Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
The original code comes, as far as I know, from Google (Mark Callaghan's team) with additional work from Percona, Ourdelta and Weldon Whipple.
This code provides the same functionallity, but with a lot of changes to make it faster and better fit the MariaDB infrastucture.
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_sent, Rows_read
Added new variable / startup option 'userstat' to control if user statistics should be enabled or not
Added my_getcputime(); Returns cpu time used by this thread.
New FLUSH commands:
- FLUSH SLOW QUERY LOG
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
New SHOW commands:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
New Information schemas:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Added support for all new flush commands to mysqladmin
Added handler::ha_... wrappers for all handler read calls to do statistics counting
- Changed all code to use new ha_... calls
- Count number of read rows, changed rows and rows read trough an index
Added counting of number of bytes sent to binary log (status variable Binlog_bytes_written)
Added counting of access denied errors (status variable Access_denied_erors)
Bugs fixed:
- Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
- CLOCK_GETTIME was not propely working on Linuxm
client/mysqladmin.cc:
Added support for all new flush commmands and some common combinations:
flush-slow-log
flush-table-statistics
flush-index-statistics
flush-user-statistics
flush-client-statistics
flush-all-status
flush-all-statistics
configure.in:
Added checking if clock_gettime needs the librt.
(Fixes Bug #37639 clock_gettime is never used/enabled in Linux/Unix)
include/my_sys.h:
Added my_getcputime()
include/mysql_com.h:
Added LIST_PROCESS_HOST_LEN & new REFRESH target defines
mysql-test/r/information_schema.result:
New information schema tables added
mysql-test/r/information_schema_all_engines.result:
New information schema tables added
mysql-test/r/information_schema_db.result:
New information schema tables added
mysql-test/r/log_slow.result:
Added testing that flosh slow query logs is accepted
mysql-test/r/status_user.result:
Basic testing of user, client, table and index statistics
mysql-test/t/log_slow.test:
Added testing that flosh slow query logs is accepted
mysql-test/t/status_user-master.opt:
Ensure that we get a fresh restart before running status_user.test
mysql-test/t/status_user.test:
Basic testing of user, client, table and index statistics
mysys/my_getsystime.c:
Added my_getcputime()
Returns cpu time used by this thread.
sql/authors.h:
Updated authors to have core and original MySQL developers first.
sql/event_data_objects.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/event_db_repository.cc:
Changed to use new ha_... calls
sql/filesort.cc:
Changed to use new ha_... calls
sql/ha_partition.cc:
Changed to use new ha_... calls
Fixed comment syntax
sql/handler.cc:
Changed to use new ha_... calls
Reset table statistics
Added code to update global table and index status
Added counting of rows changed
sql/handler.h:
Added table and index statistics variables
Added function reset_statistics()
Added handler::ha_... wrappers for all handler read calls to do statistics counting
Protected all normal read calls to ensure we use the new calls in the server.
Made ha_partition a friend class so that partition code can call the old read functions
sql/item_subselect.cc:
Changed to use new ha_... calls
sql/lex.h:
Added keywords for new information schema tables and flush commands
sql/log.cc:
Added flush_slow_log()
Added counting of number of bytes sent to binary log
Removed not needed test of thd (It's used before, so it's safe to use)
Added THD object to MYSQL_BIN_LOG::write_cache() to simplify statistics counting
sql/log.h:
Added new parameter to write_cache()
Added flush_slow_log() functions.
sql/log_event.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/log_event_old.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/mysql_priv.h:
Updated call to mysql_reset_thd_for_next_command()
Added new statistics functions and variables needed by these.
sql/mysqld.cc:
Added new statistics variables and structures to handle these
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_set, Rows_read
Added new option 'userstat' to control if user statistics should be enabled or not
sql/opt_range.cc:
Changed to use new ha_... calls
sql/opt_range.h:
Changed to use new ha_... calls
sql/opt_sum.cc:
Changed to use new ha_... calls
sql/records.cc:
Changed to use new ha_... calls
sql/set_var.cc:
Added variable 'userstat'
sql/sp.cc:
Changed to use new ha_... calls
sql/sql_acl.cc:
Changed to use new ha_... calls
Added counting of access_denied_errors
sql/sql_base.cc:
Added call to statistics functions
sql/sql_class.cc:
Added usage of org_status_var, to store status variables at start of command
Added functions THD::update_stats(), THD::update_all_stats()
Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
sql/sql_class.h:
Added new status variables to status_var
Moved variables that was not ulong in status_var last.
