. Incorrect comment
was introduced by an earlier merge conflict (as per dlenev)
The patch imposes unconditional materialization for derived tables
used in update and multi-update statements.
Fixed a bug with a wrong order of processing derived tables/views
at the prepare stage that caused a crash for the variant of the
query from test case for bug 52157.
Two of them (in the function make_join_statistics and in the function
sort_and_filter_keyuse) were due to bad merges while the third bug was
triggered by uninitialized values of the field JOIN_TAB::preread_init_done.
Fixed a compiler warning in mysql_priv.h.
Commented out some queries from the funcs_1 suite returning wrong
errors due to bugs concerning updatable views (see bugs 784297 and
784303).
Adjusted some results for the test cases with derived tables from
different suites.
Resolved all conflicts, bad merges and fixed a few minor bugs in the code.
Commented out the queries from multi_update, view, subselect_sj, func_str,
derived_view, view_grant that failed either with crashes in ps-protocol or
with wrong results.
The failures are clear indications of some bugs in the code and these bugs
are to be fixed.
UPDATES THE TABLE ENTRIES (formerly 55385)
BUG#11764529: MULTI UPDATE+INNODB REPORTS ER_KEY_NOT_FOUND
IF A TABLE IS UPDATED TWICE (formerly 57373)
If multiple-table update updates a row through two aliases and
the first update physically moves the row, the second update will
fail to locate the row. This results in different errors
depending on storage engine:
* MyISAM: Got error 134 from storage engine
* InnoDB: Can't find record in 'tbl'
None of these errors accurately describe the problem.
Furthermore, since MyISAM is non-transactional, the update
executed first will be performed while the second will not.
In addition, for two equal multiple-table update statements,
one could succeed and the other fail based on whether or not
the record actually moved or not. This was inconsistent.
Two update operations may physically move a row:
1) Update of a column in a clustered primary key
2) Update of a column used to calculate which partition the
row belongs to
BUG#11764529 is about case 1) above, BUG#11762751 was about case 2).
The fix for these bugs is to return with an error if multiple-table
update is about to:
a) Update a table through multiple aliases, and
b) Perform an update that may physically more the row
in at least one of these aliases
This avoids
* partial updates as described for MyISAM above,
* provides the same error message that describes the actual problem
for all SEs
* inconsistent behavior where a statement fails or succeeds based on
e.g. the partitioning algorithm of the table.
mysql-test/r/multi_update.result:
Add test for bug#57373
mysql-test/r/multi_update_innodb.result:
Add test for bug#57373
mysql-test/r/partition.result:
Add test for bug#55385
mysql-test/t/multi_update.test:
Add test for bug#57373
mysql-test/t/multi_update_innodb.test:
Add test for bug#57373
mysql-test/t/partition.test:
Add test for bug#55385
sql/handler.cc:
Translate handler error HA_ERR_RECORD_DELETED to server error
sql/share/errmsg-utf8.txt:
New error message for multi-table update where the same table is updated multiple times.
sql/sql_update.cc:
Add function unsafe_key_update()
- Fixed some issues with partitions and connection_string, which also fixed lp:716890 "Pre- and post-recovery crash in Aria"
- Fixed wrong assert in Aria
Now need to merge with latest xtradb before pushing
sql/ha_partition.cc:
Ensure that m_ordered_rec_buffer is not freed before close.
sql/mysqld.cc:
Changed to use opt_stack_trace instead of opt_pstack.
Removed references to pstack
sql/partition_element.h:
Ensure that connect_string is initialized
storage/maria/ma_key_recover.c:
Fixed wrong assert
It includes speed optimizations for HANDLER READ by caching as much as possible in HANDLER OPEN
Other things:
- Added mysqld option --disable-thr-alarm to be able to benchmark things without thr_alarm
- Changed 'Locked' state to 'System lock' and 'Table lock' (these where used in the code but never shown to end user)
- Better error message if mysql_install_db.sh fails
- Moved handler function prototypes to sql_handler.h
- Remove not anymore used 'thd->locked' member
include/thr_alarm.h:
Added my_disable_thr_alarm
include/thr_lock.h:
Add new member to THR_LOCK_DATA to remember original lock type state. This is needed as thr_unlock() resets type to TL_UNLOCK.
