Add an error code to the wait_for_commit facility.
Now, when a transaction fails, it can signal the error to
any subsequent transaction that is waiting for it to commit.
The waiting transactions then receive the error code back from
wait_for_prior_commit() and can handle the error appropriately.
Also fix one race that could cause crash if @@slave_parallel_threads
were changed several times quickly in succession.
- Made slaves temporary table multi-thread slave safe by adding mutex around save_temporary_table usage.
- rli->save_temporary_tables is the active list of all used temporary tables
- This is copied to THD->temporary_tables when temporary tables are opened and updated when temporary tables are closed
- Added THD->lock_temporary_tables() and THD->unlock_temporary_tables() to simplify this.
- Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code.
- Added is_part_of_group() to mark functions that are part of the next function. This replaces setting IN_STMT when events are executed.
- Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
- If slave_skip_counter is set run things in single threaded mode. This simplifies code for skipping events.
- Updating state of relay log (IN_STMT and IN_TRANSACTION) is moved to one single function: update_state_of_relay_log()
We can't use OPTION_BEGIN to check for the state anymore as the sql_driver and sql execution threads may be different.
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts
is_in_group() is now independent of state of executed transaction.
- Reset thd->transaction.all.modified_non_trans_table() if we did set it for single table row events.
This was mainly for keeping the flag as documented.
- Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
- Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
- Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
- Changed some functions to take rpl_group_info instead of Relay_log_info to make them multi-slave safe and to simplify usage
- do_shall_skip()
- continue_group()
- sql_slave_killed()
- next_event()
- Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
- set_thd_in_use_temporary_tables() removed as in_use is set on usage
- Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
- In open_table() reuse code from find_temporary_table()
Other things:
- More DBUG statements
- Fixed the rpl_incident.test can be run with --debug
- More comments
- Disabled not used function rpl_connect_master()
mysql-test/suite/perfschema/r/all_instances.result:
Moved sleep_lock and sleep_cond to rpl_group_info
mysql-test/suite/rpl/r/rpl_incident.result:
Updated result
mysql-test/suite/rpl/t/rpl_incident-master.opt:
Not needed anymore
mysql-test/suite/rpl/t/rpl_incident.test:
Fixed that test can be run with --debug
sql/handler.cc:
More DBUG_PRINT
sql/log.cc:
More comments
sql/log_event.cc:
Added DBUG statements
do_shall_skip(), continue_group() now takes rpl_group_info param
Use is_begin(), is_commit() and is_rollback() functions instead of inspecting query string
We don't have set slaves temporary tables 'in_use' as this is now done when tables are opened.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
Use IN_TRANSACTION flag to test state of relay log.
In rows_event_stmt_cleanup() reset thd->transaction.all.modified_non_trans_table if we had set this before.
sql/log_event.h:
do_shall_skip(), continue_group() now takes rpl_group_info param
Added is_part_of_group() to mark events that are part of the next event. This replaces setting IN_STMT when events are executed.
Added is_begin(), is_commit() and is_rollback() functions to Query_log_event to simplify code.
sql/log_event_old.cc:
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/log_event_old.h:
Added is_part_of_group() to mark events that are part of the next event.
do_shall_skip(), continue_group() now takes rpl_group_info param
sql/mysqld.cc:
Changed slave_open_temp_tables to uint32 to be able to use atomic operators on it.
Relay_log_info::sleep_lock -> Rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> Rpl_group_info::sleep_cond
sql/mysqld.h:
Updated types and names
sql/rpl_gtid.cc:
More DBUG
sql/rpl_parallel.cc:
Updated TODO section
Set thd for event that is execution
Use new is_begin(), is_commit() and is_rollback() functions.
More comments
sql/rpl_rli.cc:
sql_thd -> sql_driver_thd
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Clear IN_STMT and IN_TRANSACTION in init_relay_log_pos() and Relay_log_info::cleanup_context() to ensure the flags doesn't survive slave restarts.
