column is used for ORDER BY
Problem: filesort isn't meant for null length sort data
(e.g. char(0)), that leads to a server crash.
Fix: disregard sort order if sort data record length is 0 (nothing
to sort).
mysql-test/r/select.result:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- test result.
mysql-test/t/select.test:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- test case.
sql/filesort.cc:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- assert added as filesort cannot handle null length sort data.
sql/sql_select.cc:
Fix for bug#49897: crash in ptr_compare when char(0) NOT NULL
column is used for ORDER BY
- don't sort null length data e.g. in case of ORDER BY CHAR(0).
number to InnoDB index structure directly. Fix Bug #47622:
"the new index is added before the existing ones in MySQL,
but after one in SE".
rb://215, approved by Marko
The problem was that a DROP TRIGGER statement inside a stored
procedure could cause a crash in subsequent invocations. This
was due to the addition, on the first execution, of a temporary
table reference to the stored procedure query table list. In
a subsequent invocation, there would be a attempt to reinitialize
the temporary table reference, which by then was already gone.
The solution is to backup and reset the query table list each
time a trigger needs to be dropped. This ensures that any temp
changes to the query table list are discarded. It is safe to
do so at this time as drop trigger is restricted from more
complicated scenarios (ie, not allowed within stored functions,
etc).
mysql-test/r/sp-bugs.result:
Add test case result for Bug#50423
mysql-test/t/sp-bugs.test:
Add test case for Bug#50423
sql/sql_trigger.cc:
Backup and reset the query table list.
Remove now unnecessary manual reset of the query table list.
Server crashes when accessing ARCHIVE table with missing
.ARZ file.
When opening a table, ARCHIVE didn't properly pass through
error code from lower level azopen() to higher level open()
method.
mysql-test/r/archive.result:
A test case for BUG#48757.
mysql-test/t/archive.test:
A test case for BUG#48757.
storage/archive/ha_archive.cc:
Pass through error code from azopen().
Bulk REPLACE or bulk INSERT ... ON DUPLICATE KEY UPDATE may
break dynamic record MyISAM table.
The problem is limited to bulk REPLACE and INSERT ... ON
DUPLICATE KEY UPDATE, because only these operations may
be done via UPDATE internally and may request write cache.
When flushing write cache, MyISAM may write remaining
cached data at wrong position. Fixed by requesting write
cache to seek to a correct position.
mysql-test/r/myisam.result:
A test case for BUG#49628.
mysql-test/t/myisam.test:
A test case for BUG#49628.
storage/myisam/mi_dynrec.c:
delete_dynamic_record() may change data file position.
IO cache must be notified as it may still have cached
data, which has to be flushed later.
table and view...
Invalid memory reads after a query referencing MyISAM table
multiple times with write lock. Invalid memory reads may
lead to server crash, valgrind warnings, incorrect values
in INFORMATION_SCHEMA.TABLES.{TABLE_ROWS, DATA_LENGTH,
INDEX_LENGTH, ...}.
This may happen when one of the table instances gets closed
after a query, e.g. out of slots in open tables cache. UNION,
MERGE and VIEW are irrelevant.
The problem was that MyISAM didn't restore state info
pointer to default value.
myisam/mi_locking.c:
When a query is referencing MyISAM table multiple times
with a write lock, all table instances share the same
state info, pointing to MI_INFO::save_state of
"primary" table instance.
When lock is released, state pointer was restored only
for the primary table instance. Secondary table instances
are still pointing to save_state of primary table
instance.
Primary table instance may get closed, leaving secondary
table instances state pointer pointing to freed memory.
That's mostly ok, since next lock will update state info
pointer to correct value. But there're some cases, when
this secondary table instance state info is accessed
without a lock, e.g. INFORMATION_SCHEMA, MERGE (in 5.1
and up), MyISAM itself for DBUG purposes.
Restore default value of state pointer unconditionally,
for both primary and secondary table instances.
mysql-test/r/myisam.result:
A test case for BUG#48438.
mysql-test/t/myisam.test:
A test case for BUG#48438.
In case of 'CREATE VIEW' subselect transformation does not happen(see JOIN::prepare).
During fix_fields Item_row may call is_null() method for its arugmens which
leads to item calculation(wrong subselect in our case as
transformation did not happen before). This is_null() call
does not make sence for 'CREATE VIEW'.
Note:
Only Item_row is affected because other items don't call is_null()
during fix_fields() for arguments.
mysql-test/r/view.result:
test case
mysql-test/t/view.test:
test case
sql/item_row.cc:
skip is_null() call in case of 'CREATE VIEW' as unnecessary.
SHOW CREATE TABLE on a view (v1) that contains a function whose
statement uses another view (v2), could trigger a infinite loop
if the view referenced within the function causes a warning to
be raised while opening the said view (v2).
The problem was a infinite loop over the stack of internal error
handlers. The problem would be triggered if the stack contained
two or more handlers and the first two handlers didn't handle the
raised condition. In this case, the loop variable would always
point to the second handler in the stack.
