check sequence privileges in Item_func_nextval::fix_fields(),
just like column privileges are checked in Item_field::fix_fields()
remove sequence specific hacks that kinda made sequence privilege
checks works, but not in all cases. And they were too lax,
didn't requre SELECT privilege for NEXTVAL. Also INSERT privilege looks
wrong here, UPDATE would've been more appropriate, but won't
change that for compatibility reasons.
also fixes
MDEV-36413 User without any privileges to a sequence can read from it and modify it via column default
DROP TABLE on child and UPDATE of parent table can cause an MDL BF-BF
conflict when applied concurrently.
DROP TABLE takes MDL locks on both child and its parent table, however
it only it did not add certification keys for the parent table.
This patch adds the following:
* Append certification keys corresponding to all parent tables
before DROP TABLE replication.
* Fix wsrep_append_fk_parent_table() so that it works when it is
given a table list containing temporary tables.
* Make sure function wsrep_append_fk_parent_table() is only called
for local transaction. That was not the case for ALTER TABLE.
* Add a test case that verifies that UPDATE parent depends on
preceeding DROP TABLE child.
* Adapt galera_ddl_fk_conflict test to work with DROP TABLE as well.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The previous commit for fixing MDEV-35446 disabled setting
Galera errors on COM_STMT_PREPARE commands.
As a side effect, a number of tests were started to fail
due to the client receiving different error codes from the
ones expected in the test dependending on whether --ps-protocol
was used.
Also, in the case of test galera_ftwrl, it was found that
it is expected that during COM_STMT_PREPARE command, we
may perform a sync wait operation, which can fail with
LOCK_WAIT_TIMEOUT error.
The revised fix consists in anticipating the call to
wsrep_after_command_before_result(), so that we check for
BF aborts or errors during statement prepare, before sending
back the statement metadata message to client.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Test failed sporadically when --ps-protocol was enabled:
a transaction that was BF aborted on COMMIT would succeed
instead of reporting the expected deadlock error.
The reason for the failure was that, depending on timing,
the transaction was BF aborted while the COMMIT statement
was being prepared through a COM_STMT_PREPARE command.
In the failing cases, the transaction was BF aborted
after COM_STMT_PREPARE had already disabled the diagnostics
area of the client. Attempt to override the deadlock error
towards the end of dispatch_command() would be skipped,
resulting in a successful COMMIT even if the transaction
is aborted.
This bug affected the following MTR tests:
- galera_insert_multi
- galera_nopk_unicode
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Replication of non-transactional engines is experimental and
uses TOI. This naturally means that if there is open transaction
with transactional engine it's changes will be rolled back.
Fixed by adding error message if non-transactional engine
is part of multi-engine transaction with warning.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The problem was that when using clang + asan, we do not get a correct value
for the thread stack as some local variables are not allocated at the
normal stack.
It looks like that for example clang 18.1.3, when compiling with
-O2 -fsanitize=addressan it puts local variables and things allocated by
alloca() in other areas than on the stack.
The following code shows the issue
Thread 6 "mariadbd" hit Breakpoint 3, do_handle_one_connection
(connect=0x5080000027b8,
put_in_cache=<optimized out>) at sql/sql_connect.cc:1399
THD *thd;
1399 thd->thread_stack= (char*) &thd;
(gdb) p &thd
(THD **) 0x7fffedee7060
(gdb) p $sp
(void *) 0x7fffef4e7bc0
The address of thd is 24M away from the stack pointer
(gdb) info reg
...
rsp 0x7fffef4e7bc0 0x7fffef4e7bc0
...
r13 0x7fffedee7060 140737185214560
r13 is pointing to the address of the thd. Probably some kind of
"local stack" used by the sanitizer
I have verified this with gdb on a recursive call that calls alloca()
in a loop. In this case all objects was stored in a local heap,
not on the stack.
To solve this issue in a portable way, I have added two functions:
my_get_stack_pointer() returns the address of the current stack pointer.
The code is using asm instructions for intel 32/64 bit, powerpc,
arm 32/64 bit and sparc 32/64 bit.
Supported compilers are gcc, clang and MSVC.
For MSVC 64 bit we are using _AddressOfReturnAddress()
As a fallback for other compilers/arch we use the address of a local
variable.
my_get_stack_bounds() that will return the address of the base stack
and stack size using pthread_attr_getstack() or NtCurrentTed() with
fallback to using the address of a local variable and user provided
stack size.
Server changes are:
- Moving setting of thread_stack to THD::store_globals() using
my_get_stack_bounds().