Added variables to THD for storing temporary values during statistics counting
sql/sql_connect.cc:
Variables and functions to calculate user and client statistics
Added counting of access_denied_errors and lost_connections
sql/sql_cursor.cc:
Changed to use new ha_... calls
sql/sql_handler.cc:
Changed to use new ha_... calls
sql/sql_help.cc:
Changed to use new ha_... calls
sql/sql_insert.cc:
Changed to use new ha_... calls
sql/sql_lex.h:
Added SQLCOM_SHOW_USER_STATS, SQLCOM_SHOW_TABLE_STATS, SQLCOM_SHOW_INDEX_STATS, SQLCOM_SHOW_CLIENT_STATS
sql/sql_parse.cc:
Added handling of:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
Added handling of new FLUSH commands:
- FLUSH SLOW QUERY LOGS
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
Added THD parameter to mysql_reset_thd_for_next_command()
Added initialization and calls to user statistics functions
Added increment of statistics variables empty_queries, rows_sent and access_denied_errors.
Added counting of cpu time per query
sql/sql_plugin.cc:
Changed to use new ha_... calls
sql/sql_prepare.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/sql_select.cc:
Changed to use new ha_... calls
Indentation changes
sql/sql_servers.cc:
Changed to use new ha_... calls
sql/sql_show.cc:
Added counting of access denied errors
Added function for new information schema tables:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Changed to use new ha_... calls
sql/sql_table.cc:
Changed to use new ha_... calls
sql/sql_udf.cc:
Changed to use new ha_... calls
sql/sql_update.cc:
Changed to use new ha_... calls
sql/sql_yacc.yy:
Add new show and flush commands
sql/structs.h:
Add name_length to KEY to avoid some strlen
Added cache_name to KEY for fast storage of keyvalue in cache
Added structs USER_STATS, TABLE_STATS, INDEX_STATS
Added function prototypes for statistics functions
sql/table.cc:
Store db+table+index name into keyinfo->cache_name
sql/table.h:
Added new information schema tables
sql/tztime.cc:
Changed to use new ha_... calls
This assertion would occur if UPDATE was used to update multiple
tables containing an AUTO_INCREMENT column and if the inserted
row had a user-supplied value for that column. The assertion
could then be triggered by the next statement.
The problem was only noticeable on debug builds of the server.
The cause of the problem was that the code for multi update did
not properly reset the TABLE->auto_increment_if_null flag after update.
The flag is used to indicate that a non-null value of an auto_increment field
has been provided by the user or retrieved from a current record.
Open_tables() contains an assertion that tests this flag, and this
was triggered in this case by ALTER TABLE.
This patch fixes the problem by resetting the auto_increment_if_null
field to FALSE once a row has been updated.
This bug is similar to Bug#47274, but for multi update rather
than INSERT DELAYED.
Test case added to update.test.
The flag EXTRA_ACL is used in conjugation with our access checks, yet it is
not clear what impact this flag has.
This is a code clean up which replaces use of EXTRA_ACL with an explicit
function parameter.
The patch also fixes privilege checks for:
- SHOW CREATE TABLE: The new privilege requirement is any privilege on
the table-level.
- CHECKSUM TABLE: Requires SELECT on the table level.
