Also in the startup, lets not "Error" on attempting to install a
mysql.plugin that is already there. We use the 'if_not_exists'
parameter to true to downgrade this to a "Note".
Also corrects: MDEV-32041 "plugin already loaded" should be a Warning, not an Error
Other things:
- Added DBUG_EXECUTE_IF("print_allocated_thread_memory") at end of query
to easier find not freed memory allocated by THD
- Removed free_root() from plugin_init() that did nothing.
We introduce simple plugin dependency. A plugin init function may
return HA_ERR_RETRY_INIT. If this happens during server startup when
the server is trying to initialise all plugins, the failed plugins
will be retried, until no more plugins succeed in initialisation or
want to be retried.
This will fix spider init bugs which is caused in part by its
dependency on Aria for initialisation.
The reason we need a new return code, instead of treating every
failure as a request for retry, is that it may be impossible to clean
up after a failed plugin initialisation. Take InnoDB for example, it
has a global variable `buf_page_cleaner_is_active`, which may not
satisfy an assertion during a second initialisation try, probably
because InnoDB does not expect the initialisation to be called
twice.
plugin_vars_free_values() was walking plugin sysvars and thus
did not free memory of plugin PLUGIN_VAR_NOSYSVAR vars.
* change it to walk all plugin vars
* add the pluginname_ prefix to NOSYSVARS var names too,
so that plugin_vars_free_values() would be able to find their
bookmarks
Making changes to wsrep_mysqld.h causes large parts of server code to
be recompiled. The reason is that wsrep_mysqld.h is included by
sql_class.h, even tough very little of wsrep_mysqld.h is needed in
sql_class.h. This commit introduces a new header file, wsrep_on.h,
which is meant to be included from sql_class.h, and contains only
macros and variable declarations used to determine whether wsrep is
enabled.
Also, header wsrep.h should only contain definitions that are also
used outside of sql/. Therefore, move WSREP_TO_ISOLATION* and
WSREP_SYNC_WAIT macros to wsrep_mysqld.h.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
look for an installed plugin with the same name _and the same type_
(in case there are many plugins with the same name and different type,
which is, technically, possible for built-in plugins).
The sys_var class has the deprecation_substitute member to mark the
deprecated variables. As it's set, the server produces warnings when
these variables are used. However, the plugin has no means to utilize
that functionality.
So, the PLUGIN_VAR_DEPRECATED flag is introduced to set the
deprecation_substitute with the empty string. A non-empty string can
make the warning more informative, but there's no nice way seen to
specify it, and not that needed at the moment.
This is important since Sys_var_typelib and its descendants return
pointers to constant symbols from *_value_ptr, which are situated in
write-protected-memory.
* functions const-qualified:
- value_ptr
- session_value_ptr
- global_value_ptr
- default_value_ptr
- Sys_var_vers_asof::value_ptr
- other minor private ones
* remove C-style typecasts when it discards qualifiers
One should not change the program arguments!
This change also reduces warnings from the icc compiler.
Almost all changes are just syntax changes (adding const to
'get_one_option function' declarations).
Other changes:
- Added a few cast of 'argument' from 'const char*' to 'char *'. This
was mainly in calls to 'external' functions we don't have control of.
- Ensure that all reset of 'password command line argument' are similar.
(In almost all cases it was just adding a comment and a cast)
- In mysqlbinlog.cc and mysqld.cc there was a few cases that changed
the command line argument. These places where changed to instead allocate
the option in a MEM_ROOT to avoid changing the argument. Some of this
code was changed to ensure that different programs did parsing the
same way. Added a test case for the changes in mysqlbinlog.cc
- Changed a few variables that took their value from command line options
from 'char *' to 'const char *'.
mutex was already locked upon startup with server_audit and orphan
records in mysql.plugin.
Preaquire auditing plugins before LOCK_plugin to awoid double locking.
MDEV-21398 Deadlock (server hang) or assertion failure in
Diagnostics_area::set_error_status upon ALTER under lock
This failure could only happen if one locked the same table
multiple times and then did an ALTER TABLE on the table.
Major change is to change all instances of
table->m_needs_reopen= true;
to
table->mark_table_for_reopen();
The main fix for the problem was to ensure that we mark all
instances of the table in the locked_table_list and when we
reopen the tables, we first close all tables before reopening
and locking them.