Reset table->in_use for temporary tables as the table may have been used by another THD.
Use IN_TRANSACTION instead of OPTION_BEGIN to check state of relay log.
Removed IN_STMT flag setting. This is now done in update_state_of_relay_log()
sql/rpl_rli.h:
Changed relay log state flags to bit masks instead of bit positions (most other code we have uses bit masks)
Added IN_TRANSACTION to mark if we are in a BEGIN ... COMMIT section.
save_temporary_tables is now thread safe
Relay_log_info::sleep_lock -> rpl_group_info::sleep_lock
Relay_log_info::sleep_cond -> rpl_group_info::sleep_cond
Relay_log_info->sql_thd renamed to Relay_log_info->sql_driver_thd to avoid wrong usage for merged code
is_in_group() is now independent of state of executed transaction.
sql/slave.cc:
Simplifed arguments to io_salve_killed(), sql_slave_killed() and check_io_slave_killed(); No reason to supply THD as this is part of the given structure.
set_thd_in_use_temporary_tables() removed as in_use is set on usage in sql_base.cc
sql_thd -> sql_driver_thd
More DBUG
Added update_state_of_relay_log() which will calculate the IN_STMT and IN_TRANSACTION state of the relay log after the current element is executed.
If slave_skip_counter is set run things in single threaded mode.
Simplifed arguments to io_salve_killed(), check_io_slave_killed() and sql_slave_killed(); No reason to supply THD as this is part of the given structure.
Added information to thd_proc_info() which thread is waiting for slave mutex to exit.
Disabled not used function rpl_connect_master()
Updated argument to next_event()
sql/sql_base.cc:
Added mutex around usage of slave's temporary tables. The active list is always kept up to date in sql->rgi_slave->save_temporary_tables.
Clear thd->temporary_tables after query (safety)
More DBUG
When using temporary table, set table->in_use to current thd as the THD may be different for slave threads.
Some code is ifdef:ed with REMOVE_AFTER_MERGE_WITH_10 as the given code in 10.0 is not yet in this tree.
In open_table() reuse code from find_temporary_table()
sql/sql_binlog.cc:
rli->sql_thd -> rli->sql_driver_thd
Remove duplicate setting of rgi->rli
sql/sql_class.cc:
Added helper functions rgi_lock_temporary_tables() and rgi_unlock_temporary_tables()
Would have been nicer to have these inline, but there was no easy way to do that
sql/sql_class.h:
Added functions to protect slaves temporary tables
sql/sql_parse.cc:
Added DBUG_PRINT
sql/transaction.cc:
Added comment
AND 'KILL SESSION' LEAD TO CRASH
Analysis:
--------
This situation occurs when the connection executes query
"show engine innodb status" and this connection is killed by
executing statement "kill <con>" by another connection.
In function "innodb_show_status", function "stat_print"
is called to print the status but return value of function
is not checked. After killing connection, if write to
connection fails then error is returned and same is set
in Diagnostic area. Since FALSE is returned from
"innodb_show_status" now, assert to check no error
is set in function "set_eof_status" (called from
my_eof) is failing.
Fix:
----
Changed code to check return value of function "stat_print"
in "innodb_show_status".
STATUS OF ROLLBACKED TRANSACTION" and bug #17054007 - "TRANSACTION
IS NOT FULLY ROLLED BACK IN CASE OF INNODB DEADLOCK".
The problem in the first bug report was that although deadlock involving
metadata locks was reported using the same error code and message as InnoDB
deadlock it didn't rollback transaction like the latter. This caused
confusion to users as in some cases after ER_LOCK_DEADLOCK transaction
could have been restarted immediately and in some cases rollback was
required.
The problem in the second bug report was that although InnoDB deadlock
caused transaction rollback in all storage engines it didn't cause release
of metadata locks. So concurrent DDL on the tables used in transaction was
blocked until implicit or explicit COMMIT or ROLLBACK was issued in the
connection which got InnoDB deadlock.