- SHOW CREATE VIEW: Requires SHOW_VIEW and SELECT on the table level
(just as the manual claims)
- SHOW INDEX: Requires any privilege on any column combination.
mysql-test/r/grant.result:
* Error message now shows correct command (SHOW instead of SELECT)
mysql-test/r/grant2.result:
* Error message now shows correct command (SHOW instead of SELECT)
mysql-test/r/grant4.result:
* This test file tests privilege requirements for
SHOW COLUMNS
CREATE TABLE .. LIKE
SHOW CREATE TABLE
SHOW INDEX
CHECKSUM TABLE
SHOW CREATE VIEW
mysql-test/r/information_schema_db.result:
* Added SELECT privilege to testdb_2 as
SHOW CREATE VIEW now demands this privilege
as well as SHOW VIEW.
mysql-test/r/outfile.result:
* Changed error code
mysql-test/r/view_grant.result:
* Additional SELECT privilege is now needed
for SHOW CREATE VIEW
mysql-test/t/grant4.test:
* This test file tests privilege requirements for
SHOW COLUMNS
CREATE TABLE .. LIKE
SHOW CREATE TABLE
SHOW INDEX
CHECKSUM TABLE
SHOW CREATE VIEW
mysql-test/t/information_schema_db.test:
* Added SELECT privilege to testdb_2 as
SHOW CREATE VIEW now demands this privilege
as well as SHOW VIEW.
mysql-test/t/outfile.test:
* Changed error code
mysql-test/t/view_grant.test:
* Additional SELECT privilege is now needed
for SHOW CREATE VIEW
sql/mysql_priv.h:
* Replaced EXTRA_ACL with a parameter
sql/sp_head.cc:
* Replaced EXTRA_ACL with a parameter
sql/sql_acl.cc:
* Converted function documentation to doxygen and clarified some behaviors.
* Changed value from uint to bool to better reflect its meaning.
* Removed pointless variable orig_want_access
* Added function has_any_table_level_privileges to help with requirements
checks during SHOW CREATE TABLE.
sql/sql_acl.h:
* changed signature of check_grant()
* introduced access control function has_any_table_leevl_privileges()
sql/sql_base.cc:
* Check_table_access has new signature
sql/sql_cache.cc:
* Check_table_access has new signature
sql/sql_parse.cc:
* Rewrote function documentation in doxygen comments for: check_access,
check_table_acces, check_grant.
* Removed EXTRA_ACL flag where it doesn't hold any meaningful purpose anymore
and replaced it with a function parameter where any privileges on any column
combination would satisfy the requirement.
* Fixed privilege check for SHOW COLUMNS and SHOW INDEX
* Modified check_table_access to gain clarity in what EXTRA_ACL actually does.
* Modified check_access to gain clarity in what EXTRA_ACL actually does.
* Fixed privilege check for CREATE TABLE .. LIKE .. ; It now requires SELECT
privileges on the table.
* Fixed privilege check for SHOW CREATE TABLE ..; It now requires any privilege
on the table level.
sql/sql_plugin.cc:
* check_table_access has new signature
sql/sql_prepare.cc:
* check_table_access has new signature
sql/sql_show.cc:
* check_table_access has new signature
sql/sql_trigger.cc:
* check_table_access has new signature
sql/sql_update.cc:
* check grant has new signature
sql/sql_view.cc:
* check_table_access has new signature
A fix and a test case for Bug#34898 "mysql_info() reports 0 warnings
while mysql_warning_count() reports 1"
Review the patch by Chad Miller, implement review comments
(since Chad left) and push the patch.
This bug is actually not a bug. At least according to Monty.
See Bug#841 "wrong number of warnings" reported back in July 2003
and closed as "not a bug".
mysql_info() was printing the number of truncated columns, not
the number of warnings.
But since the message of mysql_info() was "Warnings: <number of truncated
columns>", people would expect to get the number
of warnings in it, not the number of truncated columns.
So a possible fix would be to change the message of mysql_info()
to say Rows changed: <n>, truncated: <m>.
Instead, put the number of warnings there. That is, remove the
feature that thd->cuted_fields (the number of truncated fields)
is exposed to the client. The number of truncated columns can be
calculated on the client, by analyzing SHOW WARNINGS output,
and in future we may remove thd->cuted_fields altogether.