Other things:
- Don't call thd->locked_tables_list.reopen_tables if there
are no tables marked for reopen. (performance)
Remove special treatment for Aria.
Add a test with --help and mysql.plugin table being InnoDB
MyISAM is still treated specially, as we need to be able
to initialize global_system_variables.table_plugin reliably
Changes:
- Initalize Aria early to allow it to load mysql.plugin table with --help
- Don't print 'aborting' when doing --help
- Don't write 'loose' error messages on log_warning < 2 (2 is default)
- Don't write warnings about disabled plugings when doing --help
- Don't write aria_log_control or aria log files when doing --help
- When using --help, open all Aria tables in read only mode (safety)
- If aria_init() fails, do a cleanup(). (Frees used memory)
- If aria_log_control is locked with --help, then don't wait 30 seconds
but instead return at once without initialzing Aria plugin.
MDEV-21605 Clean up and speed up interfaces for binary row logging
MDEV-21617 Bug fix for previous version of this code
The intention is to have as few 'if' as possible in ha_write() and
related functions. This is done by pre-calculating once per statement the
row_logging state for all tables.
Benefits are simpler and faster code both when binary logging is disabled
and when it's enabled.
Changes:
- Added handler->row_logging to make it easy to check it table should be
row logged. This also made it easier to disabling row logging for system,
internal and temporary tables.
- The tables row_logging capabilities are checked once per "statements
that updates tables" in THD::binlog_prepare_for_row_logging() which
is called when needed from THD::decide_logging_format().
- Removed most usage of tmp_disable_binlog(), reenable_binlog() and
temporary saving and setting of thd->variables.option_bits.
- Moved checks that can't change during a statement from
check_table_binlog_row_based() to check_table_binlog_row_based_internal()
- Removed flag row_already_logged (used by sequence engine)
- Moved binlog_log_row() to a handler::
- Moved write_locked_table_maps() to THD::binlog_write_table_maps() as
most other related binlog functions are in THD.
- Removed binlog_write_table_map() and binlog_log_row_internal() as
they are now obsolete as 'has_transactions()' is pre-calculated in
prepare_for_row_logging().
- Remove 'is_transactional' argument from binlog_write_table_map() as this
can now be read from handler.
- Changed order of 'if's in handler::external_lock() and wsrep_mysqld.h
to first evaluate fast and likely cases before more complex ones.
- Added error checking in ha_write_row() and related functions if
binlog_log_row() failed.
- Don't clear check_table_binlog_row_based_result in
clear_cached_table_binlog_row_based_flag() as it's not needed.
- THD::clear_binlog_table_maps() has been replaced with
THD::reset_binlog_for_next_statement()
- Added 'MYSQL_OPEN_IGNORE_LOGGING_FORMAT' flag to open_and_lock_tables()
to avoid calculating of binary log format for internal opens. This flag
is also used to avoid reading statistics tables for internal tables.
- Added OPTION_BINLOG_LOG_OFF as a simple way to turn of binlog temporary
for create (instead of using THD::sql_log_bin_off.
- Removed flag THD::sql_log_bin_off (not needed anymore)
- Speed up THD::decide_logging_format() by remembering if blackhole engine
is used and avoid a loop over all tables if it's not used
(the common case).
- THD::decide_logging_format() is not called anymore if no tables are used
for the statement. This will speed up pure stored procedure code with
about 5%+ according to some simple tests.
- We now get annotated events on slave if a CREATE ... SELECT statement
is transformed on the slave from statement to row logging.
- In the original code, the master could come into a state where row
logging is enforced for all future events if statement could be used.
This is now partly fixed.
Other changes:
- Ensure that all tables used by a statement has query_id set.
- Had to restore the row_logging flag for not used tables in
THD::binlog_write_table_maps (not normal scenario)
- Removed injector::transaction::use_table(server_id_type sid, table tbl)
as it's not used.
- Cleaned up set_slave_thread_options()
- Some more DBUG_ENTER/DBUG_RETURN, code comments and minor indentation
changes.
- Ensure we only call THD::decide_logging_format_low() once in
mysql_insert() (inefficiency).
- Don't annotate INSERT DELAYED
- Removed zeroing pos_in_table_list in THD::open_temporary_table() as it's
already 0