The former issue has stemmed from the fact that when support for detection
and reporting metadata locks deadlocks was added we erroneously assumed
that InnoDB doesn't rollback transaction on deadlock but only last statement
(while this is what happens on InnoDB lock timeout actually) and so didn't
implement rollback of transactions on MDL deadlocks.
The latter issue was caused by the fact that rollback of transaction due
to deadlock is carried out by setting THD::transaction_rollback_request
flag at the point where deadlock is detected and performing rollback
inside of trans_rollback_stmt() call when this flag is set. And
trans_rollback_stmt() is not aware of MDL locks, so no MDL locks are
released.
This patch solves these two problems in the following way:
- In case when MDL deadlock is detect transaction rollback is requested
by setting THD::transaction_rollback_request flag.
- Code performing rollback of transaction if THD::transaction_rollback_request
is moved out from trans_rollback_stmt(). Now we handle rollback request
on the same level as we call trans_rollback_stmt() and release statement/
transaction MDL locks.
Following variables do not require LOCK_open protection anymore:
- table_def_cache (renamed to tdc_hash) is protected by rw-lock
LOCK_tdc_hash;
- table_def_shutdown_in_progress doesn't need LOCK_open protection;
- last_table_id use atomics;
- TABLE_SHARE::ref_count (renamed to TABLE_SHARE::tdc.ref_count)
is protected by TABLE_SHARE::tdc.LOCK_table_share;
- TABLE_SHARE::next, ::prev (renamed to tdc.next and tdc.prev),
oldest_unused_share, end_of_unused_share are protected by
LOCK_unused_shares;
- TABLE_SHARE::m_flush_tickets (renamed to tdc.m_flush_tickets)
is protected by TABLE_SHARE::tdc.LOCK_table_share;
- refresh_version (renamed to tdc_version) use atomics.
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
revno: 4559
committer: Marc Alff <marc.alff@oracle.com>
branch nick: mysql-5.6-bug14741537-v4
timestamp: Thu 2012-11-08 22:40:31 +0100
message:
Bug#14741537 - MYSQL 5.6, GTID AND PERFORMANCE_SCHEMA
Before this fix, statements using performance_schema tables:
- were marked as unsafe for replication,
- did cause warnings during execution,
- were written to the binlog, either in STATEMENT or ROW format.
When using replication with the new GTID feature,
unsafe warnings are elevated to errors,
which prevents to use both the performance_schema and GTID together.
The root cause of the problem is not related to raising warnings/errors
in some special cases, but deeper: statements involving the performance
schema should not even be written to the binary log in the first place,
because the content of the performance schema tables is 'local' to a server
instance, and may differ greatly between nodes in a replication
topology.
In particular, the DBA should be able to configure (INSERT, UPDATE, DELETE)
or flush (TRUNCATE) performance schema tables on one node,
without affecting other nodes.
This fix introduces the concept of a 'non-replicated' or 'local' table,
and adjusts the replication logic to ignore tables that are not replicated
when deciding if or how to log a statement to the binlog.
Note that while this issue was detected using the performance_schema,
other tables are also affected by the same problem.
This fix define as 'local' the following tables, which are then never
replicated:
- performance_schema.*
- mysql.general_log
- mysql.slow_log
- mysql.slave_relay_log_info
- mysql.slave_master_info
- mysql.slave_worker_info
Existing behavior for information_schema.* is unchanged by this fix,
to limit the scope of changes.
Coding wise, this fix implements the following changes:
1)
Performance schema tables are not using any replication flags,
since performance schema tables are not replicated.
2)
In open_table_from_share(),
tables with no replication capabilities (performance_schema.*),
tables with TABLE_CATEGORY_LOG (logs)
and tables with TABLE_CATEGORY_RPL_INFO (replication)
are marked as non replicated, with TABLE::no_replicate
3)
A new THD member, THD::m_binlog_filter_state,
indicate if the current statement is written to the binlog
(normal cases for most statements), or is to be discarded
(because the statements affects non replicated tables).