So let's have one less thing to worry about.
client/mysqltest.cc:
Fix a bug in mysqltest program which used to return
a wrong number of affected rows in ps-protocol, and a wrong
mysql_info() information in both protocols in presence of warnings.
mysql-test/r/insert.result:
Update results (Bug#34898)
mysql-test/suite/rpl/r/rpl_udf.result:
Update to the changed output of mysqltest: mysql_info() is now printed
before warnings.
mysql-test/t/insert.test:
Add a test case for Bug#34898.
sql/sql_table.cc:
A fix for Bug#34898 - report statement warn count, not the
number of truncated values in mysql_info().
sql/sql_update.cc:
A fix for Bug#34898 - report statement warn count, not the
number of truncated values in mysql_info().
Implemented the server infrastructure for the fix:
1. Added a function LEX_STRING *thd_query_string(THD) to return
a LEX_STRING structure instead of char *.
This is the function that must be called in innodb instead of
thd_query()
2. Did some encapsulation in THD : aggregated thd_query and
thd_query_length into a LEX_STRING and made accessor and mutator
methods for easy code updating.
3. Updated the server code to use the new methods where applicable.
* Finished Monty and Jani's merge
* Some InnoDB tests still fail (because it's old xtradb code run against
newer testsuite). They are expected to go after mergning with the latest
xtradb.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
client/mysqlmanager-pwgen.c:
A fix for warn_unused_result, adding fallback to use of
srand()/rand() if /dev/random cannot be used. Also actually
adds calls to rand() in the second branch so that it actually
creates a random password.
view manipulations
The bespoke flag was not properly reset after last call to
fill_record. Fixed by resetting in caller mysql_update.
mysql-test/r/auto_increment.result:
Bug#46616: Test result.
mysql-test/t/auto_increment.test:
Bug#46616: Test case.
sql/sql_update.cc:
Bug#46616: Fix.
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
without error
When using quick access methods for searching rows in UPDATE or
DELETE there was no check if a fatal error was not already sent
to the client while evaluating the quick condition.
As a result a false OK (following the error) was sent to the
client and the error was thus transformed into a warning.
Fixed by checking for errors sent to the client during
SQL_SELECT::check_quick() and treating them as real errors.
Fixed a wrong test case in group_min_max.test
Fixed a wrong return code in mysql_update() and mysql_delete()
mysql-test/r/bug40113.result:
Bug #40013: test case
mysql-test/r/group_min_max.result:
Bug #40013: fixed a wrong test case
mysql-test/t/bug40113-master.opt:
Bug #40013: test case
mysql-test/t/bug40113.test:
Bug #40013: test case
mysql-test/t/group_min_max.test:
Bug #40013: fixed a wrong test case
sql/sql_delete.cc:
Bug #40113: check for errors evaluating the quick select
sql/sql_update.cc:
Bug #40113: check for errors evaluating the quick select
Large transactions and statements may corrupt the binary log if the size of the
cache, which is set by the max_binlog_cache_size, is not enough to store the
the changes.
In a nutshell, to fix the bug, we save the position of the next character in the
cache before starting processing a statement. If there is a problem, we simply
restore the position thus removing any effect of the statement from the cache.
Unfortunately, to avoid corrupting the binary log, we may end up loosing changes
on non-transactional tables if they do not fit in the cache. In such cases, we
store an Incident_log_event in order to stop the slave and alert users that some
changes were not logged.