The solution is to correct the loop variable assignment so that
the loop is able to iterate over all handlers in the stack.
mysql-test/r/view.result:
Add test case result for Bug#48449.
mysql-test/std_data/bug48449.frm:
Add a incomplete view definition that causes a warning to be
issued.
mysql-test/t/view.test:
Add test case for Bug#48449
sql/sql_class.cc:
Iterate over all handlers in the stack.
in multitable delete/subquery
SQL_BUFFER_RESULT should not have an effect on non-SELECT
statements according to our documentation.
Fixed by not passing it through to multi-table DELETE (similarly
to how it's done for multi-table UPDATE).
The problem was that a failure to open a view wasn't being
properly handled. When opening a view with unknown definer,
the open procedure would be treated as successful and would
later crash when attempting to lock the view (which wasn't
opened to begin with).
The solution is to skip further processing when opening a
table if it fails with a fatal error.
mysql-test/r/view.result:
Add test case result for Bug#47734.
mysql-test/t/view.test:
Add test case for Bug#47734.
sql/sql_base.cc:
Skip further processing if opening a table failed due to
a fatal error (for the statement).
being logged to slow query log
The problem is that the execution time for a multi-statement
stored procedure as a whole may not be accurate, and thus not
be entered into the slow query log even if the total time
exceeds long_query_time. The reason for this is that
THD::utime_after_lock used for time calculation may be reset
at the start of each new statement, possibly leaving the total
SP execution equal to the time spent executing the last
statement in the SP.
This patch stores the utime on start of SP execution, and
restores it on exit of SP execution. A test is added.
mysql-test/suite/sys_vars/r/slow_query_log_func.result:
New test results for #47905.
mysql-test/suite/sys_vars/t/slow_query_log_func.test:
New test case for #47905.
sql/sp_head.cc:
Save and restore the THD::utime_after_lock on entry and
exit of execute_procedure().
error causes debug assertion
The IGNORE option of the multiple-table UPDATE command was
not intended to suppress errors caused by the
sql_safe_updates mode. This flag will raise an error if the
execution of UPDATE does not use a key for row retrieval,
and should continue do so regardless of the IGNORE option.
However the implementation of IGNORE does not support
exceptions to the rule; it always converts errors to
warnings and cannot be extended. The Internal_error_handler
interface offers the infrastructure to handle individual
errors, making sure that the error raised by
sql_safe_updates is not silenced.
Fixed by implementing an Internal_error_handler and using it
for UPDATE IGNORE commands.
WL#5182 is a follow-up to WL#5154, deprecating a few more options
and system variables.
client/client_priv.h:
The warning message has been changed to not include
a specific version number in the text.
client/mysql.cc:
--no-tee is deprecated
client/mysqldump.c:
--all is deprecated
-a now points to create-options
mysql-test/r/mysqlbinlog.result:
Warning text changed
mysql-test/suite/rpl/r/rpl_row_mysqlbinlog.result:
Warning text changed
sql/mysql_priv.h:
The warning message has been changed to not include
a specific version number in the text.
sql/mysqld.cc:
--use-symbolic-links is deprecated
-s now points to --symbolic-links
--warnings is deprecated
-W now points to --log-warnings
myisam_max_extra_sort_file_size is deprecated
record_buffer is deprecated
--log-update is deprecated
--sql-bin-update-same is deprecated
--skip-locking is deprecated
--skip-symlink is deprecated
--enable-locking is deprecated
--delay-key-write-for-all-tables is deprecated
The 'rpl_get_master_version_and_clock' test verifies if the slave I/O
thread tries to reconnect to master when it tries to get the values of
the UNIX_TIMESTAMP, SERVER_ID from master under network disconnection.
So the master server is restarted for making the transient network
disconnection, during the period the COM_REGISTER_SLAVE failures are
produced in server log file when the slave I/O thread tries to
register on master.
To fix the problem, suppress COM_REGISTER_SLAVE failures in server log
file by mtr suppression, because they are expected.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
Removed mtr.add_suppression("Get master clock failed with error: ")
and mtr.add_suppression("Get master SERVER_ID failed with error: ").
Because they are suppressed globally.
When replicating from 4.1 master to 5.0 slave START SLAVE UNTIL can stop too late.
The necessary in calculating of the beginning of an event the event's length
did not correspond to the master's genuine information at the event's execution time.
That piece of info was changed at the event's relay-logging due to binlog_version<4 event
conversion by IO thread.
Fixed with storing the master genuine Query_log_event size into a new status
variable at relay-logging of the event. The stored info is extacted at the event
execution and participate further to caclulate the correct start position of the event
in the until-pos stopping routine.
The new status variable's algorithm will be only active when the event comes
from the master of version < 5.0 (binlog_version < 4).
mysql-test/r/rpl_until.result:
results changed.
mysql-test/std_data/bug47142_master-bin.000001:
a binlog from 4.1 master to replace one of the running 5.x master is added as
part of Bug #47142 regression test.
mysql-test/t/rpl_until.test:
Regression test for Bug #47142 is added.
sql/log_event.cc:
Storing and extracting the master's genuine size of the event from the status
var of the event packet header.