- Removing setting of thd->thread_stack, except in functions that
allocates a lot on the stack before calling store_globals(). When
using estimates for stack start, we reduce stack_size with
MY_STACK_SAFE_MARGIN (8192) to take into account the stack used
before calling store_globals().
I also added a unittest, stack_allocation-t, to verify the new code.
Reviewed-by: Sergei Golubchik <serg@mariadb.org>
Search conditions were evaluated using val_int(), which was wrong.
Fixing the code to use val_bool() instead.
Details:
- Adding a new item_base_t::IS_COND flag which marks Items used
as <search condition> in WHERE, HAVING, JOIN ON, CASE WHEN clauses.
The flag is at the parse time.
These expressions must be evaluated using val_bool() rather than val_int().
Note, the optimizer creates more Items which are used as search conditions.
Most of these items are not marked with IS_COND yet. This is OK for now,
but eventually these Items can also be fixed to have the flag.
- Adding a method Item::is_cond() which tests if the Item has the IS_COND flag.
- Implementing Item_cache_bool. It evaluates the cached expression using
val_bool() rather than val_int().
Overriding Type_handler_bool::Item_get_cache() to create Item_cache_bool.
- Implementing Item::save_bool_in_field(). It uses val_bool() rather than
val_int() to evaluate the expression.
- Implementing Type_handler_bool::Item_save_in_field()
using Item::save_bool_in_field().
- Fixing all Item_bool_func descendants to implement a virtual val_bool()
rather than a virtual val_int().
- To find places where val_int() should be fixed to val_bool(), a few
DBUG_ASSERT(!is_cond()) where added into val_int() implementations
of selected (most frequent) classes:
Item_field
Item_str_func
Item_datefunc
Item_timefunc
Item_datetimefunc
Item_cache_bool
Item_bool_func
Item_func_hybrid_field_type
Item_basic_constant descendants
- Fixing all places where DBUG_ASSERT() happened during an "mtr" run
to use val_bool() instead of val_int().
Added new test scenario in galera.galera_bf_kill
test to make the issue surface. The tetst scenario has
a multi statement transaction containing a KILL command.
When the KILL is submitted, another transaction is
replicated, which causes BF abort for the KILL command
processing. Handling BF abort rollback while executing
KILL command causes node hanging, in this scenario.
sql_kill() and sql_kill_user() functions have now fix,
to perform implicit commit before starting the KILL command
execution. BEcause of the implicit commit, the KILL execution
will not happen inside transaction context anymore.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Replication of MyISAM and Aria DML is experimental and best
effort only. Earlier change make INSERT SELECT on both
MyISAM and Aria to replicate using TOI and STATEMENT
replication. Replication should happen only if user
has set needed wsrep_mode setting.
Note: This commit contains additional changes compared
to those already made for the 10.5 branch.
+ small refactoring after main fix.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Problem was that we did not found that table was partitioned
and then we should find what is actual underlaying storage
engine.
We should not use RSU for !InnoDB tables.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Replication of MyISAM and Aria DML is experimental and best
effort only. Earlier change make INSERT SELECT on both
MyISAM and Aria to replicate using TOI and STATEMENT
replication. Replication should happen only if user
has set needed wsrep_mode setting.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Commit a8a75ba2d causes the MariaDB server to crash, usually with signal
11, at random code locations due to invalid pointer values during any
table operation. This issue occurs when the server is built with -O3 and
other customized compiler flags.
For example, the command `use db1;` causes server to crash in the
`check_table_access` function at line sql_parse.cc:7080 because
`tables->correspondent_table` is an invalid pointer value of 0x1.
The crashes are due to undefined behavior from using uninitialized
variables. The problematic commit a8a75ba2d introduces code that
allocates memory and sets it to 0 using thd->calloc before initializing
it with a placement new operation.
This process depends on setting memory to 0 to initialize member
variables not explicitly set in the constructor. However, the compiler
can optimize out the memset/bfill, leading to uninitialized values and
unpredictable issues.
Once a constructor function initializes an object, any uninitialized
variables within that object are subject to undefined behavior. The
state of memory before the constructor runs, whether it involves
memset or was used for other purposes, is irrelevant after the
placement new operation.
This behavior can be demonstrated with this
[test](https://gcc.godbolt.org/z/5n87z1raG) I wrote to examine the
assembly code. The code in MariaDB can be abstracted to the following,
though it has many layers wrapped around it and more complex logic,
causing slight differences in optimization in the MariaDB build.