Precisely, for every non-transactional changes that do not fit into the cache,
we do the following:
a) the statement is *not* logged
b) an incident event is logged after committing/rolling back the transaction,
if any. Note that if a failure happens before writing the incident event to
the binary log, the slave will not stop and the master will not have reported
any error.
c) its respective statement gives an error
For transactional changes that do not fit into the cache, we do the following:
a) the statement is *not* logged
b) its respective statement gives an error
To work properly, this patch requires two additional things. Firstly, callers to
MYSQL_BIN_LOG::write and THD::binlog_query must handle any error returned and
take the appropriate actions such as undoing the effects of a statement. We
already changed some calls in the sql_insert.cc, sql_update.cc and sql_insert.cc
modules but the remaining calls spread all over the code should be handled in
BUG#37148. Secondly, statements must be either classified as DDL or DML because
DDLs that do not get into the cache must generate an incident event since they
cannot be rolled back.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the second patch, fixing more
of the warnings.
Make the caller of Query_log_event, Execute_load_log_event
constructors and THD::binlog_query to provide the error code
instead of having the constructors to figure out the error code.
sql/log_event.cc:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument instead of figuring it out by itself
sql/log_event.h:
Changed constructors of Query_log_event and Execute_load_log_event to accept the error code argument
Certain multi-updates gave different results on InnoDB from
to MyISAM, due to on-the-fly updates being used on the former and
the update order matters.
Fixed by turning off on-the-fly updates when update order
dependencies are present.
mysql-test/r/innodb_mysql.result:
Bug#43580: Test result.
mysql-test/suite/rpl/r/rpl_slave_skip.result:
Bug#43580: Changed test result. The InnoDB result is now what it would have been on MyISAM.
mysql-test/t/innodb_mysql.test:
Bug#43580: Test case.
sql/sql_base.cc:
Bug#43580: Added a word of caution about using tmp_set here.
sql/sql_update.cc:
Bug#43580: Fix.
Calls to TABLE::mark_columns_needed_for_update() are moved
from mysql_multi_update_prepare() and right before the decison
to do on-the-fly updates to the place where we do (or don't do)
on-the-fly updates.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
There were so many changes into mtr (this is the new mtr coming) that I rather
copied mtr from 6.0-main here (at least this one knows how to run Maria tests).
I also fixed suite/maria tests to be accepted by the new mtr.
mysys/thr_mutex.c:
adding DBUG_PRINT here, so that we can locate where the warning is issued.
Documented behaviour was broken by the patch for bug 33699
that actually is not a bug.
This fix reverts patch for bug 33699 and reverts the
UPDATE of NOT NULL field with NULL query to old
behavior.
mysql-test/extra/rpl_tests/rpl_extraMaster_Col.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/include/ps_modify.inc:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/auto_increment.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/csv_not_null.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/null.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_2myisam.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_3innodb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_4heap.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/ps_5merge.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/r/warnings.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/ndb/r/ps_7ndb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/suite/rpl/t/rpl_err_ignoredtable.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/auto_increment.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/csv_not_null.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/null.test:
Bug #39265: fix for the bug 33699 should be reverted
mysql-test/t/warnings.test:
Bug #39265: fix for the bug 33699 should be reverted
sql/sql_update.cc:
Bug #39265: fix for the bug 33699 should be reverted
- Added braces around expressions with &&, ||, & and |
- Added empty line before ; for empty while and for loops
- Added () around if with assignments
- Removed const before function returning simple type
Changed BUILD scripts to not build with NDB
BUILD/SETUP.sh:
By default, don't build ndb with --max in Maria tree.
