mysql_prepare_alter_table(): Alter table should check whether
foreign key exists when it expected to exists and
report the error in early stage
dict_foreign_parse_drop_constraints(): Don't throw error if the
foreign key constraints doesn't exist when if exists is given
in the statement.
- Add selected tables as shared keys for CTAS certification
- Set proper security context on the replayer thread
- Disallow CTAS command retry
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The server doesn't use the enforced storage engine in ALTER TABLE
without ENGINE clause to avoid an unwanted engine change.
However, the server tries to use the enforced engine in CREATE
INDEX. As a result, the false positive error is raised. The server
should not apply the enforced engine in CREATE INDEX too.
The assert's reason was in missed FL_DDL flagging of CREATE-or-REPLACE
Query event.
MDEV-27365 fixes covered only the non-pre-existing table execution branch so
did not see a possibility of implicit commit in
the middle of execution in a rollback branch when the being CREATEd
sequence table is actually replaced.
The pre-existing table branch cleared the DDL modification
flag so the query lost FL_DDL in binlog and its parallel execution
on slave may have ended up with the assert to indicate the query
is raced by a following in binlog order event.
Fixed with applying the MDEV-27365 pattern.
An mtr test is added to cover the rollback situation.
The description test [ pass ] with a generous number of mtr parallel
reties.
Problem was that total order isolation (TOI) is started before
we know sequence implementing storage engine. This led to
situation where table implementing persistent storate
for sequence in case of MyISAM was created on applier causing
errors later in test execution.
Therefore, in both CREATE SEQUENCE and ALTER TABLE to implementing
persistent storage we need to check implementing storage engine
after open_tables and this check must be done in both master
and applier, because if implementing storage engine is MyISAM
it does not support rollback.
Added tests to make sure that if sequence implementing storage
engine is MyISAM or we try to alter it to MyISAM user gets error
and changes are not replicated.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
In MDEV-31086, SET FOREIGN_KEY_CHECKS=0 cannot bypass checks that
make column types of foreign keys incompatible. An unfortunate
consequence is that adding an AUTO_INCREMENT is considered
incompatible in Field_{num,decimal}::is_equal and for the purpose
of FK checks this isn't relevant.
innodb.foreign_key - pragmaticly left wait_until_count_sessions.inc at
end of test to match the second line of test.
Reporter: horrockss@github - https://github.com/MariaDB/mariadb-docker/issues/528
Co-Author: Marko Mäkelä <marko.makela@mariadb.com>
Reviewer: Nikita Malyavin
For the future reader this was attempted:
Removing AUTO_INCREMENT checks from Field_{num,decimal}::is_equals
failed in the following locations (noted for future fixing):
* MyISAM and Aria (not InnoDB) don't adjust AUTO_INCREMENT next number
correctly, hence added a test to main.auto_increment to catch
the next person that attempts this fix.
* InnoDB must perform an ALGORITHM=COPY to populate NULL values of
an original table (MDEV-19190 mtr test period.copy), this requires
ALTER_STORED_COLUMN_TYPE to be set in fill_alter_inplace_info
which doesn't get hit because field->is_equal is true.
* InnoDB must not perform the change inplace (below patch)
* innodb.innodb-alter-timestamp main.partition_innodb test would
also need futher investigation.