To summarize, on x86, the memset in the following code is optimized out
with both -O2 and -O3 in GCC 13, and is only preserved in the much older
GCC 4.9.
struct S {
int i; // uninitialized in consturctor
S() {};
};
int bar() {
void *buf = malloc(sizeof(S));
memset(buf, 0, sizeof(S)); // optimized out
S* s = new(buf) S;
return s->i;
}
With GCC13 -O3:
bar():
sub rsp, 8
mov edi, 4
call malloc
mov eax, DWORD PTR [rax]
add rsp, 8
ret
With GCC4.9 -O3
bar():
sub rsp, 8
mov edi, 4
call malloc
mov DWORD PTR [rax], 0
xor eax, eax
add rsp, 8
ret
Now we ensure the constructor initializes variables correctly by running
the reset() function in the constructor to perform the memset/bfill(0)
operation. After applying the fix, the crash is gone.
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services.
Address Sanitizer's know how to detect stack overrun, so there's
no point in us doing it.
As evidenced by perfschema tests where signficant test failures
because this function failed under ASAN (MDEV-33210).
Also, so since clang-16, we cannot assume much about how local
variables are allocated on the stack (MDEV-31605).
Disabling check idea thanks to Sanja.
Rectify cases of mismatched brackets and address
possible cases of division by zero by checking if
the denominator is zero before dividing.
No functional changes were made.
All new code of the whole pull request, including one or several
files that are either new files or modified ones, are contributed
under the BSD-new license. I am contributing on behalf of my
employer Amazon Web Services, Inc.
Having Item_func_not items in item trees breaks assumptions during the
optimization phase about transformation possibilities in fix_fields().
Remove Item_func_not by extending normalization during parsing.
Reviewed by Oleksandr Byelkin (sanja@mariadb.com)
New error codes can only be added in the latest major version.
Adding ER_KILL_DENIED_HIGH_PRIORITY would shift by one all
error codes that were added in MariaDB Server 10.6 or later.
This amends commit 1001dae186
Suggested by: Sergei Golubchik
Changed error code for Galera unkillable threads to
be ER_KILL_DENIED_HIGH_PRIORITY giving message
This is a high priority thread/query and cannot be killed
without the compromising consistency of the cluster
also a warning is produced
Thread %lld is [wsrep applier|high priority] and cannot be killed
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Adding the test for the length of lex->name into show_create_db().
Without this test writes beyond the end of db_name_buff were possible
upon a too long database name.
This is regression from commit 3228c08fa8. Problem is that
when table storage engine is determined there should be
check is table partitioned and if it is then determine
partition implementing storage engine.
Reported bug is reproducible only with --log-bin so make
sure tests changed by 3228c08fa8 and new test are run
with --log-bin and binlog disabled.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
Correct the second parameter for strxnmov to prevent potential buffer
overflows. The second parameter must be one less than the size of the
input buffer to avoid writing past the end of the buffer.
While the second parameter is usually correct, there are exceptions
that need fixing.
This commit addresses the issue within frm_file_exists() and other
affected places.
The patch for MDEV-31340 fixed the following bugs:
MDEV-33084 LASTVAL(t1) and LASTVAL(T1) do not work well with lower-case-table-names=0
MDEV-33085 Tables T1 and t1 do not work well with ENGINE=CSV and lower-case-table-names=0
MDEV-33086 SHOW OPEN TABLES IN DB1 -- is case insensitive with lower-case-table-names=0
MDEV-33088 Cannot create triggers in the database `MYSQL`
MDEV-33103 LOCK TABLE t1 AS t2 -- alias is not case sensitive with lower-case-table-names=0
MDEV-33108 TABLE_STATISTICS and INDEX_STATISTICS are case insensitive with lower-case-table-names=0
MDEV-33109 DROP DATABASE MYSQL -- does not drop SP with lower-case-table-names=0
MDEV-33110 HANDLER commands are case insensitive with lower-case-table-names=0
MDEV-33119 User is case insensitive in INFORMATION_SCHEMA.VIEWS
MDEV-33120 System log table names are case insensitive with lower-cast-table-names=0
Backporting the fixes from 11.5 to 10.5
Ideally our methods and functions should do one thing, do that well,
and do only that. add_table_to_list does far more than adding a
table to a list, so this commit factors the TABLE_LIST creation out
to a new TABLE_LIST constructor. It then uses placement new()
to create it in the correct memory area (result of thd->calloc).
Benefits of this approach:
1. add_table_to_list now returns as early as possible on an error
2. fewer side-effects incurred on creating the TABLE_LIST object
3. TABLE_LIST won't be calloc'd if copy_to_db fails
4. local declarations moved closer to their respective first uses
5. improved code readability and logical flow
Also factored a couple of other functions to keep the happy path
more to the left, which makes them easier to follow at a glance.
- Fix to avoid mysqltest client getting killed abruptly during
mysql_shutdown(). When Galera replication is shutdown, wait for
THDs with `thd->stmt_da()->is_eof()` to disconnect (these are about
to disconnect anyway).
