When online alter rollbacks due to MDL time out, it doesn't mark the
index online status as ONLINE_INDEX_ABORTED. Concurrent update fails
to update the secondary index while building the entry.
InnoDB should check the online status of the secondary index before
building the secondary index entry.
Reviewed-by: Marko Mäkelä
* be strict in CREATE TABLE, just like in ALTER TABLE, because
CREATE TABLE, just like ALTER TABLE, can be rolled back for any engine
* but don't auto-convert warnings into errors for engine warnings
(handler::create) - this matches ALTER TABLE behavior
* and not when creating a default record, these errors are handled
specially (and replaced with ER_INVALID_DEFAULT)
* always issue a Note when a non-unique key is truncated, because it's
not a Warning that can be converted to an Error. Before this commit
it was a Note for blobs and a Warning for all other data types.
in queries like
create view v1 as select 2 like 1 escape (3 in (select 0 union select 1));
select 2 union select * from v1;
Item_func_like::escape was left uninitialized, because
Item_in_optimizer is const_during_execution()
but not actually const_item() during execution.
It's not, because const subquery evaluation was disabled for derived.
Practically it only needs to be disabled for multi-update
that runs fix_fields() before all tables are locked.
The reason for the failure is that
thd->mdl_context.release_transactional_locks()
was called after commit & rollback even in cases where the current
transaction is still active.
For 10.2, 10.3 and 10.4 the fix is simple:
- Replace all calls to thd->mdl_context.release_transactional_locks() with
thd->release_transactional_locks(). The thd function will only call
the mdl_context function if there are no active transactional locks.
In 10.6 we will better fix where we will change the return value for
some trans_xxx() functions to indicate if transaction did close the
transaction or not. This will avoid the need of the indirect call.
Other things:
- trans_xa_commit() and trans_xa_rollback() will automatically
call release_transactional_locks() if the transaction is closed.
- We can't do that for the other functions as the caller of many of these
are doing additional work (like close_thread_tables) before calling
release_transactional_locks().
- Added missing abort_result_set() and missing DBUG_RETURN in
select_create::send_eof()
- Fixed wrong indentation in injector::transaction::commit()
Patch removes dict_index_t::stats_latch. Table/index statistics now
protected with dict_sys->mutex. That way statistics computation can
happen in parallel in several threads and dict_sys->mutex will be locked
only for a short period of time.
This patch is a joint work with Marko Mäkelä
dict_index_t:🔒 make mutable which allows to pass const pointer
when only lock is touched in an object
btr_height_get()
btr_get_size(): make index argument const for better type safety
btr_estimate_number_of_different_key_vals(): now returns computed values
instead of setting fields in dict_index_t directly
remove everything related to dict_index_t::stats_latch
dict_stats_index_set_n_diff(): now returns computed values instead
of setting fields in dict_index_t directly
dict_stats_analyze_index(): now returns computed values instead
of setting fields in dict_index_t directly
Reviewed by: Marko Mäkelä
Let us introduce a dummy variable innodb_max_purge_lag_wait
for waiting that the InnoDB history list length is below
the user-specified limit. Specifically,
SET GLOBAL innodb_max_purge_lag_wait=0;
should wait for all history to be purged. This could be useful
when upgrading from an older version to MariaDB 10.3 or later,
to avoid hitting MDEV-15912.
Note: the history cannot be purged if there exist transactions
that may see old versions.
Reviewed by: Vladislav Vaintroub
fix printing precedence for BETWEEN, LIKE/ESCAPE, REGEXP, IN
don't use precedence for printing CASE/WHEN/THEN/ELSE/END
fix parsing precedence of BETWEEN, LIKE/ESCAPE, REGEXP, IN
support predicate arguments for IN, BETWEEN, SOUNDS LIKE, LIKE/ESCAPE,
REGEXP
use %nonassoc for unary operators
fix parsing of IS TRUE/FALSE/UNKNOWN/NULL
remove parser_precedence test as superseded by the precedence test
Marking of deletion of row in fts index happens twice in
self-referential foreign key relation. So while performing
referential checks of foreign key, InnoDB can avoid updating
of fts index if the foreign key has self-referential relationship.