InnoDB ha_innobase::check_if_supported_inplace_alter to support the
removal of Field_{num,decimal}::is_equal AUTO_INCREMENT checks would need the following change
diff --git a/storage/innobase/handler/handler0alter.cc b/storage/innobase/handler/handler0alter.cc
index a5ccb1957f3..9d778e2d39a 100644
--- a/storage/innobase/handler/handler0alter.cc
+++ b/storage/innobase/handler/handler0alter.cc
@@ -2455,10 +2455,15 @@ ha_innobase::check_if_supported_inplace_alter(
/* An AUTO_INCREMENT attribute can only
be added to an existing column by ALGORITHM=COPY,
but we can remove the attribute. */
- ut_ad((MTYP_TYPENR((*af)->unireg_check)
- != Field::NEXT_NUMBER)
- || (MTYP_TYPENR(f->unireg_check)
- == Field::NEXT_NUMBER));
+ if ((MTYP_TYPENR((*af)->unireg_check)
+ == Field::NEXT_NUMBER)
+ && (MTYP_TYPENR(f->unireg_check)
+ != Field::NEXT_NUMBER))
+ {
+ ha_alter_info->unsupported_reason = my_get_err_msg(
+ ER_ALTER_OPERATION_NOT_SUPPORTED_REASON_AUTOINC);
+ DBUG_RETURN(HA_ALTER_INPLACE_NOT_SUPPORTED);
+ }
With this change the main.auto_increment test for bug #14573, under
innodb, will pass without the 2 --error ER_DUP_ENTRY entries.
The function header comment was updated to reflect the MDEV-31086
changes.
While cleaning up a failed CREATE TABLE LIKE <sequence>, `mysql_rm_table_no_locks`
erroneously attempted to remove all tables involved in the query, including
the source table (sequence).
Fix to temporarily modify `table_list` to ensure that only the intended
table is removed during the cleanup.
At the moment we cannot support
wsrep_forced_binlog_format=[MIXED|STATEMENT]
during CREATE TABLE AS SELECT.
Statement will use ROW instead and give
a warning.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
make TRANSACTIONAL table option behave similar to other engine-defined
table options. If the engine doesn't suport it:
* if specified expicitly in CREATE or ALTER - it's ER_UNKNOWN_OPTION
* an error or a warning depending on sql_mode IGNORE_BAD_TABLE_OPTIONS
* in ALTER TABLE from the engine that suppors it to the engine that
doesn't - silently preserved (no warning)
* it is commented out in SHOW CREATE unless IGNORE_BAD_TABLE_OPTIONS
* invoke check_expression() for all vcol_info's in
mysql_prepare_create_table() to check for FK CASCADE
* also check for SET NULL and SET DEFAULT
* to check against existing FKs when a vcol is added in ALTER TABLE,
old FKs must be added to the new_key_list just like other indexes are
* check columns recursively, if vcol1 references vcol2,
flags of vcol2 must be taken into account
* remove check_table_name_processor(), put that logic under
check_vcol_func_processor() to avoid walking the tree twice
mark old keys in the ALTER TABLE with the `old` flag, not with
the `key_create_info.check_for_duplicate_indexes`.
This allows to mark old foreign keys too.
differently react to SQL_MODE => unusable SHOW CREATE
Use abort_on_warning dependent on strict mode over create new table
like it is done for copy data and inplace alter.
- When foreign_key_check is disabled, allowing to modify the
column which is part of foreign key constraint can lead to
refusal of TRUNCATE TABLE, OPTIMIZE TABLE later. So it make
sense to block the column modify operation when foreign key
is involved irrespective of foreign_key_check variable.
Correct way to modify the charset of the column when fk is involved:
SET foreign_key_checks=OFF;
ALTER TABLE child DROP FOREIGN KEY fk, MODIFY m VARCHAR(200) CHARSET utf8mb4;
ALTER TABLE parent MODIFY m VARCHAR(200) CHARSET utf8mb4;
ALTER TABLE child ADD CONSTRAINT FOREIGN KEY (m) REFERENCES PARENT(m);
SET foreign_key_checks=ON;
fk_check_column_changes(): Remove the FOREIGN_KEY_CHECKS while
checking the column change for foreign key constraint. This
is the partial revert of commit 5f1f2fc0e4
and it changes the behaviour of copy alter algorithm
ha_innobase::prepare_inplace_alter_table(): Find the modified
column and check whether it is part of existing and newly
added foreign key constraint.
Problem for Galera is the fact that sequences are not really
transactional. Sequence operation is committed immediately
in sql_sequence.cd and later Galera could find out that
we have changes but actual statement is not there anymore.