NDB is not kept up to date anyway in 5.1
client/mysql.cc:
Added braces around && to get rid of compiler warnings
sql/event_db_repository.cc:
Added braces around && to get rid of compiler warnings
sql/events.cc:
Added braces around && to get rid of compiler warnings
sql/field.cc:
Added braces around && to get rid of compiler warnings
Fixed for loops
sql/field.h:
Added braces around & to get rid of compiler warnings
sql/field_conv.cc:
Added braces around && to get rid of compiler warnings
Fixed bug when copying between DATETIME fields and strict dates are used
Removed not needeed else
sql/gstream.cc:
Added braces around && to get rid of compiler warnings
sql/ha_ndbcluster.cc:
Added braces around && to get rid of compiler warnings
Added {} to get rid of compiler warnings
sql/handler.cc:
Added braces around && to get rid of compiler warnings
sql/item.cc:
Added braces around && to get rid of compiler warnings
sql/item_cmpfunc.cc:
Added braces around && to get rid of compiler warnings
Removed some not needed space
sql/item_func.cc:
Added braces around && to get rid of compiler warnings
sql/item_strfunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_subselect.cc:
Added braces around && to get rid of compiler warnings
sql/item_sum.cc:
Added braces around && to get rid of compiler warnings
sql/item_timefunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_xmlfunc.cc:
Added empty line before ; for empty while and for loops
sql/log.cc:
Added braces around && to get rid of compiler warnings
sql/log_event.cc:
Added braces around && to get rid of compiler warnings
Removed not needed else
sql/log_event_old.cc:
Added braces around && to get rid of compiler warnings
sql/opt_range.cc:
Added braces around && to get rid of compiler warnings
sql/opt_sum.cc:
Added braces around && to get rid of compiler warnings
sql/set_var.cc:
Added empty line before ; for empty while and for loops
Added () around if with assignments
sql/slave.cc:
Added braces around && to get rid of compiler warnings
Added empty line before ; for empty while and for loops
sql/spatial.h:
Added braces around && to get rid of compiler warnings
sql/sql_acl.cc:
Added braces around && to get rid of compiler warnings
sql/sql_analyse.cc:
Added empty line before ; for empty while and for loops
sql/sql_base.cc:
Added braces around && to get rid of compiler warnings
sql/sql_connect.cc:
Added braces around && to get rid of compiler warnings
sql/sql_db.cc:
Added braces around && to get rid of compiler warnings
sql/sql_delete.cc:
Added braces around && to get rid of compiler warnings
sql/sql_help.cc:
Added empty line before ; for empty while and for loops
sql/sql_insert.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
sql/sql_lex.cc:
Cast char array references to uchar; Fixed wrong array referencing when using characters > ASCII 128 in SQL statments
Added empty line before ; for empty while and for loops
Trivial indent fixes
Added braces around && to get rid of compiler warnings
sql/sql_load.cc:
Added braces around && to get rid of compiler warnings
sql/sql_parse.cc:
Added braces around && to get rid of compiler warnings
sql/sql_partition.cc:
Added braces around && to get rid of compiler warnings
sql/sql_plugin.cc:
Fixed bug in detecing if option variable should be readonly
Added empty line before ; for empty while and for loops
sql/sql_prepare.cc:
Added braces around && to get rid of compiler warnings
sql/sql_select.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
Added empty line before ; for empty while and for loops
sql/sql_show.cc:
Added braces around && to get rid of compiler warnings
sql/sql_table.cc:
Added braces around && to get rid of compiler warnings
sql/sql_trigger.cc:
Added braces around && to get rid of compiler warnings
sql/sql_update.cc:
Added braces around && to get rid of compiler warnings
sql/sql_yacc.yy:
Added braces around && to get rid of compiler warnings
sql/table.cc:
Added braces around && to get rid of compiler warnings
sql/table.h:
Added braces around && to get rid of compiler warnings
sql/time.cc:
Added braces around && to get rid of compiler warnings
sql/tztime.cc:
Added braces around && to get rid of compiler warnings
sql/uniques.cc:
Added braces around && to get rid of compiler warnings
storage/federated/ha_federated.cc:
Fixed bug in testing of variable to ha_info() (Not critical)
storage/heap/ha_heap.cc:
Added braces around && to get rid of compiler warnings
storage/maria/ha_maria.cc:
Fixed bug: Mark that maria_log_dir_path is readonly
Added braces around && to get rid of compiler warnings
storage/ndb/include/ndbapi/NdbEventOperation.hpp:
Removed const before function returning simple type
storage/ndb/include/ndbapi/NdbOperation.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/Ndb.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/NdbEventOperation.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbRecAttr.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/TransporterFacade.hpp:
Added braces around && to get rid of compiler warnings