mysql-test/include/check_no_concurrent_insert.inc:
Locked -> Table lock
mysql-test/include/handler.inc:
Locked -> Table lock
mysql-test/r/handler_innodb.result:
Updated results for new tests
mysql-test/r/handler_myisam.result:
Updated results for new tests
mysql-test/r/sp-threads.result:
Locked -> Table lock
mysql-test/suite/binlog/t/binlog_stm_row.test:
Locked -> Table lock
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Locked -> Table lock
mysql-test/suite/pbxt/t/lock_multi.test:
Locked -> Table lock
mysql-test/suite/sys_vars/r/concurrent_insert_func.result:
Locked -> Table lock
mysql-test/suite/sys_vars/t/concurrent_insert_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/delayed_insert_limit_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/query_cache_wlock_invalidate_func.test:
Locked -> Table lock
mysql-test/suite/sys_vars/t/sql_low_priority_updates_func.test:
Locked -> Table lock
mysql-test/t/insert_notembedded.test:
Locked -> Table lock
mysql-test/t/lock_multi.test:
Locked -> Table lock
mysql-test/t/merge-big.test:
Locked -> Table lock
mysql-test/t/multi_update.test:
Locked -> Table lock
mysql-test/t/query_cache_28249.test:
Locked -> Table lock
mysql-test/t/sp_notembedded.test:
Locked -> Table lock
mysql-test/t/sp_sync.test:
Locked -> Table lock
mysql-test/t/status.test:
Locked -> Table lock
mysql-test/t/trigger_notembedded.test:
Locked -> Table lock
mysys/thr_alarm.c:
Added option to disable thr_alarm
mysys/thr_lock.c:
Detect loops
scripts/mysql_install_db.sh:
Give better error message if something goes wrong
sql/Makefile.am:
Added sql_handler.h
sql/lock.cc:
Split functions to allow one to cache value if store_lock() (for HANDLER functions).
- Split mysql_lock_tables() into two functions, where first one allocates MYSQL_LOCK and other other one uses it.
- Made get_lock_data() an external function.
- Added argument to mysql_unlock_tables() to not free sql_lock.
- Added argument to reset_lock_data() to reset lock structure to initial state (as after get_lock_data())
sql/mysql_priv.h:
Moved handler function prototypes to sql_handler.h
Added new lock functions.
sql/mysqld.cc:
Added --thread-alarm startup option
sql/net_serv.cc:
Don't call vio_blocking() if not needed
sql/sql_base.cc:
include sql_handler.h
sql/sql_class.cc:
include sql_handler.h
Remove not anymore used 'thd->locked' member
sql/sql_class.h:
Remove not anymore used 'thd->locked' member
sql/sql_db.cc:
include sql_handler.h
sql/sql_delete.cc:
include sql_handler.h
sql/sql_handler.cc:
Rewrote all code to use SQL_HANDLER instead of TABLE_LIST (original interface)
Rewrote mysql_ha_open() to cache all things from TABLE_LIST and items for field list, where etc.
In mysql_ha_open() also cache MYSQL_LOCK structure from get_lock_data().
Split functions into smaller sub functions (needed to be able to implement mysql_ha_read_prepare())
Added mysql_ha_read_prepare() to allow one to prepare HANDLER READ.
sql/sql_handler.h:
Interface to sql_handler.cc
sql/sql_parse.cc:
include sql_handler.h
sql/sql_prepare.cc:
Added mysql_test_handler_read(), prepare for HANDLER READ
sql/sql_rename.cc:
include sql_handler.h
sql/sql_show.cc:
Removed usage of thd->locked
sql/sql_table.cc:
include sql_handler.h
sql/sql_trigger.cc:
include sql_handler.h
--Bug#52157 various crashes and assertions with multi-table update, stored function
--Bug#54475 improper error handling causes cascading crashing failures in innodb/ndb
--Bug#57703 create view cause Assertion failed: 0, file .\item_subselect.cc, line 846
--Bug#57352 valgrind warnings when creating view
--Recently discovered problem when a nested materialized derived table is used
before being populated and it leads to incorrect result
We have several modes when we should disable subquery evaluation.