4)
In THD::decide_logging_format(), the replication logic
is changed to take into account non replicated tables.
Statements that affect only non replicated tables are
executed normally (no warning or errors), but not written
to the binlog.
Statements that affect (i.e., write to) a replicated table
while also using (i.e., reading from or writing to) a non replicated table
are executed normally in MIXED and ROW binlog format,
and cause a new error in STATEMENT binlog format.
THD::decide_logging_format() uses THD::m_binlog_filter_state
to indicate if a statement is to be ignored, when writing to
the binlog.
5)
In THD::binlog_query(), statements marked as ignored
are not written to the binary log.
6)
For row based replication, the existing test for 'table->no_replicate',
has been moved from binlog_log_row() to check_table_binlog_row_based().
-Note 1031 Table storage engine for 't1' doesn't have this option
+Note 1031 Table storage engine for 'InnoDB' doesn't have this option
They were caused by a change in MariaDB which changed ER_ILLEGAL_HA message
text to be like:
"Storage engine InnoDB of the table `test`.`t1` doesn't have this option"
Some the error calls were changed to pass new parameters, but some were left
to be old. Also the error text in errmsg-ut8.txt was not changed.
Implement facility for the commit in one thread to wait for the commit of
another to complete first. The wait is done in a way that does not hinder
that a waiter and a waitee can group commit together with a single fsync()
in both binlog and InnoDB. The wait is done efficiently with respect to
locking.
The patch was originally made to support TaoBao parallel replication with
in-order commit; now it will be adapted to also be used for parallel
replication of group-committed transactions.
A waiter THD registers itself with a prior waitee THD. The waiter will then
complete its commit at the earliest in the same group commit of the waitee
(when using binlog). The wait can also be done explicitly by the waitee.
1. DROP DATABASE should use ha_discover_table_names(), not look at .frm files.
2. filename_to_tablename() also encodes temp file names #sql- -> #mysql50##sql
3. no special treatment for #sql- files, no TABLE_LIST::internal_tmp_table
4. discover also table file names, that start from #
-Added test and extra code to ensure we don't leave keyread on for a handler table.
-Create on disk temporary files always with long data pointers if SQL_SMALL_RESULT is not used. This ensures that we can handle temporary files bigger than 4G.
mysql-test/include/default_mysqld.cnf:
Run test suite with smaller aria keybuffer size
mysql-test/suite/maria/maria3.result:
Run test suite with smaller aria keybuffer size
mysql-test/suite/sys_vars/r/aria_pagecache_buffer_size_basic.result:
Run test suite with smaller aria keybuffer size
sql/handler.cc:
Disable key read (extra safety if something went wrong)
sql/multi_range_read.cc:
Ensure we have don't leave keyread on for secondary_file
sql/opt_range.cc:
Simplify code with mark_columns_used_by_index_no_reset()
Ensure that read_keys_and_merge() disableds keyread if it enables it
sql/opt_subselect.cc:
Remove not anymore used argument for create_internal_tmp_table()
sql/sql_derived.cc:
Remove not anymore used argument for create_internal_tmp_table()
sql/sql_select.cc:
Use 'enable_keyread()' instead of calling HA_EXTRA_RESET. (Makes debugging easier)
Create on disk temporary files always with long data pointers if SQL_SMALL_RESULT is not used. This ensures that we can handle temporary files bigger than 4G.
Remove not anymore used argument for create_internal_tmp_table()
More DBUG
sql/sql_select.h:
Remove not anymore used argument for create_internal_tmp_table()
* print "table doesn't exist in engine" when a table doesn't exist in the engine,
instead of "file not found" (if no file was involved)
* print a complete filename that cannot be found ('t1.MYI', not 't1')
* it's not an error for a DROP if a table doesn't exist in the engine (or some table
files cannot be found) - if the DROP succeeded regardless