The binlog_version<4 query-log-event is
a. converted into the modern binlog_version==4 to store the original size of the event
into a new status var; the converted representation goes into the relay log.
b. the converted event is read out and the stored size is engaged in the start pos calculation.
The new status is active only for events that IO thread instantiates for the sake of the conversion.
sql/log_event.h:
Incrementing the max szie of MAX_SIZE_LOG_EVENT_STATUS because of the new status var;
Defining the new status variable to hold the master's genuine event size;
Augmenting the Query_log_event with a new member to hold a value to store/extact from the status
var of the event packet header.
Detailed revision comments:
r6471 | calvin | 2010-01-16 01:43:27 +0200 (Sat, 16 Jan 2010) | 4 lines
branches/5.1: fix bug#49396: main.innodb test fails in embedded mode
Change replace_result by using $MYSQLD_DATADIR. Tested in both embedded
mode and normal server mode.
Detailed revision comments:
r6492 | sunny | 2010-01-21 09:38:35 +0200 (Thu, 21 Jan 2010) | 1 line
branches/5.1: Add reference to bug#47621 in the comment.
Detailed revision comments:
r6489 | sunny | 2010-01-21 02:57:50 +0200 (Thu, 21 Jan 2010) | 2 lines
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
Detailed revision comments:
r6488 | sunny | 2010-01-21 02:55:08 +0200 (Thu, 21 Jan 2010) | 2 lines
branches/5.1: Factor out test for bug#44030 from innodb-autoinc.test
into a separate test/result files.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
mysql-test/extra/rpl_tests/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist'.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Correct the test result, all the above binlog event
should be row-based after the bug49132 is fixed IN RBR.
mysql-test/suite/ndb/r/ndb_tmp_table_and_DDL.result:
Test result for bug#49132 base on ndb engine.
mysql-test/suite/ndb/t/ndb_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on ndb engine.
mysql-test/suite/rpl/r/rpl_tmp_table_and_DDL.result:
Test result for bug#49132 base on myisam engine.
mysql-test/suite/rpl/t/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on myisam engine.
sql/event_db_repository.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/events.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sp.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_acl.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_udf.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
mysql-test/suite/rpl/t/rpl_set_null_innodb.test:
InnoDB test.
mysql-test/suite/rpl/t/rpl_set_null_myisam.test:
MyISAM test.
mysql-test/suite/rpl_ndb/t/rpl_ndb_set_null.test:
NDB test.
sql/field.h:
Changed reset so that it also clears the bits
among the null_bits for the Field_bit class.
sql/rpl_record.cc:
Resetting field after setting it to null when unpacking
row.
check_access() returning false for a database does not
guarantee that the access is granted to it.
This wrong condition in filling the INFORMATION_SCHEMA
tables causes extra tables to be returned to the user
even if he has no rights to see them.
Fixed by correcting the condition.
fulltext search and row op.
The search for fulltext indexes is searching for some special
predicate layouts. While doing so it's not checking for the number
of columns of the expressions it tries to calculate.
And since row expressions can't return a single scalar value there
was a crash.
Fixed by checking if the expressions are scalar (in addition to
being constant) before calling Item::val_xxx() methods.
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
Several items said to be deprecated in the 4.1 manual
have never been removed. This worklog adds deprecation
warnings when these items are used, and warns the user
that the items will be removed in MySQL 5.6.
A couple of previously deprecation decision have been
reversed (see single file comments)
client/client_priv.h:
Macro similar to the one in the server (mysql_priv.h)
for printing a deprecation warning message
client/mysql.cc:
no-auto-rehash will not be deprecated
skip-line-numbers will not be deprecated
skip-column-names will not be deprecated
no-pager is deprecated
set-variable is deprecated
no-named-commands is deprecated
client/mysqladmin.cc:
set-variable is deprecated
client/mysqlbinlog.cc:
position is deprecated
client/mysqldump.c:
first-slave is deprecated
no-set-names is deprecated
set-variable is deprecated
mysql-test/r/mysqlbinlog.result:
Adding the [Warning] to the test case, just to show that the
deprecation works.
The test case will be changed in Celosia to use --start-position.
mysys/my_getopt.c:
set-variable (include -O) is deprecated
scripts/mysqld_multi.sh:
Warning for mysqld_multi
sql/mysqld.cc:
default-collation is deprecated
log-bin-trust-routine-creators is deprecated
set-variable is deprecated
default-character-set is deprecated
safe-show-database is deprecated
sql/share/errmsg.txt:
Added version number for sql_log_update deprecation message.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
mysql-test/extra/rpl_tests/rpl_mixing_engines.inc:
Backported this from Celosia to improve the test cases related to the NTM issue.
sql/log.cc:
Checks the --binlog-direct-non-transactional-updates before choosing
to either use the trxn-cache or not.
sql/mysqld.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/set_var.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/sql_class.h:
Introduces the option --binlog-direct-non-transactional-updates.