The reasons for disabling are different. It could be
uselessness of the evaluation as in case of 'CREATE VIEW'
or 'PREPARE stmt', or we should disable subquery evaluation
if tables are not locked yet as it happens in bug#54475, or
too early evaluation of subqueries can lead to wrong result
as it happened in Bug#19077.
Main problem is that if subquery items are treated as const
they are evaluated in ::fix_fields(), ::fix_length_and_dec()
of the parental items as a lot of these methods have
Item::val_...() calls inside.
We have to make subqueries non-const to prevent unnecessary
subquery evaluation. At the moment we have different methods
for this. Here is a list of these modes:
1. PREPARE stmt;
We use UNCACHEABLE_PREPARE flag.
It is set during parsing in sql_parse.cc, mysql_new_select() for
each SELECT_LEX object and cleared at the end of PREPARE in
sql_prepare.cc, init_stmt_after_parse(). If this flag is set
subquery becomes non-const and evaluation does not happen.
2. CREATE|ALTER VIEW, SHOW CREATE VIEW, I_S tables which
process FRM files
We use LEX::view_prepare_mode field. We set it before
view preparation and check this flag in
::fix_fields(), ::fix_length_and_dec().
Some bugs are fixed using this approach,
some are not(Bug#57352, Bug#57703). The problem here is
that we have a lot of ::fix_fields(), ::fix_length_and_dec()
where we use Item::val_...() calls for const items.
3. Derived tables with subquery = wrong result(Bug19077)
The reason of this bug is too early subquery evaluation.
It was fixed by adding Item::with_subselect field
The check of this field in appropriate places prevents
const item evaluation if the item have subquery.
The fix for Bug19077 fixes only the problem with
convert_constant_item() function and does not cover
other places(::fix_fields(), ::fix_length_and_dec() again)
where subqueries could be evaluated.
Example:
CREATE TABLE t1 (i INT, j BIGINT);
INSERT INTO t1 VALUES (1, 2), (2, 2), (3, 2);
SELECT * FROM (SELECT MIN(i) FROM t1
WHERE j = SUBSTRING('12', (SELECT * FROM (SELECT MIN(j) FROM t1) t2))) t3;
DROP TABLE t1;
4. Derived tables with subquery where subquery
is evaluated before table locking(Bug#54475, Bug#52157)
Suggested solution is following:
-Introduce new field LEX::context_analysis_only with the following
possible flags:
#define CONTEXT_ANALYSIS_ONLY_PREPARE 1
#define CONTEXT_ANALYSIS_ONLY_VIEW 2
#define CONTEXT_ANALYSIS_ONLY_DERIVED 4
-Set/clean these flags when we perform
context analysis operation
-Item_subselect::const_item() returns
result depending on LEX::context_analysis_only.
If context_analysis_only is set then we return
FALSE that means that subquery is non-const.
As all subquery types are wrapped by Item_subselect
it allow as to make subquery non-const when
it's necessary.
mysql-test/r/derived.result:
test case
mysql-test/r/multi_update.result:
test case
mysql-test/r/view.result:
test case
mysql-test/suite/innodb/r/innodb_multi_update.result:
test case
mysql-test/suite/innodb/t/innodb_multi_update.test:
test case
mysql-test/suite/innodb_plugin/r/innodb_multi_update.result:
test case
mysql-test/suite/innodb_plugin/t/innodb_multi_update.test:
test case
mysql-test/t/derived.test:
test case
mysql-test/t/multi_update.test:
test case
mysql-test/t/view.test:
test case
sql/item.cc:
--removed unnecessary code
sql/item_cmpfunc.cc:
--removed unnecessary checks
--THD::is_context_analysis_only() is replaced with LEX::is_ps_or_view_context_analysis()
sql/item_func.cc:
--refactored context analysis checks
sql/item_row.cc:
--removed unnecessary checks
sql/item_subselect.cc:
--removed unnecessary code
--added DBUG_ASSERT into Item_subselect::exec()
which asserts that subquery execution can not happen
if LEX::context_analysis_only is set, i.e. at context
analysis stage.