Reviewed-by: Marko Mäkelä
This regression for debug builds was introduced by
MDEV-23101 (commit 224c950462).
Due to MDEV-16664, the parameter
innodb_lock_schedule_algorithm=VATS
is not enabled by default.
The purpose of the added assertions was to enforce the invariant that
Galera replication cannot be enabled together with VATS due to MDEV-12837.
However, upon closer inspection, it is obvious that the variable 'lock'
may be assigned to the null pointer if no match is found in the
previous->hash list.
lock_grant_and_move_on_page(), lock_grant_and_move_on_rec():
Assert !lock->trx->is_wsrep() only after ensuring that lock
is not a null pointer.
The setting innodb_lock_schedule_algorithm=VATS that was introduced
in MDEV-11039 (commit 021212b525)
causes conflicting exclusive locks to be incorrectly granted to
two transactions. Specifically, in lock_rec_insert_by_trx_age()
the predicate !lock_rec_has_to_wait_in_queue(in_lock) would hold even
though an active transaction is already holding an exclusive lock.
This was observed between two DELETE of the same clustered index record.
The HASH_DELETE invocation in lock_rec_enqueue_waiting() may be related.
Due to lack of progress in diagnosing the problem, we will deprecate the
option and issue a warning that using it may corrupt data. The unsafe
option was enabled between
commit 0c15d1a6ff (MariaDB 10.2.3)
and the parent of
commit 1cc1d0429d (MariaDB 10.2.17, 10.3.9).
The statement ALTER TABLE...DISCARD TABLESPACE is problematic,
because its designed purpose is to break the referential integrity
of the data dictionary and make a table point to nowhere.
ha_innobase::commit_inplace_alter_table(): Check whether the
table has been discarded. (This is a bit late to check it, right
before committing the change.) Previously, we performed this check
only in a specific branch of the function commit_set_autoinc().
Note: We intentionally allow non-rebuilding ALTER TABLE even if
the tablespace has been discarded, to remain compatible with MySQL.
(See the various tests with "wl5522" in the name, such as
innodb.innodb-wl5522.)
The test case would crash starting with 10.3 only, but it does not hurt
to minimize the code and test difference between 10.2 and 10.3.
After DISCARD TABLESPACE, the tablespace of a table will no longer
exist, and dict_get_and_save_data_dir_path() would invoke
dict_get_first_path() to read an entry from SYS_DATAFILES.
For some reason, DISCARD TABLESPACE would not to remove the entry
from there.
dict_get_and_save_data_dir_path(): If the tablespace has been
discarded, do not bother trying to read the name.
Side note: The tables SYS_TABLESPACES and SYS_DATAFILES are
redundant and subject to removal in MDEV-22343.
fts_drop_orphaned_tables() takes long time to remove the orphaned
FTS tables. In order to reduce the time, do the following:
- Traverse fil_system.space_list and construct a set of
table_id,index_id of all FTS_*.ibd tablespaces.
- Traverse the sys_indexes table and ignore the entry
from the above collection if it exist.
- Existing elements in the collection can be considered as
orphaned fts tables. construct the table name from
(table_id,index_id) and invoke fts_drop_tables().
- Removed DICT_TF2_FTS_AUX_HEX_NAME flag usage from upgrade.
- is_aux_table() in dict_table_t to check whether the given name
is fts auxiliary table
fts_space_set_t is a structure to store set of parent table id
and index id
- Remove unused FTS function in fts0fts.cc
- Remove the fulltext index in row_format_redundant test case.
Because it deals with the condition that SYS_TABLES does have
corrupted entry and valid entry exist in SYS_INDEXES.
dict_foreign_qualify_index(): Reject corrupted or garbage indexes.
For index stubs that are created on virtual columns, no
dict_field_t::col would be assign. Instead, the entire table
definition would be reloaded on a successful operation.
During insertion of clustered index, InnoDB does the check for foreign key
constraints. Problem is that it uses the clustered index entry to search
indexes of referenced tables and it could lead to unexpected result
when there is no foreign index.