- Extract duplicate code from `wsrep_stop_replication()` and
`wsrep_shutdown_replication()` in a new function.
- No need to use a custom `shutdown_mysqld.inc` in galera
suite. Delete it, so that the one in `mysql-test/include/` is used.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
There were several races in the main.kill_processlist-6619 testcase:
- Lingering connections from a previous test case could be visible in SHOW
PROCESSLIST and cause .result diff.
- A sync point "dispatch_command_end" was ineffective, as it was consumed at
the end of the SET DEBUG command itself.
- The signal from sync point "before_execute_sql_command" could override an
earlier signal, causing DEBUG_SYNC timeout and test failure.
- The final SHOW PROCESSLIST could occasionally see a connection in state
"Busy" instead of the expected "Sleep".
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
In case there is a view that queried from a stored routine or
a prepared statement and this temporary table is dropped between
executions of SP/PS, then it leads to hitting an assertion
at the SELECT_LEX::fix_prepare_information. The fired assertion
was added by the commit 85f2e4f8e8
(MDEV-32466: Potential memory leak on executing of create view statement).
Firing of this assertion means memory leaking on execution of SP/PS.
Moreover, if the added assert be commented out, different result sets
can be produced by the statement SELECT * FROM the hidden table.
Both hitting the assertion and different result sets have the same root
cause. This cause is usage of temporary table's metadata after the table
itself has been dropped. To fix the issue, reload the cache of stored
routines. To do it cache of stored routines is reset at the end of
execution of the function dispatch_command(). Next time any stored routine
be called it will be loaded from the table mysql.proc. This happens inside
the method Sp_handler::sp_cache_routine where loading of a stored routine
is performed in case it missed in cache. Loading is performed unconditionally
while previously it was controlled by the parameter lookup_only. By that
reason the signature of the method Sroutine_hash_entry::sp_cache_routine
was changed by removing unused parameter lookup_only.
Clearing of sp caches affects the test main.lock_sync since it forces
opening and locking the table mysql.proc but the test assumes that each
statement locks its tables once during its execution. To keep this invariant
the debug sync points with names "before_lock_tables_takes_lock" and
"after_lock_tables_takes_lock" are not activated on handling the table
mysql.proc
This will makes it easier to find out what replication workers are
doing and what they are waiting for.
Things changed in processlist:
- Slave_SQL time was not consistent. Now time for state "Slave has
read all relay log; waiting for more updates" shows how long it has
waited for getting the next event.
- Slave_worker threads did often show "Closing tables" for a long
time. Now the state is reverted to the previous state after
"Closing tables" is done.
- Commit and Rollback states where not shown for replication (and some
other threads). Now Commit and Rollback states are always shown and
the state is reverted to previous state when the Commit/Rollback
have finished.
Code changes:
- Added thd->set_time_for_next_stage() for parallel replication when
when starting to wait for prior transactions to commit, group commit,
and FTWRL and for free space in thread pool.
Before we reset the time only after the above events.
- Moved THD_STAGE_INFO(stage_rollback) and THD_STAGE_INFO(stage_commit)
from sql_parse.cc to transaction.cc to ensure this is done for
all commits and not only 'normal connection queries'.
Test case changes:
- close_thread_tables() reverting stage to previous stage caused the
counter in performance_schema to be increased. In many case it is
the 'sql/starting' stage that was effected.
- We only change to "Commit" stage if there is a need for a commit.
This caused some "Commit" stages to disapper from perfschema reports.
TODO in 11.#:
- Slave_IO always showes "Waiting for master to send event" and the time is
from SLAVE START. We should in 11.# change this to be the time since
reading the last event.
Problem was that REPLACE was using consistency check that started
TOI and we tried to rollback it.
Do not use wsrep_before_rollback and wsrep_after_rollback if
we are runing consistency check because no writeset keys are
in that case added. Do not allow consistency check usage
if table storage for target table is not InnoDB, instead
give warning. REPLACE|SELECT INTO ... SELECT will use
now TOI if table storage for target table is not InnoDB
to maintain consistency between galera nodes.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The old code collected a list of THD's, locked the THD's from getting
deleted by locking two mutex and then later in a separate loop
sent a kill signal to each THD.
The problem with this approach is that, as THD's can be reused,
the second time the THD is killed, the mutex can be taken in
different order, which signals failures in safe_mutex.
Fixed by sending the kill signal directly and not collect the THD's
in a list to be signaled later. This is the same approach we are using
in kill_zombie_dump_threads().
Other things:
- Reset safe_mutex_t->locked_mutex when freed (Safety fix)