--Item_subselect::const_item()
Return FALSE if LEX::context_analysis_only is set.
It prevents subquery evaluation in ::fix_fields &
::fix_length_and_dec at context analysis stage.
sql/item_subselect.h:
--removed unnecessary code
sql/mysql_priv.h:
--Added new set of flags.
sql/sql_class.h:
--removed unnecessary code
sql/sql_derived.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_lex.cc:
--init LEX::context_analysis_only field
sql/sql_lex.h:
--New LEX::context_analysis_only field
sql/sql_parse.cc:
--removed unnecessary code
sql/sql_prepare.cc:
--removed unnecessary code
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_select.cc:
--refactored context analysis checks
sql/sql_show.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
sql/sql_view.cc:
--added LEX::context_analysis_only analysis intialization/cleanup
inited==INDEX
When an error occurs while sending the data in a temporary table there was no
cleanup performed. This caused a failed assertion in the case when different
access methods were used for populating the table vs. retrieving the data from
the table if IGNORE was specified and sql_safe_updates = 0. In this case
execution continues, but the handler expects to continue with the access
method used for row retrieval.
Fixed by doing the cleanup even if errors occur.
FLUSH TABLES <list> WITH READ LOCK are incompatible" to
be pushed as separate patch.
Replaced thread state name "Waiting for table", which was
used by threads waiting for a metadata lock or table flush,
with a set of names which better reflect types of resources
being waited for.
Also replaced "Table lock" thread state name, which was used
by threads waiting on thr_lock.c table level lock, with more
elaborate "Waiting for table level lock", to make it
more consistent with other thread state names.
Updated test cases and their results according to these
changes.
Fixed sys_vars.query_cache_wlock_invalidate_func test to not
to wait for timeout of wait_condition.inc script.
mysql-test/r/query_cache.result:
Added test coverage for query_cache_wlock_invalidate
behavior for implicitly locked tables.
mysql-test/suite/sys_vars/r/query_cache_wlock_invalidate_func.result:
Fixed sys_vars.query_cache_wlock_invalidate_func test to not
to wait for timeout of wait_condition.inc script. Reverted
changes to test which introduced timeout and replaced waiting
condition with a more appropriate one.
Test coverage for query_cache_wlock_invalidate behavior for
implicitly locked tables was added to query_cache.test.
mysql-test/suite/sys_vars/t/query_cache_wlock_invalidate_func.test:
Fixed sys_vars.query_cache_wlock_invalidate_func test to not
to wait for timeout of wait_condition.inc script. Reverted
changes to test which introduced timeout and replaced waiting
condition with a more appropriate one.
Test coverage for query_cache_wlock_invalidate behavior for
implicitly locked tables was added to query_cache.test.
mysql-test/t/query_cache.test:
Added test coverage for query_cache_wlock_invalidate
behavior for implicitly locked tables.
mysys/thr_lock.c:
Replaced "Table lock" thread state name, which was used by
threads waiting on thr_lock.c table level lock, with more
elaborate "Waiting for table level lock", to make it
consistent with thread state names which are used while
waiting for metadata locks and table flush.
sql/mdl.cc:
Replaced thread state name "Waiting for table", which was
used by threads waiting for a metadata lock or table flush,
with a set of names which better reflect types of resources
being waited for.
To implement this:
- Adjusted MDL_wait::timed_wait() to take thread state name
as parameter.
- Introduced method of MDL_key class which allows to get
thread state name to be used while waiting for resource
corresponding to the key and changed code to use it.
Added array translating namespaces to thread state names
as part of this change.
sql/mdl.h:
To implement this:
- Adjusted MDL_wait::timed_wait() to take thread state name
as parameter.
- Introduced method of MDL_key class which allows to get
thread state name to be used while waiting for resource
corresponding to the key and changed code to use it.
Added array translating namespaces to thread state names
as part of this change.
sql/sql_base.cc:
Replaced thread state name "Waiting for table", which was
used by threads waiting for table flush, with a more elaborate
"Waiting for table flush".