Solution:
========
Rebuild the tuple based on foreign column names before searching it
on reference index when there is no foreign index.
Shutdown of mtr tests may be too impatient, esp on CI environment where
10 seconds of `arg` of `shutdown_server arg` may not be enough for the clean
shutdown to complete.
This is fixed to remove explicit non-zero timeout argument to
`shutdown_server` from all mtr tests. mysqltest computes 60 seconds default
value for the timeout for the argless `shutdown_server` command.
This policy is additionally ensured with a compile time assert.
Regretfully, the parameter innodb_log_checksums was introduced
in MySQL 5.7.9 (the first GA release of that series) by
mysql/mysql-server@af0acedd88
which partly replaced a parameter that had been introduced in 5.7.8
mysql/mysql-server@22ba38218e
as innodb_log_checksum_algorithm.
Given that the CRC-32C operations are accelerated on many processor
implementations (AMD64 with SSE4.2; since MDEV-22669 also on IA-32
with SSE4.2, POWER 8 and later, ARMv8 with some extensions)
and by lookup tables when only generic SISD instructions are available,
there should be no valid reason to disable checksums.
In MariaDB 10.5.2, as a preparation for MDEV-12353, MDEV-19543 deprecated
and ignored the parameter innodb_log_checksums altogether. This should
imply that after a clean shutdown with innodb_log_checksums=OFF one
cannot upgrade to MariaDB Server 10.5 at all.
Due to these problems, let us deprecate the parameter innodb_log_checksums
and honor it only during server startup.
The command SET GLOBAL innodb_log_checksums will always set the
parameter to ON.
Problem:
=======
InnoDB drops the column which has foreign key relations on it. So it
tries to load the foreign key during rename process of copy algorithm
even though the foreign_key_check is disabled.
Solution:
========
During alter copy algorithm, InnoDB ignores the error while loading
the foreign key constraint if foreign key check is disabled. It
should throw the warning about failure of the foreign key constraint
when foreign key check is disabled.
InnoDB only reserves 13 bits for the heap number in the record header,
limiting the heap number to be at most 8191. But, when using
innodb_page_size=64k and secondary index records of 7 bytes each,
it is possible to exceed the maximum heap number.
btr_cur_optimistic_insert(): Let the operation fail if the
maximum number of records would be exceeded.
page_mem_alloc_heap(): Move to the same compilation unit with the
only caller, and let the operation fail if the maximum heap number
has been allocated already.
innobase_pk_order_preserved(): Treat an added AUTO_INCREMENT
column in the same way as an added existing column.
In either case, the column values are not guaranteed to
be constant, and thus the ordering may change if such a column
is added before any existing PRIMARY KEY columns.
prepare_inplace_alter_table_dict(): Initialize
dict_table_t::persistent_autoinc before invoking
innobase_pk_order_preserved().
row_vers_impl_x_locked_low(): clust_offsets may point to memory
that is allocated by mem_heap_alloc() and may have been freed.
For initializing clust_offsets, try to use the stack-allocated
buffer instead of a pointer that may point to freed memory.
This fixes a regression that was introduced in
commit f0aa073f2b (MDEV-20950).
The srv_monitor_event and the srv_monitor_thread would not be
created when InnoDB is in read-only mode. Yet, some code would
unconditionally invoke os_event_set(srv_monitor_event).
The test case that was added for MDEV-21217
(commit b68f1d847f)
should have only two possible outcomes for the locking SELECT statement:
(1) The statement is blocked, and the test will eventually fail
with a lock wait timeout. This is what I observed when the
code fix for MDEV-21217 was missing.
(2) The lock conflict will ensure that the statement will execute
after the rollback has completed, and an empty table will be observed.
This is the expected outcome with the recovery fix.
What occasionally happens (in some of our CI environments only, so far)
is that the locking SELECT will return all 1,000 rows of the table that
had been inserted by the transaction that was never supposed to be
committed. One possibility is that the transaction was unexpectedly
committed when the server was killed.
Let us disable the test until the reason of the failure has been
determined and addressed.