Therefore, we must make some restrictions what kind
of sequences Galera can support.
(1) Galera cluster supports only sequences implemented
by InnoDB storage engine. This is because Galera replication
supports currently only InnoDB.
(2) We do not allow LOCK TABLE on sequence object and
we do not allow sequence creation under LOCK TABLE, instead
lock is released and we issue warning.
(3) We allow sequences with NOCACHE definition or with
INCREMEMENT BY 0 CACHE=n definition. This makes sure that
sequence values are unique accross Galera cluster.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Works like vers_force but forces trx_id-based system-versioned tables
if the storage supports it (currently InnoDB-only). Otherwise creates
timestamp-based system-versioned table.
mysql_discard_or_import_tablespace(): On successful
ALTER TABLE...DISCARD TABLESPACE, evict the table handle from the
table definition cache, so that ha_innobase::close() will be invoked,
like InnoDB expects to be the case. This will avoid an assertion failure
ut_a(table->get_ref_count() == 0) during IMPORT TABLESPACE.
ha_innobase::open(): Do not issue any ER_TABLESPACE_DISCARDED warning.
Member functions for DML will do that.
ha_innobase::truncate(), ha_innobase::check_if_supported_inplace_alter():
Issue ER_TABLESPACE_DISCARDED warnings, to compensate for the removal of
the warning in ha_innobase::open().
row_quiesce_write_indexes(): Only write information about committed
indexes. The ALTER TABLE t NOWAIT ADD INDEX(c) in the nondeterministic
test case will most of the time fail due to a metadata lock (MDL) timeout
and leave behind an uncommitted index.
Reviewed by: Sergei Golubchik
Like in MDEV-16110 we must release items allocated on thd->mem_root by
reopening the table.
MDEV-16290 relocated MDEV-16110 fix in 10.5 so it works for MDEV-28576
as well. 10.3 without MDEV-16290 now duplicates this fix.
Fix the regression introduced in
dfb41fddf6.
In the restructure of mysql_rm_table_no_locks the early condition
of !frm_error that enabled non_tmp_table_deleted, and hence the
query cache invalidation, was removed.
The query_cache_invalidate1(thd, dbnorm) called after
mysql_rm_table_no_locks depends on the query cache removal
(for unexamined reasons).
Under DROP DATABASE, in mysql_rm_table_no_locks, dont_log_query
is true preventing the late setting of non_tmp_table_deleted
(which retained one of its purposes as a replication deletion
of temporary tables, but not query cache invalidation).
The non_temp_tables_count however can still be used to invalidate
the query cache.
The ALTER related code cannot do at the same time both:
- modify partitions
- change column data types
Explicit changing of a column data type together with a partition change is
prohibited by the parter, so this is not allowed and returns a syntax error:
ALTER TABLE t MODIFY ts BIGINT, DROP PARTITION p1;
This fix additionally disables implicit data type upgrade
(e.g. from "MariaDB 5.3 TIME" to "MySQL 5.6 TIME", or the other way
around according to the current mysql56_temporal_format) in case of
an ALTER modifying partitions, e.g.:
ALTER TABLE t DROP PARTITION p1;
In such commands now only the partition change happens, while
the data types stay unchanged.
One can additionally run:
ALTER TABLE t FORCE;
either before or after the ALTER modifying partitions to
upgrade data types according to mysql56_temporal_format.
10.5 part: test cases and comments.
The code is in the merge commit 74fe1c44aa
When f.ex. table is partitioned by HASH(a) and we rename column `a' to
`b' partitioning filter stays unchanged: HASH(a). That's the wrong
behavior.
The patch updates partitioning filter in accordance to the new columns
names. That includes partition/subpartition expression and
partition/subpartition field list.
When f.ex. table is partitioned by HASH(a) and we rename column `a' to
`b' partitioning filter stays unchanged: HASH(a). That's the wrong
behavior.
The patch updates partitioning filter in accordance to the new columns
names. That includes partition/subpartition expression and
partition/subpartition field list.