Some of the test cases reference to binlog position and
these position numbers are written into result explicitly.
It is difficult to maintain if log event format changes.
There are a couple of cases explicit position number appears,
we handle them in different ways
A. 'CHANGE MASTER ...' with MASTER_LOG_POS or/and RELAY_LOG_POS options
Use --replace_result to mask them.
B. 'SHOW BINLOG EVENT ...'
Replaced by show_binlog_events.inc or wait_for_binlog_event.inc.
show_binlog_events.inc file's function is enhanced by given
$binlog_file and $binlog_limit.
C. 'SHOW SLAVE STATUS', 'show_slave_status.inc' and 'show_slave_status2.inc'
For the test cases just care a few items in the result of 'SHOW SLAVE STATUS',
only the items related to each test case are showed.
'show_slave_status.inc' is rebuild, only the given items in $status_items
will be showed.
'check_slave_is_running.inc' and 'check_slave_no_error.inc'
and 'check_slave_param.inc' are auxiliary files helping
to show running status and error information easily.
mysql-test/extra/binlog_tests/binlog.test:
It only cares whether current binlog file index is changed, so it is ok
with 'show_master_status.inc' instead of 'show mater status'.
mysql-test/extra/binlog_tests/blackhole.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_deadlock.test:
Use 'check_slave_is_running.inc' instead of 'show_slave_status2.inc'.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Use 'wait_for_slave_sql_error.inc' and 'ait_for_slave_sql_error_and_skip.inc' instead of 'show slave status'.
mysql-test/extra/rpl_tests/rpl_flsh_tbls.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
It is need now to give a error number, so use 'wait_for_slave_io_to_stop.inc'
instead of 'wait_for_slave_io_error.inc'.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
se 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/extra/rpl_tests/rpl_reset_slave.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc' statement.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
mysql-test/extra/rpl_tests/rpl_row_tabledefs.test:
Use 'show_slave_error_status_and_skip.inc' instead of 'show slave status'.
mysql-test/include/check_slave_is_running.inc:
To make sure both sql and io thread are running well. If not, the test will be aborted.
mysql-test/include/check_slave_no_error.inc:
To make sure both sql and io thread have no error. If not, the test will be aborted.
mysql-test/include/get_relay_log_pos.inc:
According to the position of a log event in master binlog file,
find the peer position of a log event in relay log file.
mysql-test/include/rpl_stmt_seq.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/include/show_binlog_events.inc:
Add two options $binlog_file and $binlog_limit for showing binlog events from different binlog files or/and given different limits on position or row number.
mysql-test/include/show_rpl_debug_info.inc:
Add 'SELECT NOW()' in the debug information.
mysql-test/include/show_slave_status.inc:
It's more clean and tidy Only the given columns of slave status are printed.
mysql-test/include/test_fieldsize.inc:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/include/wait_for_binlog_event.inc:
Use show_rpl_debug_info.inc instead of 'SHOW BINLOG EVENTS'.
mysql-test/include/wait_for_slave_io_error.inc:
Add $slave_io_errno and $show_slave_io_error, it waits only a given error.
mysql-test/include/wait_for_slave_param.inc:
Use die instead of exit.
mysql-test/include/wait_for_slave_sql_error.inc:
Add $slave_sql_errno and $show_slave_sql_error, it waits only a given error.
mysql-test/include/wait_for_status_var.inc:
Use die instead of exit.
mysql-test/r/flush_block_commit_notembedded.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/r/multi_update.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_innodb.result:
It checks whether somethings are binlogged, so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/binlog/t/binlog_innodb.test:
It checks whether somethings are binlogged, so we use 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/binlog/t/binlog_stm_binlog.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/r/rpl_bug36391.result:
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/bugs/t/rpl_bug12691.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/bugs/t/rpl_bug36391.test:
'show master status' is replaced by 'show_master_status.inc'.
Position in the result of 'show master status' is replaced by '#'.
mysql-test/suite/engines/funcs/r/rpl_000015.result:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/suite/engines/funcs/t/rpl_000015.test:
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_REDIRECT.test:
Use 'query_vertical SHOW SLAVE STATUS' instead of 'show slave status'.