The background drop table queue in InnoDB is a work-around for
cases where the SQL layer is requesting DDL on tables on which
transactional locks exist.
One such case are XA transactions. Our test case exploits the
fact that the recovery of XA PREPARE transactions will
only resurrect InnoDB table locks, but not MDL that should
block any concurrent DDL.
srv_shutdown_t: Introduce the srv_shutdown_state=SRV_SHUTDOWN_INITIATED
for the initial part of shutdown, to wait for the background drop
table queue to be emptied.
srv_shutdown_bg_undo_sources(): Assign
srv_shutdown_state=SRV_SHUTDOWN_INITIATED
before waiting for the background drop table queue to be emptied.
row_drop_tables_for_mysql_in_background(): On slow shutdown, if
no active transactions exist (excluding ones that are in
XA PREPARE state), skip any tables on which locks exist.
row_drop_table_for_mysql(): Do not unnecessarily attempt to
drop InnoDB persistent statistics for tables that have
already been added to the background drop table queue.
row_mysql_close(): Relax an assertion, and free all memory
even if innodb_force_recovery=2 would prevent the background
drop table queue from being emptied.
MDEV-22073 MSAN use-of-uninitialized-value in
collect_statistics_for_table()
Other things:
innodb.analyze_table was changed to mainly test statistic
collection. Was discussed with Marko.
only MDL-prelock but do not open FK child tables for read-only (RESTRICT)
FK actions.
Tables still needs to be opened for CASCADE actions, see 9180e8666b
FOREIGN_KEY_CHECKS is disabled
- Referenced index can be null While renaming the referenced column name.
In that case, rename the referenced column name in dict_foreign_t and
find the equivalent referenced index.
This is a way do disable DBUG_ENTER()/DBUG_EXIT() stuff which is
needed to dbug trace. Those who doesn't need it may avoid tests
slowdown with -DWITH_DBUG_TRACE=OFF
dbug/tests.c: add define which is neede always in this test
innodb.log_file_name_debug.test: do not depend on DBUG trace stuff
in test
Benchmark results: each test eats less CPU and you can have more
parallel jobs in MTR.
patched:
./mtr -mem -par=8 -suite=innodb 185.34s user 86.85s system 133% cpu 3:23.27 total
./mtr -mem -par=8 -suite=main 80.96s user 36.01s system 182% cpu 1:04.07 total
main.select [ pass ] 1660
main.select [ pass ] 1513
main.select [ pass ] 1543
main.select [ pass ] 1660
main.select [ pass ] 1521
main.select [ pass ] 1511
main.select [ pass ] 1508
main.select [ pass ] 1520
main.select [ pass ] 1514
main.select [ pass ] 1522
vanilla:
./mtr -mem -par=8 -suite=innodb 203.61s user 92.16s system 140% cpu 3:30.16 total
./mtr -mem -par=8 -suite=main 94.11s user 35.51s system 206% cpu 1:02.69 total
main.select [ pass ] 2032
main.select [ pass ] 2017
main.select [ pass ] 2040
main.select [ pass ] 2183
main.select [ pass ] 2253
main.select [ pass ] 2075
main.select [ pass ] 2109
main.select [ pass ] 2080
main.select [ pass ] 2098
main.select [ pass ] 2114
Several MYSQL_SYSVAR_STR parameters that employ both a validate
function callback fail to copy the string for saving the
validated value. The affected variables include the following:
innodb_ft_aux_table
innodb_ft_server_stopword_table
innodb_ft_user_stopword_table
innodb_buffer_pool_filename
The test case is an enhanced version of
mysql/mysql-server@0b0c30641f
and the code changes are inspired by their fixes.
We are also importing and adjusting the test innodb_fts.stopword
to get coverage for the variable innodb_ft_user_stopword_table.
buf_dump(), buf_load(): Protect srv_buf_dump_filename with
LOCK_global_system_variables.
fts_load_user_stopword(): Minor cleanup
fts_load_stopword(): Remove the parameter global_stopword_table.
innobase_fts_load_stopword(): Protect innodb_server_stopword_table
against concurrent SET GLOBAL.