There is no status columns in the result file, for no slave exists on master's server.
mysql-test/suite/engines/funcs/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/engines/funcs/t/rpl_empty_master_crash.test:
We doesn't really need the statement.
mysql-test/suite/engines/funcs/t/rpl_flushlog_loop.test:
Just show Relay_Log_File, running status and error informations.
Use 'check_slave_is_running.inc' to verify that Slave threads are running well.
mysql-test/suite/engines/funcs/t/rpl_loaddata_s.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_log_pos.test:
Mask the explicit positions in the result file.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/engines/funcs/t/rpl_row_inexist_tbl.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
Mask the explicit binary log positions in the result file.
mysql-test/suite/engines/funcs/t/rpl_server_id1.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
Use 'check_slave_no_error.inc' to simplify the check that there is no error.
mysql-test/suite/engines/funcs/t/rpl_server_id2.test:
It doesn't really need in this test.
mysql-test/suite/engines/funcs/t/rpl_slave_status.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/engines/funcs/t/rpl_switch_stm_row_mixed.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/manual/t/rpl_replication_delay.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/parts/t/rpl_partition.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/include/rpl_mixed_ddl.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_000015.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_binlog_grant.test:
Use 'wait_for_binlog_event.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_bug33931.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_change_master.test:
This test just care whether Read_Master_Log_Pos is equal to Exec_Master_Log_Pos after 'CHANGE MASTER ..'. So 'show slave status' is removed and just check the value of Read_Master_Log_Pos and Exec_Master_Log_Pos.
mysql-test/suite/rpl/t/rpl_critical_errors.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
Mask the explicit position numbers in result file.
It is restricted running on SBR, for it want to binlog 'set @a=1' statement.
mysql-test/suite/rpl/t/rpl_empty_master_crash.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_flushlog_loop.test:
UUse 'check_slave_is_running.inc' and 'show_slave_status.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
mysql-test/suite/rpl/t/rpl_grant.test:
It doesn't need in this test.
mysql-test/suite/rpl/t/rpl_incident.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_loaddata_fatal.test:
Use 'wait_for_slave_sql_error_and_skip.inc' to wait the given sql thread error happening and then skip the event. There is no need to print the result of 'show slave stutus'.
mysql-test/suite/rpl/t/rpl_log_pos.test:
Use 'wait_for_slave_io_error.inc' to wait the given io thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_replicate_do.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_rotate_logs.test:
Use 'show_slave_status.inc' instead of 'show_slave_status2.inc'.
mysql-test/suite/rpl/t/rpl_row_basic_11bugs.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_drop.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_row_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_skip_error.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl/t/rpl_slave_load_remove_tmpfile.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and mask the explicit position number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_sp.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/suite/rpl/t/rpl_ssl.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_ssl1.test:
Use 'show_slave_status.inc' instead of 'show slave status'.
mysql-test/suite/rpl/t/rpl_stm_until.test:
Use 'check_slave_param.inc' to check whether SQL Thread stop at a right position, and use binlog position variables instead of explicit number in the 'CHANGE MASTER' statements.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
Use 'wait_for_slave_sql_error.inc' to wait the given sql thread error happening.
There is no need to print the result of 'show slave status'.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_idempotent.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test:
Mask master_log_pos and master_log_file
mysql-test/suite/rpl_ndb/t/rpl_ndb_sync.test:
Use 'check_slave_is_running.inc' instead of 'show slave status' statement.
mysql-test/suite/rpl_ndb/t/rpl_truncate_7ndb.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/alter_table-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/create-big.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/ctype_cp932_binlog_stm.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
mysql-test/t/flush_block_commit_notembedded.test:
It checks whether somethings are binlogged,
so we using 'show_binlog_event.inc' instead of 'show master status'.
mysql-test/t/multi_update.test:
It checks whether somethings are binlogged,
so we using 'wait_binlog_event.inc' instead of 'show master status'.
mysql-test/t/sp_trans_log.test:
Use 'show_binlog_events.inc' instead of 'show binlog events' statement.
